numerically controlled machining used for sale

Conveyor belt, belt conveyor, conveyor belt, belt conveyor, corner transfer unit, roller conveyor, roller conveyor, driven roller conveyor, roller conveyor with discharge conveyor, transfer station -Manufacturer: Grenzebach, conveyor belt type ZFT with lifting unit -Speed: frequency controlled -Conveyor belt length: 2440 mm -Belt spacing: 400 mm -Drive: SEW-Eurodrive 0.075/0.37 kW 280-1400/14-72 rpm -Lifting unit: see photos -Number: 1x conveyor belt available -Dimensions: 2450/1370/H970 mm -Weight: 390 kg

Heavy-duty lathe, cycle-controlled lathe, lathe, center- and feed-screw lathe, center- and feed-screw lathe, CNC lathe -Control: Monforts Control System MTC K -Machine bed: hardened -Turning length: 1100 mm -Turning Ø over bed: 560 mm -Turning Ø over support: 300 mm -Spindle bore: Ø 60 mm -Spindle speeds: 2 - 2800 rpm -Key bar chuck: Schunk Ø 250 mm -Tailstock mount: MK5 -Drive: 16 kW -Accessories: Multifix tool holder, tools see photos -Dimensions: 1600/2860/H1830 mm -Weight: 3300 kg

Conveyor belt, belt conveyor, transport belt, belt conveyor, belt conveyor, flat belt conveyor -Manufacturer: Montech, belt conveyor type TB30-185M with adjustable guide rails -Speed: frequency-controlled 38.3 - 51.1 m/min -Drive: Oriental Motor 120W, see photo of the nameplate -Voltage: 0-240V / 0-333Hz -Belt width: 155 mm -Conveyor length: 460 mm -Transport dimensions: 460/345/H200 mm -Weight: 11 kg

Object Electronically controlled tool dispensing cabinet Manufacturer: Supply Point Systems Model No.: LID.0001M Serial Number: 000037 Design: Sheet steel housing with 8 drawers With control screen, Opticon barcode scanner and electronic access control Electrical connection: 230 V AC, 50-60 Hz Current consumption: 0.2 A Power: 40 W Dimensions L × W × H: 900 × 800 × 1,200 mm Weight: 300 kg Contents - Red plastic storage containers - Drawer dividers Note The article comes from a plant closure, was actively used in production until the end and was electrified. Auction-ID: A7-49302-13

Raptor radio-controlled mower, tracked, self-adjusting cutting height. Never used Overall dimensions: 1000 x 1000 x 700 mm Weight: 300 kg Auction-ID: A7-49495-200

Raptor radio-controlled mower, tracked, self-adjusting cutting height. Never used Overall dimensions: 1000 x 1000 x 700 mm Weight: 300 kg Auction-ID: A7-49514-28

Raptor radio-controlled mower, tracked, self-adjusting cutting height, never used Overall dimensions: 1000 x 1000 x 700 mm Weight: 300 kg Auction-ID: A7-49514-208

Raptor radio-controlled mower, tracked, self-adjusting cutting height. Never used Overall dimensions: 1000 x 1000 x 700 mm Weight: 300 kg Auction-ID: A7-49495-60

Brand: MARTINEZ SOLE Year: 2003 Material: 304 stainless steel, raw cold-rolled interior, BLAF 2B exterior Capacity: 610 hL (61,000 litres) divided into 260 hL + 175 hL + 175 hL Configuration: temperature-controlled vertical cylindrical tank on legs, 3 superimposed compartments, sloping flat bottom Diameter: 3600 mm Overall height: 9100 mm approx. High compartment: central chimney, hatch Ø 500 with clamping studs, 1 winding pipe, gangway support, stainless steel door 1000 x 800 mm with guillotine opening with mud flap, stainless steel ball valve Ø 70 clear, stainless steel taster, 8 m² channel thermoregulation circuit, strip level, self-emptying spoon bottom, total emptying by stainless steel ball valve Ø 70 Middle compartment: off-centre chimney, hatch Ø 500, oval autoclave door 310 x 420 mm with internal opening, stainless steel ball valve Ø 70 and decanter elbow, stainless steel ...

Brand: MARTINEZ SOLE Year: 2003 Material: 304 stainless steel, raw cold-rolled interior, BLAF 2B exterior Capacity: 610 hL (61,000 litres) divided into 260 hL + 175 hL + 175 hL Configuration: temperature-controlled vertical cylindrical tank on legs, 3 superimposed compartments, sloping flat bottom Diameter: 3600 mm Overall height: 9100 mm approx. High compartment: central chimney, hatch Ø 500 with clamping studs, 1 winding pipe, gangway support, stainless steel door 1000 x 800 mm with guillotine opening with mud flap, stainless steel ball valve Ø 70 clear, stainless steel taster, 8 m² channel thermoregulation circuit, strip level, self-emptying spoon bottom, total emptying by stainless steel ball valve Ø 70 Middle compartment: off-centre chimney, hatch Ø 500, oval autoclave door 310 x 420 mm with internal opening, stainless steel ball valve Ø 70 and decanter elbow, stainless steel ...

Brand: MARTINEZ SOLE Year: 2003 Material: 304 stainless steel, raw cold-rolled interior, BLAF 2B exterior Capacity: 610 hL (61,000 litres) divided into 260 hL + 175 hL + 175 hL Configuration: temperature-controlled vertical cylindrical tank on legs, 3 superimposed compartments, sloping flat bottom Diameter: 3600 mm Overall height: 9100 mm approx. High compartment: central chimney, hatch Ø 500 with clamping studs, 1 winding pipe, gangway support, stainless steel door 1000 x 800 mm with guillotine opening with mud flap, stainless steel ball valve Ø 70 clear, stainless steel taster, 8 m² channel thermoregulation circuit, strip level, self-emptying spoon bottom, total emptying by stainless steel ball valve Ø 70 Middle compartment: off-centre chimney, hatch Ø 500, oval autoclave door 310 x 420 mm with internal opening, stainless steel ball valve Ø 70 and decanter elbow, stainless steel ...

Self-propelled lawn mower, track, with remote control, suitable for grasses. Includes trickle charger. Can be used on a slope of 70% Direct solution in agricultural landscaping, in orchards, vineyards, slopes, embankments, farms, solar power plants, etc. Remote mowing is safe and efficient. Drive electric, mow gasoline Unused Auction-ID: A1-40311-190

The milling center DUGARD EAGLE 660 was produced in 2005. The vertical machining center has a reconditioned spindle with a tool haul change - a rod, springs and a gripper. Technical parameters of the CNC milling machine: - CNC controller: SIEMENS SINUMERIK 810D ShopMill - workpiece probe - tool probe Worktable : - table dimensions: 810 x 510 mm - maximum table load: 500 kg - T-slot, quantity: 5 mm - T-slot, size: 18 mm - T-slot, spacing: 100 mm Processing field: - X axis travels: 660 mm - Y axis travels: 530 mm - Z axis travel: 510 mm - distance of the spindle tip to the axis of the table: 150 ~ 660 mm - distance of the spindle axis to the column: 585 mm Spindle: - spindle taper: ISO 40 - constant spindle power: 11 kW - spindle power 30 min. : 15 kW - spindle speed range: 80 ~ 8000 rpm. Rapid feeds: - X axis travel: 30 m / min. - Y axis travel: 30 m / mi ...

MORI SEIKI SH-500/40 Horizontal Machining Center was built in Japan in 1999 by MORI SEIKI CO., LTD. The machine is equipped with a numerical control type MORI SEIKI MSC-502. The milling machine has a table size of 500 x 500 mm and processes workpieces weighing up to 500 kg. The travel range of its X, Y, Z axes is 630 x 600 x 650 mm, respectively. The machine spindle rotates at 12,000 revolutions per minute. The milling machine is equipped with a magazine for forty tools with a maximum tool diameter of 150 mm, length 360 mm and a weight of 12 kg. The milling center is offered at a price with different types of holders. Technical parameters of the MORI SEIKI SH-500/40 CNC milling machine - CNC control: MORI SEIKI MSC-502 Travel range: - X axis (table travel length): 630 mm - Y axis (vertical movement of the spindle head): 600 mm - Z axis (cross table movement): 650 mm - distan ...

FMS SYSTEM; Machining Cell consisting of: Two 5-Axis Machining Centres 12-Pool Pallet System (630 mm X 630 mm); Pallet Storage System X= 750 mm, Y= 860 mm, Z= 850mm; B= 0,001°; 334 Pos. ATC Spindle Taper HSK-A100; Spindle n= 11.000; Spindle 25 kW; Feeds 32.000mm/min; Chip-conveyor; Coolant System Serial No. 1283-01 (2001) Siemens 840D; and Coolant System Serial No. 1024-98 (1999) Siemens 840C FR: À VENDRE MAINTENANTFMS SYSTEME ; 12 Pos. Piscine à palettes (630 X 630mm) ; 2x horloge MCM 5 axes CENTRE D'USINAGE/BEARBEITUNGSZENTREN/MACHINE CENTERS ; X= 750, Y= 860, Z= 850.mm ; A= .. ? ? B= 0,001° ; 334 Pos. ATC ; cône de broche HSK-A100 ; broche n= 11.000 ; broche 25 kW ; avance 32.000mm/min ; convoyeur à copeaux ; système de refroidissement n° 1283-01 (2001)Siemens 840D ; et système de refroidissement n° 1024-98 (1999)Siemens 840C

ABB IRB 2400 M2000 robotic machining cell manufactured in 2004 in Switzerland, is equipped with an ABB IRB 2400/16 6-axis industrial robot and an ABB IRC5 controller for the control of the manipulator and peripherals. The machining station has so far been configured and used for milling of allowances after thermoforming workpieces. The high-performance milling robot has an arm with a maximum reach of 1550 mm, capable of handling workpieces weighing up to 16 kg. The industrial robot achieves the best cycle performance thanks to modern technology that automatically optimises parameters and executes the programmed path regardless of speed or operating mode, even after an emergency stop or power failure. The BaseWare OS operating system is used to fully control every aspect of the machine, ensuring the highest machining accuracy is achieved. The robotic milling station is offered with  ...

KENYO VS80160 5-axis Machining center with CE Producer: Nanjing Kenyo Precision Machine Manufacture Co., Ltd YOM 2015 Simultaneously 5 axes Total Installed Capacity 22.4 kW 5-Axis vertical Milling machine for blanks up to 1000-1500kg Stroke X/Y/Z- 1600/800/800 mm Working table size 800x1800 mm Diameter of NC swivel table axle C 630 mm Rotating mass clamping force 4000 Nm Spindle clamping force: ≥ 2000 Nm Maximum mass load 2000 kg Spindle diameter 170 mm Spindle rotation angle- ± 110 Degree Tool Store Type BT40 ISO Tool magazine 24 pcs Maximum spindle rotation speed 10.000 rpm Spindle power 15 kW Ball-Screw pair HIWIN Spindle Hesheng Ball Bearings NSK Positioning accuracy ≤ X/Y/Z: 0.015 mm, C: 0.002 degree, B: 0.002 degree Repeat accuracy ≤ X/Y/Z- 0.01 mm, C:0.0015 Degree, B:0.0015 Degree Quick move: ≥ 10000 mm/min Milling speed: ≥ 1 to 8000 mm/min OC ...

Working size 4000x2000 mm

InfoTEC 6205 PRO 5 AXIS profile machining center was built in 2019 in Poland by 4CNC Sp. z o.o. The machine, designed for precision milling, drilling and cutting of workpieces made from a wide range of materials, is an excellent choice for companies with a diverse production profile. Workpieces are machined using a moveable machining station, which moves over an extended work area. This solution significantly increases production efficiency, thanks to the possibility of machining more than one workpiece at the same time. The InfoTEC PRO-X 5 AXIS aluminium profile machining center is offered with a wide range of equipment, including e.g. an advanced CNC controller, programs that facilitate daily machine operation and PANASONIC light curtains. The total weight of the machine is approximately 5800 kg. Technical specifications of the InfoTEC 6205 PRO 5 AXIS beam drill line - number of ax ...

Complete processing cell with robot and ..., IRB 4400/45kg, ABB, used Top Special price ! This system is sold for an absolute special price of only 8% of the purchase price. If you have a VAT number, we will gladly issue an invoice without VAT. Used, top condition. Due to a series end, this processing cell is free and sold. The machine will be checked by us and can be tested by us before a possible purchase. The robot was regularly serviced by ABB and had an easy process step to complete. We cannot accept any further warranty. Complete deburring cell from Protex: A workpiece is placed in the processing shaft from the outside. The part is clamped onto the fixture. The robot picks the correct tool from the tool storage location and begins processing. The built-in swivelling table can be used to rotate the workpiece and carry out a further machining step. The chips fall into a  ...

CNC Control: FANUC 31i-B Axes X-axis travel mm: 1050 Y-axis travel mm: 850 Z-axis travel mm: 970 B-axis degrees: 0.001º Distance between spindle - table top mm: 100-950 Work table Number of pallets: 2 Table dimensions mm: 630x630 Maximum part size (D x H) mm: ø1.100x1.100 Maximum weight of the piece kg: 1200 APC Time: 15.5 Spindle Spindle speed rpm: 10000 Spindle power kW: 30 (25% ED) Spindle torque Nm: 420 (25% ED) Tooling System Tool Holder: HSK-A100 Tool Magazine Positions: 90 Max. tool diameter mm: ø250 Max. tool length mm: 550 Tool-to-tool time: 2.4 Chip to chip time: 4.5 Equipment Electronic steering wheel Chip extractor Washing Gun Signal light High Pressure Pump Mist collector 4th axis RS 232 Interface Internal cooling 3D Renishaw tool probe 4x pallets Toolholders are not included Machine Run Times Hea ...

ELUMATEC SBZ 628 profile machining center was built in 2016 in Germany by elumatec AG. The machine has been regularly serviced throughout its service life. The ELUMATEC SBZ 628 profile machining centre is an extremely versatile solution for advanced machining of window profiles, door profiles or facades. It enables precision machining of any type of profile with a maximum length of 7500 mm. Cutting, drilling and milling is performed in a single work cycle by advanced machining units located inside a sound-absorbing cabin. A clamping system positions the workpiece instantly and holds it securely during the entire machining process. Grippers, spindles and a cutting disc with a 360° rotation range enable machining of the profile in multiple positions, while maintaining constant accuracy. All this is completed by the quick-change mechanism for guide rollers and tools, which considerably  ...

Excellent general condition. Used in plastic mold makers mainly for 3D graphite-carbon tool models and engraving work. Low cutting strengths, low machine load... Travel x=1200 y=800 z=500 Spindle speed 0 - 8000 rpm / Drive power main spindle 11 kW feed speed 0 - 30 m/min / table dimensions 1320 x 800mm Table load max. 2,000kg / 20-fold tool changer / max wzg diameter 63mm / WZG Long 200mm / tool holder SK 40 / 3D probe, Fabr. Heidenhain, type TS 220 / Cooling agent equipment / Spaenefoerderer / Suction (optional) Complete enclosure Heidenhain Control type TNC 426 PB digital / Electronic handwheel Heidenhain HR 410

FOM INDUSTRIE profile machining center was built in 2009 by F.O.M. INDUSTRIE s.r.l. This machine, designed for precision machining of PVC profiles, is an excellent choice for businesses specialising in the manufacture of windows. It enables, among others, milling, cutting or making ventilation and holes for the handle. Window profiles are machined by means of various types of aggregates. The standard machine in this series has 14 aggregates, however, the machine in our offer has been equipped with additional milling and drilling aggregates and has a total of 18 of them. This solution significantly increases the machining capacity of the machine as well as the overall machining efficiency. The FOM INDUSTRIE PVC profile machining center is also extremely easy to operate. All machining parameters are programmed in the intuitive CNC control with graphic software. Technical specifications  ...

Quills, processing unit, automatic drilling machine, drilling machine, standing drill, multi-spindle drilling machine -2x: quill machining units -1x: Horizontal -1x: vertical -Max. Feed: stroke mm -Speed: rpm -Built-in drill chucks: 1.5-13 mm -Dimensions: 1050/1205/H1550 mm -Weight: 222 kg

Boring head, spindle head, drill head, plunge drill head, plunge head, spindle drill head, boring head, spindle tool, facing and boring head -Manufacturer: Schmid, facing and boring head type -Recording: MK4 -Dimensions: 222/87/80 mm -Weight: 3.1 kg

machining unit, drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Manufacturer: Perske, Quill machining unit -Drive: 1.5 kW -Speed: 2800 rpm -Stroke: 55 mm -Dimensions: 720/200/H175 mm -Weight: 38 kg

Spindles, machining unit, automatic drilling machine, drilling machine, pillar drilling machine, multi-spindle drilling machine, row drilling machine, dowel drilling machine -Max. feed rate: Stroke 60 mm -Drive: 1.1 kW -Recording: 10 x 17 mm -Number: 2x quill processing units available Price: per piece -Weight: 25 kg/piece

MEPAL ATLANTIS C3SR profile machining center was built in 2018 in Italy by MEPAL Italia s.r.l (RobTech). The machine is new, stocked after purchase and has never been in operation. MEPAL ATLANTIS C3SR is an advanced CNC machining center designed for precision machining of aluminium and PVC profiles from three sides. It is designed to perform such operations, i.e. drilling and milling of workpieces with a maximum wall thickness of 2.5 mm and lengths in excess of 3 metres. All these processes are performed fully automatically in three numerically controlled axes (X,Y,Z). Inside the large work area there is a rotary work table, which is pneumatically rotatable within the range of -90°, 0° and +90°. This solution allows workpieces to be machined from different sides without having to refit the workpiece. The spindle, driven by a powerful 4.5 kW motor, reaches a speed of as much as 1800 ...

BRETON Contourbreton NC 260 K23 stone machining center was built in 2010 in Italy by Breton S.p.A.. The machine is used for the efficient machining of natural stone slabs and blocks with a maximum weight of 4000 kg. It enables a number of advanced operations to be performed, such as milling, profiling, bevelling and hole drilling. All these machining processes are performed fully automatically, while maintaining the high repeatability and quality of the manufactured parts. The reliable spindle, operating at a maximum speed of 9000 rpm, moves in three numerically-controlled axes. This enables precise positioning of the tool relative to the workpiece during the machining. All axes, driven by powerful motors, achieve a high feed rate and dynamics, which in turn translates into increased production efficiency. All of this makes the offered Contourbreton NC 260 K23 CNC machining center for ma ...

Lot 578: Toyoda 3-Axis CNC Vertical Machining Center Robust 3-Axis Vertical Machining Center Designed for stability and endurance, this 2008 Toyoda FV 1365 provides high-accuracy 3-axis CNC milling to support a wide variety of industrial metalworking applications. Technical Details ‍ 1. Machine identification data Name: CNC Vertical Machining Center Manufacturer: Toyoda Model: FV 1365 Machine number: 0831 Year of manufacture: 2010 2. Operational parameters Travel (X / Y / Z): 1300 mm / 650 mm / 600 mm Table size: 1100 x 650 mm Max. load on table: 900 kg Spindle: 18.5 kW; 6000 rpm Tool holder: BT50 Tool magazine: 30 positions Control: Fanuc 3. Weights Machine weight: 7000 kg 4. Dimensions Overall dimensions (Width x Length x Height): 3506 x 3624 x 2940 mm ‍ ‍ Disclaimer: The technical specifications provided are ...

CMA Long Bed Machining Center Model 3RD-CNC-6006 with 4th Axis The CMA 3RD long-bed machining center is the third generation of successful predecessor models that are used in a variety of ways around the world every day. The machine is designed with the latest generation of industrial PC control, servo drives and servo motors from OMRON (Japan). What does a machining center have to offer in practice? - Drilling quickly and easily in the exact position (a hole in the wrong position leads to problems, i.e. high assembly costs) - Can be used both for individual parts (manually 1 or 2 holes in a product) and for small and large series - Have the option of using both conventional HSS drills and modern carbide drills to drill faster - Be suitable for processing (several) small or large products - Be suitable for drilling, tapping, countersinking and flow drilling, among other thin ...

Zoller tool pre-setr with change adapter for index GE / GB / ER / machines as well as Gildemeister GM / Schuette lathes partly universally applicable (VDI etc) - with Heidenhein measuring device - various base holders - Measuring table Etc.

This 3-axis LAGUN L650 vertical machining centre was manufactured in 2014. It features impressive travels of 650 mm in the X-axis, 510 mm in the Y-axis, and 610 mm in the Z-axis. The machine is equipped with a 16-position automatic tool changer and a powerful 7.5 kW spindle motor. If you are looking to get high-quality machining capabilities, consider the LAGUN L650 machine we have for sale. Contact us for further details.

X-travel: 700 mm Y-travel: 550 mm Z-travel: 450 mm Control Heidenhain Atek HS Plus Spindle taper HSK 40E Spindle speed 42.000 rpm ATC 24 positions Clamping table 900 x 550 mm Weight of the machine ca. 6,5 t VIDEO: abcs://youtu.be/V4PdQu-AYcA