130,800 used machines on RESALE, but how to find them? Machine Search
Our Pfeiffer Vacuum HiPace 2300 is after the general overhaul: absolutely new checked according to manufacturer specifications, so all games and dimensions are in the tolerances equipped with new wear parts available at short notice includes one year warranty Our Pfeiffer Vacuum HiPace 2300 wants: be as good as new be checked after the manufacturer's specifications, for example its tolerances be fitted with new wear parts be available at short notice included one-year warranty
Hydraulic excavator chain excavator crawler excavator Manufacturer: Hyundai Type: ROBEX 280 LC Built ca.1999 6 cylinder four-stroke diesel engine Engine model: Cummins 6BT 5.9 / 128 hp Chassis length approx.: 4900 mm Cab height approx.: 3000 mm Chassis width: 3400 mm extra width quarry bog chain, chain width approx.: 810 mm Weight about 30 tons. Deep Spoon Oscar Meier AG Type ASM 100 Pinion repaired from the rotary gearbox and seals of rotary entry.
Cutting mill Manufacturer: NEUE HERBOLD Built: 2001 Drive: 7.5 kW for the grinding of foils: optional with roller feeder type EB 290 (drive 0.75 kW)
Conveyor belt / belt conveyor Belt width: approx. 300 mm Axle distance: approx. 3,130 mm Drive: 0.75 kW new - only very short in use
Chain rubber belt conveyor, feed belt for recyclables, conveyor belt, conveyor belt, flat belt used HÖMA GmbH KGF 1200 Built in 1995 Length approx. 2.5 m Width band approx. 1150 mm Chain rubber belt Construction width approx. 1600 mm Gearmotor 1.5 kW Total dimensions: approx. 2500 x 1600 x 1100 mm The tape was used in the recycling industry and was used to feed paper and cardboard for a baling press.
Carrier Doka H20 Top P The carriers are manufactured by Doka 8.415m - available lengths: 2.45m 2.65m 2.90m 3.90m € 3.85 per meter Formwork carriers as a well-used com-po nen ten for vie-le-relungs-sys-me. Formwork carriers are available as ba sis vie'ler Scha-lungs-sys-te-me and uni-ver-sell. The carefully used carriers are suitable for the years of the construction. The location is our warehouse in 5202 Neumarkt For further information or a visit I am at your disposal at any time. You can reach us at Tel.Nr: +43 664 1296830 or by e-mail: office@berger-international.at Berger Construction Equipment Ltd.
TWO SPINDLE BORING MACHINE Sr. No.: 71179 Equipment / Additional information: Tools
-PREPARATION AND PRODUCTION OF PRODUCTS -TRADE AND SALE OF PRODUCTS (NEW AND USED) -THE USE OF A COMPANY (JE AFTER AVAILABILITY)
Crank press HECKERT PKZ 400.1 built in 1980. Technical data : - maximum pressing force: 400 t - working path - lower position of the slider to the maximum pressing force: 21 mm - maximum drawing depth: 125 mm - pressing force using the maximum drawing depth: 160 Mp - idle speed of the slider: 18 min-1 - maximum number of switchings: 9 min-1 - ram stroke (min-max): 315 mm - slider adjustment: 200 mm - holding force of the drawing device at air pressure: 63 Mp, 5 kp / cm2 - force of the drawing device ejector at air pressure: 10 MP, 7 kp / cm2 - total weight: 38.5 t
TECHNICAL DATA: Complete production line for Blockhaus processing consisting of 02 machines: Hundegger joinery machine model K3 and special Friulmac system model Idramat SQ The combination of the two machines allows the realization in a continuous cycle of: Bungalows Garden sheds Temporary houses Small houses Tourist accommodations Emergency accommodation
Laboratory processing plant UNIMIX Manufacturer: Haagen & Rinau Factory no.: 865 3779 Built: 1979 Permissible operating overpressure: container: 4 bar, tube side: 6 bar Total content: 5.5 l Usable volume: 3 l with speed-controlled agitator with speed-controlled homogenizer integrated heating Vertical stroke (water hydraulics) with temperature regulatioin with control system LWH: 750 x 360 x 850 mm
Pump Manufacturer: Lowara (Italy) Type: HTS 32-125 N°: 90 Power: 3 kW Flow rate: 12-33 m3/h at 26-18.8 m height (water) LWH: 600 x 300 x 360 mm
New drive shafts for Vertical and Universal Fraeshead FU 400 - FW 400 HECKERT Germany Price 900,-- Euro per square plus VAT
High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: approx. L 1800 mm x W 1100 mm x H 900 mm Empty weight: 1500 kg Flow rate: 14.5 m3/h Technical documentation: no Message: piston: 57mm, stroke rate: 326 min
Haas TRO 140G Price: 110,000 € Machine No: 18767 Built: Number of baking tongs 140 , 2 baking places per pliers Upper engraving without Underengraving 5 x 5 mm Rand yes Tool 22°30' Power consumption: approx. 2.5 kw/h Gas consumption: approx. 24 m3/h Location: Germany The machine is used for the production of sweet, twisted squirrels with standard industrial size and flattop. Winders, conveyor belt, ready-to-wearer, metal detector and stacking table are included. The machine is in a well-maintained condition. The machine is currently stored. Haas, GAM, Steinhoff, Walter, Industry
High Pressure Pump Material: regular steel Driving force: 55 kW Dimensions: aaprox. L 1600 mm x W 1000 mm x H 900 mm Empty weight: approx. 1500 kg Flow rate: 14.4 m3/h Operating pressure: 100 bar Technical documentation: no Message: piston: 57mm, stroke rate: 326 rpm, stroke: 105mm
4 adjustable spindles, pedal operation, drilling range 3-14mm, ...
6 adjustable spindles, pedal operation, drilling range 3-14mm, ...
maximum number of results exceeded
please refine your search
