o h used for sale

Directional Control Valve ORSTA 25-01.1 25-23 .1 25-38.1 TGL 20705 Pn 10 bar Dimensions: 330 x 130 x 150 mm

Directional Control Valve ORSTA 16-01.1 16-23 .1 TGL 20705 Pn 10 bar Dimensions: 230 x 80 x 75 mm

Directional Control Valve ORSTA 16-01.1 16-23 .1 16-40.10 TGL 20705 Pn 10 bar with base plate Dimensions: 230 x 110 x 95 mm

Directional Control Valve ORSTA 25-01.1 TGL 20705 25-23 .1 25-38.1 ED 100 220 V AC Pn 10 bar New ! Dimensions: 330 x 115 x 150 mm

Directional Control Valve ORSTA 01.1 - TGL 20705 25-23 .1 25-38.1 ED 100 220 V AC Pn 1 MPa Dn 25 New ! Dimensions: 360 x 115 x 150 mm

directional control valve ORSTA 10.10 - TGL 20705 25-23 .1 25-38.1 ED 100 220 V AC Pn 1 MPa Dn 25 New !' Dimensions: 300 x 115 x 150 mm

Pneumatic cylinder ORSTA Pn1A 80x80 B TGL 42869 Piston diameter: Ø 80 mm Rod diameter Ø 25 mm stroke: 80 mm New ! Dimensions: 345 x 105 x 105 mm

Pneumatic cylinder ORSTA Pn1A 100x125 B TGL 20747 Piston diameter: Ø 100 mm Rod diameter Ø 25 mm stroke: 125 mm New ! Dimensions: 390 x 125 x 125 mm

Directional Control Valve ORSTA 01.1 - TGL 20705 25-23 .1 25-38.1 Pn 1 MPa Dn 25 New ! Dimensions: 330 x 105 x 90 mm

Directional Control Valve ORSTA 2,2 5 - 16.003/1 TGL 20710 16.003/1 TGL 20710 nominal diameter: 2.5 mm nominal pressure: 1.0 MPa ( 10 bar ) control voltage: 24 V DC rated current: 0.36 A New !' Dimensions ( with plug ): 75 x 42 x 80 mm

Directional Control Valve Base ORSTA Dn25 - TGL 20705 Pn 1 MPa ED 100 TGL 43334 220 V AC New ! Dimensions: 310 x 1110 x 65 mm

Pneumatic valve ORSTA, REGLERWERK DRESDEN Type: 1.110 142 TGL 201/87 New ! Dimensions: 100 x 115 x 100 mm

Coolant Valve OMAL Type DA (for Tacchella A160)

Engine Brand: PERKINS, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 390 Kw, Rated Speed: 1500 Rpm, Injection Type: ECU (Electronic Control Unit) , Generator KVA: 330 , Generator Hz: 50 , Generator Volts: 230/400 , Generator Amps: 476 , Generator Tank Capacity: 600 Liter(s), Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/203831, , = More information =, , Empty weight: 6.285 kg, Type number: GEH330 GENERATOR 330 KVA

Engine Brand: DORMAN, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 279 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 255 , Generator Hz: 50 , Generator Volts: 415/240 , Generator Amps: 354 , Generator Fases: 3 Fases , , https://www.hamofa.com/catalog/product/view/id/6969, , = More information =, , Empty weight: 4.500 kg, Type number: MF/280/DD GENERATOR 255 KVA

Engine Brand: Poyaud Diesel, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 295 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/poyaud-diesel-6-scpzlr-use d/166, , = More information =, , Type: Engine, Year of construction: 1010, Type number: 6 SCPZlr; Transport weight [kg]: 2250

Engine Brand: MERCEDES, Conditie: NEW, Nominal Power @ Nominal Rpm: 220 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO INTERCOOLER , Bore: 106 mm, Stroke: 136 mm, Engine Capacity: 7201 cc, Qty Cylinders: 6 Qty, Emission Certificate: EURO 3 , Engine Fuel Type: DIESEL , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/catalog/product/view/id/226614, , = More information =, , Type: Engine, Type number: OM 926.929; Transport weight [kg]: 671

Engine Brand: MERCEDES, Conditie: RECONDITIONED, Nominal Power @ Nominal Rpm: 130 Kw, Emission Certificate: EURO 3 , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Black , Engine Condition: Rebuild , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: No , Starter Voltage: No Starter Present , Rated Power: 150 Kw, Rated Speed: 2200 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/catalog/product/view/id/221632, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: OM 906.991; Transport weight [kg]: 600

Engine Brand: MERCEDES, Conditie: CORE, Nominal Power @ Nominal Rpm: 213 Kw, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: NATUURLIJK AANGEZOGEN , Bore: 130 mm, Stroke: 142 mm, Engine Capacity: 15080 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Core , Turbo Type: None Mounted , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/218696, , = More information =, , Type: Engine, Year of construction: 1010, Type number: OM 442.925; Transport weight [kg]: 870

Engine Brand: MERCEDES, Condition: USED, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Fuel Type: Diesel , Engine Cooling Type: Radiator Cooled (std) , Engine Color: Orange , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 254 Kw, Rated Speed: 1900 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om442-901-400-use d/330, , = More information =, , Type: Engine, Year of construction: 1010, Type number: OM442.901-400; Transport weight [kg]: 1090

Engine Brand: MERCEDES, Conditie: USED, Nominal Power @ Nominal Rpm: 320 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: No Flywheel , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/273207, , = More information =, , Type: Engine, Type number: OM 442.901; Transport weight [kg]: 1250

Engine Brand: MERCEDES, Conditie: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Working Hours: 300 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Starter Voltage: 24 Volt , Rated Power: 350 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/mercedes-om403la-used-engi ne-parts/22397, , = More information =, , Type: Engine, Type number: OM403.999; Transport weight [kg]: 1700

Engine Brand: MERCEDES, Conditie: USED, Nominal Power @ Nominal Rpm: 210 Kw, Engine Injection Type: MECHANISCHE INJECTIEPOMP , Engine Aspiration Type: NATUURLIJK AANGEZOGEN , Bore: 130 mm, Stroke: 142 mm, Engine Capacity: 15080 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: No , Rated Power: 350 Kw, Rated Speed: 2000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/219484, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: OM 442.909; Transport weight [kg]: 1080

Water treatment plant Manufacturer: BWT Type Osmotron 2000-PH-S System was overhauled in 2020, new control cabinet from 2021 Year of construction 2000 BWT Osmotron water treatment plant of BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production 1 piece of water treatment plant BWT Osmotron Plant of the company BWT Pharma & Biotech GmbH for 2000l/h Aqua Purificata production, incl. • 90μm pre-filter with automatic backwash • Softening system in series operation (without hardening slip) and for 600 litre salt-plastic tank for regeneration • Heyl Testomat 2000 • 2 chlorine cells to reduce germs in the softeners • Reverse osmosis modules for 2000l/h • 4x SM20 EDI modules (electro-deionization modules) • Conductivity meter for permeate (after reverse osmosis module) Mettler Toledo • Conductivity meter for diluate (according to EDI modules) THORNTON 200C ...

Engine Brand: MERCEDES, Conditie: USED, Nominal Power @ Nominal Rpm: 320 Kw, Engine Injection Type: DIRECTE INJECTIE , Engine Aspiration Type: TURBO , Bore: 128 mm, Stroke: 142 mm, Engine Capacity: 14618 cc, Qty Cylinders: 8 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 260 Kw, Rated Speed: 2100 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/catalog/product/view/id/297188, , = More information =, , Type: Engine, Empty weight: 1.060 kg, Type number: OM 442.901

Inverter con filtro

sheet width: 1550 mm plate thickness: 3 mm total power requirement: 3 kW weight of the machine ca.: 1600 kg dimensions of the machine ca.: 2.060 x 1.140 x 1.210 mm Producer: OSTAS Type: RGM 1050 x 3 YOM: new Max. Shearing Length: 1.050 mm Shearing Capacity: 3 mm Shearing Angle: 2°30 Strokes Per Minute: 35 d/d Motor Power: 3 kW Table Width: 510 mm Table Height: 820 mm Rear Gauge Distance: 500 mm Dimensions of the machine (LxWxH): 1.640 x 2.060 x 1.210 mm Weight: ca. 1.100 kg Additional information: • Manual backgauge with 500 mm stroke • Squaring arm with T-slot, stopper and ruler • Foot pedal • Front sheet holding arms • Cutting line lighting • Protection Cages optional: • Cutting unit counter • Motorised backgauge with 500 mm stroke • Backgauge with NC control • Pneumatic Sheet Support System • Optical security bar • 0-180° angle cutting The data for thi ...

turning diameter over bed: 400 mm turning diameter over slide rest: 245 mm turning length: 800 mm total power requirement: 4.5 kW weight of the machine ca.: 1.25 t required space: 1.96x1.69x1.06 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Gruppo PLC Omron

Wide belt grinding machine OTT RS-O Grinding width: 1300mm Calibration roller + fine sanding + cleaning brush

a pasteurization unit with pouch packer for liquid product Find more here - /

Control PC-NC Dialog Travel X/Y/Z: 1000/1510/700 mm C-axis 30-fold electrode changer Hirschmann clamping system Bearing surface WxD 1140/1640 mm Load capacity 7500 kg Filter system Fire extinguishing system

5.500 bph Bertolaso brand bottling line Model: MONOBLOCK OLIMPIA 25/25/4/1/1 Designations: Rinser, filler, corker, derh cap, capper, crown corker, cap feeder, cork feeder, bottle washer-dryer, stainless steel chain. Product - Still wine Bottle sizes Round 375ml, 500ml, 750ml, 1000ml and 1500ml Diameter max 110+/-2mm Diameter min 55+/-2mm H of the bottle max 360mm H of fl. min 180mm Capacity 5.500 bph with 750ml bottle With the plant we fill on average approx. 1Mio. bottles per year. Find more here - /

used very little (max 4000 hours) and are in excellent condition. ORC turbine of 160 kW electrical and about 700 kW thermal, Since 2001, Triogen has been developing and manufacturing systems for conversion Organic Rankine Cycle (ORC) energy conversion systems. The generator TRIOGEN ORC, which has been used in various application areas since since 2005, is similar to a steam cycle, but uses a fluid organic instead of water. Compared with steam, it allows to achieve better performance and efficiencies by exploiting sources of low-temperature heat. The Triogen ORC generator is suitable for the conversion of heat from: + Natural gas engines + Biogas engines + Landfill gas engines + Biomass + Biodiesel engines + Diesel engines + Gas from flares + Gas turbines + Process heat + Furnace heat + Any heat source >350 °C 165 kWe DI ELECTRICITY WITHOUT FUEL AND EMISSION-FREE  ...

Powder coating plant Complete line for automatic powder coating The line was operated by us until the end of February and until then it was functional and as required has coated 1 or 2 coats. The complete line includes the following elements: 3 zone spray washing system (DEGREASING): Manufacturer OMT Otto Müller GmbH, Fellbach Year of construction 1997 The pretreatment tunnel is a unit of the painting line, where the surface treatment of the parts is carried out by spraying with chemical solutions. solutions. Its purpose is to degrease and clean the surface of the parts. Dimensions approx: - Length 13.000 mm - width 230 mm - Height 3950 mm (tunnel and fan in total) Dimensions of workpieces: - Length 1,200 mm - width 300 mm - height 600 mm AUTOMATIC SPRAY BOOTH: Company ESB Vöhringer GmbH (now Wagner GmbH) Series: IC-3 Type: A2M 8000 year of construction 1989 Ext ...

OPS 550 from the company OPS INGERSOLL Funkenerosion, built in 2008. the machine includes adjustable feet and 3 chucks. Find more here - / Contact us at -

2016 OCE Varioprint 6200 ( Speedupgrade ) is 6250 because its been upgraded. Very fast black and white digital printing machine Speed ​​200 A4 pages/minute 1 PaperInput module (4 compartments) 1 HighCapacityStacker BLM 200 Booklet Maker Trimmer BLT289, Squarefoldmodul SFM204 Top-Cover R-sided Docking DFD2 Interface PCL Streaming Year of construction 2016 Counter: 75.262.000 The machine is dismantled now Find more here - / Contact us at -

Göpel Electronics Opticon Smartline The software dongle would have to be renewed at Göpel, which we can arrange Find more here - / Contact us at -

2626 OMAX JetMachining Center Water jet system The machine has been completely overhauled and has very few operating hours. Machine type 2626. Size LxWxH 106х77х96. INNOMAX desludging system, OMAX EnduroMAX pump P5060 and INNOMAX abrasive conveying system also included. High-precision premium waterjet cutting The first-class OMAX JetMachining® Centre was developed for advanced systems, where performance and results are paramount. The OMAX JetMachining Centre is a true hard worker for production in any manufacturing environment and delivers: - Manufacturing high-precision multi-axis parts quickly and consistently with OMAX IntelliMAX® software - Improved efficiency with EnduroMAX® pumps that deliver the highest nozzle performance - Reduced maintenance with durable and hardwearing materials - Increased uptime through improved IntelliVISOR® system monitoring - Better end ...

2016 ONLINK Technologies SIGMET-2000V High vacuum coating machine The system coats even the most complex 3D molded parts made of metal, glass or plastic with aluminum and achieves exact, precise quality and flexibility. Total machine operating hours: 700 hours. Characteristics: - Double door arrangement for high productivity - Precise drive system - Planetary drive for even coating - Vertical arrangement of the substrate holders - Modular and very flexible structure - Annealing pretreatment by alternating or direct current - Annealing pre-treatment by MF (40 kHz) - Recipe management and process visualization - Base coat - PECVD process - Top Coat (protective layer) - PECVD process - Highly effective and fast vacuum system - Remote maintenance Typical applications: - Automobile – inside and out - Cosmetics - Household and furniture - Glass and bottles - Decorative  ...

Production machine for making idefications bracelets e.g. for entry and access control made of PE or PE-LD roll goods. The machine was manufactured as a special machine by the company OKU. The system has not had many operating hours and is in very good condition. Function can be summarized as follows: unrolling – punching – inserting closure parts – separating into sheets – storing. Dimensions: approx. 8m length - approx. 6m width - approx. 2.5m height Machine in well-maintained condition with few running hours Processor: roll goods 350mm wide.. Stanze: for wide and narrow Versions: Feeding route: feed path to the vibration sensors for attaching the closure parts Delivery route: display of the sheets counted in boxes... Production Machine for Identification Bracelets see pictures This production machine is designed for manufacturing identification bracelets used ...

Manufacturer: OKUMA Model : Eurocenter V50 Year of construction : 2007 Operating hours: 11465 Accessories: dividing head, coolant tank with pump. Voltage: 400 V Phases: 3 Phase Frequency: 50 Hz Current: 28 A Power: 32 kW Fuse Rating: 45 A Certification: CE marked Find more here - / Contact us at -

Manufacturer: BvL Series : Ocean RW Model: 1250 2T Year of Manufacture: 2019 General Data - Max Length: 1000 mm - Max Width: 750 mm - Max Height: 750 mm - Diagonal: 1250 mm - Max Load Capacity: 500 daN = 500 kg (even load distribution is required to avoid static issues) - Operating Voltage: 3 x 400 V, N+PE, 50 Hz Find more here - / Contact us at -

Aerosol Jet Printer Model - AJ300CE The Optomec AJ300CE Aerosol Jet Printer, introduced around 2011, is an additive manufacturing system designed for high-resolution, non-contact printing of electronic and biological materials onto various substrates, including non-planar surfaces. It utilizes Aerosol Jet technology to deposit fine-feature patterns with feature sizes as small as 10 micrometers. Key Features: - High Precision Printing: Capable of producing feature sizes down to 10 µm, enabling the creation of intricate patterns necessary for advanced electronic components. - Versatile Material Compatibility: Supports a wide range of materials, including conductive, resistive, and dielectric inks, with viscosities ranging from 1 to 1000 cP. - Non-Contact, Conformal Printing: The non-contact deposition process allows for printing on complex, three-dimensional surfaces without damagin ...