nua 25 used for sale

Qty. 1 Second-hand billet foundry plant Mfc.: Cometal SA Built: 1989-2008 Stopped: 2014 Billet size: Dia. 145 – 152 – 178 – 203 – 228 – 254 mm Length: 7.0 m Tolerances: Dia. + 0, -2 mm Length: +/- 30 mm Deflection: 2 mm per 1000 mm

x-280 ,y- 200 , Z 315 , Table dimensions 380x380/250x500 A lot of writings,much more than pictured

TECHNICAL DATA: Working range: 2,500 x 1,250 x 115 mm Control: Siemens Sinumerik 840 D Laser power: 2,000 watts Max sheet thickness structural steel: 20 mm Max sheet thickness stainless steel: 12 mm Max sheet thickness Aluminium: 8 mm STANDARD EQUIPMENT: â?¢ Closed machine frame with integrated laser unit â?¢ TRUMPF laser TLF 2000 â?¢ Laser unit: CO2 laser, high-frequency excited, cooling unit, logbook function â?¢ Automatic pallet changer and laengsfoerder tape â?¢ Drives: maintenance-free three-phase servo motors â?¢ Laser power control â?¢ HI-LAS high-pressure cutting â?¢ Plasma sensors PMS â?¢ Fast processing with SprintLas â?¢ ContourLas for the production of small loechers â?¢ Cutting gas pressure adjustment programmable â?¢ La ...

Zum Verkauf steht ein Fräskopf bei der Firma Pfauter ca.2012 komplett überholt.

Two used ABB BBC turbochargers ABB VTR 254-11 HT:398345 HT:398344 Turbochargers still need to be tested and assembled ! Both turbochargers are disassembled on request I send them photos !

1 BENZ laboratory jigger type LJ 250 TM, roller width 230 mm

For sale complete plant for wood pellet production, made from CPM, capacity 6t/h. A most of the maschines from line are produced in between 2008-2010.y., except presses for making pellets (its bit older then rest of the line, but completly renewed before restarting. Line is consisting from: 1.Chain conveyer for logs transport. 2.Lift with angle platform for dosing material. 3.Entrance belt transporter with magnetic section for detection of iron. 4.Grinder (hammer mill) BRUKS 500kW 5.Verticaly basket transporter for chip wood. 6.Horisontal belt transporter for chip wood with three side ejectors into depoos (separated with type of the wood) 7.Hidraulic floor platform for dosing wood chips (three pcs.) with all instalation and system of hidraulic pistons. 8.Horisontal belt transporter for transportation material on drying. 9.Repler transporter for driving wood chips into fire plac ...

Gardner Denver/Rietschle CLFEH 251 V with 7.5 KW AC-Motor, 250 m3/h, Final pressure: - 10 mbar, completely overhauled with all wearing parts, 1 year warranty

Becker rotary vane vacuum pump VTLF 2.250/0-79 with 5.5 KW DS motor, 250 m3/h, final pressure: - 800 mbar, completely overhauled with all wearing parts, 1 year warranty

200 ml bottle form set with shampoo nut

Inv. Num. : 6238 Type: HIT-250 MS Producer: HYUNDAI Created: 2004 Parameters: Control system: Siemens Sinumerik 840D turning length: 650 mm turning diameter: 390 mm Maximum turning diameter over bed: 590 mm Maximum spindle speed: 3600 1/min Maximum main spindle power: 15 kW Spindle passage: 80 mm Number of all tools: 12 pieces Number of driven tools in the turret head: 12 pieces Chuck diameter: 250 mm Axis X: 265 mm Axis Z: 660 mm Clamping diameter (counter spindle): 160 mm Spindle passage (counter spindle): 50 mm speed (counter spindle): 4500 1/min Length: 3692 mm Width: 1850 mm Height: 1850 mm Weight: 6450 kg Equipment: C-axis Technical documentation Conveyor Driven tools 2x 3-jaw chuck Cooling Complete coverage of the work area Oil mist separators Housing for clamping rotary knives and cases (8 pcs.)

Manufacturer: Grundfos Number: 2 Model: NB 100-250/245 A-F-A-BAQE Built: 2008 Rated flow current: 148 m3/h Nominal head: 18.1 m Speed: 1460 rpm Pressure: 16 bar Temperature range: 0-120°C Power: 11 kW The pumps never went into operation after installation and are therefore virtually unused. Technical specifications and data sheets are available and will be sent on request. The pumps can be purchased individually as well as in the complete package.

Offset downforce, VNK2A 251, 6-49Nm, Bosch Rexroth, new As good as new in original packaging! The high quality part comes from a spare parts warehouse of a mechanical processing of a large car manufacturer, is completely as new and in the original packaging. Tool holder 1/2" square 6-49Nm, Max. 1000rpm Maintenance free for 1 million full load cycles Rexroth No. 0608800633 For screw solutions Function guarantee! For second hand parts, we can not provide conventional warranty and guarantee. However, we give you a functional guarantee. If the device does not work in the course of commissioning, you can return the goods and we will refund the purchase price.

Max. diameter of initial blank: 30 mm Blank length: -Min.: 120 mm -Max.: 300 mm Max. diameter of upset flange: 60 mm Upset slide nominal force: 2500 kN Max. force on clamping slide with dies closed: 2500 kN Stroke: -Movable die: 100 mm -Upset slide (full): 220 mm -Die closing: 140 mm Slide strokes per minute: 45 Machine overall dimensions: -Length: 6050 mm -Width: 4600 mm -Height: 2260 mm Machine weight: 24680 kg

:::SPECIFICATIONS::: CNC Model: Okuma OSP CNC version: U100 - L Spindle nose: ASA 6 Spindle power: 22Kw Main spindle revolutions: 5000 Turning diameter: 630mm Bar clearance: 51mm Turning length: 1170mm Number of tools: 44 Tool connection: HSK 63 Spindle power: 7,7Kw Number of spindle revolutions: 6000 X Axis Stroke: 475mm Y axis stroke: + - 80mm Z Axis Stroke: 1155mm Swivel B-axis travel: 0.001degree Rapid feeds linear axes X Y Z: 40m/min High cooling pressure: yes Pressure value: 120bar System with external tank with filter: yes Number of Tool Turrets: 1 Number of tool places before turret: 12 First turret tool attachment type: VDI Counter-spindle: yes Number of counter-spindle revolutions: 6000 Counterspindle power: 22Kw Bar clearance: 32mm Z stroke counterspindle : 1180mm Model and brand bar magazin ...

Aluminium format slide (anodized) with hardened Steel guide rods. Non-return protection at thickness planer. Anodized parallel fence with micrometric fine adjustment. Inclined adjustment of the saw blade up to 45° by means of a hand wheel. Table opening ø190 mm with undercounter extraction. Milling stop 180 mm. Built-in milling spindle lock. Layout table with telescopic stop, Eccentric clamp, degree grid made in EU ! Dressing unit: Table width 410 mm Table length 1800 mm Planer shaft diameter 100 mm Number of planing knives 4 pieces Shaft speed 5000 Motor output power 5 kW S6 400V (4kW S1) Thickness unit: Thickness passage, min/max 4 - 230 mm Feed speed 7m/min Milling machine: Usable length of the spindle 125 mm Spindle height adjustment 160 mm tool diameter for profiling 180 mm for tenon cutting 250 mm Spindle speed 8000/6000/3500/1400 Table openings 1 ...

PVC - heating / cooling mixing combination Hot mixer 750 ltr. / Cooling mixer 2,500 l. Engine power: 212 + 45 kW

250 Ton x 5100mm Over Bed CNC Press Brake. Admitting 4500mm Between Side Frames. 3000mm Long Heavy Duty Back Gauge. Including Cybelec DNC 800 8 axis control. (Y1, Y2, X1, X2, Z1, Z2, R1, R2) Auto Crowing. Infra-Red Operator Guards. Hydraulic Top Tool Clamping. Side & Rear Safety Fences. Tooling Carousel. S/No 97P288. New 1997

NEW ex works semi-automatic chamfering machine Development and production in England - automatic chuck with material sensor - Automatic spindle start when the cutting head is moved - Max. speed 1,500 rpm - max. rod diameter 80 mm - Adjustable bar flag - max. chamfering/turning length 37 mm - Incl. turning and chamfering tool - Precision three-jaw chuck - large chip collection container for easy cleaning - easy to move with pallet trucks - Weight 500 kg Dimensions L/W/H 800x500x1250 mm 1 year warranty CE - certified OPTION: - Oil cooling (fog) € 1.850,- - adjustable stop + universal chamfering tool € 1.650,-

Motor control card Bendingroller for TBA / 8 ASU

MOBILE RAUCHSANLAGE With the LAS 250 suction and filter system, the air can be cleaned directly at the workplace. In this way, nuisances and harmful effects from unpleasant odours are avoided. Due to the high filter performance, up to 2 workstations can be equipped. Characteristics: Low noise level Adjustable volumetric flow controller High-performance fans with minimal energy consumption Recyclable filter with high capacity Easy operation, maintenance and filter change Two ways to suck out the contaminated air: suction arm with attachment or hose (must be ordered separately from the manufacturer) Suction flange: 2 pieces for suction hose, diameter 50 mm Durable, brushless electric motor Throughput: 250 m3/h (8,829 ft3/h) Power: 0.37 kW (0.5 hp) Manufacturer: LOCTITE Type: LAS 250 All information without guarantee

Electric shrink tunnel 12 Electric thermal tube Electrical: 3 Phase, 24 kWt Weight: 420kg - 3-step heat isolation design for energy saving and operator protection. - Digital control, internal circulation keeps temperature consistent and shrinking effect perfect. - Equipped with high-level VFD(Variable Frequency Drive) that makes controlling of wind speed easy. - Unique wind board design makes controlling of wind direction easy and flexible, able to adapt to different bottles. - Durable electric heater tube ensures efficient heating. - Panel is embedded to prevent operators changing setting accidentally. - Heating can be stopped immediately, or maintained by time

Alligator scissors TR250: • Four-sided knives usable • Opening width is continuously controlled via foot pedal Technical data: Total dimensions: 1100 x 700 x 1200 mm Total weight: approx. 350 kg Knife length: 250 mm Max. knife opening: 150 mm Cutting force: 350 kN Cutting power: Round iron 22 mm (ST 37) Main drive: 3 phases: 4 kW (5.5 hp) Cutting strokes p/min: up to 17 / min

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally stiff shell construction • Er ...

UNICRAFT-Hand Pallet Truck-PHW-2508 Product name: PHW professional pallet truck Manafacture: Unicraft Item number: 6152512 Year of construction: 05/2023 Serial Number: 121098013092 Technical details: • Load capacity: 2.5 t • Carrying width: 540 mm • Fork width: 160 mm • Fork length: 1,150 mm • min. fork height: 85 mm • max. fork height: 200 mm • Turning radius: 1,281 mm • Steering angle: 205° • Diameter swivel castors: 200 mm • Swivel castor width: 50 mm • Diameter fork rollers: 80 mm • Fork roller width: 70 mm • Dimensions (LxWxH): 1,550 x 540 x 1,235 mm • Weight: 67 kg • Stable, robust quality • Fully hydraulic lifting and lowering device • Hydraulic pump with hard chrome-plated piston and pressure relief valve • Lowering speed infinitely adjustable via drain valve • Frame and fork in very stable and torsionally sti ...

Radial drill Soraluce TR3-2500mm. 2500mm arm. Drilling in steel: 80mm. Drilling in cast iron: 100mm. Chuck spindle diameter: 110mm. Cone Morse 6. Speeds: 16 (20-1475rpm). Engine power: 10hp.

Continuously working melt filter New and unused machine Visit possible by arrangement.

Make: Fryma Line ML 250 / MZ 250 for soy milling, production of soy milk Perforated disc mill: 45 kW Colloid mill: 60 kW Capacity: approx. 7000 l/h (soy milk) Dimensions LWH: 1700 x 1500 x 1550 mm Weight: approx. 1100 kg

4 pcs Bronze guide bush - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm from Oleopress and Idra. Weight approx. 20 kg - Outside diameter 271/278/265mm - Inner diameter 250mm - Tube length 275mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

4 pcs. Bronze collar bushing - column die-casting machine, D 250mm, Idra, Oleopress, new Special price - You only pay the raw material costs! We still have several identical and other such devices, but the amount is ending. Buy more than 1 piece, there is still a great discount. If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition! The part was bought from a spare parts warehouse of a company, has never been in operation, is in a completely mint condition. Suitable for the columns of the die-casting machines D 250mm of the company Oleopress and Idra. Weight appr. 20 kg - Outside diameter 278/271mm - Inner diameter 250mm - Tube length 250mm Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D30 ...

Aflösebehälter Zettelmeier -Content 250 litres -Built in 2012 -Power 12 kW -Stainless steel -with drain tap

Dough kneading machine W&P DK 250 with 2 boilers -Double cone kneader type DK 250 -for max. 400 kg dough or 250 kg flour -with base plate

Cutting area round: 250 mm Cutting area rectangular: 250 mm Saw band dimensions: 3660 x 25 x 0.9 mm Band speed: 20 - 70 m/min Saw drive: 1 kW Space requirement: 1900 x 1450 x 1250 mm Weight: approx. 850 kg

Conventional or NC - controlled heavy electrohydraulic sheet metal bending machine (swing bending machine) of excellent quality Largest bending length 2,540 mm, vertical particularly stiff upper cheek - largest bending angle 100° - electric motor bending cheek drive (one motor left + right each) - hydraulic upper cheek movement with synchronisation control - largest opening width 230 mm, Working table height 870 mm, drive power hydraulics 4 kW - drive power bending cheek 2 x 1.5 kW, dimensions without rear stop 3.6 m x 1 m x H 2.15 m, weight without rear stop 4,300 kg

Robust, high-quality rotary device for cylindrical workpieces (boiler roller set), steel rollers coated with polyurethane, infinitely adjustable rotation speed, high frequency protected, right and left run Largest load capacity of the two units together 5,000 kg, workpiece diameter 200 mm to 3,000 mm, drive power 2 x 0.37 kW, drive rollers made of steel of 250 x 80 mm, rotation speed 80 – 1,200 mm/min, maximum temperature load capacity of the rollers up to 110° C, dimensions see figures, weight of the set (driven and non-driven unit together) approx. 230 kg

Complete precision ball screw drive with bearings, stroke 308mm, 25x5/25, Rexroth, new Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Mint condition in original packaging! The part was purchased from a spare parts warehouse of a company and has never been in operation, is in a completely mint condition and in its original packaging. Complete precision ball screw with pillow block and floating bearing, thread diameter 25mm x 5mm ball screw Plummer block Rexroth: R159161720 Plummer block Rexroth: R159111720 Ball screw nut with part holder: R150321085 Total 496 x 110 x 72mm Maximum stroke: 308mm Function guarantee! For second hand parts, we can not accept any conventional guarantee and warranty. But we give you a functional guarantee. If the device does not work within 3 months after purchase you can return the goods and we wi ...

20167 ZF BW 251 - 4.792:1 A 0.346 KW/RPM Brand Gearbox ZF Model Gearbox BW 251A Ratio 4.792:1 A Power 0.346 KW/RPM RPM 1800 RPM Serial Number 3815 General condition Taken out running condition With Flexible Coupling With SAE Housing With Controls Mechanical With Mounting Brackets SAE 0 Weight (kg) 880 Dimensions (cm) 100 x 105 x110

Replacement columns for die-casting machine OL1500, D250x12, Oleopress, used - overhauled Special price! Attention: The current new price is certainly twice as high. In addition, we also have a new spar nut and 2 adjusting nuts in separate adverts. If you have a VAT number, we will be happy to issue you with an invoice without VAT. Second hand! The part was bought from a spare parts store of a company, it was overhouled by a specialist company, is in a very good condition and fully functional. Attention: We have not cleaned the column yet, as the fat layer is optimal for storage. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 12mm Thread fixed end 300mm lg Thread adjustable end 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250 ...

Slideways for die-casting machine, 2580 x 125 x 25mm, Idra, Oleopress, new The new slideways from Olepress / OP die casting come from a spare parts stock of an aluminium die casting company. They fit die casting machines like Olepress, Idra and others. See dimensions Slideways, slide rails for aluminium die casting machines, case hardened steel. The bronze bars of the die casting tables slide on these slide rails. 2580 x 125 x 25mm, bores 4 x D20/14 x 2540 x 90 If you have a UID number, we will gladly issue an invoice without VAT. You are welcome to inspect and check the goods at our premises in Austria, 3130 Herzogenburg.

Replacement columns for die-casting machine OL1600, D250x14, Idra, new -50% Special price! Attention: The current new price is certainly twice as high. If you have a VAT number, we will be happy to issue you an invoice without VAT. As good as new in original packaging! The part was bought from a spare parts store of a company and has never been in use, is completely as new and in the original packaging. Material 25CrMo4 Manufacturer Olepress / O.P. DIE Casting Thread 250 x 14 mm, L 5908 mm, Thread fixed end 290mm lg Thread adjustable end ca. 1160mm lg Weight approx. 2300 kg Attention: We offer various columns, adjusting nuts, tie bar expansion nuts and 2-piece nuts from: IDRA D330, D300, D260, D250, Oleopress/OP Die Casting: D285, D250, Frech: D375, D330, D300

IROP Autoclave 6.25m long x 1.5m diam. Heating – Electric and steam For heating, works with three options (1 – Only electric with resistances; 2 – Only water steam; 3 – Electric + water steam). 165ºC calculation temperature Working pressure – 6 bar Test pressure – 7.5 bar Manufacturer – IROP Insurance certificate– (last technical inspection 12/08/2020; validity 12/08/2026) Year manufacture – 1976 There is a fan inside at the back. The fan sucks air from the centre and blows heated air through the wall. Around the fan there are 6 electric resistances for heating, also a circular tubular for water steam. The air passes though heating elements and rises the temperature. Total electric power – 50 kW. Last in use – March 2023

Qty. 1 Second-hand crank hot forging press – dismantled & in storage Mfc.: Hyunjin Industry, Korea Built: 2008 Status: dismantled and in storage Force: 2500 T Total weight of the machinery: approx. 250 T

The laser WUXI CHEERON QY-LC1500-2540 FIBER was produced in 2020 by the brand Wuxi Cheeron Qingyuan Laser Technology Co. The machine is new, it was only included for a test run after the purchase. The machine uses an IPG Photonics (Germany) laser source. The 3-axis fiber optic laser cutter has a power of 1500 W and a large working area of ​​4000 x 2500 mm. The modern design of the laser guarantees many processing possibilities, thanks to the fact that it is equipped with two automatic sheet metal loading tables, a cutting chamber, a large LCD screen, and extensive equipment. Laser technical parameters: - two automatic feeding tables: 4000 x 2500 mm - cutting working surface: 4000 x 2500 mm - closed, illuminated cutting chamber, with strong gas extraction - HD cameras for viewing in the cutting chamber and external viewing of loading tables - a closed container with a control  ...

Key data: 200 , 250 , 400

Emergency power system NSA as a backup power system with a nominal output of 250 kVA with FPT Iveco engine C 87 TE 3 F, parallel to the grid with IG 200 Engine manufacturer: Iveco FPT Engine Model: C 87 TE 3 F Engine No.: 457199 Engine power: 262 KW Cooling: Water-cooled Tempering: Electric 24 V DC Speed: 1500 rpm Fuel: Fuel oil EN 590 or diesel B 7 Technical data generator: Generator manufacturer: Stamford AvK Generator type: UCDI 274 K Gene. Item no.: C22G293710 Generator power: 250 kVA Voltage: 400 / 231 volts Power factor: cos. - PHI 0.8 Speed: 1500 rpm Switchgear: Version: Automatic start Functions: Emergency power operation Switch: Generator switch 3 poles Delivery: Assembled Tank: Base frame tank with drip pan Capacity / litre: 450 Dimensions of the power unit: Width approx. mm: 1.400  ...

Coarse grinder Palmia 255 Category Used meat processing machines Subcategory Mechanical Tratment of Meat Type Grinders / Mincers Height 1700 Width 860 mm Length 1500 mm Voltage Electrical: 400V 50Hz 3N Installed Power 12 kw Main material Stainlees Steel Time of realisation in stock Loader No Loader, possibility to buy a separate loader Throat Diameter 280 mm Grinder Type Feeding System Hooper Throat Material Stainless Steel Auger Material Cast Iron

High-performance deburring system for internal and external deburring of profiles and tubes in a single operation (approx. 3 sec.) Powerful industrial geared three-phase motor, frequency-controlled, for infinitely variable settings of the required speed: 600 - 2,700 1/min, for deburring pipes and profiles with material dimensions horizontal/vertical 120 mm, Easily adjustable work table height (adjustable and lockable) for the appropriate material size adjustable, lockable infeed (carriage) of the deburring brushes to the work table by means of a handwheel with locking function. Drawer for dust residues. Sheet steel housing with prepared for connection to an external extraction system. Housing hoods foldable for changing the brushes. Machine body RAL 7035 Side cover: RAL 7005 1 set of machine feet with adjustment screw. 3 deburring round brushes 250 x 60 / 0.35 mm corrugated st ...