129,003 used machines on RESALE, but how to find them? Machine Search
Siemens Panorama dental x ray Orthophos with the following device components: generator D 3200 tube SR 90/15 FN 0.6 • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qualified technicians before placing into patient use.
Dornier Opus with the following device components: generator Hofmann Selector D tube Comet DI 97 HS-33/81-150 0.6/1.2 Image amplifier 40cm complete and in good technical and cosmetic condition • The system was tested before dismantling of our employees on site. • It is located in our warehouse in Germany, packaged on pallets properly lashed down and wrapped in stretchfoil and can be picked up immediately. • You buy the equipments in "as in" condition from stock Freiberg (EXW), Saxony, Germany, and prepayment. • We are a used medical device dealer. We do not service or refurbish any of the items that we sell. All items are sold used and in as-is condition, unless otherwise stated. We do not offer or imply any guarantees or warranties on any equipment sold. It is the responsibility of the buyer to ensure that all equipment is thoroughly inspected and refurbished by qu ...
used
Grinding length 500 mm Grinding width 250 mm Workpiece height 375 mm max. table load 350 kg Table longitudinal movement 525 mm Table feed 2-28 m/min Total power requirement 4.5 kW Machine weight approx.1900 kg Control NC Height: approx.2.60 m Width: approx. 2.10 m Depth: approx. 2.00 m Total weight with cooling lubricant container: approx. 2.3 t.
Continuous/normal drilling power (mm) R1 (gemes. Drehmom. Nm) 30/35 (in E3335/ST60) (135) R2 (gemes. Drehmom. Nm) 27/32 (in E335/ST60) (90) Thread cutting performance max. (slope-dependent) R1 M30x3.5 R2 M24x3 Spindle MK IV Drilling depth (mm) 160 Extension (mm) 300 Column diameter (mm) 140 Usable table area (W x D) (mm) 590 x 450 Speed display digital Drilling depth display digital Drilling depth stop with fine adjustment Table height adjustment with rack Spindle/table (mm) 150-700 Machine dimensions without VP (mm) 610 x 900 x 1,980 mm Machine dimensions with VP (mm) 670 x 1,100 x 2,200 mm Motor rotary current 400V with frequency inverter (kW) 4.0 Spindle speeds infinitely variable R1 (1-stage) 0-1000 rpm R2 (1-stage) 0-1600 rpm Feed by hand Weight (kg) 400 Optional (780 EUR) drilling package 5,beststretched from: Vice [felix] 125 Cone mandrel MK III/B ...
Table diameter 2,000 mm Max. Turning diameter 2,150 mm Turning height 1450 mm Table speed 3-140 rpm Max. weight of the workpiece 12000 kg Milling spindle: Maximum speed 2,000 rpm Milling spindle Motor power 22 kW Total weight of the machine approx. 34,000 kg Machine complete with: C-axis: 360,000° Milling spindle 22 KW Tool changer 16 positions Tool changer for milling tools ISO 50 16 positions Complete cladding Conveyor Complete cooling system with filtration
FREWITT GRANULATOR, MODEL OSCILLO WITT-3 Year of construction: 2017 Mobile oscillating and rotating sieve mill, for the gentle milling and deagglomeration of heat-sensitive and difficult-to-process products to a fineness of 250 µm. Particle size range: 5 cm - 250 µm Throughput: up to 600 kg/h Product density: up to 2 kg/dm³ Temperature range of product: from -20°C to +60°C Thanks to the continuously variable oscillatory or rotary motion, the constant uniform speed and force application, the product is milled with a very uniform grain-size and a low fraction of fines. DIMENSIONS Length: 1299 mm Width: 860 mm Height: 1417 mm ACCESSORIES INCLUDED 1 mobile HOVMAND drum lifting system (with battery) Sieves 1.00 x 0.63 mm 0.80 x 0.50 mm 2.00 x 1.00 mm 1.00 x 0.63 mm 0.315 x 0.20 mm 1.50 x 1.00 mm 6.00 x 1.50 mm 3.15 x 1.50 mm 0.80 x 0.50 mm ...
Oerlikon Leybold Trivac D 8 B with 0.37 KW AC-motor, 8 m3/h, final pressure:
Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW EW engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty
Oerlikon Leybold Rotary Vane Vacuum Pump Trivac D 16 B with 0.55 KW DS engine, 16 m3/h, final pressure: .1x10-4 mbar, completely overhauled with all wear parts, 1 year warranty
Leybold vacuum pump SV 100 B with 2.2 KW AC-motor, - 0.5 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty
Leybold SV 300 with 5.5 KW AC-motor, 300 m3/h, max. vacuum: x 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty
Oerlikon Leybold SV 300 B with 5.5 KW AC-motor, 300 m3/h, Final pressure: < - 0.08 mbar (without gas ballast), completely overhauled with all wearing parts, 1 year warranty
Oerlikon/Leybold roots vacuum pump WA/WAU 501 with 2.2 KW AC-motor, 500 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty
Oerlikon/Leybold roots vacuum pump WAU 1001 complete with 4.0 KW AC-motor, 1000 m3/h, max. vacuum: - 80 mbar, completely overhauled with all wearing parts, 1 year warranty
Optima Checkweigher Model: CC2 Serial: 1000388 Stainless steel checkweigher, weight range 0g -750g, 0.1g, total length 800mm, weigh platform 150mm x 120mm, pneumatic blow reject, 1Ph
Analog module, brand new, CPX-4AE-P-D10, 560362, Original Festo, new Special price ! Attention: Original Festo product, no replica from.. The parts were taken from a brand new valve assembly in its original packaging and are completely as new. We still have several identical and many other Festo components, but the quantity is ending. Buy more than 1 position there is still a great discount. If you have a UID number, we will gladly issue an invoice without VAT. 12 months warranty We give you 12 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the seller, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Aust ...
No 2 circular blades motors HP 3 - 2800 rpm No 5 drilling units motors HP 1 - 2800 rpm No 1 conveyor belt feeding machine HP 0,5 - 1400 rpm Pneumatic movements with hydraulic brake Stacking / Destacking device with pneumatic cylinders Electro-pneumatic machine control with PLC: Overall dimensions: -Length Mm: 2500 (useful for cutting and drilling) -Height Mm: 1400 -Width Mm: 1800
Laser sensor Error detection automatically Shape recognition Laser printer (DIN A4) Number 2 Monochrome cameras PHOTONFOCUS 160 MB Number 2 Barriers + Accessories
Electro-hydraulic Space requirement mm: 3000x1500 Lifting height max mm: 2000
A) Total grinding units: 02 - longitudinal - bottom Grinding units total: 02 - transverse - top - bottom B) Total grinding units: 02 oscillating - right C) Total grinding units: 02 oscillating - links D) Orbital grinding unit total: 02 Complete loading
Set-out moulds for production PCV gutter diameter 130 mm for rain water – 17 pcs. Moulds ( made by IFW Austria DERASCON ) (embrace pipe trigger A and B ; jointly ; Holders ;outlet ; Knee ; Corners ; bottoms gutter )
Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled
Rolls-Royce Olympus SPEED SIGNAL GENERATOR from the stock of the Army Navy Unused or overhauled
Engine Brand: OLYMPIAN, Conditie: USED, , https://www.hamofa.com/stock/generators/olympian-generac-156-kva-used/ 22387, , = More information =, , Type number: OLYMPIAN GENERAC 156 KVA
Dimensions mm: 3200 X 2200 Milling depth mm: 35 Total connection KW: 1.2
x-travel: 750 mm y-travel: 230 mm z-travel: 360 mm total power requirement: 5 kW weight of the machine ca.: 1.3 t required space: 1.65x1.3x2.1 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Material: PVC / Details: DC motor 70 kW, degassing, counter-runner, vacuum pump, screw diameter 88-151 mm (conical) Throughput: approx. 300 - 400 KG/hr.
QTY 1 x TMP (Division of French Oil, USA) Techni-Mix Lab Mixer, Model HD-5, Year of manufacture: 2014 (New), CE Marked, Mixing capacity: 5 Litre, 2 wing tangential rotors, Pneumatic hopper, Tilting body discharge (easy for cleaning), 20HP AC variable speed motor, Rotor rpm - Front 47.55rpm, Rear 39.28rpm. Complete with Electrical controls and in excellent condition.
Hollow-chamber plate system Material: PC, PP Extruder: Breyer Screw diameter: 120 mm, L/D: 33 Engine: 200 kW with degassing, Siemens "Simatic OP17" PLC control, vacuum station with water ring pump and condensate pots, sieve changer Gneuß SF75, melt pump Maag 56/56, calibrator OMIPA 2400 mm, 10-fold multi-roll extractor OMIPA, 2 roll extractor OMIPA, protective film laminating station, hot-knife longitudinal separation, OMIPA cross saw 2400 mm R
Cooling capacity 60 kW, Number of compressors: 1, Refrigeration circuit: 1 Cold water flow: 20°C Cold water return: 15°C at air inlet 42°C, Total water circulation: 12.7 m3/h Tank volume: 330 liters
This brand new machine is part of Caterpillars rebuild program, Ask us for more information., , Available in 50Hz - 400V , Prime rating 1.500 kVA, Standby rating 1.600, , Controls: EMCP4.2 / ADEM 3; Power [PS]: 1740; Gross weight [kg]: 14000; Engine: Caterpillar 3512B; Accessories: Battery, Control Panel
Longitudinal Splicer Manufactured by FISHER+RÜCKLE
WIPOTEC CHECKWEIGHER, MODEL OCS HC-A Year of construction: 2023 Ideal machine to ensure 100% control of production in compliance with the regulations on pre-packaged products. easy and tool-free conveyor replacement various statistical functions MACHINE CHARACTERISTICS Material: frame stainless steel V2A/AISI 304 Display: 15'' color TFT display with touchscreen PRODUCTION Max output: 600 pcs/min Temperature range: +5 to +40 °C Noise level: A-weighted emission sound pressure level under 70dB(A) ELECTRICAL CHARACTERISTICS Rated frequency: 50/60 Hz Connect load (power capacity): 0.8 kVA (ca) Compressed air supply (option): 6 bar (ca) DIMENSIONS Height: 1,591 mm (ca) Length: 440 mm (ca) Depth: 900 mm (depending on configuration) Weight: 250 kg
Code: 0063 Brand: MONGUZZI Model: TRA-OLM 2600 - CE Standard Automatic hydraulic veneer guillotine with 1 blade - CE Standard Technical data: Sturdy structure essential to guarantee a precise and quality cut Pressure and lowering speed of the presser and blade holder independently adjustable via hydraulic valves Cutting length mm 2650 Presser opening mm 80 Cutting execution time 4 sec Presser width mm 340 ideal for blocking any type of veneer Cutting display light Photocells and safety barriers Installed power Kw 10 Work surface height mm 930 Automatic numerically controlled rear register with programs Sliding on quality linear guides Side button panel for processing the end cutting side Rear safety nets Overall dimensions of assembled machine mm 4100 x 2450 x 1750 h Machine dimensions for transport mm 4100 x 1800 x 1750 h Weight kg 4000
Complete gate system Sagegatter mohringer oss71 with bv built in 1989 read through 710mm hub 500mm hydraulic sagespanner remote-gesteurchipwagen spe's round wood on givee rolengang with mechanicization
TECHNICAL DATA: Trimming Saw Ø max mm: 400 Tenoning spindle: 1 Ø max mm: 350 Profiling spindles: 2 Ø max mm: 240 Glass frame trimsaw Feedrate max/min: 2.5/15
RHENUS Automatic closure GO 733 Manufacturer: OPITZ Maschinentechnik GmbH Operating voltage: 3x400 volts AC Frequency 5 HZ Rated power: 1.6 kW Rated current: 2.9 amps Control voltage 1 24 DC VOLT Control voltage 2 24 AC VOLT Fuse: 16 A inertia Year of construction 2016 Negotiation price: € 2,500,-- net from stock P10280 Goods are in stock. Machine has already been dismantled. Transport and assembly possible on request. Viewing possible at any time by appointment. More information on request. More than 5000 linear metres of pallet racks from numerous manufacturers are constantly in stock. (Changes and errors in the technical data, specifications and prices as well as prior sale reserved! See our terms and conditions, all prices excl. VAT from stock.)
; Power [PS]: 36; Gross weight [kg]: 730; Engine: Perkins 1103A-33G1; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 71
; Power [PS]: 60; Gross weight [kg]: 769; Engine: Perkins 1103A-33TG2; Accessories: Tanker, Battery, Control Panel, Including : coolant heater and battery charger; Water Tank Volume [l]: 145
maximum number of results exceeded
please refine your search
