o h used for sale

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 145.346 include HAKRO Hotfoil unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Out-of-the-box recovery connections can be created with the HPE 1950 Switch Series using the Spanning Tree Protocol, Rapid Spanning Tree Protocol, and Multiple Spanning Tree Protocol standards. Key connections are distributed across multiple units in a logical stack for greater resiliency. Sold as a complete package with the following components: 1x HPE Office Connect 1950 JG961A 24-Port (PoE) 2x HPE Office Connect 1950 JG962A 48 port (no PoE) 13x HPE Office Connect 1950 JG963A 48-port (PoE) 10x HP A-RPS1600 JG136A Power Supply

Hohner Orion 4 wire stitching machine; cleaned and tested; 3 stitching heads 70/20 with coarse tool; Max. Staple thickness 20mm; Clamp spacing 70-550mm; Table size 1000x330mm. Wire stitcher Hohner Orion 4; cleaned and checked; three stitching heads 70/20 with tool rough; max.thikness 20mm; distance between heads 70-550mm; table size 1000x330mm.

1955 A4 Size Standard machine Machine no.: 107297N Located: Germany Available: immediately

Open Spray Stand 2x2,1x2,2 The overspray during powdering is absorbed by the extraction unit. The powder spray stand is delivered on rollers and is therefore mobile. - The extraction system is equipped with a 60 L powder container (rollable). - As a 1st stage, there are 4 filters in the extractor. - Above the cab is the absolute filter. 1. Dimensions of the powder stand width 2,000 mm Depth 2,100 mm Height 2,200 mm 2. Fan 1 pc. 6,000 m³/h Electric motor 3.0 kW 3. Filter Φ 325x600 4 pcs Type Filter Cartridges 4. Electromagnetic valves 2 pcs. 1" "Turbo" Italy 5. Absolute filter 1 pc. type bag filter

Powder curing furnace 2,000 x 1,900 x 2,000 mm 1 Inner dimension length 2,000 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 5,700 m³/h 10 electric motors 1 pc 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 33 kW = 28,380 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 100mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is operated with gas burner 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 58 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air pipe, manual flap ...

Powder curing furnace 3,500 x 1,900 x 2,000 mm gas operation 1 Inner dimension length 3,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 1 pc. 7,500 m³/h 10 electric motors 1 pc 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal output 58 kW = 49,880 kcal/hour 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set of stainless steel INOX with heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc. stove is heated by gas burner. 15 Exhaust air 1 pc device for exhaust air pipe, m ...

Powder curing furnace 4,500 x 1,900 x 2,000 mm electric 1 Inner dimension length 4,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 5,700 = 11,400 m³/h 10 electric motors 2 pcs 2x 2.2 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 74 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device for exhaust air ...

Powder furnace el. or gas Powder curing furnace 6,500 x 1,900 x 2,000 mm 1 Inner dimension length 6,500 mm 2 Inner dimensions width 1,900 mm 3 Internal dimensions height 2,000 mm 4 Substructure 1 set of steel profile 5 walls 1 set of galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling 1 set of rock wool 150mm 75Kg/m² 7 Bottom furnace gets 2 entry rails for tray wagons 8 Temperature 220°C 9 fans 2 pcs. 2x 7,500 = 15,000 m³/h 10 electric motors 2 pcs 2x 3 kW , 1450 rpm, 3 F, 50 Hz 11 Thermal power 110 kW 12 hinged doors on one side 2 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock 1 set stainless steel INOX AISI 316 heater electric heat-resistant fans and heat-resistant bearings, thermoblock has overheating protection 14 burners 1 pc stove is electrically heated 15 Exhaust air 1 pc device fo ...

Powder curing furnaces in various sizes, gas or electric 1 Inner dimension length 1500 - 6,500 [mm] 2 Inner dimensions width 1700 - 1,900 [mm] 3 Inner dimensions height 2,000 [mm] 4 Steel profile substructure 5 walls Galvanized sheets 1mm on both sides, RAL on the outside 6 Insulation walls, ceiling rock wool 150mm 75Kg/m² 7 Floor furnace gets 2 entry rails for tray trolleys (optionally with conveyor technology) 8 Temperature 220°C 9 fans 1 - 2 pcs. 2600 - 15,000 [m³/h] 10 electric motors 1 - 2 pcs 1.1 - 6 [kW] , 1450 [rpm], 3 F, 50 [Hz] 11 Thermal power 14 - 99 [kW] 12 hinged or sliding doors on one or both sides 2 - 4 pcs insulated with rock wool 150mm 75Kg/m² Heating Indirectly via Thermoblock 13 Thermoblock Stainless Steel INOX AISI 316 Heating Electric or Gas Heat-Resistant Fans and Heat-Resistant Bearings, Thermoblock Has Overheating Protection

liter capacity: 90 l/min tank contens: 100 l voltage: 220 / 380 V tank dimensions ca.: 800 x 380 x 400 mm height with motor ca.: 900 mm power capacity: 2,2 kW weight: 57 kg Condition: unchecked: Base: 820 x 390 x 650 mm The capacity liter is estimated because on the type of the motor is model KMR 90 L 4. Machine dealer with own stock of 1600 m². The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Oven, doors single-sided, electric Dimensions: 3,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 54 kW Auxiliary heating: electrically indirect via thermoblock

Oven, doors single-sided, gas Dimensions: 4,500 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Recirculating air: Q = 12000 m³/h P = 2 x 2.2 kW Heat output: 69 kW Auxiliary heating: Gas indirectly via thermoblock

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Oven, doors single-sided, electric Dimensions: 3,000 x 1,700 x 2,000 [mm] (alternatively width 1900mm instead of 1700mm) Insulation: 150 mm (mineral wool 75 kg/m³) Temperature: max. 220°C Circulating air: Q = 7500 m³/h P = 3 kW Heat output: 46 kW Auxiliary heating: electrically indirect via thermoblock

Open Powder Spray Stand Dimensions: 2500 x 2250 x 2700 [mm] Extraction capacity: Q = 8000 m³/h P = 5.5 kW Filter: 1 stage: Filter cartridges 4 pieces à Ø 325 x 1000 [mm] 2nd stage: Pocket filter (absolute filter for fine dust) Note: The overspray during powdering is absorbed by the suction unit. The powder spray stand is delivered on rollers and is therefore mobile

Forklift battery charger, industrial charger, forklift battery charger, industrial charger, Si rectifier -Manufacturer: Oldham, charger type High Power III 36-80 -Input voltage: 220/380V 50Hz -Power: 36 V / 80 A -Dimensions: 555/410/H790 mm -Weight: 66 kg

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1966 - Serial-No. 155017 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1962 - Serial-No. 137806 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

colour units: 1 max. printing speed sheets: 5500 /h max. paper size: 26 x 38 cm serial no.: 194.443 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1974 - Serial-No. 186 403 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1964 - Serial-No. 149218 N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Buchdrucktiegel - Stanztiegel / Letter Press Tiegel - DIE Cutter Heidelberg OHT Year 1957 - Serial-No. 120523N Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Komplett mit Zubehör und Schließrahmen / Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Letter Press Tiegel - DIE Cutter Size min.: 40 x 70mm - max. 260 x 380mm Speed min.: 2.200 sph - max. 5.500 sph Standard chase: 260 x 340mm Skeleton chase: 260 x 350mm Complete with tools and accessories include frame Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Schließrahmen - Frame OHT Letter Press Heidelberg OHT A4 -24 Frame OHT Tiegel -8 Frame KS Cylinder -1 Frame KSB Cylinder -2 Frame S Cylinder -4 Frame SBG Cylinder -1 Frame Adast GP Tiegel Online-Video-Inspection by Skype-Video We would be very pleased with your visit - more machines on Stock Available Immediately - Can be inspect On Stock Emskirchen / Nürnberg - Can be test

Frequency converter, frequency converter, drive converter, controller, variable speed drive -Input: 380 V 6.5 kW -Output: 220 V 200 Hz -Power: 6.5 kW -for edge banding edge banding machine -Dimensions: 330/650/H270 mm -Weight: 105 kg

Panel sizing saw with lift table loading HOLZMA type OPTIMAT HPL 380/43/22/L Specifications: • Saw blade protrusion (mm): 95 • Saw carriage feed forward (m/min.): 5 - 130 • Saw carriage feed backwards constant (m/min.): 130 • Program slider speed forward (m/min.): 80 • Reverse program slide speed (m/min.): 80 • In EU countries, a maximum forward speed of 25 m/min is prescribed. • Angular pressure device min. pressure width (mm): 0 • Angular pressure device max. pressure width: complete cutting length • Main saw motor (kW): 13.5 • Scoring saw motor (kW): 2.2 • Collet opening max. (mm): 100 • Working height (mm): 920 • Cutting length (mm): 4300 • Collets: 7 pieces, of which the first 3 pieces are two-fingered, all others are single-fingered • Pitch: 75/275/475/1050/1850/2650/3450 mm measured from angle ruler to center collet Lift table: ...

OKUMA HOWA Type ACT 4 CNC control Fanuc 10 TF Turning diameter 380 mm Circulation over bed 520 mm Turning length 750 mm Revolver 12 speed Spindle speeds 20 - 3500 rpm Fodder Tailstock Spindle bore 75 mm Feed adjustment by foot switch CAM connector

Strip cylinder HÖBRIGER-ORIGA Ø 40 x 500 stroke series 120

Liquid filter ORSTA AC 40/1-25 TGL 21541 ND 250 bar New ! Dimensions: 400 x 170 x 165 mm

Liquid filter ORSTA ACC 40/1-25 TGL 21541 ND 25 bar New ! Dimensions: 400 x 160 x 170 mm

Liquid filter ORSTA AC 16/1-63 TGL 21541 ND 25 bar New ! Dimensions: 200 x 120 x 100 mm

Liquid filter, return filter, without maintenance indicator ORSTA BCC 16/1-25 ( BCC 16/1-25 ) TGL 21541 ND: 10 bar (1.0 MPa) for tank installation without rubber seal! New ! Dimensions: 205 x 145 x 105 mm

Liquid filter ORSTA BCC 10/1-25 TGL 21541 ND 10 bar New ! Dimensions: 160 x 140 x 100 mm

Liquid filter ORSTA ACB 16/1-10 TGL 21541 ND 25 bar with electric clogging indicator TGL 15687 New ! Dimensions: 200 x 120 x 120 mm

Liquid filter ORSTA BCD 10/1-25 TGL 21541 ND 10 bar with electric clogging indicator New ! Dimensions: 190 x 150 x 100 mm

Liquid filter ORSTA BCA 32/1-25 TGL 21541 ND 10 bar New ! Dimensions: 390 x 210 x 200 mm

Liquid filter ORSTA, FILTERBAU DESSAU ACC 20 x 25 TGL 21541 ND 25 bar New ! Dimensions: 210 x 145 x 120 mm

Liquid filter, with mechanical maintenance indicator ORSTA, FILTERBAU DESSAU BC25x63A TGL 21541 ND 10 bar New ! Dimensions: 290 x 160 x 150 mm

Liquid filter ORSTA, FILTERBAU DESSAU BCC20x63 TGL 21541 ND 10 bar New ! Dimensions: 230 x 160 x 150 mm

Throttle valve, hydraulic valve ORSTA 10/2/11 TGL 26243 / 30 Pn 32 MPa without key Dimensions: 130 x 75 x 45 mm

Throttle valve, hydraulic valve ORSTA 10.2.11 TGL 26243 / 30 Pn 32 MPa with key Dimensions: 130 x 75 x 45 mm

Globe valve, hydraulic valve ORSTA TGL 21575 Nominal pressure: 16 MPa (160Bar) Nominal diameter: 10 mm Dimensions: 80 x 60 x 45 mm

Shut-off valve, hydraulic valve ORSTA TGL 21575 nominal pressure: 16 MPa (160 bar) nominal diameter: 13 mm square: 9 x 9 mm New ! Dimensions: 75 x 40 x 55 mm

Shut-off valve, hydraulic valve ORSTA TGL 21575 Nominal pressure: 32 MPa nominal diameter: 10 mm Dimensions: 80 x 60 x 45 mm

Throttle valve, hydraulic valve ORSTA 16 - 2 .01 TGL 26243/30 Rv Nominal pressure: 16 MPa Dimensions: 155 x 150 x 45 mm

Throttle valve, hydraulic valve, for pipeline installation ORSTA 12-2.01 TGL 26243 / 30 Nominal pressure: 16 MPa ( 160 bar) Actuator: Actuator with lock nut, sealable ! New ! Dimensions: 130 x 107 x 35 mm

Throttle valve, hydraulic valve ORSTA 16 - 1. 01 / 0 TGL 26243/30 Rv Nominal pressure: 16 MPa used, tested ! Dimensions: 155 x 150 x 45 mm