131,091 used machines on RESALE, but how to find them? Machine Search
P463 - used approx. 35 m³ / 35,000 L polyester tank, GRP tank, Erka tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GRP Manufacturer: Erka Specific gravity: min. 1.35 kg/L Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, cleaned and in good condition, completely repainted. Standing GRP storage tank on flat floor, dome on top of the roof, several inlets and outlets. Former calcium chloride tank. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily basis. As o ...
DUAL-SHAFT HYDRAULIC SHREDDER, Loading hopper, Sturdy supporting structure in carbon steel, shredding surface 1.300 x 960 mm ca, 2 counter-rotating steel shafts, 75 mm thick knives, 2 hooks, max speed 18 rpm, planetary gearbox, Hydraulic motor 90 kw (120Hp) 400 V/50 Hz (can be fitted with a 75 kw drive), hydraulic power unit,, 400 lt. oil tank, automatic overload reversal with programmable number of reverse cycles, control panel with electronic system to set maximum number of inversions, cooling fan, Complete with electrical drawings, user manual, CE compliance, Possible addition of loading and extraction belt with magnetic separator, width: 1.300mm, availability: 70 days ca, conditions: reconditioned, Power: 90 kw
1-deck swashscreen in stainless steel design with a screening area of 3.90 m² per deck, drive 5.5 kW via V-belt, equipped with pneumatic deck lifting system and clamping bracket system for easier screen change, incl. 1 piece sieve insert and 1 piece ball knocking device, also in stainless steel design.
Progressing cavity pump SCHUBAG 4,300 l/h with pre-prepared hopper Properties: Length 2750 mm Width 500 mm Total height 950 mm Weight 290 kg Motor power 5.5 kW Working pressure range 12 bar Material V2A (AISI 304) 1.4301
Flow rate: 6,300 l/h Operating pressure test 1.9 bar Motor: 5.5 kW Connections: suction side and discharge side: DN 65 - With chassis mobile with 2 swivel and 2 fixed castors - With cable and CE plug 16A Dimensions: Length: 750 mm Width: 500 mm Height: 1040 mm Note: Pump 100% tested, with function guarantee On request, infinitely variable with frequency converter for an additional cost.
Siemens steam turbine 3,370 kW nominal output. Speed: 11,500 r/min, live steam 80 bar, live steam 500 °C.
Heraeus Kendro UT 6120 Drying Oven For sale is a used laboratory heating furnace from Kendro Laboratory Products – model UT 6120, manufactured in Germany (Hanau). This instrument is ideal for laboratory applications, drying, heating and material testing up to 300°C. Technical details: Model No.: UT 6120 Order number: 51008822 Factory number: 99108504 Max. temperature: 300 °C Supply voltage: 230 V Frequency: 50 Hz Power consumption: 2.4 kW Current consumption: 10.2 A Protection class: Class 2 Degree of protection: IP 20 Temperature protection: DIN 12880/1 Connection type: 1N/PE Origin: Made in Germany (Hanau) Condition: Used, externally with slight signs of wear (see pictures). More items in other sizes - new and used - can be found in our shop! International shipping costs on request!
Replacement column for IDRA 3300, D330mm x 7410mm, (4), 240186, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7410mm, trapezoidal thread TR330 x 10, 4972 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7350mm, (5), PR11708354, die-cast servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column 5 for IDRA 3300, D330mm x 7350mm, trapezoidal thread TR 330 x 10, 4932 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7115mm, (6) 220735, die-cast Servive, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7115mm, (7), 220344, Strate/Idra, overhauled Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Refurbished! The column was overhauled by the company Strate, is in the original packaging and is in an immediately usable, top condition. We store them in a dry and thermally insulated room. The column can be viewed, checked and picked up at any time. We will also be happy to send you a sketch of the execution or deliver the goods to your address. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Replacement column for IDRA 3300, D330mm x 7115mm, (8), 102016, Strate/Idra, used Special price If you have a VAT number, we will be happy to issue you an invoice without VAT. Replacement column for IDRA 3300, D330mm x 7115mm, trapezoidal thread TR 330 x 10, 4775 kg Used The column is in a used condition and is still functional. However, the surface of the column already has many surface defects. The column can be used as a reserve for emergencies or as raw material for a new D300 column. That's why this column will be sold at a particularly low price. Attention: We offer various columns, adjustment nuts, spar nuts and 2 piece nuts of: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Naughty: D375, D330, D300
Complete line for carbonated soft drinks and carbonated mineral water capacity: 5.300 bph by 500 ml PET bottles neck size: PCO1881 working hours: approx. 28,000 hrs. consisting of: 1. Kosme KSB 4R PET stretch blow moulding machine year of manufacturing 2018 includes: preform hopper/elevator, preform unscrambler and ATS mould chiller. 2. Air conveyor 3. Caronation Techniques E0526 mixer year of manufacturing 2016 4. Filler Kosme Barifill with 16 filling heads year of manufacturing: 2017 with AVE capper year of manufacturing 1999 5. Heuft Basic inspection unit 6. Kosme labeller year of manufacturing 2018 7. Conveyors (mixed) 8. SMI LSK 30T shrink packer and tunnel packing format: 3x2 year of manufacturing 2005 9. Videojet 1530 date coder 10. Logopak case labeller year of manufacturing 2012 11. Robopac Roto ...
NEW, 200 cm width, 0.84 m³ capacity, 303 kg dead weight, with JCB Q fit mount
NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment
NEW, width: 1.76 m, 590 kg net weight, 460 l capacity, 245 max. bar, with original Kramer 5075 mount, with 1/2 quick coupling set & hoses, electrical kit for doubling the hydraulic circuit
NEW, 300 cm working width, approx. 2.20 m³ capacity, 800 kg weight, with JCB Q fit attachment
NEW, 300 cm width, with approx. 4 m³ capacity, dead weight 1600 kg, with Hardox scraper bar, with CAT 908 attachment,
Impact crusher with inlet opening 1,000 mm x 350 mm, throughput capacity: up to 30 to./h (manufacturer's specs), maximum feed size: 300 mm, required drive: 37 kW. Except for the drive, all parts (doors, inlet, etc.) are available, but currently not assembled. The scope of delivery also includes an extensive wear parts package.
Diagonal duct fan, 3x230V, 500mm, 9880m³/h, TDE 500 D4, Red Ring, mint condition -40% Special price If you have a VAT number, we will gladly issue you an invoice without VAT. As good as new! The parts were purchased from a company's spare parts warehouse, were in their original packaging, show only very minor signs of storage, have never been used and are completely new. Diagonal tube fan, 3x230V, 500mm, 9880m³/h, 1.5 KW, TDE 500 D4, Red Ring, as good as new -40% Aluminium housing and impeller 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and cond ...
Belt conveyor 1.34m with drive Length: 134cm Width: 50cm Height: 90cm Complete plant closure, large selection of mezzanines, pallet racks, shelving racks, paternosters. High Quality Industrial Machinery, Lathes, Grinding Machines, Hand Machinery Suppliers in China More items - new and used - can be found in our shop! International shipping costs on request!
Axial piston pump, AE A10VS0 71 DFR1/31R-PPA12N00, R910948730, Original! Rexroth, new Attention: This is an original Rexroth product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Axial piston pump, AE A10VS0 71 DFR1/31R-PPA12N00, R910948730, Original! Rexroth, new Dr=200 bar, 1500 rpm, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and condit ...
Bystronic Byspeed 3015 Bylaser 5200 ARC Control: ByVision Suction Donaldson Car Charge-Discharge System Auction-ID: A7-32339-2
Cutting length: 4,300 mm Control: Power Control Scoring saw: 2.2 kW Cutting depth: 2,200 mm Software: CADmatic 4.0 Saw blade guard: 95 mm Collets: 7 pieces Main saw blade: 350 mm Scoring saw blade: 180 mm Air table: 4 Saw carriage speed forward: 1 - 150 m/min Saw carriage feed return: 150 m/min Program slider feed flow: 90 (EU max. 25) Program slide feed return: 90 m/min Main motor: 13.5 kW equipment: Central angle pressure device Label printer integrated into print bars Completely gloomy machine table Automatic pressure beam height control Automatic cutting height Adjustable contact pressure pressure beam (soft-touch package) Adjustable Contact Pressure Collets (Soft-Touch Package) 5 to. Lift table 1 Power-Concept collet (can be positioned independently of the program slider) Speed Package Groove program Label printer PICA 108 Auction-ID: A7-32339-3
- Producer Finnrose - Working width 1.400 mm - Diameter roller 65 mm - Roller pitch 100 mm - alle Rollen mit Gummioberfläche - Feed speed infinitely adjustable by hand wheel - Feed speed ca. 2 - 8 m/min - Length 3.410 mm - Voltage / HZ 400 V / 50 HZ - Location, in stock D-32825 Blomberg
Panel size: 1350 x 3000 mm Pressing capacity: 90 ton Plate Type: Hard Aluminum Plates Travel+opening 400mm Cylinders 6 pieces Electric boiler 18 KW V400/50 Ce version Myler protective film for an easy Fast and efficient cleaning of the press surface All-round tension via spring system of the Myler protective film
200 sectional doors 5100 x 3100 mm Manufacturer: various Type: Sectional roller shutter Quantity: approx. 200 pieces Width: 5100 mm Clear height: 3500 mm Year of Make: 2002 Drive: no electric drive Design: partly with integrated door, partly without door Location: Paderborn
elsto Type F603 UH60 P112 3 chamfer 380 volt 400 volt 3 KW 27 RPM Center 60 mm Center 230 mm L 70cm W 30cm H 60cm All employees speak Dutch, German and English. Prices are exclusive of VAT. Shipping is possible (at an additional cost). (Subject to changes and errors in technical data, information and prices as well as prior sale.)
For sale are new exhaust gas outlets for the turbocharger Condition: new (traces of storage available) Part Number: 37732 05500 We have other parts from JCB and Mitsubishi available If you have any further questions, please do not hesitate to contact us!
Condition Used Brand Siemens Type ZR88-LA132SP4EW Voltage Volt 3 fase 400 volt Force KW 5,5 KW - 137 Nm Rotational speed RPM 384 RPM Shaft size mm 60 mm Flens pasrand 250 mm Version Eigen gewicht 170 kilo Length 110.00cm Width 35.00cm Height 35.00cm Related Products All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
Condition Unused Brand SEW-Eurodrive Type RX57 DRS71M4 / AND8 Voltage Volt 3 fase 380 volt 400 volt Force KW 0,55 KW Rotational speed RPM 364 RPM Shaft size mm 20 mm Length 40.00cm Width 23.00cm Height 20.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
Condition New, old stock Brand SEW Eurodrive Type S37 DRN80M4/BE1/EI7C Voltage Volt 3 fase 400 volt Force KW 0,75 KW Rotational speed RPM 363 RPM Shaft size mm 20 mm Version Brake Length 51.00cm Width 21.00cm Height 15.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
Lift system, Megamat, shelf size: 2.24 x 0.61m, height approx. 4.26m, 360kg / shelf – used - : Price ex location: 15.950.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat / Kardex Year of Make: 2001 Type: Megalift 14436/50/4260 Device number: 70744 Max. load capacity per tray: 360kg Permissible total load: 40,000kg Device height: approx. 4.26m Width: approx. 2.45m Depth: approx. 2.45m Number of shelves approx. 60 pieces (still to be verified on Tuesday, 24.3.26) Dimensions shelves: approx. 2,248mm x 612mm 3/N/PE 230/400V, 12A, fuse supply cable 16A Condition: used Available: immediately Location: D-77728 Oppenau
Condition Used Brand VEM Type ZG3 MR A112 M4 Voltage Volt 3 fase 380 volt 400 volt Force KW 5,5 KW Rotational speed RPM 315 RPM Shaft size mm 48 mm Flens pasrand 180 mm Length 70.00cm Width 24.00cm Height 32.00cm All employees speak Dutch, German, and English. Prices are exclusive of VAT. Shipping is possible (for an additional charge). (Changes and errors in technical data, information, and prices as well as prior sale are reserved.)
Geared motor, electric motor, electric geared motor -Manufacturer: SEW-Eurodrive, gearmotor type WAF20 DR63S2/TF -Speed: 332 rpm -Power: 0.18 kW -Hollow shaft: Ø 20 x 100 mm -Flange: Ø 110 mm /Shaft Ø 15 x 30 mm -Protection class: IP55 -Number: 2x gear motors available -Price: per piece -Dimensions: 360/190/H250 mm -Weight: 7.7 kg/piece
Servo motor, electric motor, DC motor -Servo motor: comes from a machining center BJM type KF-10 -Power motor: 1.45 kW/voltage: 560 V -Max. Speed: 3000 rpm -Torque: 6.3 Nm -Brake: 24 VDC -Gearbox: manufacturer Atlanta type 5883109 i = 9.25 -Hollow shaft: Ø 25 x 120 mm -Dimensions: 530/200/H175 mm -Weight: 20 kg
Gear motor, electric motor, electric gear motor -Manufacturer: SSB, gear motor from automatic saw, drill and mill Rapid DGL / BFA -Type: DSG-012 / 20-0410.208.40 - K1 - B5 -Gearbox: Type 012 i = 6.98 -Speed: 380/40 rpm -Power: 0.75 kW -Construction: B14 Hole circle: O 100 mm (O10 mm) - Shaft: O 20 x 40 mm -Protection class: IP 44 -Brake: 24 V 1.3 A. -Dimensions: 515/230 / H170 mm -Weight: 22 kg
Servo motor, electric motor, DC motor, stepper motor, stepper motor, stepping motor -Manufacturer: Scharmann, DC motor from a Scharmann table boring mill -Power: 3 - 11 kW -Speed: 220 - 3200 rpm -techn. Data: see photo nameplate -Shaft: Ø 45 x 104 mm -Construction: B3 -Dimensions: 1000/550 / H450 mm -Weight: 509 kg
Planetary winch gear, hydraulic motor, oil motor, hydraulic pump, hydraulic gear motor, drive unit - Manufacturer: Quadrangle, hydraulic motor drive unit -Type: 1302027STB1-0 -Operating pressure: 350 bar -Hydraulic motor: Rexroth A2FE125 / 61W-VAL 181 -Planetary gear: Bonfiglioli 715 C 3 B15FO129J2 -Individual components: see photos -Number: 2x unit available -Price per piece -Dimensions: 820/550 / H840 mm -Weight: 587 kg / pc.
Servo motor, electric motor, DC motor -Geared motor comes: from a plasma cutting machine -Manufacturer: SATO -Type: SATRONIK -Max. Speed: 3000/96 rpm -Power: 0.21 kW -Torque motor: Nm -Shaft: Ø mm -Construction: B5 -Gearbox manufacturer: alpha Getriebebau -Type: TP 010-MF2-31 -Translation: 1:31 -Dimensions: 380/118/H130 mm -Weight: 7.5 kg
Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley -Handover in its current condition as inspected -2 pieces: Transport trolley as a semi-finished product, still without controls and steering. -All 4 wheels are steerable -Heavy-duty transport trolley, max. load capacity: 3000 kg -Load capacity per wheel: 750 kg -Price: complete -Transport dimensions: 2670/440/H430 mm -Empty weight: 598 kg
Key bar chuck, three-jaw chuck, three-jaw lathe chuck, power chuck, pneumatic chuck -Bake -Chuck size: Ø 300 mm -with base plate: 400 x 330 mm -Jaw height: 125 mm -Foot switch available for an additional charge -Number: 2 power chucks available -Price: per piece -Dimensions: 400/330/H285 mm -Weight: 84 kg
Hydraulic power unit, hydraulic pump, hydraulic pump, hydraulic test pump -Hydraulic unit with: 2x motors and oil cooler -2x hydraulic pumps: from Truninger type QT23-005/22-005 -per pump max. Pressure: 320 bar -per pump max. Liter output: 7.9 l/min (5 cm³/U) -1x drive: 11 kW 1460 rpm -1x drive: 5.5 kW 1460 rpm -Hydraulic filter -Hydraulic tank -Oil cooler with: fan -Dimensions: 1500/1100/H1900 mm -Weight: 845 kg
adjustable gear motor, variable speed gear motor, electric motor -Motor power: 0.37 kW -Speed range with angular gear: 60-308 rpm -Motor: adjustable -Diameter hollow shaft: Ø 19 mm -Construction: B5 angle -Number: 1 piece of motors available -Price: per piece -Dimensions: 440/170/H180 mm -Weight: 13 kg
Gear motor, electric motor, electric gear motor -Power: 0.25 kW -Diameter hollow shaft: 22 mm -Speed: hollow shaft 91 rpm -Diameter shaft: 11 mm -Speed shaft: 380 rpm -Construction: hollow shaft -Protection class: IP 44 -Brake -Number: 1x engine available -Price: per piece -Dimensions: 370/210/H175 mm -Weight: 15 kg
Geared motor, electric motor, electric geared motor -Electric geared motor: for crane cable reel -Features: External fan, no brake -Speed: 3.7 rpm -Power: 300 Nm -Design: B3 -Shaft diameter: 40 mm -Protection class: IP 44 -Quantity: 1x motor available -Price: per piece -Dimensions: 760/260/H300 mm -Weight: 51 kg
adjustable gear motor, variable speed gear motor, electric motor -Manufacturer variable speed gearbox Nord type: SK01R-63L-4-100LU -Motor power: 0.18 kW -Speed range: 68-340 rpm -Motor: adjustable -Height of shaft axis: 102 mm -Drive shaft: Ø 20 mm -Construction: B3 -Number: 3 motors available -Price: per piece -Dimensions: 465/180/H310 mm -Weight: 20.55 kg
Geared motor, electric motor, electric geared motor -Engine manufacturer: VEM -Manufacturer of gearbox: VEM -Speed: 315 rpm -Power: 1.1 kW -Design: B5 -Bolt circle: Ø 165 mm -Recess: Ø 130 mm -Shaft diameter: 28 mm -Protection class: IP 44 -Number: 2x motors available -Price: per piece -Dimensions: 430/198/H250 mm -Weight: 29 kg
Stacking boxes, stacking boxes, plastic boxes, euro stacking boxes, transport basket, stacking basket, euro stacking containers, euro stacking containers, small load carriers -External dimensions: 400/300/H220 mm -Interior dimensions: 340/268/H200 mm -Quantity: 144 pieces of boxes available -Piece: 6 euros net from stock -Minimum order quantity: 5 pcs -for larger purchases: price on request -Own weight: 1.5 kg/piece
maximum number of results exceeded
please refine your search
32.500 € 
