notching used for sale

Key data: 3 mm, 1050 mm

Notching Machine COMACA type N/EPAS Maxi Sheet thickness: 3 mm Table size: Length 1050 mm x Depth 700 mm Ends tables dimensions: 900 x 470 mm Throat depth: 110 mm Orientable stop Blade length: 225 x 225 mm Voltage: 380 V Total length with ends tables: 2900 mm Length: 1200 mm (with retreated ends tables) Depth: 800 mm Total height: 1100 mm Weight: approx 1 T

Saw blade diameter vertical and horizontal: 500 mm Max. profile height: 280 mm Max. latch width: 300 mm Max. notch height: 185 mm Max. notch depth: 185 mm Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

Offer 25496 Hydr.- Univ. - Two-station – sheet metal notching machine + hole punch Technical data: Station 1. Notching device - Cutting length up to 220 mm - Cutting thickness - steel with 400N/mm² strength 6 mm - Infinitely variable cutting angle adjustment by handwheel 30 - 140 ° - Pneumatic clamping - Locking stops left + right - Table support surface 1020 x 940 mm - With T-slots and depth stops - Table height approx. 920 mm Station 2. Kanteinrichtung oder Lochstanzeinrichtung - Max. pressure capacity 200 kN - Working speed 0 to 10 mm/sec - Bending device up to 800 mm - Hole punching up to 50 in 3 mm - Depth stops - Drive 400 V / 4 kW - E – Footswitch - Space requirement approx. W 1000 x H 1350 x D 1110 mm - Weight approx. 1100 kg

Technical data: - Cutting length up to 125 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 2.5 mm - Alu, plastic 6 mm - Cutting angle 90 ° - Depth stops - Footswitch - Space requirement approx. W 700 x H 1400 x D 800 mm - Weight approx. 150 kg

Saw blade diameter vertical: 600 mm Saw blade diameter horizontal: 500 mm Notching width: at 90° processing of profiles up to 300 mm, pointed mitres up to 30° Profile height max. 280 mm Notching depth: at 90° horizontally up to 185 mm / at 90° vertically up to 230 mm Material stop: swivel 30° - 90° - 45° Swivelling material stop with detent points and digital display Latch height motorized adjustable with digital display Motorized adjustment of angles with digital display Hydropneumatic material feed via 2-hand operation Pneumatic material tensioners Coolant lubrication

A Boschert notching machine with an integrated punching station is available. Cutting angle range: 30°-120°, punching capacity: 15t, punching diameter range: 9.19mm-91.87mm, cutting length range: 53.85mm-53.46mm, max. sheet thickness: 10mm, punching force: 15t, stroke rate: 40/min, table dimensions X/Y: 1000mm/650mm, machine dimensions X/Y/Z: approx. 1250mm/1000mm/1200mm, weight: approx. 2000kg. Documentation vorhanden. An on-site inspection is possible.

Sell a notching machine from FIM in good condition!

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm

Offer 26050 Univ. notching sawing machine Technical data: - Saw blade dimensions - vertical 400 x 3.5 x 40 mm - - horizontal 400 x 3.5 x 40 mm - Notching area / notch depth vertical 135 mm - Notching area / notch depth horizontal 105 mm - Notching width at 90° to 280 mm - Notching width at 30° to 100 mm - Vertical saw blade manual 90° - 30° swivel via handwheel - Use as a Schiftersäge without horiz. Saw blade possible - Profile stop shoulder can be swivelled 30° - 90° - 30° - Pneumatic material vise - Coolant spray device - Air connection 6 bar - Drive 400 V / 2 x 2.2 kW / 2800 rpm - Space requirement approx. W 2200 x H 1600 x D 1400 mm - Weight approx. 800 kg

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price

incl. integrated punching station Cutting angle range: 30°-120°, Sheet thickness up to 6 mm Punching capacity 15 tons Table approx. 1000 x 650 mm, incl Footswitches, div tools and stops Manual

Saw blade diameter vertical: 550 mm Saw blade diameter horizontal: 500 mm Max. profile height: 250 mm Max. feed: 830 mm Digital angle displays for material stop and tilting of both sawing units Pneumatic material tensioners Minimum quantity spraying device Hydropneumatic saw blade feed via 2-hand operation Weight: 1,000 kg

Hand notching sheet thickness 1.6 mm Compressive force 4 t Blade length 156 mm Angle adjustable from - to fixed degree Table area 450m x 305 mm Machine weight approx. 95 kg Dimensions LxWxH 530 x 380 x 480 mm Auction-ID: A7-46642-24

ALFAMACCHINE T350 miter sawmill Two-Saw for 45 Degree Cutting Blade diameter 350 mm Saw hole diameter 30mm Saw speed 3000 r.p.m 2×1.5 kw motors Air Requirement 5-7 bar Cutting Width: 15-80mm Cutting height: 10-80mm Net price

Notching machine - Footswitch - Emergency stop Sheet thickness 6 mm Pressure 18 t Blade length 220 mm Angle adjustable from - to 90 degrees Table surface 1100 x 950 mm Bending length 835 mm Machine weight approx. 1.1 t Dimensions L x W x H 1.2 x 0.8 x 1.4 m Auction-ID: A7-46642-22

Release Station 1: Max. sheet thickness: 6 mm steel, 4 mm stainless steel Fixed 90 degree angle with stops Knife length 225 mm Station 2 Incision: Max. cutting width: in one cut 25 mm at 100 mm cutting depth Max. sheet thickness: 4 mm steel Weight: 800 kg

Hydr. Notching machine - Footswitch - 2 pcs sheet metal stop Sheet thickness 3 mm Knife length 250 mm Angle adjustable from - to fixed 90 degrees Table surface 900 x 790 mm Machine weight approx. 0.65 t Dimensions L x W x H 1.2 x 0.9 x 1.1 m Condition: unchecked (6) Auction-ID: A7-46642-155

Offer 26125 Technical data: - Cutting length up to 150 mm - Cutting thickness - at 400N/mm² strength 4 mm - at 700N/mm² strength 3 mm - Cutting angle infinitely adjustable 30° - 120 ° - Pneumatic clamping of the cutting angle adjustment - Stroke 22 mm - Stroke rate 60 1/min - Table support surface with T-slots and depth stops - Table height 900 mm - Drive 400 V / 3 kW - E - Footswitch - Space requirement approx. W 1000 x H 1150 x D 1400 mm - Weight approx. 850 kg

Offer 24371 Technical data: - Machine for making closed cold formed corners - Material thicknesses 0.8 to 2.5 mm - max. achievable board height see table - Min. workpiece length / min. workpiece width 120 mm - Production time per shaped corner, regardless of the material 10 sec. - Drive 400 V / 4 kW - Control panel with E – foot switch - Space requirement station 1 approx. W 1100 x H 1650 x D 1100 mm - Weight station 1 approx. 800 kg - Space requirement station 2 approx. W 800 x H 1400 x D 900 mm - Weight station 2 approx. 500 kg

Lg.Nr. 26092 Technical data: - 90° cutting head pneumatically operated - Cutting thickness - normal steel up to 2 mm - Stainless steel up to 1.5 mm - Aluminium up to 3 - Blade length 130 mm - Table size W 600 x D 380 mm - Working height 940 mm - Footswitch - Compressed air requirement 6 - 8 bar - Space requirement approx. W 600 x H 1250 x D 850 mm - Weight approx. 180 kg

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price

Included: accessories spare blade, as well as adjustable stop on the right and left Auction-ID: A1-46862-21

Cross-Cut Saw OMEC TA185 Maximum cutting height 180mm Maximum cutting width 900mm Saw diameter 550mm Pneumatic material pressure Pneumatic saw pass Saw control with two buttons 7.5kw main motor Machine dimensions 492x145x120cmH Weight 600kg Net price