nua 25 used for sale

Manufacturer: Cefla, Type: TR 2500, Year: 1999, Length mm: 2500, Working widht mm: 1400, Drive power kW: 0,26, Year :1999

Manufacturer: Bürstenschleifmaschine, Type: 250 mm, Number of units: 2, Working widht mm: 250 , Diameter of brushes: 280, Units mounted upright: yes, Fast exchange device: yes, kW output motor: 1,5,

Manufacturer: Becker, Type: SV.5,250/1, revolutions rpm: 2800, Final sealing pressure mbar: 190/200, Drive power kW: ca.3,

Manufacturer: Höcker, Type: K 35/250 Späneventilator, Year: 03/2004, Engine power kW: 18,5, Flow rate approx. m3/h: 5700, rotations rpm: 1500, V-belt drive motor: yes, V-belt pulley impeller: yes, Suction side mm: 250, Outlet side mm: 350, Wight approx. kg: 420, Year :03/2004

Flat belt pulley, toothed pulley, multi-belt pulley, timing belt pulley -Timing belt pulley: Ø 87 mm -Type: 32-8M-50 -Number of teeth: 32 teeth / Belt width: 50 mm -Mount: Taper clamping bushing: optibelt 1615-30 Ø 32 x 38 mm -Quantity: 1x timing belt pulley included -Dimensions: Ø 87 x 60 mm -Weight: 1.3 kg

Square, locksmithsquare, hair square, precision hair square -Angle stop: Leg length 510 x 250 mm -Dimensions: 510/250/H40 mm -Weight: 2.3 kg

GeneralCNC Turning Centre; Control: CELOS with Siemens 840D sl Operate Working areaSwing diameter over guide ways710 mmClamping chuck diameter max.315 mmLongitudinal stroke1345 mmTransverse stroke260 mmWork spindle (left)Spindle bore91 mmSpindle diametre on front bearing140 mmMain drive 1Drive power (100% DC)22 kWSpeed range- 4000 rpmTorque (100% DC)410 NmMax. torque (40% DC)525 NmAccuracy at point stopping0,001 degreeTool holder 1Number of tool stations12 Shank diametre according to DIN 6988040 mmNumber of driven tools12 Speed max.-6000 rpmPower max. (100% DC)10 kWFloor space/WeightWeight approx.7800 KgDimensions (L x W x H)5,4 x 2,07 x 2,6 mPlug-in board with 2x4 free in-/outputsInputs / outputs programmable via M-functions, consisting of: 8 inputs 4 outputs, 2 amperes 4 outputs, potential-freeExcentric turning and milling operationExcentric turning and milling operation (only with Sie ...

BACCI FC 8 2500 linear milling machine Working length 2500mm Working width 200mm Working height 180mm Number of units 8 Milling 7.5kw Milling 7.5kw Milling 5.5kw Milling 5.5kw Grinding/milling 4.5/3.3kw Grinding/milling 4.5/3.3kw Sanding 3kw Sanding 3kw Hydraulic feed Working speed 0-15m/min Return speed 50-100m/min Year of production 2004 CE Certified Machine weight 5100kg

Stop square, locksmith square, control square -Angle stop: Leg length 355 x 250 mm -Quantity: 3x angle brackets available -Price: per piece -Dimensions: 400/250/H25 mm -Weight: 2.7 kg/pc.

Square, locksmith square, hair square, precision hair square -Angle stop: Leg length 250 x 160 mm -Quantity: 1x angle stop available -Dimensions: 255/160/H22 mm -Weight: 0.5 kg

GENERAL Project No.: 905722 Quantity: 1 pcs. Manufacturer: MORI SEIKI Type: SL 2500 Y/650 Control: MSG-805 L MAPPS Year of Make: 2003 Condition: Used machine DESCRIPTION TURN Max. turning diameter 356 mm Max. turning length 655 mm Max. circumferential diameter over bed 520 mm Max. rotation diameter over face slide 250 mm Max. circumferential diameter over bed cover 755 mm Max. speed main spindle 4500 1/min Max. power main spindle at ED 10-40/100% 18 kW Spindle passage main spindle 75 mm Spindle Flange Size Main Spindle A2-8 Axes on the main spindle unit C Hollow clamping cylinder on the main spindle Tailstock NC-controlled 1 turret on top Number of stations/powered by 12/12 Speed tool drive 6000 1/min Axles in the turret X/Y/Z Travel in X/Y/Z 160/120/590 mm Max. rapid traverse speed in X/Y/Z 18/-/24 m/min OTHER EQUIPMENT Tool life monitoring Spla ...

max. wheel diameter: 400 mm gear width: 275 mm gear width: 275 mm max. module: 6 weight of the machine ca.: 5,5 t shifting: 100 mm dist. cutter spindle - workpiece spindle: 40/265 mm hob turning speeds: 50-400 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

with remoweble bowl

grinding diameter: 420 mm grinding length: 2500 mm swing diameter: 870 mm centre distance: 2700 mm workpiece turning speeds: 1-164 U/min total power requirement: 50 kW weight of the machine ca.: t dimensions of the machine ca.: m The tech. Data are manufacturer or operator information and therefore non- binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hydraulic cylinder, support cylinder, hydraulic piston, pressure piston -Hydraulic cylinder: double-acting, stroke 250 mm -Piston rod: Ø 25 mm -Hole: Ø 25/19 mm -Pitch spacing: retracted 465 mm -Number: 2 cylinders available -Price: per piece -Dimensions: 530/60/H73 mm -Weight: 5.9 kg/pc.

Manufacturer: NESTRO Model: NE 250 J Year of Manufacture: 2023 Type of Machine: Dust Extractor Operating hours: 551.3 h Technical Specifications - Rated Airflow Volume: 2,950 m³/h - Rated Negative Pressure: 2,526 Pa - Filter Area: 22.4 m² - Connection Diameter (Suction Port): 250 mm - Weight: 930 kg - Max. Compressed Air Pressure: 8 bar - Motor Power: 5.5 kW - Operating Voltage: 400 V - Rated Speed: 3,000 rpm - Rated Current: 9.5 A - Frequency: 50 Hz Find more here - / Contact us at -

Bracket, holder, support block, retaining support -Bracket: Mounting plate -Hole: Ø 15 mm -Dimensions: see photos -Dimensions: 260/210/H70 mm -Weight: 29.5 kg

Power supply, power supply unit, ballast, driver Manufacturer: GIB Lighting, ballast -Type: Pro-VT 250W -Quantity: 10x ballasts available -Price: per piece -Dimensions: 185/90/H80 mm -Weight: 3.7 kg/pc.

Workbench, work table, assembly bench, assembly table, work table -Manufacturer: KLW Lutz, workbench / solid worktop with base cabinets -Worktop: 2500/700/H850 mm -2x drawer cabinet: 2 drawers, layout/height see photos -Transport dimensions: 2500/700/H855 mm -Weight: 152 kg

With C and Y axis Max. workpiece diameter 366 mm Max. workpiece length 708 mm Max. bar capacity diameter 105 mm Max. X-axis stroke 260 mm Max. Y-axis stroke 120 mm Max. Z-axis stroke 795 mm Controller Siemens

DC shunt motor 138 kW with tachogenerator and external fan Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP23

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 30° 12 mm -Square: 80 x 80 mm -Length: 2500 mm -Weight: 120 kg

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 5/8/9/12 mm -Square: 54 x 45 mm -Length: 2550 mm -Weight: 70 kg

Three-jaw chuck, three-jaw lathe chuck -Three-jaw chuck: Clamping aid -Clamping plate -Mouth size: Ø 255 mm -Weight: 20 kg

Pipe heating device, pipe burner, pipeline construction burner -Max. diameter: 250 mm -Burner for steel pipeline construction -Propane -Transport crate -Dimensions: 600/1400/H330 mm -Weight: 90 kg

Two-jaw chuck, 2-jaw chuck, vise, faceplate -Mouth size: Ø 250 mm -exciting: centric -Replaceable jaws: soft -Weight: 22 kg

DC shunt motor 138 kW Armature 460 V 325 Amp Field 340 V 4.7 Amp 1880 rpm IP 23

Max pressure: 250 ton Table size: 620 x 600 mm Between columns: 620 mm Max opening: 500 mm Lower and upper table are heated Max temperature: 200° C Height: 2600 mm Weight: 6 ton

CNC Machining Center Weeke Homag Optimat BHC 250 Masch. No. 0-250-08-1834 Year of manufacture 2004 Kleies machining center in good mechanical condition. Ideal for kitchen and cabinet production. No collisions. No repairs in the last 15 years. Rock solid machine that never caused any problems. Dimensions set-up: approx. 5.4 x 3.5 m Light barrier as safety No unevenness due to step mats Electric cabinet with fan Milling spindle air-cooled. Incl. 2 slide end mills. Z maximum 55mm Various drill bits: 3 mm, 5 mm, 8 mm, 15 mm, 35 mm. Grooving saw in X. Changer 5 places. Processing dimensions: approx. 2.19 x 0.92 m 100 m3 vacuum pump Inspection possible, but the machine is no longer connected. The computer "PC" must be replaced, as it no longer starts. Replacement costs estimated at approx. EUR 6,000.00. Otherwise, the machine is in very good condition. If yo ...

Key data: 200 KW, 250 kVA, 400 V

The Electroquell 250 kVA (200 kW) generator is suitable as a main or backup power source in factories, hospitals and public facilities. The Ricardo engine ensures high performance. Ricardo Euro V-engine ComAp IL-NT AMF25 controller Brushless alternator Weatherproof housing made of Al.-Zn. sheet metal Drip pan Engine heating Power: 250 kVA / 200 kW Voltage: 400 V Current: approx. 361 A Large capacity fuel tank Additional options: ATS, remote control, enlarged tank Warranty: up to 60 months

Reversible clamp, rotary table, rotary indexing table, rotary table, dividing head, dividing head, rotary indexing table -Model: HW 250 -Can be opened on one side -Angle display -Clamping surface: Ø 250 mm -braked -Dimensions: 300/500/H300 mm -Weight: 40 kg

charge load: 135 liter : 1220 mm tank diameter / tank height: 1.220 / 1035 mm : 304 mm motor capacity: 0,75 kW motor speeds:: 1500 U/min voltage: 400 V weight of the machine ca.: 600 kg dimensions of the machine ca.: 1,38 x 1,28 x 1,04 m Dryer - Serial-No.: 15772 / 96-08 - Machine ON: 44.854 h - Heat unit The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Find more here - / Contact us at -

Bending tool, die, lower knife, lower tool, prism tool -Tool: for press brake -Prisms: 90° 12 mm -Prisms: 90° 10 mm -Tool: shared -Tool dimensions: 30 x 90 mm -Tool total length: 2500 mm -Rail length: 2500 mm -Weight: 95 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25/H25 mm -Weight: 1 kg

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Turning tool inclination: 107.5° -Dimensions: 150/30/H25 mm -Weight: 0.7 kg

capacity 90 degrees: round: 110 mm capacity 90 degrees: flat: 255x160 mm capacity 90 degrees: square: 210x210 mm capacity 45 degrees: round: 160 mm capacity 45 degrees: flat: 165x110 mm cutting range 45 degree right side: square: 150x150 mm cutting speed: 11/13/17/22/26/34 m/min stroke speeds: 50/64/82/100/128/164 Hübe/min dimensions of saw-blade: 400x36x2 mm power requirement: 1,8 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Micrometer screws -Measuring range: 225-250 mm -One rotation of the drum corresponds to: 0.5 mm -with locking device -Measuring force: Ratchet -Hand protection -Quantity: other sizes also available -Weight: 2.5 kg

Pallet racking, heavy-duty racking, high-bay racking, boltless racking, warehouse racking uprights -Depth: 500 mm -Height: 2500 mm -Quantity: 3x stands -Price: complete -Stands only, no crossbars -Weight: 50 kg

Stainless steel tanks Manufacturer: Becker Tankbau Capacity 14.250 litres Cylindrical stainless steel container, single-walled, no agitator Diameter 2.40 m, total height approx. 4.10 m

swing diameter: 640 mm max. turning passage: 640 mm control: Simens 840 D Powerline - - - - - Main spindle - - - - -: - - - - - - bar material dia.: 65 mm chuck diameter: 200 - 315 mm spindle bore diameter: 80 mm diam. of main spindle in forward position: 120 mm --- Subspindle ---: - - - - - - bar material dia.: 65 mm chuck diameter: 315 mm spindle bore diameter: 80 mm forward bearing diameter: 120 mm - - - - - General data - - - - -: - - - - - - spindle distance: 1.500 mm turning length: 1.185 mm Main-/Counter -spindle turning speeds: 5.000 U/min driven tools turning speeds: 12.000 U/min Slide cross: X1, Y1: 550 / 180 mm Slide cross: Z1: 1.185 mm Slide cross: B1: 240 ° Slide cross: X2: 180 mm Slide cross: Z2: 1.050 mm Slide cross: Z3: 1.150 mm CNC Turning- and Milling Center | DMG GILDEMEISTER - GMX 250 linear equipped with main/counter spindle, chip conveyor, tool changer, a turret fo ...

Turning tool with indexable cutting jaws, clamping holder, turning tool, indexable insert holder, turning tool, indexable insert tool -Dimensions: 150/25 mm Price: per piece -Quantity: 1 available -Weight: 1 kg

Diaphragm valve DN40, plastic diaphragm valve 2/2 way -Type: 677 25D 0 1142 -Max. pressure: 6 bar -Weight: 1.6 kg

Machine vice, vise -Jaw width: 250 mm -Jaw height: approx. 80 mm -Clamping depth: max. 310 mm -Weight: 120 kg

Turning tool with indexable cutting jaws, tool holder, turning tool, indexable insert holder, turning tool, indexable insert steel -Dimensions: 150/25 mm -Price: per piece -Number: 2x available -with: 20x Widia plates each -Weight: 1 kg

Offer 24236 Specifications: - max. working width 2550 mm - max. cutting capacity St 40 4.0 mm - Cutting angle 1.30 ° - Positioning-controlled back gauge 20 - 750 mm - Front angle stop + support arms - E. footswitch - Stroke rate up to 34 rpm depending on cutting length - Drive 400 V / 3 kW - Table height approx. 850 mm - Space required including back gauge, without front support arms -ca. W 3250 x H 1250 x D 2000 mm - Weight approx. 3500 kg

Rotary table, rotary indexing table, dividing head, dividing head -Clamping surface: Ø 250 mm -Groove: 20 mm -Height: 108 mm -Dimensions: 580/350/H120 mm -Weight: 36 kg

Power distribution box, construction site power distribution box, connection cabinet -Assembly -NFI circuit breaker -Main fuse -1x socket: 63 A -Dimensions: 550/550/H850 mm -Weight: 20 kg

Key data: 275 mm, 4000 1/min

Mori Seiki NL 2500 SY / 1250 CNC lathe with Y-axis, driven tools and 2nd spindle CNC control MSX-850-lll (mitsubishi 720 BM) Turning diameter 275 /366 mm Spindle bore diameter 80 mm Spindle speed 4000 rpm Spindle motor 18.5/15 Kw X-axis travel 260 mm Y-axis travel +50 / -50 mm Travel Z-axis: 1345 mm Travel of the W-axis (sub-spindle to main spindle) 1275 mm Min. indexing C-axis main spindle 0.001° Number of tools on the turret 12x Number of driven tools 12 x Tool cone BMT Bar Feeder LNS Quick Load Servo lll Spindle-motor-driven tools 6000 U/ If you have any questions about the machine, as well as an appointment for a viewing, please contact us by phone or e-mail. Feel free to check out our other ads for a full overview of our stock.