numerically controlled machining used for sale

Attention: the machine can be transported on a truck up to 3000 mm width! Additional technical specifications: • Feed rate in X/Y/Z: 20 - 15,000 mm/min • Setup mode X/Y/Z: 20 - 2000 mm/min • with in total 32-station tool changer (2 x 16 places) • max. tool diameter when all slots in magazine 1 are occupied: 130 mm • max. tool diameter when all slots in magazine 2 are occupied: 80 mm • max. tool length from spindle nose: 315 mm • max. tool weight at automatic tool changing: 8 kg • max. total tool weight in magazine: 160 kg • T-slot spacing: 63 mm

Year of construction: 2011 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat compe ...

Controlled Axes 4 axes (X, Y, Z, and electrospindle continuous rotation A-axis) Axis Strokes X-axis (Longitudinal): 7,700 mm Y-axis (Cross): 270 mm Z-axis (Vertical): 420 mm A-Axis Travel 0° to 180° continuous rotation (allows machining on 3 sides directly, up to 5 sides with angular units) Working Modes Single-piece (up to 7.7 m), multi-piece, and pendular/dynamic pendular (two independent work zones) Electrospindle Power 7.0 kW (S1 continuous duty) Spindle Speed Up to 16,500 RPM Tool Holder / Cone HSK-50F Tool Magazine 8-slot automatic tool changer mounted directly on the X-axis carriage Tool Compatibility Accommodates milling bits, 1 angular unit, and saw/disc blades up to Ø 180 mm

Key data: 1600 mm, 1250 mm, 1000 mm

Vertical machining center Manufacturer: DMG Type: DMU 160 P duoBLOCK Year of Make: 2007 Control: Heidenhain ITNC 530 Axes: 5-axis simultaneous Travels X: 1600 mm Y: 1250 mm Z: 1000 mm Tool changer: 60 tool positions Speed: 18,000 rpm - HSK 63 - Probes - Tool measurement Blum Laser - Coolant tank 980 litres - IKZ 40 Bar - Chip conveyors - Electronic handwheel - Operating mode 4 - Preparation of 3-D Quickset (software) - Universal milling head with controlled A-axis Machine from Space Institute. Excellent condition. Errors and prior sale excepted.

Year of construction: 2010 CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 500 Y-axis travel mm: 450 Z-axis travel mm: 400 C-axis degrees: 360º (0,001) B-axis degrees: 0º/108º (0,001) Rapid traverse m/min: 80/50/50 Milling/turning table nc: Table dimensions mm: Ø390 Maximum workpiece size (D x H) mm: Ø630x500 Max. workpiece weight kg: 200 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40%ED/cont) Spindle torque Nm: 130/87 Tool system Tool holder: HSK-A 63 Tool magazine slots: 30 With free neighboring places mm: 130 With occupied neighboring places mm: 80 Max. Tool Length mm: 300 Chip-to-chip time s: 5 Equipment Chip conveyor Infrared probe Rinsing gun blowing air through spindle center selectable via M-function Signal lamp Laser tool measurement for measuring tool length and diameter Programmable coolant nozzles Heat comp ...

Manufacturer KONDIA Model A-6 Year 2015 CNC HEIDENHAIN TNC 530 HSCI Table Table surface 800 x 400 mm. Number of T-Slots 3 T-slots (width, distance) 18.125 mm. Table-floor distance 885 mm. Table distance – spindle nose (min/max) 140 / 650 mm. Maximum weight allowed on table 450 kg. Routes and advances Longitudinal travel (X) 600 mm. Cross travel (Y) 410 mm. Vertical travel (Z) 500 mm. Fast forward X/Y/Z axes 30,000 mm./min. Head Spindle taper ISO 40 DIN 69871 Maximum spindle speed 12,000 rpm Spindle power 10 / 17 kW Autoloader Tools Chain Type Random Change Warehouse Positions 20 Maximum tool width with adjacent free positionsq 135 mm. Maximum tool width without adjacent free positionsq 85 mm. Maximum tool length 250 mm. Maximum tool weight 6 kg Equipment Internal cooling 20 BAR INCLUDED Chip evacuator INCLUDED Water gun cleaning parts INC ...

Key data: 835 mm, 510 mm, 510 mm

General Manufacturer: DMG Type: DMC 835V Year of Make: 2008 Control: Heidenhain 530i Travel: X 835 mm Y 510 mm Z 510 mm Operating hours: 24,283 h Spindle Speed: 10,000 rpm Tool holder: SK40 Tool Changer Number of stations: 30x Table Table size: 1,000 x 560 mm Table load: max. 800 kg Dimensions and weight Dimensions: 3,700 mm x 2,450 mm x 2,750 mm Weight: approx. 4,100 kg Condition Condition: Used Functional: Tested and fully functional Other equipment and accessories included: Fourth axle Electric handwheel Chip conveyor

: 0550 mm : 410 mm : 480 mm : 650x410 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0760 mm : 450 mm : 500 mm : 900x450 mm : BBT 40 : 10.000 U/min Motor Capacity: 7,5/11 kW max. table load: 850 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Manufacturer HERMLE Model C40 U Dynamic Year 2006 CNC control HEIDENHAIN iTNC 530 Table Table surface Ø 800 mm. Tilting rotary table INCLUDED Maximum weight on table 1400 kg Table rotation (C-axis) 0.001º (±360º) Oscillation field (B-axis) +25 / -110 º Direct Measurement System INCLUDED Maximum part diameter 840 mm. Routes and advances Strokes (X/Y/Z) 850/700/500 mm X, Y, Z axis fast feed 60,000 mm/min Head Head speed 18,000 r.p.m. SK 40 Head Cone DIN 69871 Main motor power 15 W Main torque 130 Nm Equipment Automatic tool loader INCLUDED No. of positions in tool loader 38 Internal cooling 80 Bar INCLUDED Tank with paper filter 200 l. INCLUDED Active cooling control cabinet INCLUDED Infrared measurement probe part M&H INCLUDED Blum Laser Probe Measurement Tool INCLUDED Chip evacuator INCLUDED Cleaning gun with pump 2 bar 40 l/min INCLUDED 3D Quick ...

Manufacturer: MAZAK Model No.: Variaxis i-800 NEO Year 2023 Condition Used Stock number 9210 Mazatrol Smooth Ai control system Work table length 800 mm Work table width 630 mm Maximum table load (uniform) 1000 kg Maximum vertical spindle speed 18000 1/min X-axis travel 750 mm Y-axis travels 890 mm Travel Z axis 600 mm Taper HSK A100 Number of axles 5 pieces Number of Stacking Positions 80 Pieces Machine height 3497 mm Machine length 2695 mm Machine width 4890 mm Machine weight 18080 kg Equipment: Chip conveyor Handwheel Blowing air on the workpiece Air cooling through the spindle Workpiece rinsing Oil Mist Separator (Gx1000) Smooth Cam AI M Renishaw RMP600 Workpiece Probe High pressure unit (70 bar) Camera in the machine working room Coolant coolers Renishaw PRIMO LTS Tool Probe

working length X: 1.600 mm working length Y: 800 mm working depth Z: 190 mm Workpiece dimensions: mm Workingpiece thickness from to: mm Motor output: 2,2 kW Number of axles: St. Number of milling agregates: St. Number of heads vertical: St. Number of heads horizontal: St. Overall size: mm Weight: ca. 450 kg Year: 2018 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

working length X: 2.500 mm working length Y: 1.300 mm working depth Z: 190 mm Workpiece dimensions: mm Workingpiece thickness from to: mm Motor output: 2,2 kW Number of axles: St. Number of milling agregates: 1 St. Number of heads vertical: St. Number of heads horizontal: St. Overall size: mm Weight: 1.800 kg Year: 2018 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 620 mm, 520 mm, 460 mm

CNC 5 Axis Machining Center Manufacturer Spinner Type U5- 620 Year of construction 2015 Control Siemens 840DE SolutionLine/Shop Mill up to 4 axes simultaneously Travel X/Y/Z 620/520/460 B-axis -90° to 110° C-axis 360° Spindle speed 12,000rpm Tool holder SK40 Tool magazine 32-fold Table size 650/545 Table load 500kg IKZ 26bar Machine hood this includes an automation system from Lang with 20 places and 5 Lang vices, machine cover, roof. The machine is in a used very good condition, it was operated in 1.5 shifts. Was always serviced according to plan, no maintenance backlog and no defect. The machine will be available from March 2027.

Key data: 1000 mm, 2080 mm, 3650 mm

ROUTECH Chronos ht - 5-axis CNC - Year of construction 2013 - Table 3650 x 2080 mm - Availability 12.2026 - without tools - Central vacuum system

Key data: 3200 mm, 1550 mm

SCM Pratix S15 B - Nesting CNC - Year of construction 2012 - Immediately available - without tools

Key data: 3000 mm, 820 mm, 720 mm

48-cavity tool magazine High pressure pump 40 bar Mazak Monitoring B Renishaw RMP60 Probe Tool length measurement NC rotary table with 360,000 positions Chip conveyor, ejection left Cylinder interpolation Rapid Traverse Constant Tilt Angle Milling spindle, synchronized threading 5-axis simultaneous machining

Mayfran ConSep 2000 Coolant System Chip conveyor with drum filter 70 bar high pressure pump Cooling by the spindle Electronic handwheel NC rotary table with 360,000 positions Synchronized Threading Automatic on/off Preparation for Palletech CE mark Documentation

Key data: 4200 mm, 1500 mm

Homag CNC BAZ, Optimat 232/40/K Power Control PC85, Woodwop, ATC 12-fold, A lot of accessories, Gluing unit, ... 2 retractable and extendable changing tables, two-part clamping table with 2 processing stations for pendulum assignment, edge height max. 65 mm, chip and offcut disposal, drill head 17 spindles, main spindle 14.5 KW, speed 24000 1/min Incl. many accessories Condition: dismantled

CNC Machining Center Hedelius Forte 65 Single 1320 Control: Heidenhain TNC 640 Year of Make: 2019 Availability: in stock Internal machine no. 74 Travels: X-axis 1,320 mm Y-axis 650 mm Z-axis 600 mm Total clamping area 1,500 x 650 mm Table load: approx. 1,200 kg Mount: HSK 63 Tool magazine: 65 compartment Spindle speed: 18,000 rpm Drive power: 35 kW Facilities - Inclined bed coolant system 900 l - IKZ 25 bar - Chip conveyors - 1x Rinsing gun - Electronic handwheel

max. workpiece length: 6360 mm profile spindle: 1 Stück main drive: 13 kW Control: Maestro SCM CNC Machining Center ACCORD 40 FX for windows and doors --------------------------------------------------- Available as an OPTION at an additonal cost of 20.000 Euro: extensive window and door tooling among others (window cutting available upon request!): Wooden windows IV 68, 78, 92 Wooden style windows Wood-aluminum windows Front doors Lift-and-slide doors Box windows Machine still in operation, available for viewing! Technical Summary (detailed description available upon request!): --------------------------------------------------- - Working area X-Y = 6360 x 1905 Z = 350 - Automatic table with 8 support rails MATIC - L1825 - 5-axis spindle MAXI - Prisma T, HSK 63 E, 13 kW - RTCP Setting - Self-calibration system for Prisma work unit - Adjustable chip removal device on the electric spin ...

x-travel: 762 mm y-travel: 460 mm z-travel: 460 mm table surface area: 1.000 x 460 mm control: Okuma OSP 20 M rapid traverse: 40/40/32 m/min table load: 0,7 t turning speed range: 12000 U/min power capacity - milling spindle: 22/18,5 kW max. torque on the spindle: 198 Nm no. of tools in the magazine: 32 Stück internal coolant system feed: 20/43 bar tool taper: BT 40 weight of the machine ca.: 6,8 t dimensions: 2.22 x 2,9 x 2,75 m CNC- vertical machining centre with internal coolant First installation 2014 - coolant through the spindel 15 bar, 20 ltr/min - air throug the spindle - chip conveyor - signal lamp - Dual tool change arm - external electric hand weel - tool lenght measuring and toolbreak detection - filter system - X- axis in gantry style - spindle oil cooler - thermal compensation spindel and bed - USB and Ethernet port - Hi-Cut Pro high speed control - 100 Zero offsets - thre ...

CNC Machining Center Kunzmann WF 600 CNC Control: Heidenhain TNC 640 Year of Make: 2015 Internal machine number: 76 Travels: X-axis 600 mm Y-axis 400 mm Z-Axis 400 mm Z-Axis 400 mm Mount: SK 40 DIN69871 Speed: 1 - 5,000 rpm

- Vertical drilling unit with 16 drilling spindles in the X direction - Vertical drilling unit, with 15 drilling spindles in the Y-direction - Vertical drilling unit, with 13 drilling spindles in the Y-direction (grid 25 mm) - Horizontal drilling unit with 6 drilling spindles - Horizontal drilling unit with 2 drilling spindles. - Main spindle 7.5/10 kW - (S1/ S6 operation HSK F63, incl. liquid circulation cooling with integrated CNC axis rotating 360 degrees incl. torque support. - Automatic tool change magazine for 8 seats (plate changer) - HOMATIC - 2000 IPC with WoodWOP 4.0 programming software - Pillar extension Y-direction 120 mm and K-table 1500 mm - Incl. 2 adapter units, see photos

FEATURES: • Longitudinal travel 1020 mm • Cross travel Y 510 mm • Vertical travel Z 575 mm • SIEMENS CNC Type • Table length 1200 mm • Table width 500 mm • Max. Authorized weight 800 kg • Number of tools 30 • ISO 40 spindle taper • Max spindle speed 8000 rpm • Spindle motor power 15 kW • Length x width x height 3275 × 2948 × 2996 • Weight 7500 kg

Key data: 760 mm, 640 mm, 760 mm

X-axis travel:760 mm Y-axis travel:640 mm Travel Z-axis:760 mm Control manufacturer:FANUC Control Model:Series 18i-MB Workpiece height (max.):800 mm Workpiece weight (max.):500 kg Spindle speed (max.):6,000 rpm Number of slots in tool magazine:120 horizontal machining center with patette changer, two pallets 500x500, 120 tool holders, touch probe Tool length:400 mm Tool weight:15 g Equipment:Chip conveyor, documentation/manual

5-axis machining center Hedelius RS 805 K Control: Heidenhain iTNC 530 Year of Make: 2011 Internal machine no. 78 Travels: X-axis 1,500 mm Y-axis 800 mm Z-axis 600 mm Mount: SK 40 Tool magazine: 30 compartment Spindle speed: 12,000 rpm Accessories: - SKM 900 inclined bed coolant system - IKZ 25 bar - Chip conveyors - Handheld operator - Blow-off guns - Rinsing guns

CNC Machining Center Hedelius C 100 -3500 Magnum Control: Heidenhain iTNC 530 Year of Make: 2009 Internal machine no. 79 Travels: X-axis 3,500 mm Y-axis 1,000 mm Z-axis 770 mm Clamping area 4,150 x 1,000 mm Pendulum operation: 2 x 1,450 x 1,000 mm Table load: approx. 4,500 kg Mount: HSK 63 Tool magazine: 70 – compartment Spindle speed: 20 – 12,000 rpm Accessories - Handheld operator - Chip conveyors - Paper tape filter system - 20 bar coolant system

5-axis machining center Hedelius ACURA 65 incl. standby magazine Control: TNC 640 Year of Make: 2017 Internal machine no. 80 Travels: X-axis: 700 mm Y-axis H / V: 650 / 465 mm Z-axis: 600 mm Swivel table: Ø 650 x 540 mm Swivel range: +30° to -115° Table load: 500 kg Mount: DIN 69871 AD 40 Tool magazine: 65 – compartment Spindle speed: 50 - 14,000 rpm Accessories Standby magazine 180 seats Inclined bed coolant system SKM 900 Chip conveyor LTA Suction 3D Probe Rinsing gun KinematicOpt

Vertical High-Speed Machining Center Manufacturer: DMG Mori Type: MILL TAP 700 Year of Make: 2014 Control: Siemens 840D SL Travel paths X/Y/Z: 700 x 420 x 380 mm Spindle speed max.: 24,000 rpm Tool Magazine: 15 Slots Weight approx.: 4.100 kg Automation with robots Manufacturer: Sontec Type: Sonflex Year of manufacture: 2023 Robot Fanuc

Key data: 635 mm, 510 mm, 460 mm

Vertical machining center Manufacturer: DMG Gildemeister Type: DMC 635 v eco Engine No.: 1537000170A Year of Make: 2009 Control: Siemens 810D Shopmill Axles: 3 Travels X: 635 mm Y: 510 mm Z: 460 mm Tool changer: 20 places SK 40 Speed: 20-8,000 rpm Drive power: 13/9 kW (40/100%ED) - Direct displacement measurement system X,Y,Z - Sealing air for measuring systems - Coolant blowing air switching - Table size 560x790 mm - Electronic handwheel Errors and prior sale excepted.

Key data: 380 mm, 250 mm, 350 mm

MÜGA H250-5 built in 2018 the system ran in about 2.5 shifts, the machine has a swivel rotary table, an FMB bar feeder, a cooling lubrication filtration (IKZ) like a chip conveyor, the machine has a Fanuc control and at the moment the spindle is defective - you can also make a price proposal for the machine without spindle, it will take about 5 days until we can order and install a new spindle, from this point on the Müga will only be sold with a new spindle. so with o spindle hours

Key data: 6000 mm, 1580 mm

HOMAG Optimat BOF 311 - Year of construction 2008 - Software WoodWOP 5 - Main spindle 18.5 kW (overhauled in 2024) - Tool changer 30 places (sale without tools/aggregates) - Main spindle with C-axis (Flex-5 interface) - Automatic table - Immediately available - Including dismantling and loading

Key data: 3130 mm, 1250 mm, 100 mm

WEEKE Venture 108 - CNC machining center - Year of construction 2013 - Availability 11.2026 - Without tools/aggregates - V12 drill head - HSK 63 - PowerControl - Flex-5 interface (C-axis) - Tool changer 8-fold - Good condition

axis stroke (X,Y,Z): 6175x1550x300 mm Number of spindle head vertical: 20 St. Number of spindles head horizontal: 10 St. Number of milling agregates: 1 St. Speed: 24.000 U/min. Capacity: 300 kg/h Sawing unit: ja_yes 0 Control: Homag PC85 CNC powerTouch HOMAG BMG 511 /60/12/F/K Profi ----------------------------------- Machine already professionally dismantled and stored at our warehouse in Oberkochen: - 5-axis CNC processing center - Moving gantry machine (dual-drive gantry system) - 1 HOMAG DRIVE 5 C+ routing spindle, 5-axis, HSK-F63, 15 kW, max. 24,000 rpm - 1 HOMAG Multi Processing Unit Drilling head with 30 spindles: V20 / H10 / S360° MPU MultiProcessingUnit with C-axis +/- 185° - 1 Chain tool changer, 30-position - Includes SL laser projector - Includes vacuum suction cups (as available) - Spare parts and accessories as shown in photos - Last HOMAG 5-axis service: 2024 - Last HOMA ...

axis stroke (X,Y,Z): 5.910,1.815,655 mm Number of spindle head vertical: 14 St. Number of spindles head horizontal: 4 St. main drive: 12 kW tool taper: HSK F63 Number of axles: 5 St. Number of tools: 20 St. working area: 5005 x 1450 x 200 mm Number of working hours: 3108 h Masterwood Project 455 L, 5-axis CNC machining center ----------------------------------------------------- Machine can be viewed while still in operation! Sold ex-site. Dismantling and reinstallation by experienced Masterwood technicians available as an option! The Masterwood Project 455 L is a highly flexible, numerically controlled 5-axis machining center featuring a robust gantry design. It has been specifically developed for the sophisticated, complete processing (drilling, milling, grooving) of solid wood, panel materials, windows, doors, and stairs. Thanks to its extended L configuration, the machine offers an e ...

x-travel: 500 mm y-travel: 450 mm z-travel: 400 mm Control: SIEMENS 840 D control: Powerline Shop Mill table surface area: ø 630 x 500 mm table swivelling +/-: 110/5 Grad spindle taper: SK 40 spindle turning speed - stepless: 20 - 10.000 U/min spindle drive: 13 kW max. torque on the spindle: 82 Nm feed speeds: max. 20.000 mm/min rapid traverse: 24 m/min no. of tools in magazin: 30 wotkpiece diameter with 2 vacant positions: max. 130 mm tool length - max.: 290 mm weight of tools max.: 6 kg total power requirement: 17 kVA weight of the machine ca.: 4,05 t dimensions of machine L x W x H: 2,21 x 2,12 x 2,15 m = 5-axis machining center (5 axis simultaneously) with 2-axis NC swivelling rotary table - only 9.609 spindle hours - - the machine was used for sample and prototype production, 3D machine model for kinematic simulation in a CAM programming system (available in IGES and STEP format ...

CNC controller: Heidenhain iTNC 530 Axes X-axis travel mm: 1.200 Y-axis travel mm: 900 Z-axis travel mm: 500 Rapid traverse m/min: 30 Worktable Table dimensions mm: 1.400 × 900 Max. workpiece weight kg: 1.800 Maximum workpiece size (W x L x H ) mm: 1.400 × 900 x 240 Spindle Spindle speed rpm: 10.000 - 16.000 - 24.000 Spindle drive power kW: 32 Spindle torque Nm: 200 Tool system Tool holder: HSK-A63 Tool magazine slots: 30 Max. Tool Diameter: 125 Max. Tool Length mm: 300 Max tool weight kg: 4 Chip-to-chip time s: 6,5 Equipment Electronic Handwheel Chip conveyor Workarea light Cooling Tank capacity: 300 L Machine running times Under power: 103.179 Rated power kVA: 31 Operating Time: 23.273 Basic machine dimensions / weight Length mm: 4.000 Width mm: 3.000 Height mm: 2.800 Weight kg: 13.200

Key data: 800 mm, 800 mm, 500 mm

Control: HEIDENHAIN iTNC 530 with smarT.NC Tool holder: HSK-A63 Machining: 3-axis simultaneous Total weight: 14,500 kg Table length: 920 mm Table width: 800 mm Spindle speed (max.): 12,000 rpm Tool magazine with 33 slots Max. workpiece weight: 1,800 kg Special equipment - 3D probing system - Tool measurement - Electronic handwheel - Roller blind roof cover FREE LOADING!

x-travel: 885 mm y-travel: 600 mm z-travel: 450 mm b-axis: +20/-110 ° c-axis: 360 ° spindle speed:: 18.000 U/min spindle drive: 15 kW Tool adapter: HSK-A63 table diameter: 600 mm Tools changer: 30 fach/tools chip conveyor: kW Internal cooling system: 401 bar Control: HEIDENHAIN iTNC 640 total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m DMG HSC 70 – 5-Axis Machining Centre - 5-axis machining centre with linear motors - HEIDENHAIN iTNC 640 - Portal-type construction - Electrospindle with 18,000 rpm - 30-tool automatic tool changer - Probes included for tool and workpiece measurement - Internal coolant supply at 40 bar pressure - BLUM laser tool measurement system - DMG TS649 workpiece measuring probe The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Type XL-2812S Processing wood length 150mm~3050mm Processing wood width 40mm~1200mm Processing wood thickness 10mm~60mm Max moving speed of x-axis 150m/min Max moving speed of Y-axis 90m/min Max moving speed of Z-axis 45m/min Drill group vertical drilling 7 pieces2 Drill group horizontal drilling (2 x 2)pieces Drill down vertically 6 pieces Drill group power 2.2KW×2 Lou milling spindle mode Er3 Lou milling speed 18000r/min Lou milling spindle power 3.5kw×2 Workbench height 900mm Lord enters the diameter of the suctionpipe 150mm Total power 19.8kw Operating voltage 380V 50HZ Working pressure 0.6-0.8Mpa Weight 3500Kg Dimensions 5500mm×2750mm×2300mm Price 28500 Eur (EXW Jonava, Lithuania)

Year of construction: 2016 CNC controller: CELOS with SIEMENS 840D sl operate 21,5" ERGOline Control with Multi-Touch Screen Axes X-axis travel mm: 800 Y-axis travel mm: 1050 Z-axis travel mm: 850 C-axis degrees: 360º (0,001) B-axis degrees: -30º/180º (0,001) Feed rates m/min: 60 Rapid traverse m/min: 60 Acceleration in the axes m/s2: 7 Milling/turning table nc: Table dimensions mm: Ø900x700 Max. workpiece weight kg: 1800 Table rotation speed rpm: 40 Spindle Spindle speed rpm: 18000 Spindle drive power kW: 35/25 (40/100%ED) Spindle torque Nm: 130/86 (40/100%ED Cooling Cooling through the Spindle Center bar: 40 Tank capacity: 600 Tool system Tool holder: HSK-A 63 Tool magazine slots: 63 Tool changer: Double gripper With free neighboring places mm: 120 With occupied neighboring places mm: 80 Max. Tool Length mm: 650 Max tool weight kg: 15 Chip-to-chip time ...

Key data: 2240 mm, 500 mm, 600 mm

Control: Name: Heidenhain Handwheel Travel: x-axis: 2240 mm OR 2 x 950 mm // y-axis: 500 mm // z-axis: 600 mm Technical data: • Spindle 12000 rpm • SK 40 interface • Tool changer 36 places • Discharge height 450 mm • Rotary table RTA 1-180 • Renishaw MP10E 3D touch probe • Scraper belt chip conveyor • Fully enclosed workspace • Two manual rinsing guns • Work area lighting Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

Key data: 650 mm, 800 mm, 560 mm

Control: Name: Heidenhain TNC 640 Handwheel: Heidenhain Technical data: • Spindle: 15000 rpm • HSK-A63 interface • 80-fold tool changer • Swivel rotary table Ø 500 mm • Chip conveyor • IKZ (internal coolant supply) • Probes • RotoClear • Rinsing gun • Signal light The machine is in very good condition. Prior sale is reserved. No liability is assumed for the technical information provided here. The legal provisions apply.

axis stroke (X,Y,Z): 1300,2500,300 mm Number of tools: 8 St. Dimensions (L/W/H): 3560x2250x2810 mm Weight: 2000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 1500,3000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 4160x2650x2810 mm Weight: 2300 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,3000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 4160x3040x2810 mm Weight: 2500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,4000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 5160x3040x2810 mm Weight: 2900 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,5000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 6000x2900x2810 mm Weight: 4500 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

axis stroke (X,Y,Z): 2100,6000,300 mm Number of tools: 12 St. Dimensions (L/W/H): 7000x2900x2810 mm Weight: kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.