o h used for sale

; Power [PS]: 272; Gross weight [kg]: 2035; Engine: Perkins 1506A-E88TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 218; Gross weight [kg]: 1548; Engine: Perkins 1106A-70TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

; Power [PS]: 179; Gross weight [kg]: 1434; Engine: Perkins 1106A-70TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

; Power [PS]: 163; Gross weight [kg]: 1341; Engine: Perkins 1106A-70TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 327

; Power [PS]: 544; Gross weight [kg]: 3661; Engine: Perkins 2506A-E15TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 598; Gross weight [kg]: 3699; Engine: Perkins 2506A-E15TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Gross weight [kg]: 5938; Engine: Perkins 4006-23TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1494

; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 489; Gross weight [kg]: 3253; Engine: Perkins 2206A-E13TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 326; Gross weight [kg]: 2110; Engine: Perkins 1506A-E88TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 359; Gross weight [kg]: 2261; Engine: Perkins 1506A-E88TAG5; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Power [PS]: 239; Gross weight [kg]: 1533; Engine: Perkins 1106A-70TAG4; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 394

; Gross weight [kg]: 385; Engine: Perkins 404A-22G; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 55

; Power [PS]: 2039; Gross weight [kg]: 11207; Engine: Perkins 4012-46TAG3A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger

; Power [PS]: 925; Gross weight [kg]: 5040; Engine: Perkins; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1702

; Power [PS]: 54; Gross weight [kg]: 764; Engine: Perkins 1103A-33TG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Gross weight [kg]: 7408; Engine: Perkins 4008-TAG2A; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

; Gross weight [kg]: 5847; Engine: Perkins 4016TAG1A; Accessories: Control Panel, Including: Coolant heater and battery charger

; Power [PS]: 1496; Gross weight [kg]: 9119; Engine: Perkins 4012-46TWG2A; Accessories: Battery, Control Panel

; Gross weight [kg]: 10388; Engine: Perkins 4012-46TAG2A; Accessories: Battery, Control Panel

; Gross weight [kg]: 7753; Engine: Perkins 4008-30TAG3; Accessories: Battery, Control Panel, Including : coolant heater and battery charger

Complete gate line , with log task - Remote controlled clamping car - Gate Müller with sideware crosscut saw, complete mechanization, cut saw Paul S900 SH 180 mm, sour paul KME II /1000, chopping system Rudnick&Enners 200/600 etc...

; Gross weight [kg]: 4202; Engine: Perkins 2806A-E18TAG1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Gross weight [kg]: 2068; Engine: 1506A-E88TAG3; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 528

; Gross weight [kg]: 3161; Engine: Perkins 2206A-E13TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 888

; Power [PS]: 120; Gross weight [kg]: 1254; Engine: Perkins 1104C-44TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 218

; Power [PS]: 71; Gross weight [kg]: 778; Engine: Perkins 1103A-33T; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145

; Gross weight [kg]: 4342; Engine: Perkins 2806A-E18TAG1A; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Gross weight [kg]: 4522; Engine: Perkins 2806A-E18TAG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 1132

; Power [PS]: 96; Gross weight [kg]: 944; Engine: Perkins 1104A-44TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 180

In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg

In-line drilling rigs with 8 pieces of drilling spindles for the processing of easily machinable materials such as wood - aluminium - non-ferrous metals, composite materials and various plastics. Each of the drilling units produces 450 watts. Infinitely adjustable drilling feed speed Infinitely adjustable drilling depth and return path of the drilling unit. Slanted holes in the range +/- 30°. Pneumatic workpiece tension Table size 3,000 x 800 mm (optionally larger) Working height approx. 870 mm. Horizontal adjustment of the drilling units 240 mm. Vertical adjustment of the drilling units 320 mm. Dimensions 3 x 1.25 x H 1.98 m Weight approx. 1,000 kg

Automatic action Checkweigher OCS model EC Year of construction: 2003 Weighing cell: 3000 Control measurement: up to 1,500 g Temperature: from + 5 °C up to 40 °C Power: 115/230 V/50 Hz Scale range e = 0.2/0.5/1.0 g Scale range d = 0.1/0.2/0.5 g Including PCE YEAR 2010 Datamatrix station: Power: 230 V - 50 Hz Air supply: 6 - 8 bar.

4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...

continuous grilling line all stainless steel bottom contact grilling + hot air suitable for steam injection belt width 1,100 mm net length 11,000 mm underplate max. 260°C air temperature max. 280°C dimensions (l x w x h) : x 13,500 x 1,700 x 2,400 mm independent platen - air temperature and steam control adjustable speed PLC control Siemens frequency (new hard- and software, frequency inverters) With new Teflon belt suitable for thermic oil heating (600 kW) with belt wash system

; Power [PS]: 120; Gross weight [kg]: 1410; Engine: Cummins 6BTA5.9-G5; Accessories: Tanker, Battery, Control Panel, Incl. Coolant Heater and Battery Charger; Water Tank Volume [l]: 400

Robust, high-quality beading and flanging machine with electric motor drive, optionally available with hydraulic bending roller delivery - optionally available with circular cutting device Largest sheet thickness, which is malleable - 3 mm steel sheet/ST40, maximum extension 450 mm, maximum distance between the top and lower roller 100 mm, two working speeds 6 and 33 rpm - available at additional cost with infinitely adjustable working speed and frequency converter, Time relay for limiting the working cycle, possible round diameter when using the circular cutting device between 300 mm and 1,200 mm (optional up to 1,620 mm), cutting power with the shear blades 3 mm steel sheet/ST40, drive power 1.8 kW – drive power hydraulics 1.5 kW, weight of the base machine 570 kg

Robust, high-quality manual sheet metal bending machine (swing bending machine) Largest bending length 3,080 mm, highest bending performance over the entire bending length - steel sheet/ST40 - 1.2 mm - stainless steel sheet 0.6 mm - zinc sheets, copper sheets, aluminium sheets - 1.5 mm, largest opening width of the upper cheek 68 mm, largest bending angle 160°, working height approx. 930 mm, dimensions 3.55 x 0.75 (without rear stop) x H 1.3 m, weight 930 kg Equipment: automatic opening of the upper cheek (patented) when lowering the bending cheek – two opening widths can be adjusted 15 mm and 65 mm, adjustable angle stop for repeat-accurate series bends, weight equalization of the bending cheek for easy machine operation, buttoned upper cheek to press folds. Optionally at an additional cost, the machines are equipped with a rear stop with 750 mm travel - as well as with a bead  ...

Robust, high-quality round sheet bending machine for already profiled workpieces (sheet blades) - with motor drive at the bottom and top adjustable workpiece width between 300 mm and 800 mm, largest sheet thicknesses which can be bent round copper / titanium zinc / aluminium 0.8 mm - galvanized steel sheet 0.7 mm - stainless steel sheet 0.5 mm, smallest possible bending radius 350 mm - bending radius depending on the yield strength - smallest bending radius galvanized steel plate 0.7 mm - 1,000 mm, continuous speed infinitely adjustable 1 to 6 m/min, drive capacity 2 x 0.75 kW, weight 375 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set) with polyurethane coated steel rollers, infinitely adjustable rotation speed, high frequency protected, right and left run, the largest load capacity of the two units together 10,000 kg, Workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.18 kW, drive rollers made of steel dia. 250 x 160 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit together) approx. 270 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler rollers), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run, maximum load capacity of the two units together 14,000 kg, Workpiece diameter 600 mm to 5,500 mm, drive power 2 x 0.55 kW, steel drive rollers of 400 x 100 mm, rotation speed 120 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see illustrations, weight of the set (driven and non-driven unit approx. 870 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 1.5 mm, upper cheek angle 160° - upper cheek stroke range up to 160 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 3 kW, dimensions approx. 4.3 x 1.8 m x 1.65 m, weight 2,700 kg

CNC - controlled electromotor precision sheet cutting machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 3,100 mm, maximum sheet thickness ST42 - 3 mm, upper cheek angle 160°/140° - upper cheek stroke range up to 240 mm, Rear stop with 12 foldable stop fingers - stop range 12 to 750 mm (optional 1,000 mm or 1,500 mm) - travel speed adjustable - up to 500 mm/sec, working height approx. 830 mm, drive power 9 kW, dimensions approx. 4.6 x 1.8 m (depending on rear stop) x 1.9 m, weight 3,800 kg

CNC - controlled electro-hydraulic precision long-bending machine (swing bending machine) with automatic bending angle monitoring 15" touchscreen with graphics - selector switch for one- or two-person operation, maximum bending length 6,050 mm, extension 1,250 mm, maximum sheet thickness ST42 - 3 mm, maximum bending angle 135° - upper cheek opening range up to 200 mm, rear stop with foldable stop fingers - stop range 12 to 1,200 mm - inclination up to 40° - travel speed adjustable up to 500 mm/sec, working height approx. 830 mm, drive power 7.5 kW, dimensions approx. 6.4 x 1.8 m x 1.5 m, weight approx. 8,500 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

Manual cut-out shears of excellent quality, for the burr-free cutting of sheet metal up to 1.5 mm sheet thickness steel sheet/ST40 – aluminium 2 mm, backdrop-guided knife beam, shear length 150 x 150 mm, clink angle 90°, dimensions 460 x 500 x 810 mm, weight 75 kg

NC - controlled mechanical sheet metal panel scissors in backdrop cutting design, maximum cutting length 1,050 mm, maximum cutting capacity 4 mm steel sheet/ST40, cutting angle 1.5°, NC - controlled rear stop with 1,000 mm travel range - automatic removal of the stop rail at sections lower than 1,000 mm - optionally available with a foldable sheet support at the rear stop or a conveyor belt with upliftrs, drive power 5 kW, weight approx. 2,500 kg

Attachment for an excavator Stone barrel, concrete cutter, surface milling machine, drum barrel, attachment cutter, cross-cutting head cutter used O&K Orenstein and Koppel SN1487569 940963 211.22.25.42 Cutter diameter s. 670 mm Width: approx. 1300 mm Tool holder approx. 30 mm Ambauschild approx. 700 x 570 mm Hole size approx. 580 x 420 mm Bore approx. 275 mm Total dimensions: 1400 x 1300 x 670 mm Subject to changes and errors in technical data, information and prices as well as intermediate sale

For the production of snap folds and Pittsburgh folds, we supply folding forming machines, which produce a folded workpiece from a wide variety of sheet metal materials using a rollforming process from a flat sheet metal strip. Frm Rolling machine for the production of snaplock folds (snap folds) and S- or L-shaped folds up to 32 mm output length – as well as Pittsburgh folds with 13 mm folding height, Material thicknesses that can be rolled-reshaped - steel + aluminium 0.6 mm to 1 mm - stainless steel 0.6 to 0.7 mm, forming stations 9 pieces - throughflow speed 15 m/min, e-instances per meter 20 pieces - punch ingesrant distance 50 mm, dimensions approx. 2.3 x 0.7 m x H 1.1 m, drive power 3 kW, weight 450 kg