nm heilig bv used for sale

Overview  The steam generator was built in 2015 by the American manufacturer Clayton. The machine was recently dismantled by a specialist company. Technical specifications  Net output: 589 kW Equivalent steam production max.: 790 kg/h  Water content in operation: 130 liters  Regulated gas pressure minimum: 25 mbarG Maximum gas pressure: 200 mbarG Consumption at full load: 62.9 Nm³/ h  Burner regulation (2-stage): 0-50-100 %  Steam quality: > 99.5  Combustion efficiency (100% stage): 92%  Combustion efficiency (50% stage): 94  Generator dimensions (LxWxH): 2,030 x 1,300 x 1,835/ 2,200 mm  Dry weight: 1,215/ 1,285 kg  Pump dimensions (LxWxH): 1,350 x 680 x 1,025 mm Weight of water pump: 325 kg  Installed electrical power: 4kW Accessories  Back pressure regulator DN40  Vertical atmospheric deaerator + chemical dosing pump  Water softener  Chemical tank 60L + alarm + drip t ...

Procomac UNICLEAN 2R 2 OP1 BA A 20 1999 The Uniclean units is a modular system comprising five units Thinned NaoH stocking unit Thinned HNO3 stocking unit Electrical panel Pneumatic panel Heat exchanger unit The purpose of this system is to sterilise the machine at the end of each work shift and whenever necessary for hygienic purposes for example before activating the production line after a lengthy line stoppage week end NaOH Dilutions 1 3 HNO3 Diluitions 1 3 Consumptions Water 20 M3 H Steam 750 Kg H Air 3 Nm3 H [...for more information send your inquiry to the seller.] refno: AT38

Standard Inductive Sensor, Inductive Sensor BALLUFF BES01U1 BES Q08ZC-PSC20B-BV06 10 - 30 V DC Range: 2 mm Connection: Cable, 3-pin Material: PBT ( Active Area ), Zinc, Die Casting ( Housing Material ), PVC ( Sheath Material ) Connection Cable: Length approx. 6,0 m New ! Dimensions (sensor, without cable): 40 x 8 x 8 mm Dimensions (packaging): 250 x 160 x 20 mm

BYSTRONIC BySprint 3015 laser cutting machine was built in 2006 in Switzerland. Designed for even the most intensive machining, the machine uses an extremely stable 3 kW laser beam, whose excellent parameters ensure the highest energy efficiency while maintaining low operating costs. Additionally, in order to meet any production challenges, the process of loading and unloading the workpieces can be performed during the cutting process, which significantly increases production efficiency and reduces machine downtime to a minimum. The offered BySprint 3015 laser cutting machine has been regularly serviced and its total weight is approximately 12000 kg. Technical specifications of the BYSTRONIC BySprint 3015 laser - laser beam power: 3 kW - laser beam power adjustment range: 150 – 3000 W - work area (L x W): 3048 x 1524 mm - maximum sheet metal dimensions (L x W): 3000 x 1500 mm - ...

Pilot - autoclave for product development., Suitable for all known heat sterilization and pasteurization processes:, Full water, sprinkling, pure steam and steam - compressed air - sterilization, possibility of rotation, Dimensions of the space available for products in the cage: W x D x H: 260 x 320 x 182 mm, Electrical connection value: approx. 1.5 kW, with booster pump: approx. 3.5 kW, steam connection:, Connection value: approx. 250 kg/h,, Steam pressure: 6 bar overpressure, compressed air connection:, Connection value: 0.6 Nm³/h, 6 bar overpressure, Drainage: hot water resistant up to 160°C, Connection value: 50 ltr/min, Weight: approx. 900 kg, matching:, Electrically heated steam generator, make Certuss, year of construction 2005, Installation, approval and TÜV monitoring-free, Technical specifications:, Steam output: max. 97 kg/h, power reduced to 63 kg/h, Heat output: max. 72  ...

MCA BVS More then 300 machines new and second hand on our seema .de

diameter: KORB 750 mm height: KORB 450 mm workpiece weight: max. 500 kg tank capacity: 130 l injection pressure: 3.4 bar Control: SIEMENS Number of working hours: 785 h compressed air: min 5.0 bar total power requirement: 8.7 kW with only approx. 785 operating hours () Description/equipment: - universal spray cleaning system Area of application e.g. vehicle technology or hardening shop - with a lid that can be easily opened upwards - All process steps take place in one chamber - The rotation of the goods carrier around the U-shaped nozzle system creates a . All-round, thorough cleaning guaranteed - including SIEMENS SIMATEC Touch control unit Machine link: http://mhp.logotech.de/hpm/v7/Datenblatt/datenblatt.php?machineno=1008 -9801176 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

General SKU200W001 LocationBarneveld MakeHPV TypeDish LPD liquid processing unit No.1200-0708/2008 Year of construction2008 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Inline mixer Capacity18,0 t/h of final product MaterialStainless steel 1.4435 (316L) Information Total height2,6 m Weight3500 kg CEcheck Floorspace6,4x2,35 m Extra Specificationsperfume, aroma, mixing skid The LLPD mixing machine is designed for continuous mixing of the final product and its accumulation for subsequent pumping into final packaging. The machine is capable of producing various modifications of the final product (FP) in 10 perfume variants and different color spectra available within the capacity ranges of dye dosing systems. Qualified reblend (RB) can be added to FP during normal production within the dosing capacity range. The LLPD mixing machine consists of: � ...

Manufacturer: domino - Model: G series - Type: inkjet printing Manufacturer: Cermac - Type: conveyor Camera: Keyence - Type: detection camera Ejection: compressed air Motor power : 0,12 kW Conveyor width: 200 mm Video in operation: https://www.youtube.com/watch?v=cZdCP2Gy0hI This equipment can be part of a set : Pester Pewo-pack 200 SN-K - Shrinkwrapper -> https://www.osertech.eu/en/product/pester-pewo-pack-200-sn-k-shrinkwra pper/ Natel NM25 - Accumulation table -> https://www.osertech.eu/en/product/natel-nm25-accumulation-table/

Manufacturer : Pester Model: Pewo-pack 200 SN-K Type: Electronically/pneumatically controlled bundling / shrink-wrapping machine Application: Production of single or grouped packs. Year : 1995 Power: 1.6 kW Stacking device Film type: PE Max. film width 200 mm Min. film width 30 mm Max. film thickness 0.1 mm Min. film thickness 0.02 mm Max. reel ? 300 mm Core diameter: 70/76 mm Operating video: https://www.youtube.com/watch?v=cZdCP2Gy0hI This equipment can be part of a : Domino / Keyence / Cermac - Inkjet printing with detection -> https://www.osertech.eu/en/product/domino-keyence-cermac-inkjet-printi ng-with-detection/ Natel NM25 - Accumulation table -> https://www.osertech.eu/en/product/natel-nm25-accumulation-table/

Manufacturer : Nova (SERAC) Model: NS 574/4 Year : 2004 Type : volumetric filling by 2 pistons Number of heads: 4 Volume : 500 to 7400 ml Volume per mm of stroke: 18.14 ml Product: liquid / semi-liquid for flasks, bottles, cans External conveyor control Neck detection Available filling formats Filling heads available Recovery tank Drain hoses installed on photos. Power: 0.45 KW Air consumption: 140 Nm3/H at 6 bars

Overview The solo screw capper was manufactured from Adelski in 2000. As it is not needed any longer in the filling line it is for sale. The machine has one screw capping head . The cap sorting system belongs to the scope of supply. The machine was dismantled recently and is in technically good condition. A change over to a BVS 30 x 60 can be offered on request, same as PP caps. Tech Specs: Capacity: up to 2,500 bph Number of capping places: 1 Working direction: counter clockwise Control: Siemens S7 Processable caps: MCA 28 x 15 and 28 x 44 Accessories: Screw cap sorting system

Description: Output: max. 3,150 m³/h Negative air pressure: max. 2,250 PA Voltage: 3 x 400 V Motor power: 3 kW Waste container volume: 72 l Compressed air consumption: 73 Nm³/h Suction nozzle: 1 x 160 mm / 1 x 200 mm Approx. Onsite Dimension. (l x w x h): 1,100 x 1,100 x 2,700 mm, weight approx.: 260 kg

Laufrichtung: links-rechts Leistung: ca. 5.000 Fl./Std. mit Veschlussmagazin Caps : MCA 28 , BVS 30x60 , 31,5 More then 300 machines new and second hand on our seema .de

Description: STRAMA camshaft cleaning system The cleaning system is suitable for cleaning camshafts or parts with smaller physical dimensions. , Camshaft cleaning was last carried out on the system. The machine is currently out of service. A brief description of how the machine works: A handling robot with a 3-finger centric gripper takes the camshafts automatically. The robot feeds the camshaft to the cleaning, drying and vacuum drying stations one after the other. The cleaned and dried shaft is then automatically deposited by the robot in a removal station. , The cleaning system consists of the following components: Transfer with robot from workpiece carriers Cleaning stations: Cleaning, blowing off / drying and vacuum drying Removal station (depositing by robot) Handling robot with gripper (robot type: KUKA, KR30-3 Foundry) Soundproof enclosure Tank, filter and pum ...

x-travel:730 mm y-travel:850 mm z-travel:1100 mm control:MSX 711 MAPPS IV Spindle power:22 / 18,5 kW Spindle RPM:12000 1/min Tool magazine:120 HSK-A 63 max. tool diameter:70 mm Max. Tool dia with free space next in magazine:140 mm max. tool length:480 mm max. tool weight:12 kg rapid travel x/y/z:50.000 mm/min A-axis (5th axis) pivoting table:+30° -120° ° Rapid Rpm B-axis (rotary table):50 1/min Rapid feed A-axis (tilt axis):20 1/min Pallet changer 2x:500 x 500 mm max. workpiece weight:500 kg workpiece - installed height:700 mm max. workpiece diameter on pallets:700 mm total power requirement:63 kVA weight of the machine ca.:21 t dimensions of the machine ca.:6,0 x 6,1 x 3,3 m Number of coordinate systems:300 Memory:1 MB Registered Programs:1000 Coolant through spindle 50 bar with filter:Frascara Fast state of the art 5-axis machining center with twin 500mm pallet changer, full A- an ...

x-travel:730 mm y-travel:510 mm z-travel:510 mm control:Mori Seiki MSX 711 MAPPS 3 turning speeds:12000 1/min spindle drive:22/18,5 kW c-axis:360.000 x 0,001° b-axis:+170.000/ -170.000x0,001° rapid travel x/y/z:50 / 50 / 40 m/min Feed x/y/z:50 / 50 / 40 m/min table diameter:500 mm workpiece height max.:450 mm max. workpiece diameter:700 mm workpiece weight:300 kg tool magazin::91 HSK-A 63 C-axis RPM:120 1/min tool diameter:80 mm Tool diameter with no neighbouring tools:125 mm tool length - max.:300 mm Table sensor for tool setting and auto-measuring:Renishaw No. of free M-functions:10 Tool pairs for Tool life management:1024 dimensions of the machine ca.:2,8 x 4,5 x 3,1 m weight of the machine ca.:12 t total power requirement:54 kW offsets for parts:54 No. of tool offset pairs:400 Full 5 axis universal high speed machining center with turning and swivelling table and vertical spindle.

turning diameter over bed:42 mm turning diameter over longitudinal slide:42 mm turning length:110 mm control:FANUC 31 i model B spindle speed::25 - 6000 1/min spindle:5,5 / 7,5 kW spindle hollow:42 mm total power requirement:25 kVA weight:3,3 t space requirements approx. LxWxH:2,95 x 1,55 x 2,15 m CNC-lathe, NEW , from showroom we have 4 new machines in our stock CNC long center lathe with moved spindle and subspindle prepaired for bar loader up to 42 nmm 7 axis ( X Z Y C Z2 X2 C2 ) 5 pcs. toolholder 20 x 20 mm 5 pcs. drill holder 4 pcs. driven tools , max. 6.000 rpm 4 pcs. driven tools from backside , max 5.000 rpm swarf conveyer, high pressure cooling system hollow clamping device, eletr. handwheel hydraulic hollow clamping cylinder front- and backside clamping system on both sides Hainbuch SK 52 0 h "machine on", 0 h "spindle on" !

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm height beneath floor:0,3 m power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m clutch-/ brake combination:pneumatic; Desch overload protection in ram:mechanical ram counterbalance:pneumatic ram adjustment:motoric drawing cushion in table:pneum ...

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor:0,3 m pneumatic clutch-brake combination:Desch Mechanical pincers feed:Obru, BVK 3.10.3

pressure:500 t stroke:40 - 160 mm no. of strokes:32 / 48 /min distance between columns:1620 mm distance table/ram, max. stroke up, adjustment up:660 mm table surface area:1600 x 1300 mm table height over floor:750 mm column travel -side:400 x 430 mm ram surface:1400 x 1200 mm ram adjustment:120 mm pressure of drawing cushion in table:60 t stroke of drawing cushion in table:100 mm drawing cushion surface in table:1300 x 810 mm material width of feeder:1000 mm material thickness of feeder:- 6,0 mm feed length:350 mm power requirement:44,0 / 66,0 kW weight:56,0 t Dimensions (WxDxH):3,55 x 2,55 x 5,1/5,8 m height beneath floor without drawing cushion:0,3 m height beneath floor with drawing cushion:1,0 m pneumatic clutch-brake combination:Desch drawing cushion in table:pneumatic Mechanical pincers feed:Obru, BVK 3.10.3

Year of production / SO / GO: 1987 / - / 1997 Technical parameters of the machine: Maximum torque on the spindle - 1000 NMMaximum feed force in the X, Y, Z axes - 25,000 NMMaximum workpiece weight - 2,000 kgTotal table area (with grooves) - 630 x 2200 mmNumber of table T-slots - 5Width and T-pitch Table grooves - 22 x 100 mmTable height from base - 900 mmLongitudinal table stroke X - 1,500 mmTransverse table stroke Y - 630 mmVertical headstock stroke Z - 630 mmSpindle taper - ISO 50Spindle diameter in front bearing 110 mmSpindle face distance from table clamping surface - 150 -780 mmSpindle motor - regulatingMotor power S119.3 kW, S327.4 kWSpindle speed range - 20-3 500 n.min-1Reed range 1-5 000 mm.min-1Speed ​​feed in X, Y axes - 15 m.min-1Speed ​​feed in Z axes - 10 m.min-1Total length - 5 900 mmTotal width - 3 400 + 3 600 mmTotal height - 3 400 mm.

A complete sizing line is available, max. workpiece dimensions: 2500x500x30mm, includes alignment station SAG RULLIERA INTR. SEZION, longitudinal milling Gabbiani TKM.72 S, number of units: 4, power: 5.5/5.5/7.5/4kW, belt conveyor SAG, cross processing Gabbiani TKM. 72 S, power: 4/4/5.5/5.5kW, turner SAG, cross conveyor SAG TRANSFER CINGHIE RIBALTATORE, collecting station (hopper) SAG RULLIERA CON TRAMOGGIA, film machine BVM SM 6015 L, shrink tunnel BVM SC 6030 D, palletizer Sacot SCA 01 SPEC, the machine was used for profiling floorboards.

Max. output: 8000 bottles/h, bottle dimensions: 50-95x140-340mm, filling height: 20-70mm, length: 2960mm, width: 2830mm, height: 3250mm, weight filler, substructure, cladding and accessories: 7.8t, the filler is designed for filling still fruit juice at 85°C, the following closures can be processed via the quick-change adapter (set-up time per head 1min), aluminum screw cap 28 TS RO PP (MCA28), VC 30x60 (BVS 30/60) and pick & place plastic screw cap with 38mm magnetic torque head, with adjustable bottle guide stars in the infeed and discharge, quick-change profiles for frogs, remote maintenance possible, motorised fill level regulation in the range of 50mm, boiler quick emptying, cleaning of the valves via cleaning tray possible, nozzles for valve external cleaning, glass bottles via centring tulip holder under filling valve and PET bottles with neck-handling adapter.