o h used for sale

Stick electrodes 5.0 x 450 -Type: Supercito E51 55 B 10 -Price: per package -Number: 13 packages available -Weight per package: 5.5 kg

Stick electrodes 4.0 x 450 -Type: Extra EY 42 53 Mn B -Price: per package -Number: 29 packages available -Weight per package: 5.4 kg

Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120 SO -Stroke: max. 500 mm -Piston: Ø 40 mm -pneumatically operated -p. Max. Pressure 8 bar -Number: 8x cylinders available -Price: per piece -Dimensions: 800/70/H100 mm -Weight: 5 kg

impressions: 0 Mio. max. printing speed sheets: 1800 /h max. paper size: 30 x 45 cm max. speed: 1800 in A4 /h max. speed: 900 in A3 /h serial no.: 280000960 Dimensions (L/W/H): 180/105/170 cm weight: 450 kg digital printing system for colour prints The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Chassis, electric motor, DC motor, traction motor, drive motor -Chassis for pedestrian stacker make: OMG type 214EA -with: recording and drive -Dimensions: 270/350/H285 mm -Weight: 38 kg

Linear drive, linear gear, lifting gear, spindle drive, rodless pneumatic cylinder -Travel: 450 mm -Piston diameter: 25 mm -Dimensions: 40/40/H650 mm -Weight: 1.6 kg

Refrigerant recovery system, vacuum pump for air conditioners, air conditioners, refrigeration units, differential pressure gauge -For use in: air conditioning systems with recovery, CFC, HFC and HCFC -Dimensions: 300/400/H320 mm -Weight: 19kg

Slicer IFE 2 x 5 m 1 Deck Version Screen lining, wire cross-tensioned Very good condition, few operating hours from a pilot plant

electric motor, three-phase motor -shaft output on both sides -Power: 4 kW -Speed: 1435 rpm -Shaft: Ø 28 x 130 mm -Shaft: Ø 30 x 95 mm -Design: B3 -Dimensions: 600/380/H420 mm -Weight: 80 kg

B+S/Heino Ilsemann/Bosch/OCS/Pester Labelling & packing line for ampoules and vials comprising: Bausch + Ströbel ESA 1025 high output self-adhesive labelling machine suitable for ampoules/vials, object diameter up to 36 mm, object height up to 140 mm, output up to 370 1ml.-ampoules/vials per minute and up to 290 5ml.-ampoules/vials per minute direct transfer of the ampoules (vials are directly fed to the Bosch CAR T5 cartoner) to Heino Ilsemann BMP-400 blister machine for ampoules in blister without lidding foil, automatic feeding system for placing the ampoules into the blisters, max. drawing depth 35 mm, max. forming width 270 mm, max. usable punching area 250 x 180 mm, punching cycles max. 40 per minute, capacity up to 320 blister per minute Bosch CAR T5 horizontal cartoning machine, intermittent motion, carton size range from 20 x 16 x 60 mm (AxBxH) up to 95 x 70 x 200 mm (AxBxH ...

Tool setting device, tool presetting device, cutter setting device -Presetting device for: milling tools -maximum hob diameter: 500 mm -maximum height of the cutters: 500 mm -Dimensions: 800/400/H1600 mm -Weight: 242 kg

CNC control, control panel, machining center -Removed from a: CNC lathe, manufacturer: Okuma, type: LB15 -complete unit -Dimensions: 790/600/H495 mm -Weight: 79 kg

WE OFFER AN NICE CONDITION TWIN ROBOTI WELDING CELL YEAR 2012, MACHINE WAS USED IN PRODUCTION FROM 2012 TO 2019 MACHINE WE CAN PUT FOR CUSTOMER ON GROUND, START UP AND MADE AN OPERATORS TRAINING POSITIONER IS HORIZONTAL TURNING: SEE VIDEO LENGHT OF POSITIONER: 4 METERS MAX LOAD PER SIDE PALET 750KG ROBOTS 2X OTC MODEL: NV61-NEFN ROBOTS CONTROL: AX-21 CV0000 WELDING MACHINES 2X FRONIUS CMT TOOLINGS PALET CAN BE CHANGING WE CAN OFFER ALSO TOLINGS FOR THE CUSTOMER PRODUCT :

PLC control -Type: Simatic S7 6ES7 321-1BL00-OAAO -Number: 39 x available -Price: per piece -Weight: 0.4 kg

PLC control -Type: Simatic S7-300 -Digital output: SM 322, -Potential green, 32DA, DC24V, 0.5A, -1 X 40 PIN., -Total current: 4A/group -Number: 13x available -Price: per piece -Weight: 0.4 kg

Profibus single module, Profibus single module, for PLC control, fieldbus, PROFIBUS -Number: 55x Profibus plugs available -Price: per piece -Weight: 0.04 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 45 mm -Assembled tool: Ø 75 x 50 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 240/95/H95 mm -Weight: 6 kg/piece

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 31 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Price: per piece -Dimensions: 220/95/H95 mm -Weight: 3 kg/piece

- 6 bottle lines - WITHOUT OZONE GENERATOR - Machine in working order - Machine available immediately - Video available on request

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 22 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 210/95/H95 mm -Weight: 3 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 40 x 40 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Tool holder, milling tool holder -Recording: SK50 -Tool holder: Ø 50 x 55 mm -Drill chucks: Surface clamping chucks, reducing sleeves, cutter heads, end mills, spindle tools -Number: 1 recording available -Dimensions: 220/95/H95 mm -Weight: 4 kg

Linear drive, linear gear, screw jack, spindle drive -Manufacturer: ORIGA -Type: P120-25 -Stroke: max. 1310 mm -pneumatic: operated -p max.: 8 bar -Dimensions: 90/90/H1660 mm -Weight: 12 kg

Labelling machine SACMI Opera capacity: approx. 12.000 bph - 1,0 ltr. PET bottles year of manufacturing: 2008 running direction: from left to right with Siemens S7 control good condition

For sale is: 1 Piece Used Plasma Flame Cutting Machine Manufacturer: Oxy2000 Mai Year: 2005 Weight: 5.000Kg Table: 2,000 x 3,000mm Power Source: Hypertherm plasma cutting system Max. cutting capacity Structural steel: 38mm stainless steel: 25 Aluminum: 25mm If required, we also have a Kemper extraction system on offer. However, this is not part of the offer. Machine can be viewed in our warehouse in 09599 Freiberg.

MUTI chain mortiser and bits model OMS 4MM for locks: • Vertical unit with chain, 3 hp motor • Vertical unit with 2 points, 0.75 hp motor • Horizontal unit with 2 points, 2.5 hp motor • Weight approx. 550 kg • Machine not according to CE standards, for export AVAILABILITY FROM APRIL 2024

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 40 mm -Piston diameter: 63 mm -Piston rod: Ø 20 mm -Total length: 260 mm -Total length extended: 300 mm -Dimensions: 75/75/H260 mm -Weight: 2 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 63 mm -Piston diameter: 40 mm -Piston rod: Ø 16 mm -Total length: 250 mm -Total length extended: 313 mm -Dimensions: 53/53/H250 mm -Weight: 1 kg

ORMA disc gluing and screwing machine according to CE standards 4-roll gluing machine model I/413 with: - Working width 1300mm - Useful working height 100mm - double motorization, kw 0.75+0.75 - coating rollers D=250mm - dosing rollers D=180mm - with automatic brush washer Disc route with: - Useful working dimensions 3000x1300mm - Mechanical variable speed drive - with final photocells Year 2007, machines according to CE standards.

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 160 mm -Piston: Ø 80 mm -Piston rod: Ø 25 mm -Total length: 430 mm -Total length extended: 590 mm -Number: 4x available -Price: per piece -Dimensions: 95/95/H430 mm -Weight: 4.9 kg

Taper clamping bushes, clamping bush -Type: 1615 - 25 - Bore: 25mm -Dimensions: Ø 57/38 mm -Number: 2 available -Price per piece -Minimum purchase: complete -Weight: 0.41kg

heavy gear, angular gear -Translation: 1:16 -Drive shaft hollow shaft: 38 mm -Output shaft shaft: 48 mm -with claw coupling: -Number: 1 piece gear available -Price: per piece -Dimensions: 470/240/H445 mm -Weight: 59 kg/piece

Filtration plant, Fabr. Seitz Orion, 100 x 100, for 180 hl/h, factory overhauled in 2002, consisting of: - Diatomaceous earth frame filter, with 29 KG frame in stainless steel, external risers, sight glass fittings with pressure gauge, with KG discharge tray with screw in stainless steel, with KG dosing device - Sheet filter, with 150 VA plates, external risers, sight glass fittings with pressure gauge - Control platform between both filters, step at the KG filter - Control cabinet

electric motor, three-phase motor -Power: 0.75 kW -Speed: 910 rpm -Shaft diameter: 24 mm -Design: B3 -Protection rating: -Dimensions: 365/255/H215 mm -Weight: 33 kg

Electric motor, three-phase motor -Power: 1.1 kW -Speed: 1420 rpm -Shaft diameter: 22 mm -Construction: B3 -Protection class: IP 33 -Number: 1x motors available -Price: per piece -Dimensions: 370/260/H220 mm -Weight: 34 kg

Gear motor, electric motor, three-phase motor -Speed: 153 rpm -Power: 0.18 kW -Voltage: 220 V -Construction: B3 angle -Shaft diameter: Ø 12 mm -Protection class: IP 44 -Number: 1x engine available -Price: per piece -Dimensions: 290/125/H180 mm -Weight: 5.7 kg

OMEC TA185 crosscut saw Maximum cutting height 180mm Maximum cutting width 900mm Saw blade diameter 550mm Pneumatic material clamping Pneumatic saw passage Saw control with two buttons 7.5kw main motor 2x roller tables length 160cm each CE Certified White Paper

Used fluid bed dryer mady by Bühler model OTWG-160, new 1996. Technical data: - Weight 1050 kg - Content m³: 2.7 - Max. operating vacuum up to 250°C. bar: + 0.1 - Max. operating vacuum up to 150°C. bar: - 0.1 - Max. operating temperature: 250 C°.

Gear motor, electric motor, three-phase motor -Speed: 95 rpm -Power: 0.25 kW -Construction: B5 -Diameter shaft: Ø 16 mm -Protection class: IP 55 -Dimensions: 360/140/H200 mm -Weight: 11.8 kg

Gear motor, electric motor, electric gear motor -Speed: 80 rpm -Power: 0.37 kW -Construction: B3 angle -Diameter shaft: 20 mm -Protection class: IP 33 -Dimensions: 420/250/H200 mm -Weight: 18.5 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter -Adapter for the cone in the chuck of a lathe -Outside mount: MK8 (Ø80 mm to Ø75 mm) -Number: 10x recordings available -2x holder: inside tool MK6 -6x holder: inside tool MK5 -Price: per piece

Orgapack Cordless Strapping Tool, OR-T 250, Incl. Battery and Quick Positioning Tool

Gear motor, electric motor, three-phase motor -Speeds: 200 rpm -Power: 0.37 kW -Construction: B5 -Diameter shaft: Ø 20 mm -Protection class: IP 55 -Number: 1x motors available -Price: per piece -Dimensions: 420/180/H160 mm -Weight: 16 kg

Line defrosting transformer, defrosting device, pipe defrosting device -Type: LA125 -Primary: 220 V/13 A -Secondary: 56 V/60-125 A -Dimensions: 430/200/H400 mm -Weight: 40 kg

Gear motor, electric motor -Speed: 160 rpm -Power: 0.25 kW -Construction: B3/5 angle -Diameter shaft: Ø 20 mm -Protection class: IP 33 -Dimensions: 325/210/H195 mm -Weight: 13 kg

Gear motor, electric motor -Speed: 118 rpm -Power: 0.15 kW -Construction: B3 angle -Diameter shaft: Ø 20 mm -Protection class: IP 44 -Brake -Number: 1x motors available -Price: per piece -Dimensions: 400/200/H200 mm -Weight: 12.5 kg

Three-phase motor, electric motor -Power: 9.5 kW -Speed: 1440 rpm -Shaft: Ø 42 mm -Construction: B3 -Protection class: IP 33 -Dimensions: 730/430/H375 mm -Weight: 163 kg

sheet width: 700 mm plate thickness: 2,0 mm distance between columns: 750 mm diameter of upper rolls: 76 mm total power requirement: ß,75 KW weight of the machine ca.: 0,29 t dimensions of the machine ca.: 1,3 x 0,8 x 1,3 mm Sheet bending machine with: - Capacity 1050 x 2 mm - High strength wrought iron rollers with SAE 1050 certificate. - Upper and lower roller driven, feed roller without drive - Footswitch - conical bending - Swiveling top roller - Safety device emergency leash - Documentation - 400 volts - CE certificate The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

SECOND-HAND VERTICAL SANDER WITH 2 BELTS OMA MOD. UNICA - transversal sanding on two sides of straight or shaped / curved elements - n. 2 motors for abrasive belts 7.5 hp each - n. 2 abrasive belts 3700x90 mm - Automatic feeding 4-20 m / min - minimum working length 320 mm - Max. piece height 130 mm - CE year 2001

Inv. Num. : 5274 Type: OPTIMAT A 42 Producer: MAS Created: 2005 Parameters: Max. rod diameter: 42 mm Maximum bar length: 3000 mm Maximum spindle speed: 3520 1/min Number of tools: 6 pieces Total power requirement: 10 kW Weight: 2500 kg Equipment: Technical Documentation Collets Tool Holder Shovel Piece counter 4 cross slides Device for longitudinal turning on the first carrier of the machine driven by its own curved disc Equipment for guiding material bars IVT 50