oerlikon 3 used for sale

FOR SALE 3 CHILLER CARRIER YEAR 2 UNITS 2004 AND 2002 PRICE LOADED DEPARTURE FRANCE 7500€ FOR 3 UNITS

Control Heidenhain TNC 620 Travel X/Y/Z: 350 x 250 x 300 mm Spindle speed 12,000 min-1 Round and swivel table Tool magazine for 20 Wkz. ISO 30 Chip conveyor LANG Automation EcoCompact 10 Approx. 100 tool holders ISO 30

Key data: 1600 KW, 2000 kVA, 400 V

Caterpillar 3516 Diesel Generator Set – 2000 kVA | 1600 kW | 50 Hz | 1500 RPM Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516 Alternator: Caterpillar (SR4 series) Year of Manufacture: 2002 Generator Serial Number: 7TN01117 Rated Output: 2000 kVA Power Output: 1600 kW Power Factor: 0.8 Frequency: 50 Hz Voltage: 400 Volts Current: 2887 Amps Phase: 3 Phase Speed: 1500 RPM Excitation Voltage: 22 V Insulation Class: Class H Operating Conditions Duty: Suitable for Prime / Standby / Continuous applications Ambient Temperature Rating: 40°C Maximum Temperature Rise: 105°C (by resistance) Altitude Rating: Up to 1000 meters Condition: Fully operational and generating power This Caterpillar 3516 diesel generator set is a high-capacity, industrial-grade power solution designed for reliable prime and standby po ...

Key data: 2000 KW, 2500 kVA, 10500 V

2x caterpillar 3520-C Unused genset! 0-Hours gensets are located in our warehouse for inspection adres: Kranenpool 10 6443VA Brunssum Netherlands check our website for more generators! generalpowerholland.nl +31681163153 what's app number

Key data: 1460 KW, 1825 kVA, 400 V

Caterpillar Diesel Generator Set – CAT 3516 Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516 Alternator: Caterpillar SR4 Series Year of Manufacture: 2004 Control System: Non-Electronic Engine Serial Number: 1LZ00634 Alternator Serial Number: 4FN02876 Arrangement Number: 144-1932 Electrical Specifications Rated Output: 1825 kVA Power Output: 1460 kW Power Factor: 0.8 Frequency: 50 Hz Voltage: 400 Volts Current: 2634 Amps Phase: 3 Phase Speed: 1500 RPM Excitation Voltage: 21 V Excitation Current: 5.6 Amps Insulation Class: Class H Maximum Temperature Rise: 105°C (by resistance) Ambient Temperature Rating: 40°C Altitude Rating: Up to 1000 meters This Caterpillar 3516 diesel generator set is a high-capacity, industrial-grade power solution designed for reliable prime, standby, and co ...

Year: 2009 - technically efficient, ready to work – after full service - discs: 500 mm - working length: 3700 mm - PC control (Windows XP) - online access - vertical and horizontal pneumatic clamps - automatic disc guards - roller feeder - support for longer profiles

Key data: 1498 KW, 1872 kVA, 480 V

Caterpillar Diesel Generator Set – CAT 3516 TA Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516 TA Alternator: Caterpillar SR4 Series Year of Manufacture: 1996 Engine Serial Number: 25Z05435 Alternator Serial Number: 4FN00778 Arrangement Number: 107-7350 Electrical Specifications Rated Output: 1872 kVA Power Output: 1498 kW Power Factor: 0.8 Frequency: 60 Hz Voltage: 480 Volts Current: 2780 Amps Phase: 3 Phase Speed: 1800 RPM Excitation Voltage: 22.3 V Excitation Current: 5.84 Amps Insulation Class: Class F Maximum Temperature Rise: 105°C (by resistance) This Caterpillar 3516 TA diesel generator set is a robust, industrial-grade power solution designed for demanding power generation applications. Manufactured in 1996, the unit delivers 1872 kVA (approximately 1500 kW) at 60 Hz, making it suitable  ...

Caterpillar 3516 Diesel Generator Set – CAT 3516-DITA Manufacturer: Caterpillar Generator Set Type: Diesel Generator Set Engine Model: CAT 3516-DITA Alternator: Caterpillar SR4B Year of Manufacture: 1995 Engine Serial Number: 25Z04872 Arrangement Number: 107-7350 Frequency: 50 Hz Phase: 3 Phase Speed: 1500 RPM Duty: Suitable for Prime / Standby / Continuous applications Condition: Used – fully serviceable and suitable for immediate deployment This Caterpillar 3516-DITA diesel generator set is a robust, industrial-grade power solution built around Caterpillar’s proven V16 engine platform. Manufactured in 1995, the unit features a non-electronic mechanical control system, making it especially attractive for applications where reliability, simplicity, and ease of maintenance are critical. Coupled with a Caterpillar SR4B alternator, this ge ...

Model: wölfer 250bkw MDRKF 315X-4 SFB160FUT Serial No.: 192558 Type: 3-phase AC Motor Year: 2014 Voltage: 0-690 V / 690 Y Power: 250 kW Frequency: 50 / 100 Hz Speed: 0-1492 / 2983 rpm Current: 240 / 233 A Power factor (cos φ): 0.91 / 0.94 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B3 (foot-mounted) Ambient temperature: – 25 °C to + 45 °C Brake: SFB160FU – 110 V DC Encoder: POG 10 N / 1024 ppr / T1000 Heater: 230 V – 200 W Weight: 1650 kg Standard: EN 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Model: wölfer 175 kw MDRKF 315L-4 SFB160FUT Serial No.: 192557 Type: 3-phase AC Motor Year: 2014 Voltage: 690 V / 690 Y Power: 175 kW / 175 kW Frequency: 50 / 100 Hz Current: 170 / 145 A Speed: 1486 / 2973 rpm Power factor (cos φ): 0.92 / 0.95 Duty type: S3 – 100 % Protection class: IP 56 Insulation class: F Mounting: IM B5 (flange-mounted) Ambient temperature: – 25 °C to + 45 °C Blower: 380 V 50 Hz / 440 V 60 Hz Brake: SFB160FU – 110 V DC Encoder: POG 10 N 1024 ppr / T1000 Heater: 230 V – 200 W Standard: EN 60034 Weight: 1380 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Manufacturer: ABB 560 kw Motors — Vaasa, Finland Model: M3BP 315S K4 A V3 Serial No.: TE262741-1 Production Code: 308P315S0-BUQWH-3641B CE Compliant Voltage 690 V Current 575 A Frequency 50 Hz Speed 1491 rpm Power Output 560 kW Power Factor (cos φ) 0.86 Efficiency (η) 94.1 % Duty Type S1 (continuous) Insulation Class F Enclosure Protection IP55 Mounting Type V3 (vertical mounting, flange) Bearing Type 6322/C3 (DE) & 6316/C3 (NDE) Regreasing Interval Depends on load: 4,200–10,500 hours Weight ≈ 2600 kg (typical for this model) Manufacturing Standard IEC 60034 Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.

Manufacturer: ABB 560 kw Motors — Vaasa, Finland Model: M3BP 315S K4 A V3 Serial No.: TE262741-1 Production Code: 308P315S0-BUQWH-3641B CE Compliant Voltage 690 V Current 575A Frequency 50 Hz Speed 1491 rpm Power Output 560 kW Power Factor (cos φ) 0.86 Efficiency (η) 94.1 % Duty Type S1 (continuous) Insulation Class F Enclosure Protection IP55 Mounting Type V3 (vertical mounting, flange) Bearing Type 6322/C3 (DE) & 6316/C3 (NDE) Regreasing Interval Depends on load: 4,200–10,500 hours Weight ≈ 2600 kg Brand-new, never-used electric motor. Suitable for standard applications as well as port operations.  

10 station grading line Mettler Toledo advanced check weigher Weight range 50g to 8000g Weigh table size - 300mm wide x 630mm long Automated box handling system Complete with loaders Critical spares Overall dimensions 8500mm long x 1400mm wide

Some older plastic injection molding machines from Arburg, Demag and Stübbe are available. 1) Stübbe S110/345, year of manufacture: 1976, clamping force: 1000kN, shot weight: 140g, mold installation height min./max.: 180mm/480mm, opening stroke: 320mm, tie bar spacing: 360mm/355mm, screw diameter: 40mm, core pulls: 1. 2) Demag D 150-452 NC III, year of manufacture: 1990, clamping force: 1500kN, shot weight: 207g, mold installation height min./max.: 320mm/550mm, opening stroke: 430mm, tie bar spacing: 460mm/460mm, screw diameter: 45mm, core pulls: 1. 3) Demag D 100-275 NC II P, year of manufacture: 1989, clamping force: 1000kN, shot weight: 130g, mold installation height min./max.: 200mm/400mm, opening stroke: 350mm, tie bar spacing: 400mm/400mm, screw diameter: 38mm, core pulls: 1. 4) Arburg Allrounder 270M 250-75, year of manufacture: 1990, clamping force: 250kN, shot weight: 25g, mol ...

Cooling/freezing chamber Viessmann -External dimensions: 3300 x 2100 x 2450 mm -Internal dimensions: 3100 x 1900 x 2250 mm -Plate thickness: 100 mm -Door clearance: 800 mm -Stainless steel floor -Cooling/Freezing unit in set -Stock quantity: 1 -The chamber is easy to assemble

sheet width: 3100 mm plate thickness: 6.0 mm ST pre-bending: 4.0 mm ST diameter of upper rolls: 200 mm side roll diameter: 165 mm diameter of lower rolls: 190 mm bending speed: ca. 5.0 m/min Control: DIGI oil volume: 80.0 Liter voltage: 380 V total power requirement: 6.0 kW weight: 6000 kg range L-W-H: 5250 x 1500 x 1400 mm very good condition () Current new price approx. 80,000 euros Special price on request Features: - Robust electro-hydraulic 4-roll bending machine 4-roll concept offers a wide range of bending and rounding options - MG swivel control panel Operation - control of all rolls and machine axes Digital position display Manual operation via joysticks - Two central rolls are driven directly by hydraulic motors - Conical rolling possible via inclined position of the rolls - Parallelism of the side rollers via torsion shafts - Bending on both sides - Diameters of up to 1 ...

Cooling/freezing chamber -External dimensions: 3135 x 1385 x 2260 mm -Internal dimensions: 2970 x 1225 x 2100 mm -Plate thickness: 80 mm -Door clearance: 750 mm -Cooling/Freezing unit in set -Quantity in stock: 1 -The chamber is easy to assemble

table length: 3048 mm table width: 1524 mm burner heads: 1 stroke: 270 mm speed: 100 m/min dimensions: 8900 x 2260 x 2220 mm weight of the machine ca.: 7.500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

CONTROLS   PLC SIEMENS S5 95U PRESS DESIGN   drive system: hydraulic   openings in uprights: yes PRESS FORCES   total force (nominal): 350 to PRESS TABLE   table surface (left-right): 1600 mm   table surface (front-back): 1400 mm SLIDE   stroke: 1200 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 250 mm/s   working velocity min.: 14 mm/s   working velocity max.: 50 mm/s TOOL ASSEMBLY DIMENSIONS   distance table - slide max.: 1250 mm   distance between columns (H-frame): 1650 mm   passline opening (free passage in side columns): 630 mm ELECTRICAL SPECIFICATIONS   total power consumption: 60 kW DIMENSIONS / WEIGHTS   height above floor level: 4300 mm   height under floor level: 1000 mm   total weight approx.: 24000 kg ATTACHMENTS (PRESSES)   European CE standards: yes

A horizontal ball mill from the Ruitong Group is available. Volume: 30l, material: steel, motor power: 22kW, electrics: Delixi, max. operating temperature: 45°C, shaft speed: 780rpm, dispersion discs: 11, throughput range: 50kg-600kg/h, max. product viscosity: 100Pas. Machine dimensions X/Y/Z: approx. 2000mm/950mm/1600mm, weight: approx. 950kg. Documentation available. On-site inspection is possible. The mill is located in China

Engine Brand: CATERPILLAR, Condition: USED, Engine Cooling Type: External Exchanger (eg. Keel Cooled) , Engine Color: Yellow , Working Hours: 3000 Hour(s), Engine Condition: Used , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 110 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/generators/caterpillar-3306-84z-generator -137kva-used/376, , = More information =, , Year of construction: 1010, Empty weight: 1.400 kg, Type number: 3306 84Z GENERARTOR 137KVA

Lindner Jupiter 3200 low-speed single-shaft pre-shredder incl. hydraulic unit and control cabinet Mileage: 54,000 BH Year of Make: 2008 Machine was regularly serviced and repaired Application: Fragmentation of commercial and. industrial waste,

Complete Krones aseptic PET filling line for still and carbonated products / 25,000l/h Bottle sizes :0.33l, 0.5l, 0.75l, 1l, 1.25l, 1.5l Capacity : 25.000l/h Products : Co² and still beverages Closure type : 28mm PCO 1810 Labeling : OPP Labels (Hot Melt) Filling process : Wet aseptic Number of employees to run the line : 4-5 employees Condition : As good as new This complete Krones aseptic line, manufactured in 2016, is specially designed for the safe and hygienic filling of beverages into PET bottles. It offers a fully aseptic process that ensures maximum product safety and extended shelf life. The line is suitable for both still and carbonated soft drinks with a capacity of 25,000 liters per hour. It supports closures with a size of 28 mm (PCO1810) and allows the use of sleeve labels. The combination of state-of-the-art technology and precise control makes t ...

Vakumix continuous homogenizer in the design and mobile on castors. For connection to existing containers Connection suction side: DN 100 Connection pressure side: DN 80 kW: 30 Suction device DN25 front side for sucking in liquids. NEW: Control, converter, all seals incl. mechanical seal. The continuous homogenizer is PLC controlled. Delivery time approx. 4 weeks.

Aircooled chiller/Heat pump LENNOX GAH370DP2M 366 kW/349.9 kW Cooling capacity: 366 kW / 104.07 tons (12/7 — 35°C) Heating capacity: 349.9 kW / 99.49 tons (40/45 —7°C) Year of manufacture: 2023 Options: Heat pump. Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Copper / Aluminum Compressors: 6 pcs. Danfoss DSF270A4AAA (scroll) Type of refrigerant: R32 Number of fans: 8 pcs. (EC-fans) Dimensions: 5.3x2.26x2.41 m. Weight: 3203 kg. Working hours: 63/60/76/92/95/92 h. Condition: Outlet

Under-table cross-cut saw Emmegi type Calvet 300 M Technical data: with automatic stop Fence pushes the material to the cutting position after entering dimensions Saw blade: coming from below Saw blade diameter max. (mm): 300 Right long table: with automatically movable stop Table length (mm): 3200 Table width (mm): 120 Roller conveyor left: roller conveyor length - 3550 mm, roller conveyor width - 310 mm Roll width (mm): 240 Roller conveyor and stop table: not separable Machine weight (kg): 80 without pictured suction

Manufacturer: Rehm Model: VXP+ nitro 3500 Year of Manufacture: 2014 Type of Machine: Reflow Oven Electrical Specifications Voltage: 3 × 230 / 400 V Frequency: 50 Hz Power Rating: 79 kW Current: 115 A Cooling & Gas Cooling: 20 l/min, minimum 2 bar Nitrogen Consumption: approx. 21 m³/h Exhaust Air: 400 m³/h Operating Pressure: 6 bar Dimensions & Weight Length: 6.4 m Width: 1.60 m Height: 1.80 m Weight: approx. 2 t Features & Equipment - SMEMA connection - Double track - Automatic width adjustment - Fast cooling unit - Program manager Find more here - / Contact us at -

pillar-mounted slewing crane:: mobil arm length: ca. 2500 mm weight of the machine ca.: 4 t weight max. in kg: 125 kg bucket net weight: 430 kg bucket filling weight: mindestens 416 kg bucket - total weight: mindestens 846 kg max. wheel load: 391 kg max. support load: 544 kg : . The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

It is a used Funk flake ice machine C 300 for sale. The machine is checked and fully functional. The machine is in very good condition. Daily output up to 300kg flake ice. Price on request.

Used Centrifuge Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Total weight: 4300 kg Stated price of 10,500 € in unrepaired condition, 24,500 € net in overhauled condition

travel -x axis: 900 mm travel -y axis: 200 mm travel -z axis: 800 mm B-axis swival range +/-: +90 / -20 ° positioning accuracy: C: 9 control: SIEMENS number of spindle speeds: 0 - 6.000 CNC turning and milling center vertical | PITTLER - PV 315 The machine is in very good condition. Technical data of the machine will follow soon. We ask for your understanding ! - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: PV315 | PV-315 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Cylindrical grinder STANKO 3A164/2000

Used rotor unit without frame and motors (spare rotor) Speed: 3500 rpm Drum inner diameter: 448 mm Drum wall thickness: 11 mm Material: Steel permissible. Density: 1.50kg/dm³ Stated price of 8000,-€ in unrepaired condition, 15.500,-€ net in overhauled condition ---------------------------------------------------------------------- ----------------------------------- used rotor unit without frame and motors (spare rotating) Rotating speed: 3500 rpm Bowl inner diameter: 448 mm Bowl wall thickness: 11 mm Material: Steel Max. density: 1.50 kg / dm³ stated price of 8000,-€ in unrepaired condition, 15500,-€ in repaired condition

The system consists of a KHS INNOPAL RK6-350 palletizer from 2004, a KUKA KR 360/1 industrial robot and a Siemens Simatic S7 automation controller. The system is suitable for the automatic palletizing of cartons, bottles or PET-packaged products.

Stock# U2376-4 Used stainless steel twin shaft paddle mixer by Alco Food Machines (DE) model AMP 300-S with total volume of mixing chamber 330 l. Working volume of mixing chamber about 230 l. Mixing chamber has internal dimensions L 900 mm x W 805 mm x D 535 mm. Top open. Machine is equipped with two mixing shafts, each driven via gearbox and el motor 0.9/1.5 kW, 705/1415 rpm, 380/400V, 50 hz. Each shaft is equipped with two half-ribbons and seven mixing paddles. Discharge through front wall two discharge outlets, each equipped with stainless steel lid, operated pneumatically. Machine is mounted on four stainless steel legs and is equipped with local control panel. Last time used in food industry.

Falch Trail Jet 15 As good as new 300bar 24l/min Hot water 228 Hours 6 months warranty Price plus VAT CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more. Available throughout Europe Headquarters Austria AT Depot 1 Euskirchen DE Depot 2 Rotterdam NL

Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg

frequency: 500 kHz Power: 50 KW control: Siemens S7-200 Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

FOR SALE GAS TURBINE Tempest SGT300 packaged 7941 kva year 2000 50 HZ VOLT 11 000

rated frequency: 120 MHz Power: 60 kW voltage: 14 kV current: 12 A Hardening Unit - Induction | SAET - 3RALA equipped with a FANUC Robot M-6i B The machine is in very good condition. Please refer to further technical details in the attachement of the offer. - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - #Tags: 3 RALA |3-RALA The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 t

Inv. Num. : 8878 Type: Sanshs Automa 30T Producer: CHIESA Created: 2017 Parameters: Operating hours: 100 h Compressive force: 30 t Working area: 2000 x 500 mm Ram size: 500 x 500 mm Machine weight: 3000 kg

For aluminium and PVC profiles Max. cutter diameter: 180 x 30 mm Max. profile height: 95 mm Stroke: 325 mm Pneumatic material tensioners Manual feed Minimum quantity spraying Weight: approx. 150 kg

The machine is in good technical condition, testing possible after prior agreement. Haidenhain 530 system.

Bar length range: 500mm-3200mm, conversion kit: D50/1650/3200, max. bar diameter: 50mm, material guide: 30mm, max. feed force: 750N, max. gripping force: 1500N, insertion speed: 700mm/s, return speed: 1000mm/s, loading capacity: 240mm. Machine dimensions X/Y: approx. 4450mm/900mm, weight: approx. 1800kg. An on-site inspection is possible.

Pleiger hydraulic motor for Krauss Maffei MOS 3000-05-204 Krauss Maffei No. 6249672

- Forming rolls R30/40/50/60/70/80/90/100 - Under power good running order - Documentation drawings availebel -  

2 pieces of diesel generators in parallel operation Engine Type: Caterpillar 3512HD Power each: 1875 kVA Total power: 3750 kVA Year: 2008 Operating hours: approx. 220 Cooling: Water Speed: 1500 1/min Voltage: 400/231 V, 50 Hz Tank: 2000 liters Generator: Caterpillar SR4B Type: Container Both power generators only ran in parallel in emergency power or trial operation.

Offer 24204 Technical data: - Largest turning diameter over bed 420 mm - Center width 1000 mm - Spindle bore mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 200 mm - Spindle speeds 40 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V - with: - 3 jaw chucks - SWS steel holder with 3 inserts - Space requirement approx. W 2800 x H 1250 x D 950 mm - Weight approx. 2200 kg

Key data: 3425 KW, 11000 V

ZERO HOUR CATERPILLAR 3616 3.4MW GENERATING SET Model: CATERPILLAR 3616 Hrs: 0 Fuel: Natural gas HZ: 50 Scope of supply: Engine, alternator, baseframe, Control Panel. Available for sale from Gas Engine Exchange . Please check our complete range of equipment at gasengineexchange.com.

Manufacturer: Trockenkammer Lauber /Mühlböck Model: OLSF-2x1,20-3x1,20-13,00 Year of Manufacture: 2004 Type of Machine : Wood Drying System TECHNICAL DATA PER UNIT HOT WATER HEATING - Heating capacity: 283,800 kcal/h = 330 kW - Flow temperature: 95 °C - Water volume: 11 m³/h - Pressure loss: 3 mWS = 0.3 bar - Connections (supply/return): DN 50 / DN 50, PN10 SPRAY SYSTEM - Water consumption: 68 l/h - Temperature: T = +4 °C - Pressure: p = 3.0 bar - Connection: R 1/2" - Spray nozzles: 5 pcs FANS - Quantity: 10 pcs - Power per fan: 1.1 kW - Voltage: 400 V STACKING DIMENSIONS - Length (L): 2 × 6.0 m + 1.00 m - Width (W): 2 × 1.2 m + 1 × 0.2 m - Height (H): 3 × 1.2 m + 3 × 0.1 m GROSS STACKING VOLUME - 103.7 m³ TECHNICAL DATA PER CHAMBER HOT WATER HEATING - Heating capacity: 410 kW - Flow temperature: 95.0 °C - Water flow rate: 24 m³/h - Pressure loss: 3.0 mWS =  ...