oce digital used for sale

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 900 mm turning diameter over slide: 460 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3.300 kg. dimensions: 4.630 x 1.200 x 1.529 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-jaw steel chuck PO3-315 mm / D8 - Clamping disk 450 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick- ...

turning length: 1000 mm turning diameter: 400 mm turning dia. in gap: 560 mm spindle bore: 52,0 mm turning speeds: 45 - 2.000 U/min bed width: 210 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 100 mm total power requirement: 2,0 / 2,4 kW weight of the machine ca.: 810 kg. range L-W-H: 1.890x800x1.600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 90 mm - Follow-on steady rest - passage diameter max. 70 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake f ...

turning length: 1000 mm turning diameter: 380 mm turning dia. in gap: 490 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 120 mm total power requirement: 1,5 / 2,2 kW weight of the machine ca.: 575 kg. range L-W-H: 1920 x 800 x 1660 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disc 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake  ...

turning length: 3000 mm turning diameter: 800 mm turning dia. in gap: 1000 mm turning diameter over slide: 540 mm turning speeds: 25 - 1600 U/min quill:: 5 MK quill travel: 235 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3820 kg. dimensions: 4800 x 1320 x 1580 mm Scope of delivery - 3-axis digital display ES-12 V with LCD display - Cable routing via energy chain - 3-jaw chuck PS3-315 mm / D8 - Clamping disc 500 mm - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 100 mm - 2 centering points - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Rapid traverse lengthwise and facewise - Slip clutch - Coolant system - Quick-change tool holder with 4 inserts - Protective device for qu ...

turning length: 1000 mm turning diameter: 360 mm turning dia. in gap: 480 mm spindle bore: 51,0 mm turning speeds: 70 - 2000 U/min bed width: 185 mm spindle taper: 55029 D 1-5 taper in tailstock: 4 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 540 kg. range L-W-H: 1920 x 750 x 1600 mm Equipment: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-200 mm / D5 - Faceplate 200 mm / D5, according to DIN 55029 - Fixed steady rest - passage diameter max. 70 mm - Follow-on steady rest - passage diameter max. 50 mm - Coolant system - Initial filling with Shell Tellus 46 - Extendable chip tray - Clamping disk 320 mm - Quadruple tool holder - Protective device for quadruple tool holder - Slip clutch - Micrometer longitudinal stop - Thread gauge - LED machine light - Reducing sleeve - Change gears - 2 centering points - Foot pedal with brake functi ...

Capacity plate width up to 3000 mm thickness 22 mm plate prebend 18 mm dual prepinch technical data: -length of rolls 3100 mm -top roll dia. 350mm -lower roll dia. 330mm -Hydraulic power unit with 20Hp motor -Electric supply Vac 400/50 – 480/60 Configuration complete: -Hardened surface of the 4 rolls -Conical plate bend hydraulic attachment. -hydraulic power driven rolls rotation with gear unit axial each -Synchronized hydraulic power dragging . -front open drop-end to remove closed shells. -Calibration re-rolling feature for welded shells Safety configuration in compliance. Control console electric commands with digital readout Predisposed ready to connect nr. 1 central hydraulic support for large dia. nr. 1 side arm hydraulic to hold in place think plate sheet being formed

Mitutoyo 570-313 Digital Height ruler

Brown & Sharp Tesa Hite 350 Digital Height Gauge 007.30041

Exhibition machine! Standard equipment: SDS2-3L Sino 3-axis digital display. Base frame, halogen lamp, jaw American 160 mm, 4-jaw American 160 mm, face plate 250mm, 2 steady restsTechnical data:Tip height 160 mm, center width 900 mm, max. turning diameter 460 mm, spindle bore 38 mm, spindle cone MK5, spindle speed 65 to 1810 rpm, speeds 18, main motor output power 2 Kw S6 ( 1.5 Kw S1), weight 510 kgSymbol photoPrices subject to change, errors, printing and typesetting errors excepted

This 3-axis Bridgeport VMC600 22 digital was manufactured in 2000. Its a vertical machining center equipped with the Heidenhain T.N C 426 control system, ensuring precise and efficient milling operations. Ideal for a variety of milling applications, this machine represents a valuable addition to any workshop. If you are looking to get high-quality milling capabilities, consider the Bridgeport VMC600 22 digital machine we have for sale. Contact us for further details regarding this machine.

We offer this used Weber Ultrasonics Saphir Digital Manual Station Ultrasonic Welding Machine, built in 2023. About 92500 units were produced with this machine. Sonotrode TR35Ti Frequency: 35kHz Power: 1000W 230V AC Displacement measuring system: 26.88 mm Minimum force: 34 N Maximum force: 500 N Low Level: 0 N Low Offset: 0 N If you have any questions or need more information, please feel free to send us a message or give us a call.

The weber ultrasonic saphir digital is used for automated inline ultrasonic welding. This device is sold without the automation line. Frequency 35kHz, Power 1000W, 230V AC, Sonotrode TR35Ti The machine was used for the production of about 90000 units.

The weber ultrasonic saphir digital station is used for ultrasonic welding. The system is sold with a machine table and workpiece holder as shown in the pictures. Frequency 35kHz, Power 1000W, 230V AC (Schuko plug), Sonotrode TR35Ti, Min force 30N, Max force 380N The touch panel has a small defect, but the use is not affected.

piXelmed Simply Digital Small Animal X-ray System X-ray System for Veterinarians Veterinarians, Used Year of construction 2021 Seal of approval StrlSchV 12/2026 Condition: very good The PIXELMED SIMPLY DIGITAL X-ray system is a space-saving, fully digital complete system specially designed for use in small veterinary practices. The integrated high-resolution DR detector in 43 × 43 cm format ensures consistently high image quality for all images. The system is controlled via an integrated software solution, which coordinates the X-ray tube and detector and significantly simplifies the entire imaging process and enables reproducible results. Due to its compact design, the system is also suitable for use in confined spaces. It is operated via a standard 230-volt socket, so that no complex installation measures are required. The patient positioning table is equipped with a  ...

Digital Height Gauge Travel: 600 mm Column diameter: Ø 45 mm Granit base dimensions (L x W x H): 200 x 140 x 60 mm In working condition

Die cutter, punching machine, punching device, hole punching machine, hole punch, copy punch, stop punch, hole punch, eccentric punch, row hole punch, punching machine, punch press -Manufacturer: Mubea, punch type KL 100 with 2-axis digital display -Pressure capacity: 100 tons -Punching performance: see photo nameplate -Projection: 535 mm -Material table: 1240 x 615 mm -Travel: x= 1100 mm / y= 600 mm -Digital display: Heidenhain 2-axis digital display -Accessories: incl. see photos -Total dimensions: 2200/2020/H2110 mm -Weight: 3145 kg

Ultrasonic sensor, ultrasonic sensor, ultrasonic generator, ultrasonic generator -Manufacturer: Herrmann, Ultrasound generator -Type: Ultrabond digital 16.16 -Power: 1600 W -Voltage: 230 V -Number: 6x generator available -Price: per piece -Dimensions: 320/160/H260 mm -Weight: 9.6 kg/pc.

Eurotherm Antrieb Digitalregler 3G-KOMPAKT 637/K D6R 10-7

- With digital display - Two speed ranges for universal use from 60 - 2000 rpm - Push-through agitator shafts (only when stationary) - For stirring quantities of up to 20 I (H20) - currency: MYR PIC: - Dr Wong Sze Ting (013-939 6151/ wongsttopglove.com.my) - Ms. Fatimah (013-628 7197/ fatimah_asmadtopglove.com.my) - Ms. Farha (011 1193 6236/ nurfarha_atopglove.com.my)

T65 Digital Ultra Turrax Currency: MYR PIC: - Ms. Fatimah (013 628 7197/ fatimah_asmadtopglove.com.my) - Ms, Farha ( 01111936236/ nurfarha_atopglove.com.my

Heidenhain VRZ 760 B 252 907 01 Digital Read out 3 axes

Counter: 71 Mil. clicks Equipment / additional information: HP IndiChrome Plus 7-color on-press printing White ink kit Enables use of white ink Technical specifications Printing speed 120 four-colour a4 images per minute (two-up); 240 two-colour or monochrome a4 images per minute (two-up) Image resolution 812 and 1219 dpi at 8 bit, addressability: 2438 x 2438 dpi HdI (High definition Imaging) Paper format 330 x 482 mm maximum Image format 317 x 464 mm Paper weight Coated: 80-350 gsm; Uncoated: 60-320 gsm; thickness 70-400 microns Press dimensions Width: 5443 mm; depth: 2298 mm; Height: 2104 mm

2-axis counter digital display VRZ 730 The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Philips Diagnost TH/VS (DIGITAL) with the following system components: - Generator CXA - Tube SRO 33100 0.6/1.2 - Vertical tripod Diagnost VS - 2x Trixell a-Si flat panel detector Pixium 4600 B (35x43 cm) - Workstation • Before taking over, all devices or systems have been tested on site for their functionality. • The system is located in our warehouse in Freiberg, Germany. It is packed on pallets, professionally lashed and wrapped in stretch film and can be picked up immediately • You buy the system in "IST" condition from the warehouse Freiberg (EXW), Saxony, Germany, and prepayment. • The sale is made as "Used", EXW Freiberg, Saxony, Germany, to resellers or dealers despite being fully functional without warranty. • To recommission the device, you will most likely need a license from the device manufacturer. • The installation, commissioning and configuratio ...

turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm Scope of delivery - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 630 mm - Fixed steady rest - passage diameter max. 250 mm - Follow-on steady rest - passage diameter max. 110 mm - 1 centering point / 1 follow-on punch point - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective de ...

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

pressure: 100 kN stroke: 0-200 mm table-size: 450 x 1000 mm working speed:: 6-10 mm/ sec. return speed: 20 mm/sec work height max.: 900 mm toolpiece height max.: 200 mm total power requirement: 1,5 kW bending capacity max. - round: 42x3,2 mm : 150x10 mm weight: 320 kg dimensions: 1010x480x1120 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 30 mm, 700 mm

Radial drilling machine Manufacturer Danube Type DF130 / Danuflex 130 Digital Year of construction 2003 Spindle speed 40 - 3600rpm Feed rate 0.05 - 0.55 mm/rev Column diameter 170mm Quill stroke 170mm Table size 630 x 1200mm Table load 1000kg with 3D button Heidenhain Instruction manual available.

x-travel: 300 mm y-travel: 160 mm z-travel: 340 mm digital readout: 3 Achsen HEIDENHAIN spindle taper ISO: 40 spindle turning speed range: 40 - 2000 U/min quill stroke: 60 mm feeds -stepless-: 5 - 500 mm/min table-size: 600 x 210 mm rapid traverse: 1200 mm/min power capacity: 1,6 - 2,0 kW table load: 200 kg voltage: 400 V weight of the machine ca.: 800 kg dimensions of the machine ca.: 1,15 x 1,15 x 1,65 m electric cabinet: 0,60 x 0,35 x 0,90 m ! ATTENTION ! EXCELLENT CONDITION ! This machine comes from a vocational school! - Serialä-No.: 2102-2445 - 3-axis active digital display HEIDENHAIN TNC 116 - Rapid traverse - Machine light The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

The machine was put into operation. A possible malfunction was detected. It is therefore suspected that the machine is defective. A further technical inspection was not carried out. Auction-ID: A1-49964-37

The machine was put into operation. A possible malfunction was detected. It is therefore suspected that the machine is defective. A further technical inspection was not carried out. Auction-ID: A1-49964-33

Used Ocea labeller machine - year 2003Technical Specifications & Performance DataThis Ocea Zaffiro Line S4 E2 Labeling Machine delivers reliable performance for medium-speed industrial packaging and beverage production environments. Built in 2003, it is a second hand labeling solution engineered for consistent application quality and efficient format handling. The machine is suitable for integration in a used bottling line or as a standalone labeler within broader industrial packaging operations.Manufacturer: Ocea (ACMA engineering)Model: Zaffiro Line S4 E2Year: 2003Production speed: up to 85 bpm (approx. 5,100 bph)Performance by format: 0.65L trigger bottles: 40–75 bpm; 0.5L bottles: 70–85 bpmBottle formats: Compatible with 0.5L and 0.65L bottlesContainers: Designed for PET bottle handling; potential glass compatibility depends on tooling and formatElectrical supply: 380 VAC, 3+N, 5 ...

SARTORIUS LP6200S-OCE Precision Balance Designed for high-capacity, high-accuracy weighings, offering a capacity of 6200g with a readability of 0.01g. Ideal for ISO and GLP compliant environments, it features automatic self-calibration, fast response times, and reliable performance in common applications, ensuring accurate and consistent results. Auction-ID: A1-49883-306

SARTORIUS MSE225P-100- DU Semi-Microbalance Analytical Balance + YDP10-OCE Printer THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-251

SARTORIUS - MSE125P-000-DU + YDP10-OCE THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-250

A simple and affordable platform, the QuantStudio 3D Digital PCR System produces absolute quantitation data with the accuracy and sensitivity you need. Auction-ID: A1-49883-98

VISION Engineering EVO Cam EVO CAM II High Definition Digital Microscope THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-49883-271

Digital slide scanner that converts glass slides into high-resolution digital data through high-speed scanning Auction-ID: A1-49883-94

<br><br><br>Still in operation: Yes<br>Verf Gbar: Immediately

<br><br><br>Still in operation: Yes<br>Available: immediately

We sell a large batch of used Konica Minolta and OKI copiers and printers. All equipment comes from lease return or insolvency. The equipment was included in the maintenance contract during the lease. The devices are functional and on all devices there is a test printout with all meter information. Mixed lot: 3x Konica Minolta Bizhub C3100p, 12x Oki ES 4132, 3x Oki ES 5112, 2x Oki ES 7131, 3x Oki ES 4192MFP, 6x Oki ES 5462MFP, 4x Oki ES 5431, 7x Oki ES 8473MFP. We are happy to send meter readings and photos. The sale takes place from our warehouse in Dachau near Munich. Prices are EXW. Please understand that we only sell the entire lot or mixed packages of at least 10x pieces. Invoicing with VAT statement.

Height gauge HEIDENHAIN measuring instrument Measuring length: 620 mm, type LS 803 Digital device, type VRZ 381 Condition: used Data cable, power cord All information without guarantee

Type Overture ES Voltage 230 V (50 Hz) Made in USA Transport dimensions 600x400x500 mm Weight 15 kg

TO WHOM IT MAY CONCERN; WE VE 6 PCS USED WOODWARD 721 DIGITAL SPEED CONTROL AT OUR STOCK. WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL ON BELOW PART NO 8280 - 303 PART NO 9987 - 206 CTRL ASSY 8237 - 951 REV. E CTRL ASSY 8237 - 735 REV. G ALL PANES LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU'VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Manufacturer:Fujifilm Model: Acuity LED 1600 Year of Manufacture: 2017 Find more here - .ucymachines/ Contact us at - sales@ucymachines

TO WHOM IT MAY CONCERN; WE VE 1 PCS NEW & UNUSED WOODWARD 723 PLUS DIGITAL SPEED CONTROL AT OUR STOCK. WE VE ALSO 9 PCS USED 723 PLUS AT OUR STOCK . WE DISMANTLED THOSE CARDS FROM RUNNING SYSTEM. PLS FIND DETAIL NEW PART NO 8280 -488 REV D CTRL ASSY 9906-619. REV G USED PART NO 8280 - 5010 PAAE034117 REVISION NEW 2PCS ( WARTSILA W9L 20 ) PART NO 9906 - 619 REVISION NEW 6PCS PART NO 8280 - 336 1PCS ALL PANELS LOCATED IZMIR TURKEY . READY TO SHIPMENT. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba Best Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Digital I/O Module, DSQC 653, 3HAC025918-001/00, ABB, new Please note: This is an original product and not a replica from... Special price If you have a VAT number, we will be happy to issue you with an invoice without VAT. New! - never been used and is completely new, - comes from a spare parts warehouse of a certified production facility, - is in its original packaging, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law applies without exception and court location St. Pölten.

Available in stock 3 x Used Capstone Digital Power Controller (DPC Board). 1 unit is complete and the other 2 are missing the control board. The units are used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.