131,091 used machines on RESALE, but how to find them? Machine Search
Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)
Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use
Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.
Carrier Doka H20 Top P The carriers are manufactured by Doka 8.415m - available lengths: 2.45m 2.65m 2.90m 3.90m € 3.85 per meter Formwork carriers as a well-used com-po nen ten for vie-le-relungs-sys-me. Formwork carriers are available as ba sis vie'ler Scha-lungs-sys-te-me and uni-ver-sell. The carefully used carriers are suitable for the years of the construction. The location is our warehouse in 5202 Neumarkt For further information or a visit I am at your disposal at any time. You can reach us at Tel.Nr: +43 664 1296830 or by e-mail: office@berger-international.at Berger Construction Equipment Ltd.
TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools
-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)
Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t
TECHNICAL DATA: Complete production line for Blockhaus processing consisting of 02 machines: Hundegger joinery machine model K3 and special Friulmac system model Idramat SQ The combination of the two machines allows the realization in a continuous cycle of: Bungalows Garden sheds Temporary houses Small houses Tourist accommodations Emergency accommodation
Laboratory processing plant UNIMIX Manufacturer: Haagen & Rinau Factory no.: 865 3779 Built: 1979 Permissible operating overpressure: container: 4 bar, tube side: 6 bar Total content: 5.5 l Usable volume: 3 l with speed-controlled agitator with speed-controlled homogenizer integrated heating Vertical stroke (water hydraulics) with temperature regulatioin with control system LWH: 750 x 360 x 850 mm
Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm
New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT
High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: approx. L 1800 mm x W 1100 mm x H 900 mm Empty weight: 1500 kg Flow rate: 14.5 m3/h Technical documentation: no Message: piston: 57mm, stroke rate: 326 min
Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry
High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm
4 adjustable spindles, pedal operation, drilling range 3-14mm, ...
6 adjustable spindles, pedal operation, drilling range 3-14mm, ...
Machine type Pulse-Arc-Inverter-Welding system Make MERKLE Type HighPULSE 284 K Connection voltage 3 x 400 volts Adjustment range 25 - 280 amperes Switch-on time 35% ED at 280 amperes 100% ED at 200 amperes Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version of portable assembly line Wire feed 4-wheel drive DV 26 Fuse 16 Ampere Dimensions L x W x H 600 x 300 x 565 mm Special accessories Connection for water cooling Weight 33 kg Age 6 months Condition workshop-tested, very good, incl. UVV test protocol Scope of delivery Welding system with the following accessories: 1 piece welding torch SBT 307, 3 mtr. Long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll of welding wire 0.8 mm, D-300, 5 kg 1 pair of welder gloves with cuff 1 piece spare p ...
M. No.: 664937N // Counter (m): 42 Format (cm): 32x46 Dampening: Varn Kompac III Equipment / Additional information: with N&P (numbering & perforating) unit
Storage number: 3552 CNC ROTARY TABLE Manufacturer: HOFMANN, Type: RW-NC 220 Machines NR.: 02368 30JO2, built: 2009 Specifications: Table size 220 mm Center Height 220 Partial 0.001 Degree Control SIemens 840D Hori/Vertical Accessories: Riding stock - manual Length: 600 mm, Height: 800 mm, Width: 400 mm, Weight: 200 kg
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD 330kWe Serial number 80371/01 Stamford generator HC1534C2 400V/50Hz, 500 KVa 721 Amp year 2005 Serial number C145320 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GLD Serial number 60468/01 Stamford generator HC1534E2 400V/50Hz, 600 KVa 866 Amp year 1996 Serial number C72199/04 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
Gas Engine Generator Set (CHP/BHKW) Waukesha for natural gas Model H24GL Spec number 80012 Serial number 401853 Scope of delivery: - Generator set - Control panel - Gasline section as displayed - Exhaust gas cooler as displayed
The press brake HAMMERLE BM 200-3100 press brake was built in 1996. The folding machine was serviced regularly. Technical parameters of the press: - control: INFINITRON - number of NC axes: 11 - pressure: 200 tons - bending length: 3100 mm - working stroke: 400 mm - distance between the body walls: 3240 mm - maximum distance between the table and the bumper: 965 mm - voltage: 3 x 400 Volt - control voltage: 24 V = - total power: 28 kW - deflection arrow compensation - total machine width: 4400 mm - total height of the press: 3400 mm - weight of the press: 16 600 kg
Completely overhauled HSB 15 incl. certified oil pan and protective fence for a quick and Trouble-free commissioning. Overhauled in 2021 Optional new 8m3 bunker and conveyor screw available. Including. Used machine warranty
Replacement welding controllers 19" for resistance welding machines MPS 100mono MPS 100monoR1 MPS 100multi MPS 100multiR1
Replacement welding controllers 19" for resistance welding machines MPS 8043/1 MPS 8043 Q
Plate Scanner Machine No.: 34373 Size: max. 102cm Plate Scanner/Plate Reader for Heidelberg Speedmaster SM 102/SM 74, SM 52, Plate Image reader, for measuring the printing part of the surface of offset plates and stores the measured values on the job memory card or in the CPC data memory, for on-line transfer of the values to the press's control unit (for calculation of ink fountain zone openings and ink stripe widths in CPC 1 control unit), for all types of printing plates up to SM 102 format plates
Gluing machine Hunkeler LAM 500; good condition; cleaned and tested; Working width 500mm; Cold glue; Hot glue is prepared, can be retrofitted. Gluing machine Hunkeler LAM 500; good condition; cleaned and checked; working width 500mm; used for cold glue; option for hot glue installed.
Prallbrecher Prallmühle Steinbrecher Einwellenshredder used Manufacturer: HAZEMAG / KLEEMANNs Type: WMS 800/1 Rotor diameter: approx. 800 mm without a fallback mechanism Filling shaft approx. 800 x 600 mm Ejection shaft approx. 1200 x 800 mm Dimensions without motor: approx. 2600 x 2300 x 2300 mm The drive succeeds via V-belts and can be individually adapted to the requirements.
250 ton x 3000mm 3100mm ben length 3200mm between frames MASSIVE tooling package Bend aid and voice control!
Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9
Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9
Rotor width: approx. 300 mm Rotor diameter: approx. 300 mm Stator knife: 6 Rotor blade: 9
For sale: Endress Hauser Flowmeter PROMASS 63F DN15 Order number: 8000.6 For more information, please call or send an email. Phone: 06-20758459 Email: wh.derikx@gmail.com The price is plus 21% VAT.
maximum number of results exceeded
please refine your search
