nh used for sale

Three-point wood chipper, drive PTO 540 – 1,000 rpm, 4-blade chipping disc, feed up to 160 mm, Chip length 15-50 mm, power requirement 18-60 kw. Machine weight approx. 600 kg. Oil motors for wood feed leaking, one flap on the feed funnel loose, no feed electronics installed, electrical emergency stop available. Other wood chippers available - also motorized machines. ------ Jodau Municipal, Environmental & Green Care Technology ------- Used machines for facility and sports field maintenance, gardening and landscaping, cemetery technology & winter service, sweeping work and disposal, environmental care, engines and more...

1 horizontally installed NH3 collection tank for the 4 chillers in the room Manufacturer: Witt Content: 2,254 l. outside with black insulating material surround. standing on frame with ammonia high-pressure valve with the Fittings.

2 identical NH3 Bitzer cooling machine systems Standing on sturdy frames supervised by Anderten Kälte-und Klima GmbH Type:OSKA 8571-K Year of construction 2006

Volume-dependent dual system, Additional title: Separator, condenser and control cabinet from 2010, Features: 1 NH3-separator, 2 cooling compressors, 1 evaporative condensor, 1 control cabinet

Div. fuses z.B Lindner new product for 30% reduction 6 PCs. original packed to 50.-NET. Others on request. Info under 0170 / 2204056 Mail to fa.raupp@t-online

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-41991-84

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-41991-85

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-41991-82

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-41991-83

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-41992-153

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-40104-132

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-41992-154

Equipped with: wifi, CO2 censor, Automatic bypass function, Defrost function, Humidity control function, LSD Control panel, Constant airflow function, Setting of the airflow balance speed, EC- Fans, Efficiency up to 95%, Energy label A, This is a new device including a 1-year warranty on parts. Delivery against payment in consultation with the supplier within the Netherlands possible. Auction-ID: A1-40104-131

X16374-151 Automatic Riveting Machine for M8 claw nuts Manufacturer: NAGAYAMA, Model: CB/NHF & NHF T-nuts, Year of Manufacture: 2015 Serial no YN-2015-10 Made in Japan

METALPRES NHM 3006 hydraulic guillotine shears built in the Czech Republic in 2000, are used for precision cutting of black or acid-resistant steel sheets with a maximum length of 3000 mm. The NHM 3006 T guillotine shears have been regularly serviced and upgraded throughout their lifetime. In 2023, a general overhaul was performed with a net value of approximately PLN 16000, during which seals, clamps, controls, electrical installation with cabinet were replaced and the knives were sharpened. The price of the machine also includes a rack with saw for steel and a rack for sheet metal shown in the photos. The total weight of the METALPRES NHM 3000 3M machine is 2000 kg. Technical specifications of the METALPRES NHM 3006 guillotine shears - maximum cutting length: 3000 mm - maximum workpiece thickness (acid-resistant steel): 5 mm - maximum workpiece thickness (black steel): 6 mm - di ...

RAFFEL NH3 – 722 m² Brand:RAFFEL Type:NH3 – 722 m² Stock number:M23-2490 Cooling capacity:120 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:5100 x 2260 x 5060 mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 722 m2. Visit our website: used-refrigeration

RAFFEL NH3 – 648 m² Brand:RAFFEL Type:NH3 – 648 m² Stock number:M23-2489 Cooling capacity:105 kW Application:Freezing Number of fans:Frieren Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4650 x 2250 x 5080 (5340) mm Number in stock:2 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 648 m2. Visit our website: used-refrigeration

RAFFEL NH3 – 554 m² Brand:RAFFEL Type:NH3 – 554 m² Stock number:M23-2493 Cooling capacity:90.0 kW Application:Freezing Number of fans:3 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:4600 x 2000 x 5000 mm Number in stock:1 piece(s) Price:Quotation request Description: Nice Raffel Ammonia evaporator with 3 fans. Heat exchange surface is 554 m2. Visit our website: usded-refrigeration

RAFFEL NH3 – 378 m² Brand:RAFFEL Type:NH3 – 378 m² Stock number:M23-2491 Cooling capacity:60.0 kW Application:Freezing Number of fans:2 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:3900 x 1850 x 5060 mm Number in stock:1 piece(s) Price: Quotation request Description: Nice Raffel Ammonia evaporator with 2 fans. Heat exchange surface is 378 m2. Visit our website: used-refrigeration

RAFFEL NH3 – 276 m² Brand:RAFFEL Type:NH3 – 276 m² Stock number:M23-2492 Cooling capacity:45 kW Application:Freezing Number of fans:2 Fin spacing:12 mm Defrost:Hot gas Refrigerant:R717 (NH3/Ammonia) Dimensions:3200 x 1850 x 5160 mm Number in stock:1 piece(s) Price: Quotation request Description: Nice Raffel Ammonia evaporator with 2 fans. Heat exchange surface is 276 m2. Visit our website: used-refrigeration

This 5-axis OTC Daihen NH52-NEFC robot arm was manufactured in 2018. Ideal for complex welding tasks, it offers precision and flexibility in various applications. Consider the opportunity to buy this OTC Daihen NH52-NEFC robot arm. Contact us for more information.

This 4s MORI SEIKI NHX 5000 was manufactured in 2011. It features a dual pallet system with a pallet size of 500 × 500 mm and a maximum pallet load of approximately 500 kg. The spindle speed reaches up to 12,000 rpm, with a tool magazine capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the MORI SEIKI NHX 5000 horizontal machining center we have for sale. Contact us for further details.

This 4-axis DMG MORI NHX 5000 was manufactured in 2017. It features a maximum spindle speed of 15,000 rpm and a travel of 730 mm in both the X and Y axes, with a Z-axis travel of 880 mm. The machine includes a robust pallet size of 500 x 500 mm and a tool capacity of 40 tools. If you are looking to get high-quality machining capabilities, consider the DMG MORI NHX 5000 horizontal machining centre we have for sale. Contact us for further details.

Used machine DMGMORI NHX6300 Machine type: CNC machining center horizontal Model No.: NHX6300 Manufacturer: DMGMORI Control: CELOS MAPPS Year of Make: 2021 Location: Germany #001396 TECHNICAL DATA: Travels: X-axis: [mm] 1050 Y-axis: [mm] 900 Z-axis: [mm] 1030 B-axis 0.001° Rapid traverse: (X/Y/Z) [m/min.] 60 Speed range: [1/min.] 12,000 Drive power: [kW] 55/30 Tool holder: HSK100 Tool Changer Tool Positions: 120 Pallet system Number of pallets: 2 Pallet size: [mm] 630 x 630 Machine weight: [kg] 18,700 Facilities Control F31iB with CELOS spindle cone HSK-A100 preparation for coolant system by the spindle rotary table with full-fledged 4th axis 120-fold tool magazine (HSK-A100)- Coolant Washer Nozzles for Mist Separator INTERLIT TMF300/980 Setup Station Connection Compact filter system 70 bar-INTERLIT coolant cooler 15 kW in-machine measuring system (spindle ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmDimensions (L x W x H)2,72 x 4,22 x 2,52 mSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z560/560/660 mmPalett changer with2 PalletMaximum load (table centre)400 KgSwivelling range360 x 0,001 degreeTable size400x400 mmDrive power (100% DC)18,5 kWWeight approx.7600 Kg(For Europe) European Edition(For Europe) European Edition (NHC4000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signalInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mountin ...

Cell with TIG-OTC-NH52-NEFC welding robot Country of origin of the cell: Italy Year of production of the cell: 2017 Country of origin of the robot: Japan Brand: OTC NH5 Year of manufacture: 2016 Number of axes: 6 Reach: 866 mm Load capacity: 5 kg Control: OTC FD 11 Source: OTC DA 300-P Cell dimensions: Length 3500 mm 1900 Width mm Height 2400 mm

Key data: 880 mm, 730 mm, 730 mm

GENERAL Project No.: 905698 Quantity: 1 pcs. Manufacturer: DMG MORI Type: NHX 5000 Control: Siemens 840 D solutionline Year of Make: 2016 Condition: Used machine Approx. (hrs): 26,341 Spindle in approx. (hrs.): 9,666 DESCRIPTION MILL Travel in X 880 mm Travel in Y 730 mm Travel in Z 730 mm Max. rapid traverse speed in X/Y/Z 60/60/60 m/min Max. feed speed in X/Y/Z 6/6/6 m/min Tool holder HSK 63 Max. speed milling spindle 20000 1/min Max. power at ED 10-40/100% 15/11 kW Tool magazine 40 stations Rotating pallet changer (set-up station can be rotated by motor) 2-fold Max. workpiece weight per pallet 500 kg Rotary table NC-controlled Clamping hydraulics OTHER EQUIPMENT IR Workpiece Probes Tool breakage detection by means of a probe Splash protection cladding with fully encapsulated working area Rotating viewing window Lighting in the work area Scrap ...

GeneralHorizontal machining center; Control: Control M730BM CharacteristicsSpeed max.15000 rpmWeight approx.11100 KgSpindle taperBT 40 Tool Magazine with40 PositionsRapid feed X / Y / Z60/6060 m/minMovement X / Y / Z730/730/880 mmPalett changer with2 PalletMaximum load (table centre)500 KgSwivelling range360 x 0,001 degreeTable size500x500 mmDrive power (100% DC)18,5 kWDimensions (L x W x H)3,1 x 4,86 x 2,84 m(For Europe) European(For Europe) European Edition (NHC5000) Full 4th axis rotary table Interface for Through-spindle coolant system (7.0 MPa, Variable Pressure Steps) (KNOLL) Coolant gun for setup station side In-machine measuring system (spindle) optical signal transmissioInterface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit)Interface for Through-spindle Coolant System (7.0 MPa, Variable Pressure Steps) (KNOLL/ Interlit) Interface for mou ...

Auxiliary switch, automatic circuit breaker, fuse, line switch, line circuit breaker, switch disconnector, terminal plate -wöhner: QCB NH00 160A switch disconnector -Price: per piece -Number: 2 pieces -Dimensions: 200/110/80 mm -Weight: 1.2 kg/piece

NH fuse switch disconnector -NH2-400 A -500 V-630 A-AC22 B -690 V-630 A-AC-21B -Dimensions: 100/660/H190 mm -Weight: 5 kg

5-axis machining center Mori Seiki NHX 5000 Year of construction 2011 (bought new in 2013) Hours10768 Processing time 7172 hours Electricity one hour 29288 With few operating hours, used only for single part to small series production, mainly for special mechanical engineering The specifications are as follows: Travels: Cylinder Ø 500 x 700 Control M730BM (Mapps2) Speed 10,0000 rpm. Tool holder SK40 DIN 69871 Tool changer 60-fold Pallet changer 2-fold Accessories: Documentation Internal cooling Knoll 50 bar Conveyor Activation to 400 tool positions Pine pallet with long zero point clamping system Lang tensioning tower approx. 100 pieces of tool holders SK40 An on-site inspection is possible at any time by appointment.

1 complete NH³ refrigeration system with 2 identical refrigeration systems, type FKS/S-210 and 2 NH3 Bitzer cooling machines type: OSKA 8571-K 1 horizontal ammonia Käte collection tank, capacity 2,254 l, manufacturer is Witt, assembled by Witt constantly maintained by Anderten Kälte-und Klima GmbH not yet dismantled, stands unchanged on the site as in production

This COMAU C4G NH4 – 200 robot arm was manufactured in 2004. It is part of a set of 4 refurbished industrial robots, fully serviced and in excellent working condition. These units have been mechanically and electronically overhauled, ensuring reliable performance. Ideal for automation, assembly, or handling applications. Contact us for more information about this machine.

This 4-axis DMG MORI NHX 8000 horizontal machining centre was manufactured in 2023. It features a Siemens S840D control with CELOS, XYZ travels of 1,400 / 1,200 / 1,350 mm, and a pallet size of 800 x 800 mm. The spindle operates at 16,000 rpm with a power of 85 kW and uses an HSK-A100 taper. Tool storage capacity is 60, and it includes a Renishaw OMP60 probe. For more information about this horizontal machining centre, please reach out to us.

This DN SOLUTIONS NHP 5000 Horizontal Machining center was manufactured in the year 2021. It is equipped with a FANUC 31I-MODEL B control unit and has 4 axis. The machine has a spindle speed of 15000 rpm.

Horizontal BAZ DMG MORI NHX 4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar Chip conveyor Renishaw 3D - Pushbutton

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

Key data: 560 mm, 560 mm, 660 mm

Horizontal BAZ DMG MORI NHX-4000 with 2-fold pallet changer Year of Make: 2017 Control: Celos with Sinumerik 840Dsl Operate Program running hours: 21,000h Technical data: Spindle speed: 10 - 20,000 min-1 (motor spindle speedMASTER)® Drive power: 35/25 KW Torque: 130/85 Nm Tool holder: HSK 63 Number of magazine slots: 60 - Ring magazine Travels: X-axis: 560mm Y-axis: 560mm Z-axis: 660mm C-axis: 0.001° Pallet size: 400x400mm Accessories: 2-fold pallet changer Coolant system for IKZ 70bar - 900 litre tank - paper belt filter Chip conveyor Preparation Renishaw 3D - Probe

x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...

x-travel: 560 mm y-travel: 560 mm z-travel: 660 mm Control: M 730 BM MAPPS IV distance spindle center to table: 80 - 640 mm distance Spindlenose and center of table: 70 - 730 mm Main spindle:: max. spindle speed: 12.000 min/-1 power capacity - main spindel: 15 / 11 kW tool taper: SK 40 spindle diameter in front bearing: 80 mm pallet changer:: numbers of pallets: 2 pos. work height max.: 1.050 mm size of pallet: 400 x 400 mm max. workpiece weight: 400 kg max. workpiecediameter: 630 mm Max. workpiece - hight: 900 mm B-Axis: 0,001 ° Indexing-time 90°: 1,3 sec change time of pallets: 8,0 sec Tool-Presetter:: number of toolpositions: 60 pos. tool taper: SK 40 max. tool diameter: 70 mm max. tool-dia with free toolbox: 170 mm max. tool length: 450 mm max. tool weight: 8 kg change-time tool to tool: 0,9 sec change-time chip to chip: 2,8 - max. 9,9 sec feeds:: feed speeds: max. 60.000 mm/mi ...

Used machine CNC machining center horizontal Manufacturer:DMGMORI Type:NH4000DCG Year of construction:2021 Control Type:FANUC F31iB Origin: Japan Location:Germany Delivery Time Technical data Traversing range X-axis approx. 560mm Y-axis approx. 560mm Z-axis approx. 630mm Table 360° 1° Workpiece diameter approx. 630mm Workpiece weight max. approx. 400kg Speed max. approx. 14,000 rpm Spindle motor approx. 18.5/11KW Number of tool positions approx. 40 Rapid traverse approx. 50m/min Mounting Taper BT40 Compressed air bar,L/min approx. 5, 300 bar,L/min Power consumption approx. 34kVA Footprint L x W x H approx. 2,360×3,914x2,711m Machine weight approx. 9,600 kg Automatic Rotary APC Tool Holder: BT40-Max. Spindle speed 14,000 min-1,-18.5/11 kW (10min/100% ED)-Number of Tools: 40 (Chain Type)-Table Indexing 1° Scraper Belt Conveyor with drum filter preparati ...

gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 030 -Speed speeds: approx. 68 rpm i= 20 -Engine manufacturer: DRdrives Type 63A-4 -Power: 0.12 kW / 1360 rpm -Hollow shaft: Ø 14 x 60 mm -Number: 2x gear motor available -Price: per piece -Dimensions: 288/155/H125 mm -Weight: 5.3 kg/piece

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV -Speeds: approx. 100 rpm -Manufacturer motor: DRdrives type 63A-2 -Power: 0.18 kW / 2720 rpm -Hollow shaft: Ø 14 x 60 mm -Dimensions: 288/155/H125 mm -Weight: 5.3 kg

Gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 040 -Speeds: approx. 183 rpm i= 7.5 -Manufacturer motor: DRdrives type 71C-4 -Power: 0.55 kW / 1375 rpm -Hollow shaft: Ø 18 x 80 mm -Number: 2x gear motor available -Price: per piece -Dimensions: 340/175/H155 mm -Weight: 9.2 kg/pc.

Refrigeration Compressor, Refrigeration Machine, Refrigeration Compressor, Refrigeration Unit, Refrigeration Compressor, Compressor, Motor Compressor, Separation Hood Compressor, Separation Hood Compressor, Refrigeration Unit, Hermetic Compressor -Manufacturer: Mitsubishi, compressor Hermetic Compressor type NH465YJE -Power kW -Voltage: 380-415/400-460V/50/60Hz -Technical data: see photo of nameplate -Dimensions: 310/200/H410 mm -Weight: 27 kg

gear motor, electric motor, three-phase motor, electric gear motor -Manufacturer: Motovario, gear motor type NHRV/ 030 -Speed speeds: 45 rpm i= 30 -Engine manufacturer: DRdrives Type 63A-4 -Power: 0.12 kW / 1360 rpm -Hollow shaft: Ø 14 x 63 mm -Number: 1x gear motor available -Dimensions: 290/150/H140 mm -Weight: 5.4 kg

Auxiliary switch, circuit breaker, fuse, line switch, circuit breaker, load break switch, terminal board -Manufacturer: wöhner, fuse switch disconnector switch disconnector -Type: FSD-NH2 -Fuse: 3x 250A -Number: 2x load-break switches available -Price: per piece -Dimensions total: 290/205/H150 mm -Weight: 5.2 kg/piece

Auxiliary switch, circuit breaker, fuse, line switch, circuit breaker, load break switch, terminal board -Manufacturer: wöhner, fuse switch disconnector switch disconnector -Type: QCB NH1 250A -Fuse: 3x 160A -Number: 1x load-break switch available -Dimensions total: 250/180/H115 mm -Weight: 3.0 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Moeller, NH fuse switch disconnector 100 A -Type: GSTA00-40-60AOU NH00-100A -Quantity: 1x load break switch available -Dimensions: 170/105/H130 mm -Weight: 0.9 kg

Auxiliary circuit breaker, circuit breaker, miniature circuit breaker, load break switch, load disconnector, power switch, power disconnector, auxiliary switch, main switch, disconnector, fuse-switch disconnector -Manufacturer: Eaton, NH fuse switch disconnector 160 A -Type: GSTA00-160 NH00-160A -Quantity: 1x load break switch available -Dimensions: 170/105/H850 mm -Weight: 0.7 kg