oerlikon 3 used for sale

Auction-ID: A1-46768-31

Equipped with ground cable and welding pliers

Press force [ton] 100 Max. working width [mm] 3600 Column gap [mm] 3300 Throat depth [mm] 250 Backgauge depth [mm] 600 Max. stroke [mm] 120

Stored in working condition, with 2 new band saws.

Soldering iron in metal case see pictures

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

SKF / FAG - Batch bearings 335KG

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

Series No.: 803852, speed max. 2,500 / 3,000 rpm, spindle stroke max. 80 mm

Combination machine, sheet metal roller, bending and cutting Bevel max. 1 mm. Rollers max. 1 mm. Cut max. 1 mm. Width of segments 25 - 50 - 75 - 75 - 105 mm. Maximum working width 305 mm. Diameter of the rollers 38 mm. Maximum bending angle 90 degrees. Condition: never used / new (5)

Serial Number: B3M92108096AC Voltage: 380 V Frequency: 50 Hz Power: 14 kVA Engine power: 7.5 kVA Strokes: 760 x 430 x 500 mm Pin Type: BT 40 – 8000 rpm Tool changer: 24 positions Equipment: 4th axis Order: Ultimax 3 Status: Sold without tools and in the condition

SKF - 331714A - Large industrial bearing 1x

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg

LDK - PHS18 / PHS18L - Batch of rod ends

saw cap. 1650x900x1250 mm; equipped with clamping device

3m roller conveyor with manual length stop. Working length 3000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 900 kg Height adjustment 650 - 1100 mm Machine weight approx. 0.050 t Dimensions L x W x H 3.1 x 0.45 x 0.6 m Condition: never used / new (5)

ul> Distance between heads: 3000 mm Diameter above the bench: 800 mm Lathe equipped with a fixed bezel Digital visualization MINILEXPRO 3-jaw chuck Manual tailstock Lots sold as is, unchecked, without tools or tool holders.

Working length 2000 mm Working width 360 mm Roll width 360 mm Roll diameter 60 mm Load capacity 800 kg Height adjustment 650 - 950 mm Machine weight approx. 0.045 t Dimensions L x W x H 2.07 x 0.48 x 0.21 m Condition: never used / new (5)

Table adjustable in height

Automatic wave saw Saw blade 315mm max. shaft diameter 90mm Speeds 9 - 45 rpm Motor 3.0KW See pictures Condition: unchecked (6)

2 machine vices, as good as new and unused Jaw width: 150 mm Jaw height: 50 mm Clamping distance: 300 mm incl. ring wrench, clamping claws, stop and slot nuts Transport dimensions: 800 x 600 x 400 mm, approx. 75 kg

Weight approx. 12000-15000 kg, cutting capacity for steel 16 mm, cutting capacity for stainless steel 10-12 mm, adjustable back gauge

Equipped with ground cable and welding pliers

FAG / SKF - Batch of industrial bearings 354KG

This jet cabin is included as standard: Blasting gun 4-piece nozzle set Set of gloves Lighting Set of protective films Foot pedal. Pressure regulators Suction with microfilter Internal dimensions 945 x 605 x 605 mm Operating pressure 2.2 - 5.5 bar Dimensions L x W x H 1.0 x 0.61 x 1.65 m Package size max. 1300 x 1000 x 75 cm Machine weight approx. 0.09 t The system is delivered in black Condition: never used / new (5)

Voltage: 380 - 400 V Phase: 3 Hertz: 50 Hz Output current: 40 - 350 A Duty cycle: 80% Welding wire: 0.80 - 1.2 mm Weld plate thickness: 0.5 - 12 mm Accessories: Gas-protected welding gun (5 mm) European plug (50 mm²) Earth terminal (2 m) 36 V gas control Features: IGBT MAG / MIG, MMA & Lift TIG Dual pulse function VRD 2T/4T function 4-drive feeder 5-language support 18 sets Packed in 2 boxes: 730x420x900 and 550x330x400

Nimak Power Source, Model GT 350; Nimak Cooling Unit, Model KS 2

Cold circular saws with: Saw blade diameter max.350 mm Cutting range: around 110 mm Cutting range: square 100 mm 2 saw blade speeds Machine weight approx. 0.65 t Space requirements approx. 0.8 x 1.0 x 1.85 m Condition: unchecked (6)

Manual: saw feed and clamping device, mitre: 45-90-45- 30 degrees, Including: roller track 525 cm long with length stop up to 5000mm, and chip container, as well as spare saw blades for steel, VA and Allu, coolant lubrication available, gear version adjustable with two speeds,

Machine number: 232597 Operating voltage: 400 V Nominal current: 32 A Belt length: 5080 mm Control: SIEMENS SIMATIC HMI Material support height: 1200 mm Roller diameter: 630 mm Projection: 370 mm Maximum cutting height: 320 mm Guide rod (hydraulic stroke): 200 mm Belt tension (hydraulic stroke): 60 mm Sawing parameters - Belt speed: 250 - 2000 m/min incl. roller conveyor width: 350 mm Reference: Heraeus

Profile bending machine with: - 1 set of standard rollers - 2 rollers are driven - Working horizontally or vertically Round material solid 30 mm Square material solid 30 mm Flat steel 50 x 10 mm Angle steel mm Axle diameter 30 mm Working speed 6.0 rpm Roller diameter - tools 132 mm Total power requirement 0.75 kW Machine weight approx. 0.25 kg Dimensions approx. 0.6 x 0.8 x 1.3 m

Wood band saw Thanks to the heavy cast-iron table, the wood band saw offers good stability. The machine has a longitudinal guide and a mitre guide and is supplied with a saw blade. Roll diameter 400 mm Cutting height 200 mm Cutting width 350 mm Motor power 1.5 kW Table size 400 x 500 mm Table tilt 45 degrees Saw blade length 2950 mm Condition: never used / new (5)

equipped with digital readout with tip-button operation; incl. press brake tools

Unused, 3 phases, welding wire 0.80-1.2mm, output current 40-350A, 18 sets welding data memory, 2T / 4T function, double pulse function VRD, 4 drive supply, 5 total support

Capacity: 3,224 kW Volts: 400 HZ: 50 Condition: Very Good Scope of Supply: Complete Turbine Power Station with turbine and alternator, Control Panel, Condensor, Cooling Towers, Spilling Unit, Switchgear, Synchronisation panel, Transformer, Piping / wiring / pumps. Total cost for power plant components was around 3 million on the actual power plant components. Nominal Steam requirement to run the turbine is 17, 5 t/h at 29 barg & 350 °C. Available for sale from Gas Engine Exchange. Please check our full range of equipment at gasengineexchange.com.

Equipment: - Brown colour - 2 connections aeration / de-aeration DN 40 - Level - Thermometer - Taster - Oval manhole - Partial drain Friedrich n°2 40 - Total drain Friedrich n°2 40 Dimensions : - Depth: 1450 mm - Width : 1100 mm - Height : 2200 mm

Automatic evisceration line of 3000 birds/hour 8'' line. - Vent cutter machine 12 / 8" - Opening machine 12/8" - Eviscerator 12/8" - Cropper machine - Neck cutter and puller machine - Final inspection machine - Bird unloader machine - Feet cutter and Transfer System , including spare part

Charger (loading and unloading), High: 2,000 mm, Long: 2.700 mm, Width: 2.100 mm, Weight: 6.580 kg, Voltage: 220/380 V, Total power: 28Kw, Accessories included: Feeder / Feeder, Grinding wheel width: 250 mm, Regulating wheel width: 250 mm, Ø min / max to grinding: 3/125 mm, Control type ((cnc / manual): Manual, Maximum infeed grinding length: 250 mm, Regulating wheel dimensions (od x id x width): 350 x 250 x 125 mm, Ø grinding wheel dimensions (od x id x width): 500 x 250 x 304.8mm

WEISS AGGLOMERATOR, for LDPE LLDPE HDPE PP PS PET, complete with loading belt, metal detector, dual chamber system, n.2 rotating knives on each chamber, n.2 x 160 kw drives, control panel + electric cabinet, including :, extraction blower, pipes, cyclone, bag holding structure, INSTALLED POWER: 320 kw, capacity: 1.000 kg/h, PRESENT CONDITIONS: disconnected, SERVICES AVAILABLE: full reconditioning on separate offer

In great contition. Was replaced due to instalation of a new bigger compressor. Needs to change central bearing. Sale without quarantee, as is where is.

Blobel Spill Barrier can be rotated on one side The ideal solution if you want to secure the area of a lifting platform or dock leveller. The barrier is stationary and can be rotated on one side, easy to handle, versatile and flexibly convertible from manual to automatic. The rotating and clamping device is permanently mounted next to the opening to be secured and sealed against the structure. The locking body is screwed into the swivel joint and stands vertically next to the opening in the resting position. It is secured against unintentional folding down in accordance with the UVV. In the event of an emergency, the fuse is unlocked, the leak lock is folded down and locked in the clamping device. The contact pressure of the clamping lever is adjustable, ensuring a secure seal. In the basic version, the barrier body is folded down manually, and an automatic system can be ...

Orginal prechamber spark plug 1245-3556 For variable MWM TCG2020 v12/v16/v20 & Caterpillar CG170 -v12/v16/v20 engines. Natural gas 5pcs new

P445 - used approx. 35 m³ / 35,000 L polyester tank, GF-UP tank, Staffelstein tank, standing on flat bottom. Technical details: Content: approx. 35 m³ / 35,000 litres Material: Polyester / GF-UP Manufacturer: Staffelstein Theodor Vanck Dimensions: approx. Ø 3.00 m × H Tank 5.20 m / H total 5.70 m Other: Used polyester tank, professionally cleaned and in good condition. Vertical GF-UP storage tank on flat bottom, dome on top of the roof, several inlets and outlets. Former salt brine tank. Roof was repainted. Only the pure tank is sold, without add-on parts such as pipes, fittings and accessories. The container can be used as a storage tank for many different media such as water, liquid feed, whey, etc., or as a rainwater collection tank. Price on request. Transport can be organised at a reasonable price. It is not possible to update all of our listings on a daily b ...

Mobile telephony mast, galvanised Height: approx. 39 m Weight: approx. 80 tons Type: above-ground incl. precast concrete foundations