oerlikon 3 used for sale

General SKU217K043 LocationBarneveld MakeBHS Sonthofen GmbH TypeAutopress AP-300/4 No.305013 Main Features MaterialStainless steel Surface0.5 m2 Specified Features - Filterpress MaterialStainless steel Filter pressGas-tight, fully automatic filter press(1x) Filter surface0,5 m2 Stainless steel plates(1.4571) Number of platens4 + 1x top- and 1x bottom plate Internal platen sizesdia. 310mm Cake capacity5 Ltr (at 20mm plate distance) Hydraulic closingcheck With hydraulic unitcheck Motor3,0 KW, 400/690 Volt (Ex) Information Year of construction2000 Floorspace2,9x1,2 M Total height2,0 M Weight2000 KG ATEX compatiblecheck Technical specs Extra informationinternal platen size: dia. 310 mm FilterpressesBHS SonthofenFilters > FilterpressesBrand > BHS Sonthofen What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Re ...

This AMADA EMZ 3610 NT was manufactured in 2008. It features a press force of 300 kN, can handle material up to 4.5 mm thick, and supports a maximum table load of 160 kg. The machine includes 45 turret stations with auto-index and achieves a stroke rate of 1000 strokes/min. If you are looking to get high-quality punching capabilities consider the AMADA EMZ 3610 NT machine we have for sale. Contact us for more information.

General SKU244K212 MakeAlexanderwerk LocationBarneveld TypeR-300 Main Features MaterialStainless steel Motor3.6 KW Width300 mm Specified Features - Sieve granulator Granulating sieveGrater/shredder (1x) Sieve sizesdia. 300x130mm Sieve perforationdia. 10mm, Without hopper Inletdia. 270mm Motor3,6 KW, 230/400 Volt (Ex) MaterialStainless steel Information No.039-09709 Year of constructionunknown Mounted on wheelscheck With switchcheck Floor space1,1x1,2 M Total height1,3 M Weight340 KGSieve granulatorsAlexanderwerkSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis LVD Phoenix FL 3015 was manufactured in 2019 and features an 8 kW IPG laser source, capable of handling sheet sizes up to 3000 × 1500 mm. It boasts a rapid positioning speed of 140 m/min and can support a maximum sheet weight of 900 kg. If you are looking to get high-quality cutting capabilities, consider the LVD Phoenix FL 3015 machine we have for sale. Contact us for more information.

General SKU232P229 LocationBarneveld MakeRietschle Thomas (DE) TypeSMV 300 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pumpvacuum Number of pumps:1x Capacity300 m3/h With motor7,5 KW, 690/400 Volt Inletdia.60mm Outletdia.38mm MaterialMild steel Information Mach.No.manufacturing tag is missing Year of construction+/- 2003 Floorspace1,3x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200 mbar abs.)Vacuum pumpsRietschlePumps > Vacuum pumpsBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machin ...

This 3s LVD Orion 3015 Plus was manufactured in 2013. It features a powerful 2500 W Fanuc HF-excited CO₂ laser, capable of cutting various materials with a maximum sheet size of 3000 × 1500 mm and a weight of 570 kg. The machine offers impressive positioning speeds of 100 m/min on the X/Y axes. Consider the opportunity to buy this LVD Orion 3015 Plus fiber laser cutting machine. Contact us for further details.

General SKU232P230 LocationBarneveld MakeRietschle Thomas (DE) TypeSMV 300 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pumpvacuum Number of pumps:1x Capacity300 m3/h With motor7,5 KW, 690/400 Volt Inletdia.60mm Outletdia.38mm MaterialMild steel Information Mach.No.301438950001 Year of construction+/- 2003 Floorspace1,2x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200 mbar abs.)Vacuum pumpsRietschlePumps > Vacuum pumpsBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3s TRUMPF TruLaser 3030 Fiber cutting machine was manufactured in 2014. It features a powerful 3,000 W TruDisk 3001 solid-state fiber laser, with a maximum cutting capacity for mild steel up to 20 mm. The machine offers impressive positioning speeds and a spacious working area, making it suitable for various applications. Consider the opportunity to buy this TRUMPF TruLaser 3030 Fiber cutting machine. Contact us for further details.

General SKU900WP038 MakeLAUDA TypeIT HW 350-Ex LocationBarneveld Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Information Extra Specifications20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., pressure 10 bar, heat transfer fluid water, manufactured in 2003, Serial number B17 276, CE 0036 certified , EX II 2 G EEx edm [ia] IIC T3. : :For control cabinet see 900WP034Temperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please  ...

This 5-axis Bystronic Xpert 250/3100 press brake was manufactured in 2014. It features a press force of 2500 kN, bending length of 3100 mm, and a throat depth of 400 mm. The machine includes a robust 22 kW main motor and operates with high precision. If you are looking to get high-quality bending capabilities, consider the Bystronic Xpert 250/3100 machine we have for sale. Contact us for more information about this machine.

General SKUR1211 MakeEstrella AG (CH) LocationBarneveld Type3400 Ltr. Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume3400 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel MaterialGlass - Enamel Capacity3400 Ltr (nett.2500 Ltr) Vessel sizesdia.1600mm x1970mm Dished topcheck Dished bottomcheck ManholeDN500 Top connections2x DN200, 4x DN80 OutletDN80 Max. temperature100 degr.C. Pressure vessels Closed vertical tankcheck Capacity3400 Ltr (nett.2500 Ltr) Vessel sizesdia.1600mm x1970mm Dished topcheck Dished bottomcheck ManholeDN500 Top connections2x DN200, 4x DN80 OutletDN80 Max. temperature100 degr.C. Information No.84172 Year of construction1985 Mounted on legscheck Floorspace1.8x1.8 M Total height2.2 M Weight2000 KgPressure vesselsEstrellaTanks > Pressure vesselsBrand > Estrella What you c ...

This Hesse AD-S 30175 press brake was manufactured in 2017. It features a robust 3050 x 175 TON capacity, a stroke of 265 mm, and operates on a supply voltage of 3 x 400 Volt. Weighing 10830 kg, it ensures stability and precision in operation. If you are looking to get high-quality bending capabilities, consider the Hesse AD-S 30175 machine we have for sale. Contact us for more information.

General SKU232P232 MakeRietschle Thomas (DE) TypeSMV 300 Mach.No.1024770314 Year of construction2003 Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump MaterialMild steel Pumpvacuum Number of pumps:1x Capacity300 m3/h With motor7,5 KW, 690/400 Volt Inletdia.60mm Outletdia.38mm Information LocationBarneveld Floorspace1,3x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200 mbar abs.)Vacuum pumpsRietschlePumps > Vacuum pumpsBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This PROFILATOR VF-320-L was manufactured in 2015. A Modular Gear Machining Center, it features a flexible system for dry machining with multiple process modules tailored to specific needs. Key features include programmable synchronization, modular design, and suitability for dry machining. Ideal for automotive gearbox components and high-precision gear components. If you are looking to get high-quality gear machining capabilities, consider the PROFILATOR VF-320-L machine we have for sale. Contact us for more information.

This Kocevar & Sons R-94-K0LQ-320/750-DD160 was manufactured in 2014. It features a rotary table with NC-controlled indexing and direct drive, motorized spindles for operations like drilling and milling, and an automatic loading/unloading system. Ideal for high-volume serial production of automotive or industrial components. For more information about this machine, please reach out to us.

General SKU316S530 Makeunknown LocationBarneveld Typeunknown Main Features MaterialStainless steel Volume300 Ltr. Specified Features - Vertical tank MaterialStainless steel Closed vertical tankcheck Capacity300 Ltr. (nett. 240 Ltr.) Vessel sizesdia. 600x1100 mm With covercheck Dished bottomcheck Manholedia. 180 mm Top connectionsdia. 63 mm Outletdia. 22 mm With jacketcheck Without motorcheck Information No.unknown Year of constructionunknown Mounted on legscheck With switchas is Floorspace1,2x1,2 m Total height2,1 m Weight450 kgVertical tanks-Tanks > Vertical tanksBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis Exeron EDM 313 was manufactured in 2012. It features a control type 313 and operates with advanced software including exoUI V2.0.0.40. The machine has a total of 17,633 operating hours, with 7,830 hours on the control. If you are looking to get high-quality die-sinking capabilities, consider the Exeron EDM 313 machine we have for sale. Contact us for further details.

General SKU900WP034 MakeLAUDA TypeIT HW 350-Ex LocationBarneveld Main Features Heating (medium)Electric Capacity20 KW Temp.120 °C Specified Features - Temperature control unit Temperating machinecheck Information Extra Specifications20kW Lauda process heater , power consumtion 22,7 kW, 32,9 A, Ex IIGEExed [Ia] IICT3, heat transfer fluid water +5. . . +120°C, min flow rate 3 m³/h., manufactured in 2003, Serial number B17 275, CE 0036 certified. Control cabinet also for Lauda process heaters 900WP037 and 900WP038Temperature control unitsLaudaHeat exchangers > Temperature control unitsBrand > Lauda What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis CHARMILLES Roboform 350 die-sinking EDM machine was manufactured in 2006. It features travel paths of 350 x 250 x 300 mm and can accommodate a maximum electrode weight of 25 kg. The machine has a power consumption of 7.5 kVA and weighs 2350 kg. If you are looking to get high-quality die-sinking capabilities, consider the CHARMILLES Roboform 350 machine we have for sale. Contact us for further details.

General SKU262M321 LocationBarneveld Main Features MaterialStainless steel Volume300 Ltr. Motor0.75 KW Specified Features - Stirring vessel MaterialStainless steel Open stirring vessel(1x) Capacity300 Ltr. Vessel sizesdia. 785x619mm Flat top sidecheck With covercheck Top connectionsdia. 20mm Outletdia. 70mm With jacketcheck With propellor stirrercheck Motor0,75 KW, 220/380 Volt (Ex) Speed mixing shaft1400 Rpm Information Makeunknown manufacturer plate is missing Mounted on legs(verrijdbaar) With switch(Ex) Floorspace1,1x1,1 M Total height1,4 M Weight400 KG ATEX compatiblecheckStirring vessels-Stirring vessels > Stirring vesselsBrand > - What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands ...

This 3-axis KOMPAS F 2030 Industry was manufactured in 2019 and features a 3000x2000mm working area. It includes an automatic Mach3 CNC control for feeding, sawing, and milling, with a maximum speed of 10,000 mm/min. The machine is equipped with a 3 kW milling motor, angle-adjustable circular saw, pneumatic clamping, and a chip extraction system. If you are looking to get high-quality milling capabilities, consider the KOMPAS F 2030 machine we have for sale. Contact us for more information.

This HOMAG KAL 330/6/A3/S2 was manufactured in 2009. A used edgebander featuring a gluing unit for EVA hot melt adhesive, pressure zone, cutting unit, copy milling, scrapers, and a buffing unit. Includes a LIGMATECH workpiece returning system. Consider the opportunity to buy this HOMAG KAL 330/6/A3/S2 edgebander. Contact us for more information.

General SKU201S008 MakeNivoba (NL) TypeFS 250-32L LocationBarneveld CEcheck Main Features MaterialStainless steel Motor2.2 KW Surface32 m2 Specified Features - Rotating vacuum filter Rotating vacuum filtercheck Filter surface32 m2 Drum sizesdia 2500x4050mm Motor2,2 kW 220-240/380-415 volt Drum speed0,3-3 rpm With stirrercheck Motor3 kW 230/415 volt With knife dischargecheck Mechanical operatedcheck Motor0,12 kW 220-240/380-45 volt With vacuum pumpSpeck Pumpen (3x) typeVH0800-41-30-009 (1x), ASK6501-13-60003 (2x) Motor30 kW 300/690 volt, 7,5 kW 400/690 volt With liquid pumpcheck Motor4 kW 400/690 volt MaterialStainless steel 1.4301 (304) Information No.1988-09135 Year of construction2007 With switchgear(as is) Floorspace5,7x3,5 M Total height3,1 M Weight12000 Kg Technical specs Extra information.Rotating vacuum filtersNivoba VeendamFilters > Rotating vac ...

This Husky E 3150 RS 170 155 was manufactured in 1997. It features a clamping force of 31,500 kN, a screw diameter of 155 mm, and a shot weight of 9,642 g. Ideal for large-scale production, it has a stroke volume of 13,205 cm³ and an injection pressure of 1,636 bar. For more information about this machine, please reach out to us.

General SKU308M560 MakeBrabender Technologie TypeDDW-MD5-FW40/3plus-35 No.03035305896 Year of construction2004 Mounted on framecheck Main Features MaterialStainless steel Motor0.55 KW Specified Features - Metering screw Metering screwcheck With hopper(valbuis) Hopper sizesdia. 700mm to dia. 190mm, height 1,8m Inletdia. 200mm Outletdia. 150mm With motor0,55kW Metering screws MaterialStainless steel Information LocationBarneveld Floorspace1,4x0,8m Total height2,3m Weight350kg Technical specs Extra informationhopper dia. 700mm to dia. 190mm, height 1,8mMetering screwsBrabenderDosing units > Metering screwsBrand > Brabender What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us i ...

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

General SKU232P231 MakeRietschle Thomas (DE) TypeSMV 300 Year of construction+/- 2003 LocationBarneveld Pressure Working pressure0.2 Bar Vacuum possiblecheck Main Features MaterialMild steel Volume300000 Ltr. Motor7.5 KW Specified Features - Vacuum pump Pumpvacuum Number of pumps:1x Capacity300 m3/h Inletdia.60mm Outletdia.38mm MaterialMild steel Information Floorspace1,3x0,8 M Total height0,7 M Weight250 KG Technical specs Extra informationvacuum (200mbar abs.)Vacuum pumpsRietschlePumps > Vacuum pumpsBrand > Rietschle What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Engel DUO 3550/400 pico was manufactured in 2013. It features a clamping force of 4,000 kN, a screw diameter of 80 mm, and a maximum injection volume of 1,960 cm³. The machine dimensions are 7,420 × 2,360 × 2,360 mm, and it weighs 11,000 kg. It is equipped with a robot interface Euromap 67. Contact us for more information about this machine.

General SKU311M522 LocationBarneveld MakeSiebtechnik gmbh TypeTS 360 EK No.4940 Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck Screw diameter/Drum dia.360 mm Screw length/ Drum L= 2020 mm Motor15 KW, 575 Volt 60 Hz Max. rotor speed4000 rpm MaterialStainless steel 1.4571 (316Ti) Information Year of construction1997 Floorspace2,3x1,6 M Total height1,2 M Weight1750 KGDecantersSiebtechnikCentrifuges > DecantersBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This DEMAG ET 330 - 1450 hydraulic injection moulding machine was manufactured in 1995. It features a clamping force of 3300 kN and a screw diameter of 60 mm, providing robust performance for various applications. The machine includes a Wittmann W322-121 linear robot for enhanced automation. Consider the opportunity to buy this DEMAG ET 330 - 1450 hydraulic injection moulding machine. Contact us for further details.

General SKU212T107 MakeHinke Tankbau GmbH. No.8493 Year of construction2002 Mounted on legscheck Pressure Working pressure1 Bar Vacuum possiblecheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume340 Ltr. Pressure1 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4571 (316Ti) Notified body(TUV) Capacity340 Ltr. Vessel sizesdia. 700x1000 mm Dished topcheck Dished bottomcheck Top connectionsDN 100, DN25 (2x) OutletDN80, DN50, DN25 Max. temperature120 °C With paddle stirrercheck Motor0,75 kW 230/400 Volt (EX) Speed mixing shaft750 rpm Information LocationBarneveld Floorspace0,9x0,9 m Total height2,3 m Weight350 kg CEcheck ATEX compatiblecheckPressure vesselsHinkeTanks > Pressure vesselsBrand > Hinke What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compare ...

This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.

General SKUR1402 MakeSiebtechnik GmbH (D) LocationBarneveld CEcheck TypeConthick H450/340 V Worm/screen centrifuge Main Features MaterialStainless steel Motor15 KW Specified Features - Decanter Decantercheck Screw diameter340mm Screw length345mm InletDia: 50mm Liquid outletDia: 80mm Solids outletDia: 125mm Motor15 kW 400/690 Volt Max. rotor speeddecanter drum 2031 rpm (operational 942 rpm), sieve drum 1534rpm ( operational 712 rpm) MaterialStainless steel 1.4571 (316Ti) Information No.6545 Year of construction2013 Floorspace2,0x1,7 M Total height1,5 M Weight1.800 KG Extra SpecificationsDecanter drum ID 450mm Screen drum ID 340mm DecantersSiebtechnikCentrifuges > DecantersBrand > Siebtechnik What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome ...

This Toyo Si-350-6S JH750E-PACK was manufactured in 2022. It features a clamping force of 3430 kN, screw diameter of 60 mm, and an injection speed of 300 mm/s. With a total installed power of 85.6 kW and dimensions of 8073 × 1930 × 2397 mm, it represents a robust choice for precision molding. Contact us for more information about this machine.

General SKU169K585 MakeLUWA TypeARD 300 No.20065 Year of construction1970 LocationBarneveld Pressure Working pressure1 Bar Main Features MaterialStainless steel Volume200 Ltr. Motor1.1 KW Specified Features - Extraction ExtractorLiquid-Liquid extraction Diameterdia. 300 mm Max. temperature100 degr. C Motor0,75 kW 380/220 V Ex With variable speed drivecheck MaterialStainless steel Information Floorspace4,1 x 0,7 M Total height0,7 M Weight440 KGExtractionDiscountLuwa-smsColumns > ExtractionDiscountBrand > Luwa-sms What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

General SKU340S627 LocationBarneveld MakeKEK Kemutec TypeK300 Main Features MaterialStainless steel Motor0.55 KW Length300 mm Specified Features - Rotating sieve Rotating sievecheck Screw sizesdia. 90x200mm Inletdia. 60mm Outletdia. 50mm (2x) With inspection hatch225x125mm Motor0,55 kW 380-420 Volt With sieve cagecheck Sieve perforation5x5mm MaterialStainless steel Information Year of constructionunknown manufacturer plate is missing Floor space1,2x0,4 M Total height0,8 M Weight150 KgRotating sievesKek KemutecSieves > Rotating sievesBrand > Kek Kemutec What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.

General SKUR1376 LocationBarneveld MakePfeiffer Vacuum (D) Main Features Volume50000 Ltr. Motor3 KW Information TypeRevoDry 50 / HRH 300 Mach.No.21136412 Year of construction2009 Mounted on wheelscheck With switchgearcheck Floorspace1,1x0,7 M Total height1,6 M Weight325 Kg Extra SpecificationsPfeiffer vacuum pumping station with TRH 261 turbo pump and RevoDry dry vacuum pump Vacuum pumpsPfeifferPumps > Vacuum pumpsBrand > Pfeiffer What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

This 3-axis Arburg Allrounder 920S 5000-3200 hydraulic injection moulding machine was manufactured in 2007. It features a maximum clamping force of 5,000 kN, a screw diameter range of 70 to 90 mm, and a maximum shot weight up to 1,860 g. Consider the opportunity to buy this Arburg Allrounder 920S hydraulic injection moulding machine. Contact us for more information about this machine.

General SKUR1083 MakeDynamic Air (USA) LocationBarneveld CEcheck TypeBella B320E-XN Main Features MaterialStainless steel Volume320 Ltr. Motor15 KW Specified Features - Paddle mixer MaterialStainless steel 1.4404 (316L) Paddle mixercheck Double shaftcheck Useful capacity320 ltr Trough sizes1325x1105x850mm With cover(2x) Inletdia. 260mm (1x) dia. 115mm (1x) dia. 100mm (1x) Outlet1200x160mm (2x) Glands air purgedcheck Motor15 kW 380-420/660-725 volt (2x) Speed mixing shaft112 rpm Information No.1096976 Year of construction2009 Floor space2,6x1,4 M Total height1,7 M Weight1000 KgPaddle mixersDynamic AirMixers > Paddle mixersBrand > Dynamic Air What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherl ...

This CLOOS QRH 390 was manufactured in 2013. It features a QRH 390 with a QIROX Controller V6 and a C-stand MH=24330. Equipped with advanced welding technology and an extraction system, this welding robot is ideal for enhancing your production capabilities. Contact us for more information about this machine.

General SKU397M538 LocationBarneveld MakeHeinrich Nowak Apparate- u. Behalterbau No.7894 Pressure Working pressure1 Bar Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume325 Ltr. Specified Features - Stirring vessel Open stirring vesselcheck Capacity325 ltr Vessel sizesdia. 0,6x1,2 M Dished bottomcheck Flat top sidecheck With covercheck Manholedia. 350mm OutletDN65 With jacket2x DN40 Max. temperature50 gr.C. With homogenisercheck Motorcheck MaterialStainless steel Information Year of construction1986 Mounted on legscheck Floorspace1,2x1,0 M Total height2,5 M Weight500 KGStirring vesselsHeinrich NowakStirring vessels > Stirring vesselsBrand > Heinrich Nowak What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to i ...

Cutting range at 90° Round: 210 mm Square: 210 mm Flat: 240 x 190 mm Cutting range at 45° Round: 150 mm Square: 150 x 100 mm flat: 150 x 100 mm Saw blade dimensions: 400 x 30 x 1.5 mm 2 lifting speeds by pole switching. Motor: 16 & 32 m/min Drive motor: 380 V, 0.9 kW Weight: 170 kg Space requirement: 1190 x 480 x 1300 mm

General SKU414S1011 MakeThermo Electron Corporation (USA) LocationBarneveld CEcheck TypeModel 371 Steri Cycle CO2 Incubator Main Features MaterialStainless steel Specified Features - Drying oven Climate boxcheck Capacity± 120 Ltr. Internal width450mm Internal depth490mm Internal height550mm Electric heatingcheck Number of doors:1 MaterialStainless steel Information No.305691-2222 Mach.No.305691-2222 Year of construction2006 Floorspace0,7x0,7 m Total height1,0 m Weight100 kg Extra Specificationsincluding 4 baskets 360x360x80mm including 1 stainless steel container 280x210x60mm Drying ovensThermo ElectronDryers > Drying ovensBrand > Thermo Electron What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Net ...

Key data: 560 mm, 560 mm, 660 mm

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

STIERLI - Bender 300 U / Horizontal bending machine -Year of construction 2011 -CE marking -Max. working pressure 300KN -Stroke length 300mm -Motor power 4 KW -Hand switch -Footswitch -Various matrices -Bending tools -Stop -Documentation Dimensions: LxWxH 1.5x1.2x1.3 meters / Weight 800Kg

greates pass round over bed: 520 mm swing diameter over bed slide: 480 mm turning length: 3000 mm control: 840 D SIEMENS number of tools: 12 Driven tools - quantity: 6 spindle bore: 103 mm c-axis: ja 0 weight of the machine ca.: t dimensions of the machine ca.: m Scope of delivery of the basic machine: SINUMERIK 840 D 3 controlled axes Rotation Ø over bed 520 mm Turning Ø over bed slide 480 mm Tool carrier with 12 cylindrical shank holders Ø 50 mm 1-stage AC main drive, 53 kW, 50 % ED Speed range 30 - 3000 min-¹ Main spindle head size 8 Clamping door for clamping devices chip conveyor THREE-DIMENSION 3000 mm 12 cylindrical shank holders DIN 69880-50x78 of which 6 positions can be equipped with driven tools, Power 6 kW at 60 % ED, speed range 20-2500 min-¹ 2 gear stages C-AXLE Speed range 0-20 min-¹ Max. Angle specification 9999.999° Working range according to work area diagram POW ...

Guillotine Shears WEIKA 3200x10mm -Exhibition Machine / Unused -Cutting length 3200mm -Max. cutting thickness - steel 10mm Hjbkn Auowatxgj S Tjl - Max. cutting thickness - stainless steel 6mm -Max. cutting thickness - aluminum 12mm -Electric digital backgauge -Footswitch -Light barrier / Right -Left -Front support with ball rollers -Drive power 11KW Dimensions: LxWxH 4x2x1.9 meters / Weight 8000Kg

turning diameter: 80 mm turning length: 800 mm control: OSP-U100L total power requirement: 22 kW weight of the machine ca.: 6,3 t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 3500 kN

Ferromatics Milacron K-TEC 350-2650 / Production line with the Sepro robot Year of Make: 2017 Injection unit: Screw diameter: 70 mm Injection weight: 1104 g Spray pressure: 2175 bar Dosing volume: 1213 ccm Clamping unit: Clamping force: 350 t Handlebar spacing: 750x750 mm Size of the clamping plates: 1110x1165 mm Ejector: hydraulic Clamping unit: hydraulic Control: MOSAIC - Touch Screen Additional equipment: Very good technical condition High-speed machine Operating hours: approx. 10,000 h in automatic mode Euromap 67 Robot interface Air Valve x 5 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Parallel movements Machine with cylinder / battery with compressed nitrogen (extra charge for fast working) Energy-efficient machine – has a system with 3 hydrauli ...