133,956 used machines on RESALE, but how to find them? Machine Search
Key data: 3200 V, 11000
CATERPILLAR 3616 3.2MW GENERATING SET Fuel: Natural gas HZ: 50 Scope of supply: Engine, alternator, baseframe. Available for sale from Gas Engine Exchange. Please check our complete range of equipment at gasengineexchange.com.
General SKU407W1309 MakeTDA GmbH LocationBarneveld Pressure Working pressure0.1 Bar Main Features MaterialStainless steel Volume38750 Ltr. Specified Features - Silo Capacity38,75 m3 Vessel sizesDia. 5500x8100 mm Conical bottomcheck ManholeDN600 Top connectionscheck OutletDN250 Max. temperature120°C Silos MaterialStainless steel 1.4571 (316Ti) Silocheck Closedcheck Capacity38,75 m3 Diameter2750 mm Cylindrical height5900 mm Conical height2200 mm ManholeDN600 Information No.4947 Year of construction2000 Floorspace3,60x3,60 m Total height9,00 m Weight5000 kgSilosTDA GmbHTanks > SilosBrand > TDA GmbH What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ma ...
Key data: 3000 mm, 13 mm, 1000 mm
Description of the used machine • Angle stop • Support arms • Controlled backgauge 1000mm Hfoboh Dm H Ioqxim Iqjb • Swing cut shears • Light barrier for rear space protection • Secure finger protection thanks to grilles • Foot switch with emergency stop switch and safety line • Rotatable knives • Touchscreen control Used, well-preserved guillotine shears Durma SBT 3013 Swing-cut shear with sheet metal fixation via hydraulic hold-down holders. Make: Durmazlar Model No.: SBT 3013 Year of Make: 2009 Technical data: Sheet width 3100 mm Max. sheet thickness 13 mm (400 N/mm2) Connected load 30.0 KW Cutting angle° 1.45° Weight approx. 8000 KG Table width 600 mm Table height 845 mm Number of hold-downs 16 Space requirement (LxWxH) approx. L 4.25 x W 3.85 (plus VAT) support arms) x H 2.2 m Adjustable back gauge 1000 mm Year of construction 2009 ...
Press brake Ermaksan AP 3100 160 good condition Type AP 3100-160 tons Capacity 160 tons Bending length 3100 mm Motor power 11KW Lowering speed 80 mm/s. Weight 9200 KG Width 2180 mm Length 3500 mm Height 2780 mm Hfjbqxieq Ewufem Iqjb The machine can be viewed at any time by appointment.
x-travel: mm y-travel: mm z-travel: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
x-travel: 880 mm y-travel: 630 mm z-travel: 630 mm control: iTNC 530 Heidenhain Main spindle:: turning speed range - main spindle: max. 18.000 min/-1 power capacity - main spindel: 28 / 19 kW max. Torque: 121 Nm tool taper: HSK-A 63 swivellable: B: +30° / -120 ° NC-Rotary table:: table surface area: Ø 700 / 1.250 x 700 mm max. table load: 650 kg rotatable: C: 360 ° tool magazin:: number of toolpositions: 2x16 pos. tool taper: HSK-A 63 max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool weight: 8,0 kg max. tool length: 315 mm feeds:: feed speeds: max. 30.000 mm/min rapid traverse: 30 m/min total power requirement: 48 kVA weight of the machine ca.: 14,0 t dimensions of the machine ca.: 4,5 x 4,0 x 2,6 m Documents: Chip conveyor: Coolantsystem: elektr. hand wheel: test probe: Heidenhain TS 640 Laser: Blum Operation mode 4: Rotary screen: Signal lamp - 4 ...
2007 Prefamac 30kg chocolate tempering machine with enrobing belt (with blower), offtake belt, vibrating table and 2x heating lamps.
CONTROLS PC controller BECKHOFF PRESS DESIGN number of slide actions: 13 SLIDE slide force: 3 to stroke: 60 mm stroke rate (max.): 210 /min SLIDE (MECHAN. PRESS) slide adjustment: 6 mm variable speed: yes stroke rate (min.): 70 /min stroke rate (max.): 210 /min main drive power: 4 kW DIMENSIONS / WEIGHTS space requirements -left/right-: 2300 mm space requirements -front/back-: 1000 mm total height: 1900 mm total weight approx.: 4000 kg
General SKU262X271 LocationBarneveld MakeProminox TypeCuve Pressure Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume403 Ltr. Motor2.2 KW Specified Features - Processing vessel MaterialStainless steel 1.4435 (316L) Processing vessels Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. ManholeDia. 204 mm OutletDN51 Motor2,2 kW, 230/400 volt, 1400 rpm Closed stirring vesselcheck Capacity403 l., (300 l.) Vessel sizesDia. 1000x900 l. Conical bottomcheck Dished top sidecheck ManholeDia. 204 mm Top connectionscheck OutletDN50 Half coil jacketedcheck volume 13,3 l. Max. temperature150°C With anchor stirrercheck with scraper With dissolver stirrercheck Motor2,2 kW, 230/400 volt, 1400 rpm Speed mixing shaft5,3/32 rpm Motor5,5 kW, 240/380 volt, 1460 rpm Information No.30430 Year of construction2000 Mounte ...
A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.
Bosch ampoule compact system, fully automatic line for washing, sterilizing, filling and closing ampoules of 1 ml., 2 ml., 3 ml., 5 & 10 ml. consisting of Bosch RRU 3040 washing machine, possible container diameter 8-32 mm, Bosch HQS 2030 hot air sterilization tunnel, Bosch ALK 3040 filling and sealing machine incl. laminar flow hood, possible container diameter 9-26 mm, container height 35-75 mm, magazine, including format parts for DIN ampoules of 1 + 2 ml. (Ø10, 75 mm), 3 ml. (Ø12.75 mm), 5 ml. Ø14.75 and 10 ml. (Ø17.75 mm), output up to 12,000 ampoules per hour.
Parallel Lathe SCULFORT type MAXICAP SENIOR 380 x 4000 RN Between points: 4000 mm Maxi Ø on bench: Ø 780 mm Maxi Ø over saddle: Ø 580 mm (rear trolley dismantled) - Ø 500 mm (without rear trolley dismantled) Maxi diameter in brocken bed: Ø 1160 mm Width in brocken bed: 400 mm Spindle: Ø 80 mm Spindle speed: from 16 to 1280 RPM Square turret 3-jaws chuck Ø 400 mm Threadings: Metric + Withworth 3 points steady max Ø 350 mm Tailstock CM6 Motor power: 13 CV Feeds: auto transverse + longitudinal Clutch rapid used Lubricant tank Dimensions (L x W x H): 6500 x 1800 x 1900 mm Weight: approx 7 T
Suction Feeder, 2 Pockets, Compressor, Table Folding Machine
General SKU307X457 LocationBarneveld MakeGauthier Pressure Working pressure3 Bar Main Features MaterialStainless steel Surface0.38 m2 Specified Features - Nutsche filter MaterialStainless steel 1.4301 (304) Nutsche filtercheck Filter surface0,38 m² Capacity0,27 m³ Vessel sizesDia. 700x700 mm Plate sizesDia. 700 mm Top connectionscheck Solids outletDia. 25 mm Liquid outletDia. 15 mm Information TypePPO.FM 1049 Mach.No.5862 Year of constructionunknown Mounted on wheelscheck Floorspace0,80x1,00 m Total height1,60 m Weight650 kgNutsche filtersGauthierFilters > Nutsche filtersBrand > Gauthier What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more mach ...
General SKU335X737 MakeMöstl Anlagenbau GmbH LocationBarneveld CEcheck Type327 Ltr. Pressure Working pressure4 Bar Vacuum possiblecheck Working pressure jacket4 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume327 Ltr. Motor0.25 KW Pressure4 Bar Specified Features - Stainless Steel Reactor Reactorcheck CapacityPooling tank Vessel sizesø 750 x 981 mm Dished bottomcheck Dished top sidecheck Top connectionscheck Outletcheck DN40 (with valve) With jacketcheck (35 L) Max. temperature0 / 170 °C With propellor stirrercheck (magnetic) Motor0,25 kW 230/400 V 2713 rpm Stainless Steel Reactors MaterialStainless steel 1.4435 (316L) Capacity327 l. Vessel sizesDia. 750x981 mm Dished topcheck Dished bottomcheck With covercheck DN700 Top connectionscheck OutletDN40 with valve Max. temperature0°C/+150 ...
General SKU388X977 MakeZirbus TypeVTS 300 LocationBarneveld CEcheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) Information No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hFreeze dryersZirbusDryers > Freeze dryersBrand > Zirbus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...
General SKU214X079 MakeCollin LocationBarneveld TypeW110 AP x 350 Main Features Motor1.5 KW Width350 mm Specified Features - Mixing mill Motor1,5 kW, 380 volt, 1410 rpm Mill width350 mm Mill diametre110 mm With variatorcheck 3-36 rpm With temperature controlcheck 20-270°C Electrical heatingcheck Information No.1130-25-08 Year of construction2008 With switchgearcheck Floorspace1,50x0,60 m Total height1,80 m Weight570 kg Extra SpecificationsTesting Roll mill, Roll diameter 110 mm, roll face width 350 mm, operating width 265 mm, nip width 0,1-5 mm :Mixing millsIQAP TechnologiesPlastic machinery > Mixing millsBrand > IQAP Technologies What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please ...
General SKU213X072 LocationBarneveld MakeHosokawa Nautamix NV Haarlem (NL) Pressure Working pressure jacket0.5 Bar Main Features MaterialStainless steel Volume300 Ltr. Motor1.5 KW Specified Features - Conical mixer Conical mixercheck Capacity300 l. Largest cone diameter1200 mm Cone height1600 mm Dished topcheck Top drivecheck Motor1,5 kW, 230/400 volt, 1459 rpm Motorca. 0,4 kW Cantilevered screwcheck With jacketcheck Bottom dischargeDia. 270 mm MaterialStainless steel 1.4301 (304) Information TypeDBX-300 No.M18123 With switchgearcheck Floor space1,40x1,40 m Total height2,40 m Weight800 kgConical mixersHosokawa NautaMixers > Conical mixersBrand > Hosokawa Nauta What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in ...
General SKU422U1327 LocationBarneveld MakeBucher Guyer AG Pressure Vacuum possiblecheck Working pressure trays2 Bar Main Features MaterialStainless steel Volume5000 Ltr. Surface30 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface30m² Drying chamber capacity5 m3 Drying chamber sizes1991x2080x1420 mm Max. temperature110°C With jacketcheck Max. temperature100°C Number of trays11 Tray sizes1550x2000 mm Distance between the trays100 mm With 2 doorscheck Connection for the vacuum pumpcheck With vacuum pumpcheck Motor5,5kW, 400/690 Volt, 1455rpm MaterialStainless steel 1.4541 (321) Information TypeVTS D7 30m² Machine number5266/1-11 Year of construction2000 With switchgearcheck Floorspace3x2,6 m Total height2,6 m Weight6300 kg Extra SpecificationsOn top of the tray dryer, a heat ex ...
A hydraulic CNC plate shear Baykal is available. Cutting length: 3060mm, max. sheet thickness (St42): 10mm, operating pressure: 260bar, stroke rate: 12/min. Machine dimensions X/Y/Z: approx. 4000mm/2600mm/2000mm, weight: approx. 9600kg, control system: Delem DAC 310. Documentation available. On-site inspection is possible.
A semi-automatic horizontal bandsaw Knuth is available. Miter range: 0°-60°, min. cutting range: 25mm, max. cutting diameter: 325mm, max. cutting diameter X/Y: 400mm/315mm, saw band speed: 100m/min, saw band dimensions X/Y/Z: 4380mm/34mm/1.1mm. Machine dimensions X/Y/Z: approx. 2150mm/2150mm/1650mm, weight: approx. 1800kg. An on-site inspection is possible.
Complete line for washing/sterilizing/filling/sealing open funnel/spike ampoules, consisting of: Bosch RRU 3064 washing machine - Capacity max. 18,000 ampoules/h - Ultrasonic cleaning in heated water bath - Internal and external cleaning with hot pumped water/compressed air/fresh water/compressed air - Transfer of ampoules to sterilization tunnel - Shared control cabinet with HQS and ALK 5080 - PLC Siemens S5 Bosch HQS 3420 sterilization/depyrogenation tunnel - Capacity max. 18,000 ampoules/h - Drying, sterilization, and depyrogenization of ampoules at a hot air temperature of 150-350°C - Cooling of ampoules to max. 10-15°C above cooling air temperature - New tunnel conveyor belt in August 2021 Bosch ALK 5080 filling/sealing machine - Max. output 18,000 ampoules/hour - Pre- and post-gassing - Filling - Preheating - Sealing via skewer removal, sealing gassing ...
Aircooled chiller/Heat pump CARRIER 30RQ0522 0157 PEE 465 kW/560 kW Cooling capacity: 465 kW / 132.22 tons (12/7 — 35°C) Heating capacity: 560 kW / 159.23 tons (40/45 —7°C) Year of manufacture: 2011 Options: Heat pump. Hydraulic module. Refrigerant circuit: 2 pcs. Heat exchanger: Shell and tube Condenser: Copper / Aluminum Compressors: 8 pcs. Danfoss SH300A4ACB (scroll) Type of refrigerant: R410a Number of fans: 6 pcs. + 2 pcs. (Frequency inverter) Hydraulic module: 2 pcs. water pump WILO DL65/170(163)-11/2 Carrier, expansion vessel. Dimensions: 4.8x2.3x2.4 m. Weight: 5059 kg. Working hours: 448/457/454/119/835/772/771/760 h. Condition: Good
General SKU248T594 MakeMolteni LocationBarneveld TypeI 300 Main Features MaterialMild steel Volume250 Ltr. Motor7.5 KW Specified Features - Planetary mixer Planetary mixercheck Motorcheck 7.5 kW, 380 Volt (Ciem) With variable speed drivecheck Speed scraper1450-950 rpm With pancheck (2x) Capacity250 Ltr. Pan sizesdia. 700x680 mm MaterialStainless steel Information No.25-12 Year of construction1968 Floor space1,6x1 m Total height1,6 m Weight1500 kgPlanetary mixersMolteniMixers > Planetary mixersBrand > Molteni What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Haco ERM 320 ton x 6100 mm CNC Capacity: 320 ton x 6100 mm Backgauge: CNC Control: 2D Touch Passage between uprights: 5050 mm Max stroke: 250 mm Max distance between table -- ram: 500 mm Depth of throat: 330 mm Locking speed: 80 mm/sec Working speed: 8 mm/sec Returning speed: 100 mm/sec Electric motor (power): 22,5 kW Length: 6500 mm Depth: 1980 mm Height: 3700 mm Weight: 33 ton
cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
CNC lathe Okuma LB 3000 EX II Control: OSP-P300LA Year of manufacture: 2018 Turning length: 500 mm Turning diameter: 340 mm Swing diameter over bed: 530 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: BMT 65 Equipment: - Chip conveyors - Parts catcher - Touchsetter - Programmable sub-spindle - Bar feeder prepared - One Touch IGF - 3-Jaw Power Chuck Kitagawa
Dynajet 350 TH Heli – Used High-Pressure Cleaner Used Dynajet 350 TH Heli high-pressure cleaner in very good condition. Technical details: Year of manufacture: 2022 Operating pressure: 350 bar Flow rate: 16 l/min Operating hours: 331 hours Equipment: Including accessories The machine is well maintained and ready for immediate use. More information, photos, and price available on request.
General SKU336W851 MakeAlfa Laval LocationBarneveld CEcheck TypeM10-Mbase Pressure Working pressure10 Bar Main Features MaterialStainless steel Surface38 m2 Size length1960 mm Sizes width520 mm Specified Features - Plate heat exchanger Plate heat exchangerscheck Heating surface38 m2 Capacity87,0 l Number of platens200 Plate sizes400 x 900 mm Connectionsø 100 mm Max. temperature-3°C/120°C Information No.30110-06881 Year of construction2018 Mounted on legscheck Floorspace0,55 x 2,00 m Total height1,25 m Weight860 kgPlate heat exchangersAlfa LavalHeat exchangers > Plate heat exchangersBrand > Alfa Laval What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for ...
A complete beer keg cleaning and filling system Leifeld + Lemke, today IW-Anlagentechnik, is available. Throughput capacity: approx. 120kegs/h, keg/barrel formats: 20l/30l/50l, control system: Siemens S7, control system retrofit: 2008. 1) Keg exterior cleaning machine Schöttiger + Schäfer KHAH 240, max. cleaning capacity: 240kegs/h, operating cleaning capacity: 140kegs/h, drive rollers: 2, transfer rollers infeed/outfeed: 1/1. 2) Keg pre-cleaning machine Leifeld + Lemke KVR 300, year of manufacture: 1988, max. washing capacity: 180kegs/h, operating washing capacity: 120kegs/h, design: stainless steel, process: centering, residual emptying with air purging, mixed water pre-cleaning, waiting and soaking station, caustic cleaning and pre-filling. 3) Keg main cleaning and filling machine Leifeld + Lemke KFR 401, year of manufacture: 1988, filling line capacity: 60kegs/h, design: stainless ...
used
Socad 300 x 8 mm (fixed angle) Capacity : 300 x 8 mm Fixed angle -- variable angle: fixed Electric motor (power): 7,5 HP Length : 1200 mm Depht : 900 mm Height: 1500 mm
diameter: 315 mm bore: 95 mm tool adaptor: Din 55027 Gr. 8 revolutions per minute: max. 1500 U/min Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Year of manufacture 2005 Stitching, folding and cutting unit 304 QSM 3-side trim Shed display Marking device Delivery date: immediately Price on request. Worldwide delivery & installation.
CNC lathe Okuma LU 300 M 2SC1000 Control: OSP-P200L Year of Make: 2007 Turning length: 1,000 mm Turning diameter: 340 mm Swivel diameter over bed: 530 mm Swivel diameter over slide: 410 mm Spindle bore 72 mm Speed: 45 – 5,000 rpm 2 Tool Turrets A-turret: 12 tool positions (driven) B-turret: 8 tool positions Equipment: Tailstock Transformer Touchsetter Chip conveyor OneTouch IGF
Tenon cutting and slitting machine Hemag With automatic table feed Type: ZR 351 -Cross-cut saw motor power 2.2 kW Saw blade diameter 420 mm Cutting height maximum 120 mm -Slotted spindle motor power approx. 4 kW Spindle diameter 40 mm, spindle clamping length 180 mm Tool diameter maximum 350 mm Sliding carriage with automatic feed motor 1 kW max. tenon length 145 mm max. slot depth 145 mm max. wood thickness 200 mm max. wood width 400 mm Machine dimensions: L 2200 mm x W 2300 mm x H 1800 mm Weight: 1850 kg
Inv. Num. : 8905 Type: LF 3015 E Producer: G-WEIKE Created: 2022 Parameters: Operating hours: 900 h Laser power: 1.5 kW Work table length: 3000 mm Work table width: 1500 mm Maximum sheet metal cutting thickness (steel): 10 mm Source: CWFL-1500 Equipment: Cover (including glass)
General SKU328W699 MakeAlexanderwerk LocationBarneveld CEcheck TypePGS-300 Main Features MaterialStainless steel Motor3 KW Specified Features - Sieve granulator Granulating sievecheck Rotor sizes⌀ 300 x 170 mm Sieve sizes⌀ 300 x 190 mm Sieve perforation⌀ 2 mm x 1, ⌀ 8 mm x 1 Inlet210 mm Outlet470 mm Motor3 kW, 230/400 V, 1400 rpm (EX) Speed124 rpm MaterialStainless steel 1.4306 (304L) Information No.941-0021 Year of construction2008 Floor space1.2x0.62 m Total height0.7 m Weight220 kg ATEX compatiblecheck Extra SpecificationsPerforation of extra seives: ⌀ 2 mm x1 ⌀ 8 mm x1 Sieve granulatorsAlexanderwerkSieves > Sieve granulatorsBrand > Alexanderwerk What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Ba ...
Key data: 1000 , 400
Available complete power plant of Jenbacher 320 with 72000 hours. Engine is from year 1998. At 42000 hours it was performed an overall, after that the schedule of maintence has been followed. It stopped runninf at full load (1MW) without problems. All the auxiliaries are available except transformer and switch braker. Full boroscope and inspection of bearing beans, cranksaft and turbo is available. Brand: Jenbacher Model: J320 GS B05 Power: 1000kW Year: 1998 Hours: 72000 Voltage: 400V
sheet width: 3100 mm plate thickness: 6.0 mm thickness at Niro-steel: 4.0 mm distance between columns: 3120 mm down holder: 14 Stück cutting angle: 1°5 no. of strokes: 14 Hub/min control: ENC 100 table width: 500 mm work height max.: 880 mm oil volume: 170 ltr. total power requirement: 11.0 KW weight: 5550 kg range L-W-H: 3750 x 1950 x 1650 mm Machine was used for ALU processing no heavy sheet metal processing good condition (!) new price ~ 32.000 Euro ---------------------------------------------------- Swing cut guillotine shear with fixed cutting angle with DURMA ENC 100 NC control unit manual cutting gap adjustment from the front ---------------------------------------------------- Equipment: - electro-hydraulic guillotine shears swing cut - with DURMA ENC 100 NC control unit Backgauge preselection - X axis Number of pieces (in automatic mode) Control panel, front left Re ...
Features Volume 23330 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Technical Documentation Yes Number of feet 4 Total height 5200 mm Height 4250 mm Outer diameter 2750 mm Surface inside 2B=IIIC ground Surface marbled on the outside Agitator Propeller Insulation version 5 cm Description Topsoil: Flat bottom Central nozzle DN 50 with CIP ball central Downwards drawn ventilation pipe DN 50 Second filling pipe DN 50 with T-piece Airlock connection DN 50 Tank cylinder: Level indicator with strip and scale with threaded connection socket 20 mm Manhole 430x330 mm Ladder hooks 2x clear drain with flange and disc valve Insulation 5 cm Side agitator mixer with propeller, motor: 2.5 kW Level Measurement Sensor 5x Threaded Weld-on Sockets DN 20 Underbody: Inclined cone base 45° Forward-drawn residual drain pipe with flange connecti ...
2 pieces of Akebono strapping machine from 2010 and 2014, both in production ready condition. Available immediately with repro material- paper rolls.
Features Volume 15180 L Material V2A (AISI 304) 1.4301 Vertical design Last Use Food Number of feet 4 Total height 3750 mm Height 2250 mm Diameter width 2600 mm Weight 1050 kg Material 2B=IIIC ground Surface outside 2B=IIIC ground Description Topsoil: Clapper bottom Downward-swept vent pipe DN 40 with threaded connection DN 50 according to DIN 11851 Threaded weld-on nozzle DN 40 with T-piece and airlock connection DN 50, thread according to DIN 11851 Tank cylinder: Level indicator with bar, scale and standpipe valve DN 15 Manhole 430x320 mm Sample tap DN 15 Ladder hook at the top Downward-swept CIP cable DN 50 Clear drain with angled seat valve with flange with disc valve DN 50 Underbody: Clapper bottom Remaining drain with forward-drawn outlet surround with flange and angled seat valve DN 50 with sealing cap 4 calotte feet, height-adjustable, ...
An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, Opening stroke: 500mm, min. installation height: 250mm, Platen distance: 750mm, Tie bar spacing X/Y: 420mm/420mm, Platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, Ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, Weight: approx. 4300kg, Operating hours: approx. 80131h. The machine is defective and no longer functional or operational. Can only be used as a spare parts carrier. Documentation available. An on-site inspection is possible.
CNC lathe Okuma LB 3000 EX II-M C1000 Control: OSP-300L Year of Make: 2013 Turning length: 1,000 mm Turning diameter: 340 mm Swing diameter over bed: 580 mm Speed: 45 – 5,000 rpm Tool turret: 12 places (driven) Tool holder: VDI 40 Equipment: - Chip conveyors - Touchsetter - OneTouch IGF - NC tailstock - 3-Jaw Power Chuck Forkardt 3QLC/K250
maximum number of results exceeded
please refine your search
