nm heilig bv used for sale

Name: Progressing cavity pump used Manufacturer: Netzsch Type: NMO45BY04S18B Year of construction: 2007 Material: Normal steel Drive motor: 7.5 / 8.6 kW operating temperature: 20 °C Dimensions: L 2350 x W 370 x H 400 mm Empty weight: approx. 100 kg Speed: 150 - 435 - 530 rpm Flow rate: 2 - 8-10 m3/h operating pressure: 16 bar Operating voltage: 400 / 690 V Protection class: IP 55 Condition: Used Tech. Documentation: No Price: On request

Gear Motor - Motor: Motovario, Gearbox: Neri Motori 2.2 kW

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

Pump with substructure and drive Flow rate min. 10 m³/h max. 70 m³/h Differential pressure min. 4.9 bar max. 0.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Stator Bolt Material: Galvanized Steel Geared Motor North, Type SK52-160LP/4-F(VL) TF F

Progressing cavity pump with substructure and drive Flow rate min. 4 m³/h max. 35 m³/h Differential pressure min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF

This offer is aimed exclusively at entrepreneurs within the meaning of § 14 BGB. The price is net plus 19% VAT. Welding Machine Type: Roll Seam Welding Machine Manufacturer: Nimak Type: NMP 7/100 Year of Make: 1971 Machine No. 71059 Rated power: 100 kVA at 50% ED Connected load: 175 kVA Primary voltage: 380V Open circuit voltage: 7.3V Sec. Str. dd/max. 8/33 kA Electrode force: 750 kp Frequency: 50 Hz up to 8.8 V at 6 ATU All information is made to the best of our knowledge, errors excepted. The sale is subject to exclusion of any warranty. The exclusion does not apply to claims for damages arising from grossly negligent or intentional breach of the Seller's duties or to any injury to life, limb and health. Further legal Information can be found on the website of Witzenmann GmbH under the keywords "Imprint", "Terms and Conditions" and "Data Protection".

This 5-axis MORI SEIKI NMV 5000DCG was manufactured in 2008. It features a maximum X-axis travel of 730 mm, Y-axis travel of 510 mm, and Z-axis travel of 510 mm. The machine includes a spindle speed of 12,000 rpm, a magazine capacity of 60 tools and an automatic pallet system. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NMV 5000DCG universal machining centre we have for sale. Contact us for further details.

General SKU221Y083 LocationBarneveld Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 With jacketcheck Eccentric Screw Pumps MaterialStainless steel General MakeNetzsch SerialD4095257/6300005469/0100 Year of construction2021Paints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoEccentric Screw PumpsOther feedDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed additivesIndustries > C ...

Frequency converter, frequency converter, drive inverter, controller, variable speed drive, servo controller, control, converter, PLC control, supply unit, inverter, servo drive, servo control, power supply -Manufacturer: Hauser, Servo Drive basic device -Type: 951-300000 NMD 10/B -Dimensions: 450/80/H350 mm -Weight: 7.3 kg

thermal exhaust air combustion system, exhaust gas filter system, exhaust gas filter system, exhaust gas filter, hot filter, industrial exhaust gas filter -Thermal exhaust air combustion plant: Manufacturer LTG Type 20000 Nm³/h -Protocols: regarding maintenance and emissions are available Documentation: complete -Combustion chamber temperature: 850° C -Heating fuel: Natural gas -Calorific value: 10 kWh/m³ -Connected load: 45 kW -Exhaust air volume: 20,000 Nm³/h -Max. solvent quantity: 1.5 g/m³ -Individual components: see photos

Flat geared motor, geared motor, electric motor, electric geared motor, bevel geared motor -Manufacturer: Defan, geared motor with drive shaft -Speed: 186 rpm -Transmission: Type NMRY090 i= 7.5 -Engine: Type YS100L2-4 -Power: 3 kW -Hollow shaft/shaft: Ø 35 mm / Motor shaft Ø 25 mm Dimensions see photos Protection rating: IP55 -Dimensions: 600/250/H330 mm -Weight: 38.2 kg

Color: Black Original packaging Price per unit = 19.00 € + VAT Pick-up and shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 21.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 30.00 € + VAT Pick-up or shipping available Shipping costs will be charged separately Item invoice due when ready for shipment

Color: Black Original packaging Price per unit = 40.00 € + VAT Shipping and pick-up possible Shipping costs will be charged separately Item invoice due when ready for shipment

General SKU284Y448 LocationBarneveld MakeVan Wijk &: Boerma Main Features MaterialStainless steel Volume360 Ltr. Motor0.37 KW Specified Features - Eccentric Screw Pump Capacity360 l/h With motor0,37 kW 230/400 V Inlet2x ø 23 mm Outletø 6 mm With jacketcheck Eccentric Screw Pumps MaterialStainless steel 1.4552 General TypeNM011BH02S12F Mach.No.218768 Floorspace0,2 x 0,8 m Total height0,25 m Weight50Paints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoEccentric Screw PumpsOther feedDyes & pigmentsMinerals & inorganicVan Wijk & BoermaIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > RubberIndustries > Chemical > AgrochemicalsIndustries > Chemical > Plastic & polymersIndustries > Food & Feed > Feed add ...

Part Number: 7995 SPECIFICATIONS - max planing width 240mm - max planing height 140mm 4 spindles: 1) horizontal bottom 240mm 5.6kW 2) vertical right 140mm 5.6kW 3) Vertical left 140mm 7.5kW 4) horizontal top 240mm, electrically adjustable up/down 0.37kW - 7.5kW - diameter of all spindles 40mm - All spindles adjustable up/down and right/left - 5 pulling, toothed, torsion shafts from above, including 1 double - 2 output rollers from above, rubber, pulling - metal roller at the bottom at the exit, pulling, split - pneumatically pressed rollers - 3 clamps on the side - electric setting of planing thickness 0.37kW - length of the introductory table top 2080mm - infinitely variable feed speed control on the inverter - feed on cardan shafts - 3.7kW feed motor - central lubrication - Extraction port diameters 4x125mm - Dimensions L/W/H 3600x1650x1700mm - weight about  ...

General SKU284Y449 MakeNetzsch TypeNM015BH04S24H Pressure Working pressure20 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity10—80 l/h With motor0,75 kW 230V With variable speed drivecheck With frequency invertercheck Inletø 43 mm Outletø 31 mm Eccentric Screw Pumps MaterialStainless steel 1.4571 (316Ti) General Mach.No.434615 Year of construction2011 LocationBarneveld Floorspace1,1 x 0,3 m Total height0,4 m Weight90 kgPaints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersFeed additivesDetergent & surf.Food additivesLubricants & oleoEccentric Screw PumpsOther feedDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > R ...

General SKU288S377 MakeNetzsch TypeNMD 668.62 No.2100310 Year of construction2006 LocationBarneveld Main Features MaterialStainless steel Volume1250 Ltr. Motor45 KW Specified Features - Dissolver Dissolvercheck Shaft length1200 mm Disc diameter450 mm Motor45 kW 380-420/660 -725 Volt With pans(1x) Capacity1250 ltr Pan sizesdia. 1150x1300mm Outletdia. 45mm With hydraulic liftingcheck Motor2,2 kW 400 volt (Ex) MaterialStainless steel General Floorspace2,3x1,6 M Total height2,4 M Weight1700 Kg CEcheckOils & fatPaints & coatingsDissolversOintmentsFine chemicalsOther chemicalCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicNetzschIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsMixers > DissolversIndustries > Pharmaceutical > OintmentsIndustries > Chemical > Fine ...

General SKU292W965 MakeNetzsch LocationBarneveld TypeNMD90 Main Features MaterialStainless steel Volume1350 Ltr. Motor84 KW Specified Features - Dissolver Dissolvercheck Shaft length700 mm Disc diameterMax 625 mm Between shaft and frame1100 mm With covercheck Motor84 kW, 380-415 volt, 1490 rpm (Ex) Speed mixing shaft310 - 780 rpm With pans2x Capacity1350 l. Pan sizesdia. 1500x1700 mm With hydraulic liftingcheck Motor1.1 kW, 220 V, 2845 rpm MaterialChromed steel, Stainless steel 1.4301 (304) General No.204.279 Year of construction1995 With switchgear(as is) Floorspace2,70 x 0,72 m Total height4,40 m Weight3400 kg ATEX designedcheckOils & fatPaints & coatingsDissolversOintmentsFine chemicalsOther chemicalCatalysts & fillersSolventsDetergent & surf.Other pharmaceuticsLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicNetzschIndustries > Food & Feed  ...

Netzsch NM 105.2S prograssive cavity pump 30kW 70m3/hour 12bar.

Aircooled chiller LENNOX NAC 420D NM1M 420.1 kW Cooling capacity: 420.1 kW / 119.45 tons (12/7 — 35°C) Year of manufacture: 2008 Options: Hydraulic module Refrigerant circuit: 2 pcs. Heat exchanger: Plate Condenser: Microchannel, Aluminum Compressors: 3 pcs. COPELAND ZP385KCE-TWD-524 (scroll) + 3 pcs. COPELAND ZP295KCE-TWD-524 (scroll) Type of refrigerant: R410a Number of fans: 8 pcs. (Frequency inverter) Hydraulic module: 1 pcs. water pump WILO DPL65/175-75/2, expansion vessel. Dimensions: 5.7x2.3x2.1 m Weight: 3702 kg Working hours: 22188/22188/22188 24499/24526/24502 h. Condition: Good

Automatic tube filling and closing machine for filling and sealing aluminium tubes. Machine is fitted with: - Automatic tube feeding from chute - Automatic tube orientation - Dosing unit with product hopper - Various format sets and spare parts Output up to 80 tubes/min. Note: The facility is not complete. The controls are missing.

Saw blade width: max. 110 mm Roll diameter: 1100 mm passage height 600 mm Opening width: 200 mm Number of feed rollers: 4 roll Adjustment: pneumatic Main engine: 22 kW Infeeding seed: max. 40 m / min,

Balancing valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M28/PCN 805 793 -Connection: 28 mm -Price: per piece -Number: 4 piece -Dimension package: 255/90/H90 mm -Weight: 1.1 kg/piece

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE 012/PCN 806734 -Connections: 1/2 ODF -Dimension box: 135/95/H50 mm -Weight: 0.3 kg.

RECON Typ VTR 251 2H HT 429278 / Specification SGE 02 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVE M10/PCN 806733 -Connection: 10 mm -Dimension box: 135/95/H50 mm -Weight: 0.2 kg

Balancing valve, shut-off valve, ball valve -Manufacturer: Alco, ball valve, unused, original packaging -Type: BVA 058/PCN 805 779 -Connection: 16 mm -Price: per piece -Quantity: 2 pieces -Cardboard dimensions: 220/80/H80 mm -Weight: 0.5 kg/piece

Line regulating valve, shut-off valve, ball shut-off valve -Manufacturer: Alco, ball shut-off valve, unused in original packaging -Type: BVA M12/PCN 015341 -Connection: 12 mm -Dimension box: 220/80/H90 mm -Weight: 0.5 kg

Heating fan, mobile heater, gas heater, gas blower -Power output: adjustable from 50 to 100 kW -Length: 560 -Width: 350 mm -Height: 500 mm -Gas type: Propane -Quantity: 1 available Price: per piece -Weight: 16 kg

Angle flange, flange, cable entry, cable protection -Nominal width: 48 mm -Protection type: IP 66 -universal: applicable -Packaging unit: 10 pieces -Price: per packaging unit -46x bags: 10 pieces each -Dimensions: -Weight: 1 kg/piece

Surveillance camera, video surveillance, receiver, transmitter, video transmitter, transmitter amplifier -Manufacturer: Ernitec, transmitter type BVT-65 orig -Voltage: 230VAC / 50-60Hz -Number: 3x transmitter available -Price per piece -Dimensions packaging: 180/130/H60 mm -Weight: 0.5 kg/pcs

Transformer, transformer, converter, single phase transformer, control transformer, safety transformer, current rectifier -Manufacturer: mayr, power supply/0801153 -Type: BV030189M -Power: 161W -Technical data: see photo nameplate -Dimensions: 110/90/H130 mm -Weight: 3.1 kg

RECON MWM TBD604-BV12, MWM TBG604-BV12 Part number: 1204 7301 Please note: we also have other various RECON parts of different manufaturers / types in stock. We are pleased to provide you with our current stock list. ---------------------------------------------------------------------- ----------- If you have any further questions do not hesitate to contact us

RECON Part number: 0212 5807 and 0212 5811 new Upper Part! ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Absolute rotary encoder, incremental rotary encoder with solid shaft -Type: BVS58N-011AVR0NN-0013 -Factory no.: 113845 -No.: 0425903 -Quantity: 3 available -Price: per package -Weight: 0.5 kg

Crankshaft Deutz BV12M 628 NEW Part number: 0406 2874 -all main journals sanded to 1st step level 209, 50 mm -all connecting rod pin standard dimensions: 175 mm -without counterweights and gear -incl. GL test ---------------------------------------------------------------------- ------- Please note: we also have other various RECON parts of different manufacturers / types in stock. We are pleased to provide you with our current stock list. If you have any further questions do not hesitate to contact us

Conveyor belt BVM; cleaned and tested; Width 1000mm; Length 2850mm; Self-management; Speed adjustable. Tape conveyor BVM 1000x2850; cleaned and checked; width 1000mm; lenght 2850mm; speed control; automatic control.

Gnocchi factory 1. Cooking kettle Glass pro3, 500 l, tilting, mixing 2. Bin hoist for 200 bins feeding the former 3. Former Sandore NF 100c 8.5 kw 4. Feeding conveyor for vibrating Tunel 5. Vibration tunnel Sarp str 410 4.7 kw 6. Waste and water separator Sarp Filtro 7. Feeding conveyor for multi head weightier, z type 8. Platform for weigher 5000x5000 mm 9. 10 head weigher BVBA 01AAH-WS 10. Packer Tiromat BL-150 ET422N 11. Ready product conveyor

Vacuum transport belt; State outdated; Length 2000mm; Working width 350mm; Speed adjustable; Forward or reverse running; new inverter; new conveyor belts; Stand allone. BVM vacuum transport band; condition rebuilt; lenght 2000mm; working width 350mm; speed adjustable; forward operation or reverse operation; new frequency inverter; new belts; stand allone machine.

SPECIFICATIONS: - Automatic workpiece blocking pneumatically controlled - Machine for the execution of slots of different lengths and depths for window parts, folding shutters and doors

Recon Part number: 0208 9754 Complete standard dimensions: 210/175mm incl. counterweights and gear incl. DNV-GL test Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!

RECON Part number: 0212 7795 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Dear's Sale, used 2 diesel engine Ulstein Bergen BVM-12 Brgds Hakan KUSCU +905323642509

RECON Part number: 0212 7791 ---------------------------------------------------------------------- ---------- Note: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. If you have any further questions, please do not hesitate to contact us!

Size Dn 350 Pressure class Pn10/16 A150 Body Steel Gjs 400 used Tractor No. B21-047508 Disc Stainless steel Cf 8m P.max bar 16 Bar Temp Min -10 Max 130 Pneumatic double acting Year of construction 2021 Epdm session