nn used for sale

Description: Electric Forklift. Rated capacity:1000kg. Load center:500mm. Lift height:3000mm. Fork size:35×120×920mm. Overall width:1090mm. Mast lowered height:1995mm. Mast extended height:4042mm. Overhead guard height:2199mm. Min. turning radius:1894mm. Travel speed :11/13km/h. Service weight:3060kg. Wheelbase:1250mm. Battery: 60V/120Ah The item that is delivered is NOT the one shown in the pictures, but an equal one Approx. Onsite Dimension. (l x w x h): 2,050 x 1,100 x 2,100 mm, weight approx.: 2,000 kg

Description: MNR: R911309706, SN: 7260410805523, 4700 rpm, 600 V, DC 24 V, 1.77 Nm/A Approx. Onsite Dimension. (l x w x h): 300 x 100 x 130 mm, weight approx.: 6 kg

Description: MNR: R911309706, SN: 7260410805529, 4700 rpm, 600 V, DC 24 V, 1.77 Nm/A Approx. Onsite Dimension. (l x w x h): 300 x 100 x 130 mm, weight approx.: 6 kg

Description: MNR: R911309706, SN: 7260410805524, 4700 rpm, 600 V, DC 24 V, 1.77 Nm/A Approx. Onsite Dimension. (l x w x h): 300 x 100 x 130 mm, weight approx.: 6 kg

Description: MNR: R911309706, FD: 18W06, flange bearing WBK20 DF, n max 4700 rpm, more details: see photos Approx. Onsite Dimension. (l x w x h): 1,450 x 180 x 200 mm, weight approx.: 27 kg

Hünnebeck BOSTA 70 facade scaffolding Hünnebeck BOSTA 100 Masons scaffolding / scaffolding of clinker Available in various designs, sizes and quantities. The photos are sample photos, the inventory changes daily. We are happy to answer questions phone 06190-93449-0 The material can be visited by appointment, we buy also. -> Note also our other ads <-we can give you several thousand square metres used scaffolding (E.g. by Layher, Plettac, Rux and Hünnebeck and compatible) offer - ask us!

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 MADE IN SWITZEWRLAND BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 MADE IN SWITZERLAND IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba With child of regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

FOR SALE... OVERHAULED TURBOCHARGERS ABB VTR 254-11 & BBC VTR 214-11 TO WHOM IT MAY CONCERN; WE VE BELOW LISTED OVERHAULED & REPORTED TURBO CHARGERS AT OUR STOCK. READY TO TRANSPORT AND USE... ABB VTR 254-11 HZTL 428765P2 nNmax 523 nBmax 497 tMmax 680 C tBmax-650 C SFUSO1 YEAR OF BUILT 2010 BBC VTR 214-11 NoHT 399285 their 635 Tmax 680 V 01113 R 012 H 04109 W 12206 E 03221 U 023 YEAR OF BUILT 2012 IF YOU'VE ANY FURTHER QUESTIONS PLS DO NEED HESITATE TO CIONTACT WITH US. Capt. Ayhan Ugurluba BEST regards; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY

Starter package: 10 sqm Hünnebeck Tekko basement and Foundation shuttering, needed. The offer consists of: 12 x Tekko table 90 x 90 24 x Tekkozwinge 12 x tie rod DW15 100 cm 24 x nut We are happy to answer questions phone 06190-93449-0 Please note also our other offers! We can offer you several thousand square metres of used moulds, tools and containers - ask us!

Hünnebeck Manto 330 â?¢ Strong connection can be implemented by directional angle: 40 m ² of shell surface in a crane excavation without additional stiffening â?¢ highest bending strength due to the 14 cm high steel frame; Permitted concrete print 80 kN/m ² â?¢ rational shelling of large areas without compensation and with few anchoring points using MANTO XXL panels â?¢ Light and fast â or shelling of shafts with the MANTO chess corner â?¢ consistently good concrete image due to fire galvanizing of the frame and high-quality shakheads â?¢ Also suitable for shells finely skinned walls. 132m ²-EUR 19,969,60 Stocked: Table/Panel 90 x 330 â 20 Stk/pcs. Table/Panel 75 x 330 â 20 Stk/pcs. Inner corner/ash Inner Corner 35/330 â 6 Stk/pcs. Exterior ecke/Ou ...

CNC lathe make MONFORTS type DNC 5Year 1995 with C-axis and driven tool stationsCircumference diameter: 560 mmNumber of revolvers: 2Travel distance Z1 / Z 600/600 mmTravel X1 / X 260/260 mmMax. Spindle distance: 1460 mmSpindle passage: 85 mmSpindle flange: A8 / A8feed drivesRapid traverse Z1 / Z 15/15 m / minRapid traverse X1 / X 12/12 m / minFeed force Z1 / Z 11900/11900 NFeed force X1 / X 6600/6600 NNumber of revolvers: 2Number of tools per turret: 12Straight shank: 40 mmTurning tool shank: 25 x 25 mmSpeed range: 5 - 4000 rpm.Drive power: 18/24 kWWith:- CNC control SIEMENS 840 C- C axis- 2 tool turrets with driven tool stations- without driven tools- 2 opposite spindles- 1 set of tool holders- Chip conveyorSingle-layered run!usedPrice on request.Delivery: ex warehouse or location free loading truck.Payment: net at takeover or by appointment.Technical data are not binding. Errors except ...

Assortment of different formwork devices and formwork aids â?¢ various formwork accessories: system RASTO, MANTO, RASTER, PERI e.g. anchor nuts, anchor plates, Anchor rods (various lengths) â?¢ Formforce, formwork consoles, Formwork elements, belts, etc. â?¢ Bearings and transport containers, such as Boxes made of steel sheet, lattice boxes â?¢ scaffolding accessories, â?¢ see, among others, a list of materials and photos, manufacturer HÃ?NNEBECK, MÃ?BA, ISCHEBECK, PERI, PASCHAL and others. Pricing: from stock Hattersheim, purchase of partial quantities also possible. everything subject to intermediate sale price on request

Dough kneading machine Universal Charge Nneter WP UC 80 a Wendelkneter with 2 extendable tank wagons manual control 2 watches, 2 speeds Stainless steel kneading tool DGUV V3 tested Connection 400 V, 13.kW, 63A-CEE plug Used machine overhauled with 6 months warranty

Bosch Rexroth Linear Cylinder Machine The machine is a special production for Bosch for its own use in the production process. The machine contains: Rexroth MSK050C-0600-NN-M1-UG1-NNNN 3-Phase Synchronous PM Motor Festo DGC-40-650-KF-Y5R-A 532449 H608 Rexroth EMC-063-NN-2 Schischke MY_1106 E2 - Voltage 380-480, 6 bar, 1300 kg, year of construction 2016 Condition: used The plant is located in Hildesheim and can be dismantled and picked up there by the customer. Dismantling and transport according to offer and agreement also possible by us. Complete plant closure, large selection of mezzanine, pallet racks, shelves, paternosters. High-quality industrial machines, lathes, grinding machines, manual machines

Vacuum lifting device, vacuum lifter Custom-made as handling device for an industrial robot Year of construction 2008 Payload approx. 60 kg Suction foot spacing min. 120 x 150 mm Suction foot distance max. 700 x 600 mm- 4 pieces Suction feet 100 mm- 4 pieces Vacuum ejectors, vacuum generator PIAB with compressed air connection 8 mm - 2 pieces Cross member, adjustable in width via servo drive from 150-600 mm- Suction foot distance adjustable via 2 servo drives from 120-700 mm - Suction cup adjustment via 3 servomotors REXROTH MSK040C-0600-NN-M1-UP0-NNNN- Very complex and precise design with linear guides and trapetz threaded spindles- Flange plate for suspension or flanging on the robot Length: 105 cm, width: 66 cm, height: 54 cm Net weight approx. 120 kg good condition ; used

Servo motor with brake, permanent magnet motor REXROTH MSK050C-0600-NN-M1-UG1-NNNN R911298355 6000 RPM 600 V AC IP65 Shaft: Ø 19 mm Flange: 98 x 98 mm used, tested ! Dimensions: 275 x 140 x 100 mm

Servo motor with brake, permanent magnet motor REXROTH MSK040C-0600-NN-M1-UG1-NNNN R911306061 7500 RPM 600 V AC IP65 Shaft: Ø 14 mm Flange: 82 x 82 mm used, tested ! Dimensions: 250 x 130 x 85 mm

Servo motor with brake, permanent magnet motor REXROTH MSK030C-0900-NN-M1-UG1-NNNN R911308684 9000 RPM 600 V AC IP65 Shaft: Ø 9 mm Flange: 54 x 54 mm used, tested ! Dimensions: 235 x 100 x 55 mm

Servo motor with brake, permanent magnet motor REXROTH MSK101E-0300-NN-M1-AG3-NNNN R911311633 4600 U/min 600 V AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 600 x 260 x 195 mm

Servo motor with brake, permanent magnet motor REXROTH MSK101E-0300-NN-M1-BG3-NNNN R911323278 4600 U/min 600 V AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 600 x 260 x 195 mm

Lippert belt conveyor GF 22000-650-500 RA1361 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW brand motor with MOVIMOT inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown were taken in a logistics center while still installed. Technical data: Length (NL): 22.000 mm Frame width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm Support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT 80 N4 MM07 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Drive drum (AT): Ø = 81 mm Belt return roller: Ø = 50 mm Belt type: NNT 10 ENBU year of construction: 2001 Optional accessor ...

Servo motor with brake, permanent magnet motor REXROTH MSK101D-0300-NN-M1-AG3-NNNN R911315798 4600 U/min 600 V AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 510 x 260 x 195 mm

Lippert belt conveyor GF 15500-610-450 RA1490 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 15.500 mm Framework width (NB): 610 mm belt width (GuB): 450 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 34 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Servo motor, permanent magnet motor REXROTH MSK061C-0600-NN-M1-UG1-NNNN R911315844 6000 Unnn /min 600 V AC IP65 Shaft: Ø 19 mm Flange: 115 x 115 mm New ! Dimensions: 320 x 115 x 160 mm

Lippert belt conveyor GF 20000-610-450 RA1484 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 20.000 mm Framework width (NB): 610 mm belt width (GuB): 450 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Servo motor with brake, permanent magnet motor REXROTH MSK030C-0900-NN-M1-UG1-NNNN R911308684 9000 RPM 600 V 3AC IP65 Shaft: Ø 9 mm Flange: 54 x 54 mm used, tested ! Dimensions: 235 x 55 x 100 mm

Lippert belt conveyor GF 14240-610-450 RA1475 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 14,240 mm Framework width (NB): 610 mm belt width (GuB): 450 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DRE80M4/MM07 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of constructio ...

Servo motor with brake, permanent magnet motor REXROTH MSK101D-0300-NN-M1-AG3-NNNN R911315798 4600 U/min 600 V 3AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 510 x 195 x 265 mm

Lippert belt conveyor GF 17270-610-450 RA1474 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 17,270 mm Framework width (NB): 610 mm belt width (GuB): 450 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Servo motor with brake, permanent magnet motor REXROTH MSK040C-0600-NN-M1-UG1-NNNN R911306061 7500 U /min 600 V 3AC IP65 Shaft: Ø 14 mm Flange: 82 x 82 mm used, tested ! Dimensions: 250 x 85 x 125 mm

Lippert belt conveyor GF10250-650-500 RA1394 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 10.250 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): with frequency converter up and down Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT 10 ENBU Year of manufacture. 2001 Op ...

Servo motor with brake, permanent magnet motor REXROTH MSK101E-0300-NN-M1-AG3-NNNN R911311633 4600 U/min 600 V 3AC IP65 Shaft: Ø 38 mm Flange: 192 x 192 mm used, tested ! Dimensions: 600 x 195 x 265 mm

Lippert belt conveyor GF 22250-650-500 RA1426 The Lippert conveyor belt is from 2001 and in good (used) condition. The belt conveyor has a SEW motor with MOVIMOT frequency inverter to control the speed. Lateral guides and/or light barriers can be installed on request at extra cost. Supports are not included in the delivery. These are optionally available on request. The pictures of the conveyor system shown here were taken in a logistics center while still installed. Technical data: Conveying length (NL): 22.250 mm Framework width (NB): 650 mm belt width (GuB): 500 mm height (BH): 105 mm support feet: optionally available Conveying speed (v m/s): adjustable up and down with frequency converter Drive: SEW gear motor S37 DT80N4/MM07/BW1 Electrical data: 50Hz V380-500, kW 0.15 / 0.75 / S1 Deflection roller (UR): Ø = 64 mm Drive drum (AT): Ø = 81 mm Belt: Type NNT-10 ENBU Year of construc ...

Maintenance unit, pressure regulator, pre-assembled maintenance unit with filter regulator and lubricators NORGREN OLYMPIAN PLUS BL64-216 Filter regulator: B64G-NNK-AD3-RMN lubricators: L64C-NNP-EDN P: 0,,4 - 10 bar Pmax.: 17 bar Connections: 3/8 ( inch ) installation length: 185 mm used, checked! Dimensions: 280 x 2250 x 115 mm

Servo drive, control, converter, frequency converter, frequency converter, drive converter, compact converter, drive controller -Bosch Rexroth: Compact controller IndraDrive C -Type: HCS02.1E-W0028-A-03-NNNN -Control card: CSH01.1C-SE-EN2-NNN-NNN-S1-S-NN-FW -Dimensions: 455/310/H115 mm -Weight: 4.8 kg

Maintenance Unit, Pressure Regulator NORGREN OLYMPIAN PLUS C64S-DK1064 B64G-NNK-MD3-RMN T64T-4GB-P1N P: 0.4 - 10 bar Pmax.: 17 bar Ex-Protected ! Dimensions: 300 x 250 x 120 mm

Maintenance unit, pressure regulator NORGREN OLYMPIAN PLUS C64S-DK1064 B64G-NNK-MD3-RMN T64T-4GB-P1N P: 0.4 - 10 bar Pmax.: 17 bar with pressure switch, explosion-proof ! Dimensions: 300 x 250 x 120 mm

Maintenance Unit, Pressure Regulator NORGREN OLYMPIAN PLUS C64S-DK1064 B64G-NNK-MD3-RMN T64T-4GB-P1N P: 0.4 - 10 bar Pmax.: 17 bar Connections: 1/2 used, explosion-proof ! Dimensions: 290 x 170 x 120 mm

Sammelhefter / Saddle Stitcher Mueller Martini Bravo Plus Amrys Year 2007 - SN. MMZO 1 306 445 – Working hours 7.100Std./h PLC Steuerung mit Display - Geschwindigkeit max. 14.000 cyc./h. Size (untrimmed) max. 320 x 480mm - (trimmed) min. 105 x 148mm - Product thickness max. 5mm 6 Feeder Type 0370.0458 - Year 2007 - Serial-No. MMZO 1 306 445 Umschlaganleger / Cover Feeder Type 1529.0416 - Year 2007 - Serial-No. NN35997/ZO1306447 Doppelbogen/Dickenkontrolle / Semko Thickness Control Type 0333.0435 Heftstation / Stitching unit Bravo Plus Typ 0380.0450 - Year 2007 - Serial-No. MMZO 1 306 445 Dreischneider / Three Knife Trimmer 0449.0435 - Year 2007 - Serial-No. MMZ0 1 306 445  – include 4th & 5th knife attachment Kreuzleger / Compensating Counter Stacker Perfetto 0450.0400 - Year 2007 - Serial-No. MMZ0 1 306 445-60 Bandauslage / Band Delivery Mueller Martini 1564.0400 - Year 200 ...

faceplate diameter: 3.000 mm swing diameter: 3.200 mm turning height: 2.200 mm Control: 840 D ShopTurn Siemens cross rail adjustment: 1.500 mm tool travel: 1.250 mm faceplate turning speed range: 0 - 120 U/min power capacity: 75 kW Driven Tool Stations:: speeds: 10 - 3.000 U/min output: 22 kW max. Torque: 320 Nm tool adaptor: HSK 160 (VDI 60) tool magazin:: number of toolpositions: 16 pos. weight of tools max.: 25 kg total power requirement: - kW weight of the machine ca.: 36 t dimensions of the machine ca.: 6,0 x 6,0 x 3,5 m Chip conveyor: Coolantsystem: C-axis: 0,001° hydraulic system: Tool Magazine: 16 pos. tool holders: div. Vertical Turning Machine KONRAD SEIDLER - Vertimaxx 3000 - including clamping material, various tool holders - 1x angle bore and milling head 90° Drive spindle according to SEIDLER HSK 160B Output spindle ABS 63 Gear ratio i 1:1 Max. speed 2300 rpm (co ...

Roll enlargement and slitting unit The equipment consists of: Walking conveyor Roll turner Unwinder trolley Unwinder Two-position scraper bender Correct-feed rollers Centering rollers No. 1 (RC 8 x 1600) Sheet straightening machine (5x230x1700) Roller conveyor with pressure roller Guillotine shears No. 1 (NNR 10-1700/2) Cleaning device Centering rollers No. 2 Complex for butt welding of strips L-1700-M-Sh Pulling rollers No. 1 Loop table No. 1 Centering rollers No. 3 Pulling rollers No. 2 Centering rollers No. 4 Disc shears Edge-crushing shears NKP 4-500 Roller conveyor idle Loop table No. 2 Separating device No. 1 Pulling rollers No. 3 Guillotine shears No. 2 Device for lane separation No. 2 Winding device Winder assembly Winder pinch roller Folding winder support Winder unloading device Unloading cart Column with rotary console

Two genset Cummins QSK60G6,, LOW TIME WORK 400 hours 2500kva 1700 rpm 60hz, panel control , exhaust system for power house, include transfer panel