nua 25 used for sale

Inv. Num. : 7287 Type: KGS- 250 AHD Producer: KENT Created: 2001 Parameters: Work table length: 540 mm Work table width: 260 mm Machine weight: 1300 kg

; Gross weight [kg]: 2760; Engine: Rehlko KD83L06T-AA56B; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: coolant heater and battery charger; Water Tank Volume [l]: 344

Lippert belt conveyor GF 2500-750-600 RA2261 Technical data: Conveyor length (NL): 2500 mm Frame width (NB): approx. 700 mm Belt width (GuB): 600 mm Overall height (BH): 105 mm Support feet optionally available Conveyor speed (v m/s): please contact us Drive: SEW geared motor Electrical data: 50Hz V380-500, kW 0.37 / S1 Return pulley (UR): Ø = 81 mm Drive drum (AT): Ø = 81 mm Optionally available: Supports Side guides Frequency converter for stepless speed control Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2015 condition: good (used) Conveying length in mm: 2500 Nominal / outside width in mm: 750 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive KW: 0,37/S1 Conveyor speed m / s: bitte Kontaktieren scope of delivery: without supports and side guides Für eine individuelle, fachmännische Beratung setzten S ...

Inv. Num. : 6599 Type: MG 12001 25PrP Producer: Microstep Created: 2007 Parameters: Plasma source: 2x Fine Focus 800 (300 A) Portal width: 2500 mm Equipment: 3 burners Cable Automatic controller Cooling unit Incidentals

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DSBC-40-250-PPSA-N3 -Stroke travel: 250 mm -Piston: Ø 40 mm -Piston rod: Ø 16 mm -Dimensions: 610/55/H55 mm -Weight: 2.2 kg

Key data: 690 mm, 400 mm, 500 mm

Universal milling machine from WMW, type FW Good general condition Mechanically flawless function Milling Machine - Horizontal Make:WMW Fritz Heckert Type: FW 250x1000/2 Year of construction: approx. 1980 Control Type: Conventional Freight base: ex-site, freely loaded Location: 17034 Neubrandenburg Shipping time: immediately Price: 2,800 net free loading Technical details: x-travel: 690 mm Y-travel: 400 mm z-travel: 500 mm Table Mounting Surface:: 1250x250 max. table load: 1500 kg Spindle speeds:: 18 steps/step 55-2800 rpm Height above floor: 1350 mm Feed rate: 10-630 infinitely variable m/min Tool holder: SK40 Total power requirement: 6.3 kW Machine weight approx.: 2.0 t Machine dimensions LxWxH: L:1.8xW:1.7xH:2.0 m The work table can also be adjusted manually. The projection of the counter-holder boom = 500mm, the total length = 1050mm. with end pos ...

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 76 mm -Hole circle: Ø 230 mm -Weight: 23 kg

Solid universal milling machine, milling machine from Jarbe with adjustable head in really nice condition Ready for immediate use technically flawless, tested quality The machine can be viewed at any time. On-site loading can be easily carried out with a forklift. Transport possible throughout Germany via freight forwarder.

Three-jaw chuck, three-jaw lathe chuck -Chuck size: Ø 250 mm -Passage: Ø 91 mm -Hole circle: Ø 170 mm -Shot: short taper 8 -Weight: 47 kg

Pneumatic cylinders, air cylinders, pneumatic rams, air rams -Stroke: 250 mm -Piston rod: Ø 38 mm -Dimensions: 168/168/575 mm -Weight: 18.4 kg

Tailstock, counter bearing for dividing head, dividing head -Peak height: 255 mm -Recording: MK4 -Dimensions: see drawing in the images -Dimensions: 600/220/H410 mm -Weight: 84 kg

Hydraulic pump, oil pump, hydraulic power unit, hydraulic pump, electric motor, DC motor, traction motor, drive motor -Manufacturer: ZF/hurth forklift drive HFK 250 -Wheel mounting: Dimensions see pictures -Bolt circle: Ø 270 mm M12 -Dimensions: 700/330/H285 mm -Weight: 69 kg

Horizontal Bracket Milling Machine Universal milling machine WMW Heckert FU 250 x 1000 • Table LxW: 1,250 x 335 mm • Spindle: 28 – 2800 rpm • Tool holder: SK 40 • Rapid traverse in: X-Y-Z • 3-axis digital display • Coolant device • Task lighting • Connected load 6 kW • Accessories: according to picture • Dimensions: L x W x H.: 1800 x 1600 x 1900 mm • Weight: 1,700 kg Good condition flawless operation Currently still with 400V collar plug -> will be converted to CEE plug on request Includes a wide range of accessories A function video can be sent via WhatsApp. The machine can be viewed in our showrooms at any time. You are very welcome - metalworking machines and accessories on more than 1000 square meters On-site loading with forklift no problem

Key bar chuck, power chuck, three-jaw chuck, three-jaw lathe chuck -Manufacturer: Forkardt, wedge bar chuck with clamping plate -Chuck size: Ø 250 mm -Bolt circle: Ø 235 mm -Mounting: Short taper 11 (196.8 mm) -Through hole: 60 mm -Total dimensions: Ø 400 x 265 mm -Weight: 67 kg

sheet width: 0250 mm coil outside dia.: 1800 mm weight max. in kg: 2 x 3000 kg : 3,80 mm : 470 - 530 mm : 21 : 30 mm : 4 : 18,0 kW speed: 20 m/min power capacity: 18 kW total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Decoiler AH 3000/2/250/ST with continuously variable drive, hydraulic central spread, Automatic post-spreading system, hydraulic pressure device, hydraulic swivel, Straightening machine RM 3025.4/21 with continuously variable drive, driven straightening rollers, manual Roller mill adjustment, quick-change device for the straightening rollers Belt loop control via ultrasound Material thickness / with material width 3.80 / 250 mm Material thickness / with material width 6.00 / 100 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Screw diameter; 55-35 mm Injectable volume: 558 - 139 cm3 Injection pressure: 2380-2500 bar Column width: 630 x 630 mm Mould thickness min: 300 mm max: 600 mm Aperture stroke: 600 mm Cores: 2 Robot Interface: Yes Options: Rotating base: Arburg 243849 year: 2012

Hydraulic cylinders, support cylinders, hydraulic rams, pressure rams -Hydraulic cylinder: with pressure plate, stroke 250 mm -Print plate: 200 x 140 mm -Cylinder: outside Ø 90 mm -Mount: bolt circle Ø 157 mm -Number: 4x cylinders available -Price per piece -Dimensions: 605/200 / H200 mm -Weight: 40 kg / pc.

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange: for three-jaw chucks, four-jaw chucks, face plates -Outer: Ø 250 mm -Admission: thread, dimensions see drawing in the photos -Dimension: Ø 250 x 85 mm -Weight: 9.3 kg

X-axis: 2500 mm Y-axis: 920 mm Z-axis: 820 mm Work table: 3100 x 900 mm Spindle Exception: SK/ISO40 Spindle speeds: 20 - 18,000 rpm. Tool changer: 30 pcs. Control: Heidenhain iTNC 530 Equipped with: -Conveyor - Cooling by spindle 40 bar - ISO40 tools -Operating instructions Country of origin: Germany Motor power: 35 KW Machine LxWxH: 6000 x 3800 x 2950 mm (transport dimensions) Machine weight: 25.000 kg

Hydraulic pump, oil pump, hydraulic unit, hydraulic pump, hydraulic pump, electric motor, DC motor, traction motor, drive motor, charging cable -Charging cable: for electric forklifts -Type: 3R-W Arcoflex 50 -Length: 2520 mm -Weight: 3.1 kg

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Hole circle: Ø 224 mm/M12 -Passage: Ø 76 mm -Dimensions: 300/300/H mm -Weight: 40 kg

Machine vise, sturdy vise, drill vise -Jaw width: 296 mm -Back height: 50 mm -Clamping range: 255 mm -Dimensions: 600/300/H155 mm -Weight: 89 kg

USED TETRA PAK TBA 21 250ML BASE FILLING LINE FOR SALE Item #: Usm-196 Category Tetra Pak TBA 21 -Filler TBA 21 250ml Base, Yom 2003 -Straw Applicator TSA 21, Yom 2010 -Film Wrapper 67, Yom 2004 -Packer TCBP 70, Yom 2007 -Helix 21, Yom 2003 -Conveyors and Paper trolly

capacity 90 degrees: round: 240 mm capacity 90 degrees: square: 240 mm : 165 x 310 mm saw band length: 2.725 x 27 x 0,9 mm mm table height: 940 mm band speed: 35 / 70 m/min total power requirement: 1,1 kW weight of the machine ca.: 0,4 t The Z252/DG has the following equipment: - Hydraulic semi-automatic, - Double miter 60° left/45° right - emulsion pump, - base, - saw blade, - 400V plug -16A- The machine is delivered fully assembled and ready for immediate use. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-jaw chuck, 4-jaw chuck -Chuck size: Ø 250 mm -Passage: Ø 83 mm -Hole circle: Ø 230 mm -Weight: 24 kg

Inductive sensor, electronic sensor -Pepperl Fuchs Part No.: 187480 -Dimensions: 245/225/H45 mm -Weight: 1 kg

From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-

Industrial Ethernet switch, network switch, LAN switch, rail switch -Manufacturer: Avantech, EKI Switch -Type: EKI-2525-AE -Outputs: 5 -Voltage: 12-48 VDC -Dimensions: 100/35/H150 mm -Weight: 0.6 kg

Pneumatic cylinder, air cylinder, pneumatic piston, air piston, standard cylinder -Manufacturer: Festo, standard cylinder type DSNU-20-25P-A -Stroke travel: 25 mm -Piston: Ø 20 mm -Piston rod: Ø 8 mm -Price: per piece -Quantity: 6 pieces -Dimensions: Ø 36 x 160 mm -Weight: 0.2 kg/piece

Chuck flange, flange mount, lathe chuck flange, drive flange -Muck flange: for three-jaw chucks, four-jaw chucks, faceplates -Outer diameter: Ø 250 mm -Inner diameter: 65 mm -Socket: Cone Ø 103 mm -Bolt circle: Ø 133 mm -Bolt circle: Ø 235/13 mm -Dimensions: Ø 250 x 100 mm -Weight: 13 kg

0: 250 mm 0: 3530 m³/h 0: 2500 pa Dimensions (L/W/H): 3.350x1.020x2.290 mm engine output: 5,5 kW turning speeds: 2800 U/min compressed air: Pmax 8,0 bar weight: 1100 kg Nestro dust extractor NE 250 W For sale on behalf of the customer ex location -------------------------- Manufacturer description: Dust extractor with pneumatic shaking and automatic water extinguishing system Including suction nozzle d=300 mm, 5 m cable with plug and reversing switch, electric motor 5.5 kW 400V/50 Hz, on/off switch, potential-free Contact for machine monitoring, motor protection switch, Pressure difference display, 3 mobile dust bins Clamp bracket, 3 chip collection bags (PE) 600x600 mm, i=1100mm Housing made of galvanized sheet steel Technical data: Nominal volume flow 3,530 m3/h associated negative pressure 2,500 Pa Suction side connection d=250 mm Continuous operation mode Type of current: three-phas ...

FRITSCH cone winding machine 250 T, used, technically tested, function tested, partially overhauled with new Teflonized adjustment roller/feed shaft

Transnorm conveyor belt GF 25050-700-600 RA2152 Technical data: Conveyor length (NL): 25050 mm frame width (NB): 700 mm, 800 mm with motor belt width (GuB): 600 mm Overall height (BH): 80 mm, 430 mm with motor Supporting feet: optionally available Conveying speed (v m/s): contact us Drive: SEW gear motor Electrical data: 50Hz V380-500 Drive drum: Ø = 81 mm Belt return roller: Ø = 81 mm Optionally available: Supports Side guide on one side and on both sides Frequency converter for stepless speed change Adjust length (longer/shorter) Prices net plus VAT ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg, Germany Features: Construction year: 2014 condition: good (used) Conveying length in mm: 25050 Nominal / outside width in mm: 700 Belt width in mm: 600 Driven: YES Engine type: SEW Eurodrive Zentralantrieb mit Spannstation Conveyor speed m / s: bitte Kontaktieren scope of de ...

Pneumatic cylinder, air cylinder, pneumatic piston, air piston -Manufacturer: Festo, Standard cylinder type DNU-50-250-PPV-A -Stroke travel: 250 mm -Piston: Ø 50 mm -Piston rod: Ø 20 mm/M16x1.5 -Price: per piece -Quantity: 2 pieces -Dimensions: 430/65/H65 mm -Weight: 2.4 kg/piece

Hydraulic filter changer: 250 mm Ø, brand: Eurotecno, engine: 4 KW (5.5 hp). With hydraulic unit with accumulator. GT-4753 Ready to get started? Contact us directly! Send us a WhatsApp message to (+34) 647 590 257 or an email to infogester.es for personalized advice.

Many of our machines are available from stock. Call and ask to find out more. CNC plasma cutting machine PCO-2010-D The machine was engineered and manufactured in Poland. Working parameters: - XY operating range (working area): 1020 x 2100mm - Clearance between table and gantry: 240 mm - Maximum cutting tube height: 200 mm - Idle speed (Cutting speed depends on the capacity of the plasma source and the thickness of working material.): 25000 mm/min. - Compatible with Hypertherm Powermax 45-125, and Hypertherm MAXPRO200 plasma sources. Structure specifications: - Length: 2650 mm - Width: 1780 mm - Height: 1500 mm - Total mass: 800.0 kg - Maximum load: 800.0 kg - Adjustable support legs: 4 pcs Easy application of metal sheets The entire gantry and the head are designed to travel out of the working area. This makes applying large sheets of metal easy. Systems THC ...

Chuck flange, flange mount, lathe chuck flange, driving flange -Chuck flange for: three-jaw chuck, four-jaw chuck, face plate -Outer diameter: 250 mm -Hole circle: Ø 225/Ø 13 mm -Dimension: Ø 250/H25 mm -Weight: 7.1 kg

HOVAP AP-Z-2550 Self-priming centrifugal pumps YOM: 2002 5.5 KW 2925 rpm 30m3/h Two pumps available Excellent working condition

sheet width: 2500 mm plate thickness: 3,0 mm distance between columns: 2620 mm true cutting angle adjustable: - back stop - adjustable: 850 mm cutting gap adjustment: - mm total power requirement: kW weight of the machine ca.: 2,8 t dimensions: 3,2 x 1,8 x 1,7 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Four-jaw chuck, four-jaw lathe chuck, 4 jaw chuck -Type: DH250x4/TGL30-2332 -Chuck size: Ø 250 mm -Throughout: Ø 80 mm -Rezess: Ø 210 mm -Hole circle: Ø 230 mm -Number: 3x available -Price: per piece -Weight: 18 kg

Roll jaws, floating central jaws, pull-down jaws, machine vice jaws, clamping jaws -Prisms: 90° -2x thread: M16 -Price: per piece -Number: 2 pieces -Dimensions: 250/40/H115 mm -Weight: 6.2 kg/piece

Specifications: - Max. working width 2520 mm - max. material thickness at 40 kp / mm², strength 3.5 mm - Bending angle adjustment can be preselected - Upper beam drive 400 V / 1.1 kW - Bending beam drive 400 V / 4.0 kW - Space requirement approx. W 3900 x H 1550 x D 1200 mm - Weight approx. 4500 kg

Key data: 2500 mm, 32 mm

Manufacturer / make: WMW Schwermaschinenbau Wildau Type/ type: UBR 32 x 2500-7/16 Lagernummer / stock number: 1019 Baujahr / new in: 1969 max. sheet width: 2500 mm Bale length / convexity length of rollers: 2700 mm Max. sheet thickness ( St 50): 32 mm Max. sheet thickness ( St 34): 39 mm min. sheet thickness ( St 50): 8 mm Number of straightening rollers:7 rollen / rollers Number driven straightening rollers: 5 rollers Straightening roller diameter of straightening rollers: 290 mm Output straightening rollers / diameter of input / output straightening rollers: 345 mm Number of support rollers: 13 Stützrollendurchmesser / diameter of support rollers: 288 mm Oberbolenhub/ stroke of upper beam: 120 mm Straightening speed / speed of straightening: 16 m / min Hauptantrieb / rated power of main drive: 90 kW Total load: 138 kW Gewicht de ...

BRAND: ZF MODEL: ZF 2555 RATIO: 2,333:1 POWER: 706 kW(960 hp) 1800 rpm Features: SAE-Housing: SAE-0, Flexible Coupling with Aluminum ring,Controls, Oil Cooler, Brackets, PTO Oil Cooler and Filters Aluminum Ring SN 50010644 HS Code: 84836080 NET WEIGHT 640 kg DIMENSIONS (cm) 90 x 120 x 90

Pester Pewo Pack 250 SN

Ventilation duct, ventilation flap, ventilation system, dust extraction, extraction system, ventilation ducts and fittings, canvas nozzle-flexible connection -Ventilation duct: elastic connection -Inside: Ø 250 mm -Flange: Ø 310 mm / bolt circle Ø 286 mm -Hose length: 155 mm -Number: 3x nozzles available -Price per piece -Weight: 1.5 kg / pc.