oerlikon 3 used for sale

Payload 5,000 kg Lifting height 15 meters Strand count 2 Load chain 10 x 30 Uncoiling of the hand chain per meter of stroke - 174 m Lifting capacity at nominal load 34 daN Weight approx. 115 kg 1 piece(s) in stock - unit price

The operating times are specified with 1387 h. However, this is the time that the printer was connected to the network. The pure printing time is 40 h The printer was serviced regularly until last year in March 2022. Technical data Model AGILISTA-3200W Printing material AR-M2 (transparent printing material), AR-H1 (heat-resistant printing material), AR-G1L (silicone rubber [low hardness]), AR-G1H (silicone rubber [high hardness]) Support material AR-S1 (water soluble support material) Installation space 297 × 210 × 200 mm (A4 size × 200 mm) Resolution 635 × 400 dpi Layer thickness High resolution AR-M2: 15 µm Normal resolution AR-M2: 20µm AR-H1: 20µm AR-G1L/H: 30µm Power supply Supply voltage 100 to 240 VAC, 50/60 Hz Power consumption Max. 750 VA Interface Ethernet 10BASE-T / 100BASE-TX Operation Interactive color touch panel Software Name Mode ...

Screw diameter 30 mm Foundation plan / installation plan (see machine layout above in the appendix), an extra foundation for the plant was not poured here Operating hours 12455h on 28.01.2021 Automatic cycle counter 743558 processed material PBT-GF 30 Ultradur B4300 G6 Q16 black Find more here - /

BHKW engine type HCI534E2 for sale Combustion engine TEDOM type DC16 1-013-826. The motor block was only completely replaced in May 23 It is still entitled to EEG compensation until 2031. Find more here - / Contact us at -

; Gross weight [kg]: 100

; Gross weight [kg]: 116

Control: Mazatrol Fusion 640M Technical data: X-axis: [mm] 1740 Y-axis: [mm] 760 Z-axis: [mm] 660 Max. speed: [1/min] 10.000 spindle motor: [kW] 15 tool holder: SK 40 tool places: 30 Equipment: Chip conveyor No internal cooling (IKZ) Find more here - /

Parker ICE 360, chiller Find more here - / Contact us at -

Keyence Agilista 3200. Yera 2017. Attached is a photo of the operating hours counter from January 19, 2013. In the meantime, around 100 hours of printing have been added. The device is technically in good condition. Find more here - / Contact us at -

Key data: 300 t

DURENDUS 300 T Workshop Press – Single Column Press – 1,600 mm Clear Width, 550 mm Stroke The machine shown here has already been built and delivered on behalf of a customer. We can manufacture this machine for you at very short notice – gladly taking individual options into account. It is a hydraulic workshop press for press-fitting, straightening and assembly work in the workshop and industrial sector. Base price: 22.450 € net Options (on request): The options listed are based on completed customer projects and enable the machine to be specifically adapted to the respective application. The basic machine represents a functional basic design – in practice, in most cases it is expanded with additional equipment and configured accordingly for the specific project. Table top with X-shaped T-slot 800 × 1,200 × 120 mm Pressure adjustment Lateral displacement  ...

Earthmoving Equipment for Sale John Deere Excavator 350G Category: Large Excavator Application: Heavy excavation, bulk earthworks, quarry & infrastructure Key Features: Powerful and fuel-efficient diesel engine Advanced hydraulic system for smooth multi-function operation Deep digging capability for large-scale projects Reinforced boom and arm for durability Comfortable operator cab with modern controls Ideal For: Road construction Mining & quarry operations Large foundation works John Deere Excavator 470P Category: Production-Class Excavator Application: High-production earthmoving and mass excavation Key Features: High horsepower and lifting capacity Optimized fuel consumption with advanced engine tech Smart hydraulic system for faster cycle times Heavy-duty undercarriage for tough terrain Operator-focused design for comfort and visibility Ideal F ...

Máquina serigráfica con 1 cabezal Área máx. impresión: 340 x 380 mm Ancho máx. de banda: 350 mm Diámetro máx. de bobina: 700 mm Registro por marca Desbobinador y rebobinador independiente Secado UV

SMG 320 cold forming press for sale. Year of build 1981 Model HPU 315-1300/1150 The machine has a crack in the head piece. Drive power: 2 x 55 KW Oil volume of one tank filling 3800 liters Maximum ram force: 3200 KN Drive cylinder: 3 pieces Cylinder 1: 2000 KN Cylinders 2+3: 600 KN each maximum adjustment: 310 mm Find more here - / Contact us at -

2014 KOCEVAR & SONS R-94-K0LQ-320/750-DD160 Find more here - / Contact us at -

The products to be welded are loaded into suitable holders on a rotary indexing table. Assembly takes place in station 1, laser welding in station 2. The cell is designed as a sit/stand workstation. The products are placed in a rotary indexing table. After turning the rotary indexing table, the machine starts automatically. The machine is equipped with an automatic rotary indexing table, with friction wheel drive. A light curtain is not required. The drive slips in the event of an unforeseen load. Laser welding machine WOLF "Quasisimultaneous" Laser welding machine for "Steller" with semi-automatic rotary indexing table PC and touch screen included Find more here - / Contact us at -

ZENO CMX 300 / NT 65 Mixing plant Type: CMX300 M.No.: 15A-6180Pos.25 Motor: 2x 30KW/55A Year of construction: approx. 2014 Weight: approx. 6000kg Dimensions: with access = L 5450 mm x W 3700 mm x H 1800 mm without access = L 3950 mm x W 1700 mm x H 1800 mm Conveyor belt: Type: NT 65 M.No.: 15A-6180Pos.24 Motor: 11KW/21A Year of construction: approx. 2014 Weight: approx. 5000kg Dimensions: with access = L 13000 mm x W 3300 mm x H 1500 mm without access = L 13000 mm x W 1300 mm x H 1500 mm Dl777x Mixer & conveyor belt are one component. Find more here - / Contact us at -

Sheet metal processing system P 315 / 1991 105327 Ai P4-1812+HPT 2015 + R51 272/ 1991 S4.30 / 1998 Find more here - / Contact us at -

IGM-Welding-Station IGM Robot Designation: Rti 330 Year of construction: 2005 1st welding unit Manufacturer: Fronius Hoist no.: 4,0750,100 Designation: Transpuls Synergie 4000 2nd welding unit Manufacturer: Fronius Hoist no.: : 4,075,097,R Designation: Transpuls Synergie 4000 Extraction system Manufacturer: Füchtenkötter Designation: FKPF 64/4 V Year of construction: 2005 Find more here - / Contact us at -

2000 HAIDA INTERNATIONAL D-E 702-3000K40 Testing chamber Find more here - / Contact us at -

1992 Masterwood MW21.31KS CNC drilling-milling machine Electric throttle (throttle n° ) Electric throttle - 11 fuggoleges + 6 horizontal - 11 ftie:e:oleges + 6 horizontal + furrow - 24.000 rpm 2.04. Noise level The noise level of the cheetah: MW 12.25 KS/ MW 15.38 KS/ MW 18.38 KS/ MW 21.31 KS/ MW 21.42 KS In accordance with 1SO7690 - EN848.3 Furas: - level of acoustic noise Leą at the operator´s load - the maximum power of the instantaneous acoustic footprint is less than - the acoustic difference under the LWA load is below Ćitvalastas: 19,5 dB (A) 130 dB (C) 99,2 dB (A) - level of acoustic noise Leą at the operator´s load: 82,5 dB (A) - the maximum power of the instantaneous acoustical noise is less than 130 dB (C) - the acoustic difference under LWA load is less than 103,4 dB (A) The tests were carried out with a Bruel & Kjaer 223 I precision integral sound  ...

2005 STRIKO WESTOFEN MH I-2 3000/2000 Charging system Oven Technical data: See pictures Find more here - / Contact us at -

2008 KRAUSS MAFFEI 175-520-390 CZ Injection moldin machine Machine was functional before conservation, for reuse is neccesary aditional checks and possible repair activities Find more here - / Contact us at -

; Gross weight [kg]: 594

; Gross weight [kg]: 560

A vulcanising press with 4 shelves, it was purchased as a spare for the currently used one and has been standing unused since new, in total it has worked for us 0h. Model XL8-350T-700x700x4 l´LC Pressure 350T 700x 700mm thickness 6()mm Hotplate resistance Ra:,I .6a (2.5 μm) - Type of heating electr. Max. temperature 200 ‘C Pressure on workplate approx. 7 I kg-´cm2 piston diameter I 600mm -f 500mm Hydraulic pressure 16Mpa Machine structure Ko1umno,-a Motor power .of hydtaulic station ,- 5.5kW Heating power for J..ai:d working plate 9 x 0.9kW= 8.lkW Weight p,-assembly approx. 12000 g Press dimensions : Approximately 2800x I 200,´350Chnin Find more here - / Contact us at -

max. 300 kg

2013 SAR/SEPRO SR 5X-35HL S5 TRANS Injection robot Machine where functional before conservation, obsolete robot version, retrofit could not be done. Find more here - / Contact us at -

Metallkraft MTBS 3100-40 D The Metallkraft MTBS 3100-40 D is a heavy-duty, motorized metal shear designed for industrial use. Cutting Capacity: Maximum cutting length: 3100 mm Maximum sheet thickness: 4.0 mm Construction and Design: Heavy and stable welded construction Low cutting angle (1.3 degrees) for minimal distortion and burr-free cuts Equipped with plastic-coated material hold-downs, manually adjustable width stop, and angle stop Motor and Performance: Motor power: 7.5 kW (10 HP) Voltage: 400 V, 3-phase Cutting speed: 42 cuts per minute Dimensions and Weight: Overall dimensions: 3650 mm x 2260 mm x 1330 mm Weight: Approximately 3600 kg Additional Features: Electrically adjustable rear stop up to 750 mm (optional up to 1000 mm) Ergonomic working height Self-lubricating and adjustable slideways High-quality roller bearings Operated via foot pedal, allowing hands ...

2012 Chiron DZ 12 KWM HS 328-03 Profile CNC machining centre Chiron milling machine - double-spindle - with pallet changer - HSK-A63 Accessories and tools are not included. We still have a few holders (shrink fit chucks) that we can provide. A chip conveyor from Knoll is included, as well as a cooling tower from DeltaTherm. Technical data Year of construction 2012 Axis travel: X 550 / Y 400 / Z 360 mm Spindle distance in X-axis: 250mm Weight: 7700kg Tool magazine: 16 places per spindle Tool holder HSK-A63 Fanuc 31i-A5 - 5-axis contouring control Fanuc tool life monitoring Integrated workpiece changing device IWW 0/180° Spindle speed 15000 rpm, max. 45Nm Speed acceleration / deceleration from 0 to 12000 rpm in 0.6 seconds Chip conveyor with scraper belt Coolant system KF 150/FKA500 Chiron maintenance instructions on screen Operating hours and parts counter Oil-fre ...

1996 Theissen and Bonnitz TB 314 QSM 65 Collating machine Hersteller (Manufacturer): Theisen & Bonitz GmbH, Burscheid, Germany Masch.-Typ (Machine Type): TB 314 QSM 65 Baujahr (Year of Manufacture): 1998 U (Voltage): 3~PE 400 V, 50 Hz P (Power): 1.9 kW Find more here - / Contact us at -

Berstorff ZE 90A x 36D compound extruder Dynamische Tragzahl: 633 kN(Dynamic Load Capacity) Theoretische Lebensdauer bei 120 bar und 300 l/min: 40,000 h(Theoretical Lifespan at 120 bar and 300 l/min) (Siehe Lebensdauerdiagramm, Punkt 8.3.4)(See Lifespan Diagram, Point 8.3.4) Anzahl der Vollzylinder (4 D): 1(Number of Full Cylinders (4D)) Heizleistung pro Zylinder: 9.2 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (4 D): 2(Number of Open Cylinders (4D)) (1x Füllzylinder 4D unbeheizt)(1x Fill Cylinder 4D Unheated) Heizleistung pro Zylinder: 6.8 kW(Heating Power per Cylinder) Anzahl der Vollzylinder (6D): 2(Number of Full Cylinders (6D)) Heizleistung pro Zylinder: 18.4 kW(Heating Power per Cylinder) Anzahl der offenen Zylinder (6D): 1(Number of Open Cylinders (6D)) Heizleistung pro Zylinder: 16.0 kW(Heating Power per Cylinder) Anzahl der Kombizylinder (6D): 1(Numb ...

Machine Model and Specifications: - Model: Torrefacteur 3000 - Capacity: 50 kg per batch - Power: 5 kW - Voltage: 380V/50Hz - Dimensions: 1.5m x 1.2m x 2.0m - Weight: 800 kg Operational Features: - Automatic temperature control - Programmable roasting profiles - Built-in cooling system - Advanced safety features including emergency stop and overheat protection Find more here - / Contact us at -

2016 Hexagon OC 322 Measuring machine The machine is in perfect working condition. The 2016 Hexagon OPTIV CLASSIC 322 is a type of coordinate measuring machine (CMM) manufactured by Hexagon Manufacturing Intelligence. This machine is used for precision measurement and quality control in manufacturing processes. PRODUCT DESCRIPTION The Optiv Classic 322 combines optical and tactile measurement in one system (optional touch-trigger probe). The system supports multi-sensor measurements using the Vision sensor (CMOS colour camera, motorised CNC zoom) and the touch-trigger probe HP-TM. The Optiv Classic 322 provides easy pallet station integration with good accessibility to the measuring table from all sides. Measurement software is PC-DMIS. FIELDS OF APPLICATION • Shop floor and inspection room • Versatile geometry measurements and GD&T analysis DESIGN Design principle : Ben ...

Sharpening machine Vollmer CAL 300 Left hand machine Specifications: Blade width: 100-420mm Blade length: from 8500mm Blade thickness: up to 2.8mm Tooth pitch: 20-120mm The height of the teeth up to 40mm Angle of attack up to 40 degrees Abrasive disc diameter: 300m Working speed 5-30 teeth/min Power 5.4 kVA/ 4.8 kW Weight approx 1600 kg Accessory: Oil vapor exhaust and filtration system Vollmer N170 emulsion filtration system Auxiliary feed for large blades Find more here - / Contact us at -

CNC lathe Type: Lynx 300 Manufacturer: Doosan Year: 2011 Control: Fanuc i Series Toolholders Machine in good condition, under power Find more here - / Contact us at -

BPM3928 Programming System - Description: 4-site system - CE Mark: Model 3900 APS - Included Features: Monitor arm, side, front & back door - Accessories/Modules: - 1x TS1500 Automated Tray Stacking System - V-TEK TM-50 MK2 Tape Output Media: - Supports up to 2D inspection cameras (8mm to 56mm tape width) - 3,000 Series Fiber Laser Marker - UltraVim UX 3D Coplanarity Inspection: - 3D Vision Inspection System for BGA, CSP, QFP, TSOP, SOIC, and QFN Find more here - / Contact us at -

CNC lathe Type: FTC 350 XLS Manufacturer: Feeler Year: 2014 Control: Fanuc Turning diam. above the bed: 630 mm Max.turning diameter: 350 mm Max.turning length: 870 mm Chip conveyor Toolholders Machine in good condition, under power. Find more here - / Contact us at -

Manufacturer: Joos Model: HP-S 360 Condition: used Machine Hours : 15.321 h Type of Machine: Press Find more here - / Contact us at -

Drive: . kW Capacity: . kg/h material: . 8 pieces For manipulator A5.1 Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Drive: . kW Capacity: . kg/h material: . 3 pieces Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us: More than 400 of our own machines in the warehouse More than 12,000 m² of storage space, crane capacity 70t. More than 1000 items Accessories for your workshopYou want to sell machines, production lines or your company,then contact us. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

AIRCOOLED CHILLER/HEAT PUMP EMICON PAE 361 KA 22 / 25 KW Cooling capacity: 22 kW / 6.3 tons (12/7 — 35°C) Heating capacity: 25 kW / 7.1 tons (40/45 — 7°C) Year of manufacture: 2024 Refrigerant circuit: 1 pcs. Heat exchanger: Plate Condenser: Copper-aluminum Type of refrigerant: R134a Compressors: 1 pcs. Copeland ZH92K4E-TWD-524 (scroll) Number of fans: 2 psc. Dimensions: 2.05x0.86x1.66 m. Weight: 433 kg. Condition: Never used, new

equipped with Iemca Boss 332E-r/32 new in 2007 - Fanuc 18i-TB control - chip conveyor - machinery still in production will arrive in our stock at the end of January.

roll diameter: 320 mm throat: 310 mm workpiece height: 230 mm table-size: 505 x 505 mm cutting speed: 12 - 375 m/min turning speeds: 39 - 1230 U/min saw band length: 2460 - 2620 mm voltage: 400 V total power requirement: 1,3 kW weight of the machine ca.: 420 kg dimensions of the machine ca.: 0,80 x 0,80 x 1,65 m welding equipment: IDEAL air blow equipment: - serial-no.: 22600-77/14 - with stepless feed - welding equipment IDEAL - grinding wheel - machine lamp The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Caterpillar 3516B-HD - New - 2500 kVa - JCN

Key data: 4 mm, 1 mm, 770 mm

Heidenhain iTNC 530 Travel: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Pendulum operation 2x 1,450 x 1,000 mm Mount: SK 50 Tool magazine: 30 – compartment Spindle speed: 30 - 4,500 rpm Accessories -Conveyor - Electronic handwheel - Coolant filter system -Partition - Vetter gantry crane 2 tons - Benz SK40 angle head with torque arm

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity for steel St40: 15.0 mm Mot. Adjustable rip fence: 1500 mm Mot. Adjustable cutting gap adjustment Cutting angle adjustment Working height: 860 mm Motor power: 22 kW Side protective grille with light barrier back Dimensions (length x width x height): approx. 4650 x 3600 x 2050 mm Weight: approx. 13,5-ton

Specifications: Max. cutting width: 3100 mm Max. cutting capacity for normal steel: 0.4 - 6.0 mm Max. cutting capacity for stainless steel: 4.0 mm Max. cutting capacity for aluminium: 8.0 mm Adjustable rip fence: 1050 mm CNC control Cutting gap adjustment via control Cutting angle adjustment via control: 0.4 – 2.2° Retraction function Sheet metal holding function Stroke rate: 33 cuts Min. Motor power: 5.5 kW Dimensions (length x width x height): approx. 3800 x 2300 x 1950 mm Weight: approx. 6,5 tons

Specifications: Maximum cutting width: 3100 mm Maximum cutting capacity steel St40: 10.0 mm Cutting gap adjustment adjustable rip fence Motor power: 15 kW Dimensions (length x width x height): approx. 3900 x 1950 x 2150 mm Weight: approx. 9,5 tons

Caterpillar 3516 DITA - Used - 2200 HP - 29Z