o h used for sale

Finishing unit, buffing unit, modular unit kit, format processing unit, double-end profiler, edge processing machine, after the scraper for edge processing machine -HOMAG finishing unit for cleaning agent application with buffing device for disposal of glue residue on PVC edges -with oscillation -Swiveling -side: adjustable -height: adjustable -Number: 4x units available -Price: per piece -Dimensions: 580/350/H460 mm -Weight: 28 kg

Car jack, jack stand, lifting jack, bottle jack, mechanical jack, axle jack -Handover: in the current condition as viewed -Handle: repaired, see photos -Manufacturer: Osaka, Mechanical Jack 50 ton -Stroke: 130 mm -Piston: Ø 87 mm -Number: 1x lifting jack available -Price: per piece -Dimensions: 270/220/H290 mm -Weight: 31 kg/piece

Profile scraper unit, profile scraper, flat scraper unit, finishing unit, modular unit, format processing unit, double-end tenoner, edge processing machine, scraper for edge processing machine -Manufacturer: OTT, profile scraper from edge banding machine type U206 -Quantity: 1 piece available -Dimensions: 460/430/H560 mm -Weight: 57 kg

PLC control, electronic module, interference filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter, noise filter -Manufacturer: Okaya, Noise Filter -Type: 3SUP-HL200-ER-6 -Voltage: 3x 500V 200A 50/60Hz -Dimensions: 480/200/H200 mm -Weight: 20 kg

electric magnetic plate, clamping plate, magnetic clamping plate, magnetic clamping plate, magnetic prism, magnetic prism -Magnetic prism: Magnetic measuring and clamping prism -Clamping surface: Length 74 mm -Prisms/Clamping surface: see photos -Magnet: can be switched on and off -Number: 2x magnetic prisms available -Price: per piece -Dimensions: 74/50/H55 mm -Weight: 1 kg/pc.

Pneumatic cylinders, air cylinders, standard cylinders, clamping cylinders, compact cylinders -Manufacturer: WEDA, Pneumatic cylinder compact cylinder with through piston rod -Type: WA-0605-50-P-OFS-DW -Stroke: 30 mm -Piston rod: Ø 16 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 124/52/H75 mm -Weight 0.5 kg/pc.

General SKU390X1024 MakeHuzap TypeOktabin inliner closing machine Mach.No.20-7547 Main Features MaterialMild steel Motor5.5 KW Specified Features - Miscellaneous Motor5,5 kW, 400 volt MaterialMild steel Information Year of construction2020 LocationBarneveld Floor space4,32 x 2,20 m Total height3,50 m Weight1700 kg CEcheck Extra SpecificationsThe machine is used to weld/heat-seal (close) plastic inliners (bags”) in octabin containers. It is a mobile (movable) welding/sealing fixture that clamps and tensions the inliner foil and then performs the sealing weld. Application: heat-sealing/welding octabin inliners (plastic bags) Design: mobile/movable welding fixture (clamping + tensioning + sealing) Seal beam: 2200 mm Compressed air: 3.5 bar Air consumption: ~10 Ndm³ per welding cycle Drive system: lifting/lowering frame via gearmotor (SEW SA67 DRN80M4, 0.75 kW, 40 ...

Manufacturer: Homag mit Verleimteil, Type: Optimat BOF / 40 / G , Year: 2000, Control: WoodWOP, Programmierplatz Büro: yes, Work piece width min-max mm: 1050/1200, Min.-max. workpiece length in mm: 4800, Min.-max. workpiece height in mm: 60/200, C axis: yes, Tool adaption system: HSK F63, Milling engine 1 hours power: 12, rpm 1): 1500 - 18000, Number of tool changers: 1, Number of tools per tool-magazine: 12, Mitfahrender Werkzeugwechsler: yes, Vertical drills-X: 11, Drill vertical Y: 7, Horizontal drills-X: 4, Aluminium sleeking table: yes, 2 station allocation: 2, Stops in the table front: 6 , Vacuum pumps m³/h: 120, Saw unit: yes, Edgebanding unit: no, Marking laser: Laserpositionerhilfe, Radial arm machine: yes, Foot mats: yes, Available: ca. 03/2017, Year :2000

: gebraucht : WA0168 : prompt, Zwischenverkauf v : 2800 € : 1 : 190 mm mint condition 3 divided, 1x3500 1x2000 1x1000 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: gebraucht : WA0137 : 1960 € : 1 : 3000 mm : 190 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Overview  The Octopus film winder was built in Finland in 2010. The machine was in use at a mineral water company until recently and is already dismantled and immediately available.   Technical details   Speed of the motion sequences  Ring up/down 0.15 m/s  Ring rotation 18 rpm  Film insertion 4.5 m/s  Film: LLDE pre-stretched  Hold-down device  Pallet dimensions   ¼ EURO,  ½ EURO,   EURO,   1200 × 1000,   Max. height 2400 mm,   Min. height approx. 50 cm depending on the system settings  Dimensions  Length 2850 mm   Width 2150 mm   Height 3140 mm   Weight 1050 kg   Voltage: 3 × 400 VAC 50 Hz +N+earth  Air pressure 6 bar, 9 l/operating cycle 

A very nive and well maintained Heideberg OHT , machine number 119 443, with serial equipment, mauals and numeratore in large format.

Running direction: left - right Frequency-controlled for 26 mm crown corks Also suitable for PET bottles with crown corks

General SKU011U240 MakeHanag AG Oberwil No.111094 Year of construction1995 LocationBarneveld Pressure Working pressure16 Bar Vacuum possiblecheck Working pressure jacket16 Bar Vacuum possible jacketcheck Number of vertical pressure tanks1 Main Features MaterialStainless steel Volume3560 Ltr. Pressure16 Bar Vacuumcheck Specified Features - Pressure vessel MaterialStainless steel 1.4435 (316L) Capacity3560 Ltr Vessel sizesdia. 1200x2600mm Dished topcheck Top connections4x dia. 80mm Outlet2x dia. 80mm + dia. 100mm + dia. 200mm Max. temperature-30/+120 Degr. C. Half coil jacketed(80 Ltr) Information Weight1900 KGDiscountPressure vesselsHanag OberwilDiscountTanks > Pressure vesselsBrand > Hanag Oberwil What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You ar ...

: gebraucht : WA0181 : prompt, Zwischenverkauf v : 1800 € : 1 : 3100 mm : 160 mm : 45 mm mint condition 86° Slightly cranked, planed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU028B135 MakeHanag Oberwil No.11940/4 Year of construction1993 Mounted on legscheck Specified Features - Stainless Steel Reactor Material finishPolished inside Pressure Working pressure3.2 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume1600 Ltr. Motor2.5 KW Stainless Steel Reactors Reactor(1x) Capacity1600 Ltr Vessel sizesdia. 1200 x 1296mm, Insulated vessel Dished bottomcheck Dished top sidecheck Manhole/hand hole dia. 200mm Top connections2x dia. 40mm + dia. 50mm Outletdia. 40mm With jacketcheck Max. temperature-10/+160 Degr. C. With paddle stirrercheck Motor2,5 kW (400 V, 1450 rpm) Speed mixing shaftvariable (± 19-150 Rpm) MaterialStainless steel 1.4435 (316L) Information LocationBarneveld With switchgearcheck Floorspace1,9 x 1,4 m Total height3,8 m Weight180 ...

: gebraucht : WA0145 : 840 € : 1 : 3100 mm : 40 mm : 115 mm slightly cranked The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU330N520 LocationBarneveld MakeGesellschaft fuer Oeltechnik mbH Waghäusel TypeE-302B No.106/1545/86 Material Shell materialStainless steel 1.4541 (321) Tube materialStainless steel Pressure Working pressure shell13 Bar Working pressure tubes13 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface11.1 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Heating surface11,1 m2 Tube capacity58 Ltr U-typecheck Number of tubes:31 Tube diameter16mm Tube length+/- (2x)3000mm Max. temperature-20 / 200 Degr.C Shell capacity100 Ltr Max. temperature-20 / 75 Degr.C. Shell connections(2x) dia.50mm, (2x) dia.25mm Cover connections(2x) dia.100.. Information Year of construction1986 Floorspace3,7x0,7 MCatalysts & fillersFeed additivesPaper & otherSolventsShell and tube heat exchangersDetergent & surf.Other ...

Premix plant for the production of highly and low carbonated beverages. The technical process steps are: degassing of water, carbonation of water, dosing of fruit juice in a partial stream into the carbonated water. Mixing takes place in the mixing section to the equalising tank. The water used is sterile-filtered in the inlet via two particle filters., Additional title: Intermix system with carbonisation unit, Water output: 22575 l/h, Fruit juice output: 4907 l/h, Operation / Control: Control panel, manual, Material: Lacquered mild steel frame, stainless steel product contacts, Position: Free standing, Base construction: Open frame construction with spherical feet, Features: Deaeration tank, impregnation tank, equalisation tank, CO2 dosage control, internal piping, pumps and fittings, control cabinet 2 trap filters for fine filtration of water in the inlet

Excellent condition - Fully operational - Loading / Transport possible! cutting length: 4300 mm cutting depth: 4250 mm Saw Blade Protection: 80 mm clamps piece: 6 (75 / 275 / 475 / 1050 / 1850 / 3450) piece Main saw blade: 350 mm Scoring Saw Blade: 180 mm saw carriage speed forward: 1 - 150 m/min saw carriage speed reverse: 150 m/min program fence speed forward: 90 (EU max 25) m/min Program Fence Speed Reverse: 90 m/min Air table: 4 x (2240 x 770 mm) Main motor: 13.5 kW scoring saw: 2.2 kW control: PLC software: CADMATIC 4.1 PROFESSIONAL total power approx: 20 KW

Machining center in vertical design with automatic return Workpiece dimensions: Length: 200 to 3050 mm Width: 50 to 1250 mm Thickness: 8 to 80 mm weight max 60 kg Performance - 2x vertical drilling unit separately controllable with variable speed. right left V10/32mm. 2.3 kW. Drill length 70 mm, D= max 35 mm - 2x horizontal drilling unit, 6 spindles in X direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - 2x horizontal drilling unit, 2 spindles in Y direction, variable speed. right left can be controlled separately. Drill length 70 mm, D= max 20 mm - Grooving saw unit X-Y can be swiveled 0?/90? saw diameter 125 mm, rpm 1500-7500 frequency controlled - Dowel insertion station for automatic insertion of dowels on the two transverse workpiece edges 1x left side / 1x right side glue pump, vibrating guide for dowels 8 x 35/40 mm - plau ...

Mobile lifting tipper, built in 2018 Good, used condition, ready for immediate use. If you are interested, we will be happy to send you a video link of the tipper in action Price € 5,500 net

Inv. číslo: 4465 Type: PL-140 LC Výrobce: OMC Vyrobeno: 2014 Parametry: Příkon: 75 kW

HOT PRESS MODEL PL 90s 3000x1300 mm PS VBO TECHNICAL CHARACTERISTICS Platens dimensions 3000x1300 mm Stroke 400 mm Type of stroke Upstroke design (from bottom to top) Type of platen Assembled platens with coil and aluminum covering Total thrust 90 ton on 80% of the surface Pressing Cylinders N° 6 cylinders ø70 mm Specific Pressure 2.05 kg/cm2 on 100% of the surface 2.56 kg/cm2 on 80% of the surface Loading and Unloading Side3000 mm side Type of Heating system Oil boiler ? maximum temperature = 120°C Heating system specificationsElectric boiler 18 kW Opening Automatic by timer Control Board Standard Power supply 400V, 50Hz, 3ph Security device Safety rope around the press Red emergency Button Two Hand control Norma ...

Optical dividing head, precision dividing head -Max. tip height: 76 mm -Max. center distance: 200 mm -with collets: 3, 4, 5, 6, 7, 8, 9, 10, 16 mm -wooden box -Total weight per box: 42 kg Quantity: 1 piece available

OMNIFLO overhead Hanging goods conveyor system driven curve aluminum RA2412 Manufacturer: Schöneberger Technical data: Inner radius: 800 mm Outer radius of drive: 1000 mm = 800 mm + 200 mm order drive Minimum length of leading straight section: 300 mm Minimum length of trailing straight section for motor: 600 mm Overall height: 110 mm profile height + Direction of rotation: right, left curves optional Drive type: chain with brushes Conveyor speed: 0.16 m/s Electrical data: Voltage: 3x 380V high voltage Ampere: 1.75 A Power: 0.55 kW Installation: Ceiling suspension with motor support recommended, as shown in the photos Primarily intended for flat transportation. Slight inclines may be possible depending on the length and weight of the trolley convoy Optionally available: Ceiling suspension Angle adjustment Change of direction of rotation (left-hand curve) Extensions with straight section ...

2025 BIG backhoe bucket 50cm with OQ45 attachment, Technical specifications:, - Weight: 178 kg, - Recording width: 50 cm, - Contents: 198 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

2025 BIG backhoe bucket 70cm with OQ45 attachment, Technical specifications:, - Weight: 215kg, - Recording width: 70 cm, - Contents: 293 liters, - CAT 5 - suitable for 5.6 - 9 t excavators

Belts - oil separators Oil separator with KUNSTSTOFFGURT OPV - 1 / OPV - 2 This group of oil separators is recommended for industrial applications. The collection in the standard version is made of plastic without connecting traces, which is adapted to the requirements, e.g. polymer, elastomer, etc. All parameters such as performance, bandwidth, and so on are selected individually. An oil lifting height of up to 15 m is particularly useful in deep tanks, e.g. sewage treatment plants. The number after the marking (300/500/700/1000 mm) is the working length of the strip - depth from the mounting base. Complete oil separator with PU polyurethane tape. Belt color: green (standard), blue or white. Maximum liquid temperature up to 60°C. We have oil separators with a stainless steel belt INOX with a working temperature of up to 100 ° C at an additional cost. Maximum liquid temperature ...

The oil separator is used to collect oil floating on the surface. It is used wherever there is little working space and fluids must be moved and de-oiled in different places. It is a lightweight, compact portable device that is mounted on the wall of the in which the liquid to be cleaned is located. Thanks to this, it is possible to develop various technological active ingredients in de-oiled in different places. The device is designed for continuous operation. The disc is made of self-adhesive plastic, on which oil and carbohydrates, but water does not. Maximum liquid temperature up to 60 ° C - standard band. Maximum motor and housing temperature up to 40°C. Avoid mounting places with aggressive pH - additional motor protection required. With the OTV-300, you should take a 15-minute break every 3 hours. If the motor does not overheat, it can work longer. Continuous opera ...

AUTOMATIC CUTTING SAW machine for solid wood model OMEC TA 185 second hand machine working conditions : Excellent CE mark : YES Instruction Book : YES with rollers tracks ( as in photo ) n.03 pneumatic stop with blade diam.mm.550 motor power Hp 7,5 volt. 380/50

Nominal Rating 1000 l/h; prepared - top condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 600 l/h power heating heater / oil boiler 55 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm weight 330 / 430 kg Oil consumption 6 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 1000 l/h power heating heater / oil boiler 90 kW Electrical power 1.1 kW Electrical connection 230V 50Hz (1 phase) Electrical fuse 16 A Laenge 1400 mm width 900 mm Height 1850 mm Weight 350 / 430 kg Oil consumption 10 kg/hr ; New machine - best condition

Pasteurizing system with Roehrenwaerme exchanger nominal power l/h 2000 l/h power heating heater / oil boiler 180 kW Electrical power 1.8 kW Electrical connection 230V 5 0Hz (1 phase) Electrical fuse 16 A Laenge 1715 mm width 900 mm He 1900 mm Weight 492 / 600 kg Oil consumption 19 kg/hr ; New machine - best condition

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Ladies and gentlemen, we have various transformers for sale services of 630KVA to 3500kva Voltage 10KV 15Kv 20KV 22kv, 30kv 33KV immediately available and nationwide available TEL. 01727265324

Vulcatherm Infra Red Oven 250degC max temp with control ID 320x130x2000mm

Many thanks for your interest on our second hand machines, please find follow our offer: manufacturer: OKA Type: TBA Depositor working width: 450 mm different: wire cutter moveable on rolls workingtable folding I offer this machine in as-is where it is condition ex warehouse Hessisch Lichtenau, unpacked

Cake slicer, Ostali, TPS 520

Key data: 500 mm, 160 mm

Optimisation cross-cut saw OptiCut S 90 Speed - Left-hand version Max. wood entrance length 7.2 m Wood dimensions to be processed Sawing unit for large wood cross-sections with saw blade diameter Ø 500 mm Saw blade made of tungsten carbide, Z=144, WZ 20° Saw Blade Drilling 30 mm Saw blade speed max. 3600 rpm. Input lengths min./max. Widths min./max. Thicknesses/thicknesses min./max. Nominal cross-sections (without board curvature) Min. 500 - 7200 mm 23 - 160 mm 12 - 100 mm 23 x 12 mm .max. 160 x 100 mm Package size at max.9 strips per package Packet Ratio Width and Length to Thickness 160x100 mm 2:1 Fixed length min. 60 mm Performance / Positioning Moving speed of the positioning slide infinitely variable max. approx. 240 m/min. Cutting time / cutting height Adjustable The practical daily output depends to a large extent on the production  ...

TO WHOM IT MAY CONCERN ; WE VE GEA WESTFALIA OIL SEPARATORS OSD 6 WITH BELOW EQUIPMENTS AT OUR STOCK PLS FIND DETAILS ON BELOW --TYPE OSD6 - 91 - 067 / 3 & OSD -91-067 / 6 YOB 2006 SERIAL NO 9037-463 & 9038 - 150 BOWL SPEED 12000 VOLT 380VOLT FREQUIENCY 50Hz --ELWA HEATER TYPE 5609-V kW 12 BAR 6 -- TRANSFER FEED PUMPS --CONTROL PANELS EX STOCK READY TO DELIVER. IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST Regards ; Aliaga Marine Services E mail: info/aliagamarine.com Phn/Fax:+90 232 618 03 90 Mobile: +905556084850 aliagamarine.com TURKEY

Technical data Manufacturer: Otto Schröder Stroke: 160mm hand adjustable Distance between the stand: 800mm Pass: 250mm Support table: 800mm, with 4 grooves subcircle of 400mm groove dimension 25x75mm Bore: table center of 70mm Table height: 835mm Dimensions: LxWxH 110x900x2200mm

OIL PRESS 90 KW, Ã?LPRESSE 160 KW, WÃ?RMEPFANNE W255/7-1, LOOS DAMPFKESSEL 500 KG/H, ELEVATORE, LAGERSILOS, Ã?LTANK 20000 LITER, ETC. tel. +49 1715213204

Complete Log Cut-off Saw Manufactured by Raute

Devillbis Oxigene case. Beauty care and breathing oxigene suply.

Automatic optimization crosscut saw: Technical data: Follow later!

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...

Replacement columns for aluminium die-casting machine OL2000, D285x10, Oleopress, new -50% Special price! Attention: The current new price is certainly twice as high. In addition, we also have a spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely new and in ist original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 285 x 10mm, L 6830mm Weight approx. 3400 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

Convotherm Combi oven Model: OES 6.10 Stainless oven, digital control system, internal dimensions 600mm x 450mm x 500mm, 3Ph