numerically controlled machining used for sale

This 3-axis Leadwell V-40 was manufactured in 1996. It features a BT40 spindle, a 20-tool automatic tool changer, and a maximum spindle speed of 8,000 rpm. External coolant is provided at 2 bar. If you are looking to get high-quality milling capabilities, consider the Leadwell V-40 machine we have for sale. Contact us for more information about this machine.

Technical data Manufacturer: Hurco Model: VMX24 Machine Type: Vertical CNC Machining Center Year of Make: 2001 Machine number: H20131 Control: Hurco Ultimax Operating hours: 42,221 h Configuration Vertical machining center T-slot work table Closed protective cabin Control panel with double screen Hand control unit (jog handwheel) Emergency stop available Interfaces: Port 1 / Port 2 / Coax / 10BASE-T Note The technical data was recorded exclusively on the basis of the visible nameplates and components of the machine. There was no additional machine documentation. Auction-ID: A7-46048-30

This STAMA MC526 was manufactured in 2008. It features a 40-tool magazine, NC swivel table, chip conveyor, belt filter system, and an internal coolant supply via the spindle. Additional amenities include a high-pressure system, Renishaw probe, and an extraction system. Consider the opportunity to buy this STAMA MC526 vertical machining centre. Contact us for more information.

Machine serviced and 1 year warranty on replaced parts: New brocaded motor X and Y Axis Pinion and Pinion. On-board computer and runners Possibility to have a 4th focused on request with an extra charge. As well as an optional 2D laser Training that can take place at the seller's premises or by means of an on-site supplement ( French - English - Dutch - German - Russian) The machine will be available 6-8 weeks after payment of the deposit. The seller can take care of the transport but not the unloading (additional quote) Can take care of the installation work in the control room (additional quote) Vacuum pump 170m3 /h Auction-ID: A3-43519-35563

This 3-axis MIKRON VCE 600 Pro was manufactured in 2006. It features a Heidenhain controller and an SK40 spindle mount, with a total of 13,869 spindle hours. If you are looking to get high-quality milling capabilities, consider the MIKRON VCE 600 Pro machine we have for sale. Contact us for more information.

x-travel:1400 mm y-travel:1200 mm z-travel:1350 mm control:MSX- 701 Mapps III table surface area:800 x 800 mm rapid traverse:50 m/min table rotating:360.000 x 0,001 B-Achse ° table load:2,0 t numbers of pallets:2 turning speed range:8000 1/min power capacity - milling spindle:37 kW no. of tools in the magazine:60 Stück tool taper:HSK-A 100 weight:31 t dimensions:5,9 x 3,48 x 3,68 m Equipment: - Thru-the-spindel coolant system Mayfran Consep 2000 70 bar with chipconveyor - Helical cutting + Synchronized tapping - Parts program memory 1 MB - Knoll 70 bar high pressure and filter system - Electrostatic oil dust collector LTA - elect. hand wheel - renishaw probe - abso- scale i X/Y/Z- axis - 5 free m- funktions - 48 extra off sets - dual ballscrews on X/Y/Z- axis

x-travel:560 mm y-travel:560 mm z-travel:660 mm control:Celos Siemens 840D SL Operate ERGOline Multitouch turning speeds:20 - 20.000 1/min spindle drive:25/ 35 kW max. torque on the spindle:86 / 130 tool taper:HSK-A63 Number of tool station:60 diameter of tools max.:70 mm Tool diameter with no neighbouring tools:170 mm tool length - max.:450 mm weight of tools max.:12 kg numbers of pallets:2 Pallet dimension:400 x 400 mm max. workpiece diameter:630 mm workpiece height max.:900 mm table load:400 kg rapid travel x/y/z:60 m/min Feed x/y/z:60 m/min internal coolant system feed:70 bar weight of the machine ca.:8,5 t dimensions:3200 x 4800 x 2900 mm Renishaw probe (spindle):Vorbereitung / preparation only Horizontal machining center with Siemens - Celos control, full b-axis, tool magazine with 123 pos. HSK-A 63, coolant through spindle 40 bar. The machine has just received a new milling spind ...

This 5-axis DMG DMU 100 T was manufactured in 2002. It features a Heidenhain control system and a SK40 taper. Note that the pneumatic cylinder of one of the two tool changers is defective and needs replacement. Consider the opportunity to buy this DMG DMU 100 T vertical machining centre. Contact us for more information about this machine.

x-travel:630 mm y-travel:600 mm z-travel:650 mm control:MSC 502 (Fanuc 16) Spindle RPM:12000 1/min spindle drive:22 / 18,5 kW rapid travel x/y/z:32 m/min Pallet dimension:500x500 mm numbers of pallets:2 table load:0,5 t working diameter:max. 610 mm Number of tool station:60 BT40 max. tool length:360 mm max. tool weight:12 kg tool changing time:1,3 sec B-axis positioning (non continuous):1 total power requirement:50 kVA weight of the machine ca.:14 t dimensions of the machine ca.:3,3 x 5,8 x 3,2 m spindle load monitor:Typ C This horizontal machining center comes with a pallet changer with 2 pallets, and has the following options: ATC 60 tool stations, High pressure coolant trough spindle interface,

This 3-axis MIKRON VCP 600 vertical machining center was manufactured in 2001. It features a 30-position tool changer, although only 21 positions are currently usable. The high-speed spindle operates at 8,000 rpm due to a slight imbalance. Consider the opportunity to buy this MIKRON VCP 600 vertical machining center. Contact us for more information.

x-travel:1530 mm y-travel:530 mm z-travel:465 mm side by side, right side fixed table X =:925 mm side by side left side 2 axis table X =:780 mm control:Heidenhain TNC 640 tool magazin::122 SK 40 spindle turning speed - stepless:12.000 1/min Spindle Torque:120 Nm power capacity:22 kW Fixed Table Dimensions:920 x 540 mm Table load fixed table:2000 kg Max. parts size on fixed table:900 x 500 x 400 mm Diameter of integrated 2-axis rotary table:650 mm Table load rotary table:500 kg B-axis swivel angle:-90°/+110° ° / deg Max. parts size on rotary table:600 x 500 x 400 mm Max. Parts size over both tables:1500 x 500 x 400 mm internal coolant system feed:70 bar bar weight of the machine ca.:10,5 t dimensions of the machine ca.:3,65 x 2,53 x 2,81 m pendant hand wheel:HR 510 FS Measuring probe for work piece:Blum TC 52 The SpinnerU5 1530 5-axis machine with Heidenhain iTNC 640 control is as new ...

This 3-axis DMG DECKEL MAHO DMC 64V linear was manufactured in 2005. Ideal for precision machining, this vertical machining center offers robust performance and reliability. Consider the opportunity to buy this DMG DECKEL MAHO DMC 64V linear vertical machining center. Contact us for more information.

x-travel:800 mm y-travel:950 mm z-travel:1020 mm control:Sinumerik 840D sl MDynamics Operate turning speeds:10.000 1/min Spindle power:26/20 kW max. torque on the spindle:340/262 Nm tool taper:HSK-A 100 tool change unit:120 (2x60) Pos. Pallet changer 2x:630 x 630 mm table load capacity:800 kg weight of the machine ca.:20 t dimensions of the machine ca.:3,3 x 6,15 x 3,2 m 6-axis simultaneous horizontal machining center with controlled swivel-rotary table (A/B-axis), Swivel table can swing overhead (180°), that means the part is hanging down overhead and chips don?t accumulate on pallet, they can fall free into the chip conveyor CNC controlled U-axis enables radial movement of tool for variable spindling diamenter. twin pallet changer 630 x 630 mm 6 hydraulic couplings for pallet fixture clamping with rotary joint in A and B-axis special hydraulic pump for fixture coolant through spindle  ...

This 3-axis Hurco VMX 60 was manufactured in 2008. A vertical machining center featuring a MAX Control system, it offers X-axis travel of 1,524 mm, Y-axis travel of 660 mm, and Z-axis travel of 610 mm. It includes a spindle speed of 10,000 rpm, a BT40 spindle taper, and a 24-position tool turret. Consider the opportunity to buy this Hurco VMX 60 vertical machining center. Contact us for more information about this machine.

x-travel:600 mm y-travel:580 mm z-travel:530 mm distance spindle center to column:630 mm distance spindle center to table:100-600 mm milling feed range:1-10.000 mm/min max. table load:200/100 kg max. tool weight:8 kg positioning accuracy:+/- 0,01 mm :8000/15000 1/min spindle drive:7,5/11,5 /5,5 kW repeating accuracy:+/- 0,008 mm weight of the machine ca.:7,4 / 7,65 t Brand-new CNC vertical machining center with CNC control FANUC or HEIDENHAIN Warranty: 12 months More information can be found in the Appendix.

This 3-axis Wele AA1165 was manufactured in 2014. A vertical CNC machining center featuring a Fanuc 0i-MC control, it offers X/Y/Z travels of 1,100 mm, 650 mm, and 600 mm respectively. Rapid feeds reach up to 24 m/min, with a spindle speed of 15,000 rpm. The table supports loads up to 1,100 Kg. Consider the opportunity to buy this Wele AA1165 vertical machining center. Contact us for more information about this machine.

x-travel:1000 mm y-travel:1150 mm z-travel:700 mm table-size:900 mm table load:1500 kg spindle speeds:10.000 1/min spindle drive:Motorspindel von Cytec CS34-180-A 34&42KW/160&200 Nm spindle taper:A100 HSK T-slots:18mm/7/100 mm milling feed range:20.000 mm/min rapid traverse feeds:X/Y/Z: 24 m/min diameter of tools max.:150 mm workpiece length:300 mm weight of tools max.:20 kg weight of the machine ca.:15 t dimensions of the machine ca.:s. Katalog m CNC controller:Heidenhain iTNC-640 HSCI-Steuerung cnc rotary table:von Cytec; mit Ø900mm; 800 1/min Drehmomenttisch (AS3347) + HSK-T63/100 Spindel & ATC + TNC-640 Fräsdrehzahlregelung B-axis:Fräskopf, 0-180° c-axis:0,001° automatic tool changer:HSK-A/T100; 60 fach Scales:in X/Y/Z von Heidenhain mit Druckluft inner coolant:20

This 3s SPINNER VC 560s was manufactured in 2007. It is a CNC Milling Machine featuring a 3-axis configuration, prepared for a 4th axis (included but not installed). The machine is operational and comes complete with all tooling and a tool cabinet. With a maximum spindle speed of 12,000 rpm and rapid traverse of 48 m/min, consider the opportunity to buy this SPINNER VC 560 vertical machining centre. Contact us for further details.

x-travel:630 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:6,5 t Number of axles:5 St. spindle turning speed range:18.000 U/min numbers of tools in magazin:24 tool taper:SK 40 Round Table B-Axis

This DMG ecoMill 800v was manufactured in 2016. It features an impressive X-axis travel of 800 mm, Y-axis travel of 560 mm, and Z-axis travel of 510 mm. The machine includes a robust table size of 1100 x 560 mm and a maximum table load of 800 kg. If you are looking to get high-quality machining capabilities, consider the DMG ecoMill 800v vertical machining centre we have for sale. Contact us for further details.

x-travel:800 mm y-travel:400 mm z-travel:350 mm total power requirement:44 kW weight of the machine ca.:8,8 t dimensions of the machine ca.:6,1 x 4,1 x 3,3 m tool taper:HSK63 number of spindle speeds:36-12.000 Number of tools:2 x 21 St. rotary table diameter:1340 mm Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

This 3-axis CHIRON FZ08W was manufactured in 2006. A vertical CNC machining center featuring a Fanuc 21i-M series control, it offers X, Y, Z travels of 300 mm, 250 mm, and 250 mm respectively. It includes a table size of 550 x 300 mm, a spindle speed of 10,000 rpm, and a 12-position tool magazine. Consider the opportunity to buy this CHIRON FZ08W vertical machining center. Contact us for more information.

x-travel:600 mm y-travel:770 mm z-travel:675 mm total power requirement:47 kW weight of the machine ca.:13 t Tool bore:HSK-A63 numbers of tools in magazin:40 including additional tool magazine ZM 182 1 spindle , 5 axes Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

This 5-axis DECKEL MAHO DMP60S was manufactured in 2003, featuring a vertical machining center with X, Y, Z travels of 760 mm, 460 mm, and 560 mm respectively. It includes a NC rotary axis, NC swivel milling head, and a tool magazine with 60 positions for HSK-A 63. Additional features include an internal coolant supply and a chip conveyor. Consider the opportunity to buy this DECKEL MAHO DMP60S vertical machining center. Contact us for more information about this machine.

This 5s FEHLMANN PICOMAX 90-HSC + Erowa automation was manufactured in 2005. It features a table size of 920x380 mm, with an impressive spindle speed of up to 35,000 rpm and a control system by Heidenhain TNC 530. If you are looking to get high-quality machining capabilities, consider the FEHLMANN PICOMAX 90-HSC + Erowa automation we have for sale. Contact us for further details.

x-travel:630 mm y-travel:630 mm z-travel:500 mm number of spindle speeds:0 - 15000 spindle motor:32 kW size of pallet:500 x 500 mm b-axis:36000 x 0,001 ° no. of workpieces in the magazine:61 Stück tool taper:HSK 63 weight of the machine ca.:15 t Single-Spindle Mechanical processing cylinder head VR6

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:20 t dimensions of the machine ca.:6,80 x 3,0 x 3,20 m Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

This 3s DMG MORI DMC 1035 V ecoline was manufactured in 2012. It features travels of 1035 mm in the X-axis, 560 mm in the Y-axis, and 510 mm in the Z-axis, with a spindle speed range of 12,000 rpm. The machine includes a 20-station tool magazine and an internal coolant supply. Consider the opportunity to buy this DMG MORI DMC 1035 V ecoline vertical machining centre. Contact us for further details.

x-travel:1000 mm y-travel:800 mm z-travel:1100 mm weight of the machine ca.:15,2 t Tool bore:SK50 Tool taper:HSK-A 100 turning speed range:45-6.000 U/min size of pallet:630x800 mm change time of pallets:21 sec Mechanical processing of cylinder heads and cylinder crankcases Machines have been in single-shift operation since 2013 Service and maintenance intervals were adhered to

This 5s POSmill H 500 U was manufactured in 2017. It features a Heidenhain TNC 530 control, a 60-station tool magazine, and a KESSLER rotary table with a diameter of 500 mm. The machine includes advanced systems such as automatic coolant level monitoring and a BLUM laser tool measuring system. Consider the opportunity to buy this POSmill H 500 U vertical machining centre. Contact us for further details.

spindle speed::max. 12000 tool taper:HSK 80 . b-axis:360 x 0,001 ° worktool support (A-axis):+40 / -95 ° weight of the machine ca.:25 500 Kgs. x-travel:800 mm y-travel:700 mm z-travel:630 mm dimensions of the machine ca.:6200 x 3000 x 3200 mm pallet size::500 x 500 mm no. of tools in the magazine:61 Nos. Weight approx.:23,5 t Horizontal Machining Center with CNC Control System SIEMENS 840 C in well maintained condition. Single spindle

This 5s HAAS UMC 750 was manufactured in 2013. It features a spindle speed of 12,000 rpm and a tool capacity of 41 tools, making it suitable for various machining tasks. The machine offers a maximum table load of 300 kg and includes advanced coolant systems for efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS UMC 750 universal machining center we have for sale. Contact us for further details.

This 5s Okuma MU 6300 V L 5 AXIS was manufactured in 2016. It features a generous X-Axis travel of 1,450 mm and Y-Axis travel of 1,050 mm, providing ample workspace for various machining tasks. With a maximum workpiece diameter of 830 mm and a tool magazine capacity of 64 positions, consider the opportunity to buy this Okuma MU 6300 V L vertical machining centre. Contact us for further details.

x-travel:800 mm y-travel:950 mm z-travel:1020 mm weight of the machine ca.:17 t dimensions of the machine ca.:6 x 3 x 3,2 m Diameter of the table:770 mm max. table load:800 kg tool taper:HSK-A63 max. tool length:465 mm no. of tools in magazin:60 spindle turning speed range:12.000 U/min feed power:8 kN kp power capacity:25/35 kW 5 axis G550-1024 HSK A-63 Grob (Bezeichnung G550-1024) 1 spindle Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

This 4-axis TAJMAC-ZPS H40 TREND was manufactured in 2004. It features a rotary table and two-pallet automatic changer, enhancing productivity and flexibility. The machine accommodates a maximum workpiece size of dia 600 x height 600 mm and supports up to 300 kg. Ideal for complex machining tasks, it includes a high-pressure cooling system and a laser tool probe. Contact us for more information about this machine.

x-travel:780 mm y-travel:560 mm z-travel:560 mm weight of the machine ca.:10 t Number of axles:5 St. spindle turning speed range:20-12.000 U/min numbers of tools in magazin:30 tool taper:SK 40 surface area:500 x 630 mm Round Table B-Axis Texte, Bilder, Grafiken, Layout, Strukturen und Algorithmen etc. unterliegen weltweitem Urheberrecht. Unerlaubte Verwendung der Daten, werden sowohl strafrechtlich als auch zivilrechtlich verfolgt. Das ausschließliche Urheber- / Nutzungsrecht dieser Daten wurde nachfolgender Person eingeräumt. Copyright © 2005-2026, Josef Weber. All rights reserved.

This 3s Huron VX8 DNU was manufactured in 2019, featuring a table size of 1,000 x 530 mm and a load capacity of 500 kg. With an X-axis travel of 820 mm and a rapid traverse speed of 24,000 mm/min, it offers efficient machining capabilities. Consider the opportunity to buy this Huron VX8 DNU vertical machining centre. Contact us for further details.

x-travel:700 mm y-travel:630 mm z-travel:700 mm weight of the machine ca.:15 t dimensions of the machine ca.:4,20 x 2,90 x 2,90 m pallet size::500 x 500 mm tool taper:SK 40 Tool taper:HSK-A 63 turning speed range:10.000 U/min

x-travel:2000 mm y-travel:1600 mm z-travel:1140 mm b-axis:0.0001° x 360° ° number of pallets:4 table surface area:1000 x 1450 mm max. table load:6.000 kg turning speed range:4 - 10000 U/min power capacity at 100 % load:40 kW kW tool taper:HSK100 DIN69893A machine weight ab.:63.000 kg space required L x W X H:12320 x 11000 x 4700 mm incl. 50 x HSK100 tool tapers

This 3s HAAS Super Mini Mill HE was manufactured in 2005, featuring a robust Haas CNC Control and an IBAG Switzerland spindle with a maximum speed of 40,000 rpm. The machine includes an Automatic Tool Changer with a capacity for 18 tools, ensuring efficient operation. If you are looking to get high-quality machining capabilities, consider the HAAS Super Mini Mill HE vertical machining centre we have for sale. Contact us for further details.

x-travel:450 mm y-travel:450 mm z-travel:450 mm weight of the machine ca.:14 t size of pallet:320 x 320 mm number of spindles:2 Double spindle 4-axis machining center Horizontal 4 machine plates Renishaw probe Control Siemens Sinumerik 840D Working space (X / Y / Z): 450x450x450 mm Load pallet / table max .: 300 kg Acceleration: 10 m / s² Rapid traverse: 60 m / min Pallet size: 320 x 320 mm Chip-to-chip time: 2.6 s Workpiece height max .: 700 mm Tool holder: HSK 63 Tool places: 2x 60 Tool spindle: 10,000 rpm, 95 Nm Speed increase to 18,000 rpm Infrared receiver for probe, Make Renishaw Vaf72a0p Tool magazine with 60 places Control panel on the workstation Control panel on the tool installation site Workpiece positioning stations can be rotated manually with hydraulic workpiece clamping 60 bar Pneumatic support control on the workstation Automatic swing gate Extended coolant layer 70 ba ...

This 3s Takumi V12s vertical machining centre was manufactured in 2022. It features a robust table size of 1,250 x 650 mm and a maximum load capacity of 1,200 kg, making it suitable for various machining tasks. With a spindle speed of 12,000 rpm and rapid feed rates of up to 24 m/min, it offers efficient performance. Consider the opportunity to buy this Takumi V12 vertical machining centre. Contact us for further details.

x-travel:800/945 mm y-travel:800 mm z-travel:600 mm spindle motor:27 kW spindle turning speed range:10 - 8000 U/min spindle taper ISO:40 c-axis:360.000 x 0,001 table load capacity:600 kg table clamping surface::800 630 mm total power requirement:55 kW weight of the machine ca.:16 t Machine with Heidenhain iTNC 530 CNC control for 5 axis - pendulum operation with turn- swivil table left and fixed table right - tool changer for 30 tools - coolant device, chip conveyor - complete splash housing

This 3s HAAS VF-5/40 vertical machining centre was manufactured in 2023. It features an impressive X-Axis travel of 1270 mm, Y-Axis travel of 660 mm, and Z-Axis travel of 635 mm, making it suitable for various machining tasks. With a spindle speed of 8100 rpm and a tool changer capacity of 20/24+1 stations, consider the opportunity to buy this HAAS VF5/40 vertical machining centre. Contact us for further details.

x-travel:1660 mm y-travel:760 mm z-travel:660 mm weight of the machine ca.:8700 t dimensions of the machine ca.:4.320 x 3.380 mm distance spindlenose - table min./max.:808 mm distance work spindle /surface of the table:155 - 815 mm Machine height:2850 mm floor space required (w/o switchgear cabinet):4.320 x 3.380 mm spindle motor:11 (10 Minuten) /7,5 (30 Minuten)/ 5,5 (Dauerbetrieb) kW tool taper:SK 40 Spindle RPM:40 - 7.000 (Standard ) / 40 - 10.000 ( Option ) 1/min surface area:2.000 x 760 mm max. table load:1.000 kg feeds X-axis:1 - 5.000 mm/min rapid traverse X-axis:24.000 m/min rapid traverse Y-axis:24.000 feeds Y-axis:1 - 5.000 mm/min feeds Z-axis:1 - 5.000 mm/min rapid traverse Z-axis:20.000 m/min

This 3s EMCO Concept Mill 105 was manufactured in 2016. It features a maximum spindle speed of 5000 rpm and a spindle motor power of 1.1 kW, providing efficient machining capabilities. The machine has a table size of 420 × 125 mm and a maximum table load of 10 kg. If you are looking to get high-quality milling capabilities, consider the EMCO Concept Mill 105 vertical machining centre we have for sale. Contact us for further details.

x-travel:635 mm y-travel:510 mm z-travel:460 mm turning speed range:20 - 10.000 U/min tool taper:SK 40 table clamping surface LxW:790 x 560 mm Machine with glass scales Full safety cabin with sliding doors + interior lighting Height-adjustable machine shoes 3 pcs.

This 4s DOOSAN DNM 500II was manufactured in 2016, featuring a table size of 1200 × 540 mm and a maximum table load of 800 kg. With an X-axis travel of 1020 mm and a spindle speed of 12,000 rpm, this vertical machining center offers efficient machining capabilities. Consider the opportunity to buy this DOOSAN DNM 500II vertical machining center. Contact us for further details.

x-travel:1.100 mm y-travel:900 mm z-travel:1.250 mm tool length:750 mm rapid traverse in x-y-z axis:60 feeding capacity X Axis:17.000 daN feed capacity Z - max.:17.000 N spindle taper:SK50 max. workpiece weight:1500 kg revolutions per minute:10.000 U/min pallet table size:630 x 630 mm tool magazin::165x (bis D=125mm), 21x (bis D=225mm), 8x (bis D=350mm total power requirement:37 kW

This 3-axis KOVOSVIT MAS MCV 800 QUICK was manufactured in 2018. It features an X-axis travel of 800 mm, Y-axis travel of 500 mm, and Z-axis travel of 550 mm. The machine includes a robust table size of 1000 x 500 mm and a maximum table load of 600 kg. If you are looking to get high-quality machining capabilities, consider the KOVOSVIT MAS MCV 800 QUICK vertical machining centre we have for sale. Contact us for further details.