new tech used for sale

VC60/50 TECH PRO (ECODRIVE) (50 ton & 18mm screw)

Sale of the machine and the robot, it is also possible to sell the hopper with the dyer + 2x term. The machine has not been worked on for 2 years, the machine is plugged in and there is an opportunity to test it. + Robot Engel ERC 13/1E

Screw diameter: 40 mm Shot weight: 263.55 g Max. Injection volume: 251 cmᶟ Max. screw stroke: 200 mm Injection ratio: 198 cmᶟ / sec Closure components: Closing force: 130 t Clearance between columns: No columns Max dimensions of the table plates: 750x700 mm Ejector: hydraulic Closing system: hydraulic Control: CC 100 EBIAS 9.42 Working hours: 73276 Robot: ER-HLI 51 VC EP5

Technological line for tire pyrolysis Total capacity: 70m3. Load capacity: 20-30 tons Manufacturer: a company from China, but the line has been adapted to European requirements. Year of production 2020. Tire pyrolysis efficiency from one ton of used tires = 45% by weight of heavy oil + approx. 33% of soot and approx. 10-12% of steel cord. The pyrolysis cycle from loading to loading is about 24 hours to 36 hours. depending on workflow and peripheral devices. If the tires are loaded in bulk, this reactor will fit about 16-18 tons. If they are baled in the press, it will fit about 25-30 tons. The line is assembled and has performed 18 test cycles. But because the business permit was not extended, it has not been working for a year.

Offer up to 2 UTX Techlon 200 round slings (polyester) here. WLL: 20000kg EWL: 5m Unfortunately, they have been dragged over the hall floor a few times and are now quite dark, but they are technically very well preserved, have no cracks or cuts and the blue shield is completely present. Last test 01/2021, no more use after 07/2021

Key data: 900 kN, 22 mm

warehouse no.: 503415 manufacturer: ENGEL type: VICTORY 80-90 tech controller: CC200 year of construction: 2009 operation hours: 70171 h clamping force: 900 kN size of mould plates h x v: 740 x 680 mm min. mould height: 300 mm max. open daylight: 800 mm opening stroke: 500 mm screw diameter: 22 mm swept volume: 38 ccm injection pressure: 2060 bar measures of machine l x w x h: 4.4m x 1.5m x 2m total weight: 6700KG equipment included screen text german CEE-socket 16A core pulling hydraulically 1x air valve 2x machine incl. water flow regulator machine without material hopper Anti vibration mounts Schuko-socket 10A mould heating 4x

Key data: 1800 kN, 460 g/PS, 55 mm

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

CNC machining center SCM Tech 99 Working area x-y-z: 3000 x 1200 x 200 mm Drilling unit 12 + 6 spindles Sawing unit 0 - 90 degrees rotatable NC Vertical milling unit ISO 30 6.6 kW Additional. Stop working range I = 3780 mm Vacuum pump 100 m³/h Automatic tool changing device TR 7 Control/Control Cabinet PC Control 8.2 TFT-V6A Color Monitor Software XILOG TELE SOLVE - Service Safety device with bumper and protective grille CE version TV work table with cushions Electrospindle renewed in 2023 Machine is NOT ready for operation - control system defective Ex location NET € 5.900,00

Engel Victory 3550/500 tech Injection Moulding Machine Machine is without column Robot and dryer are not included in the price CC200 control system Number of working hour : 31 000

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

Process water chiller / chiller / chiller water cooled, Type: TWEevo Tech 381 P3 MTA S.p.A. TWEevo Tech 381 P3 are air-cooled compact water chillers that are suitable for outdoor installation (-5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 60 ltr., built-in P3 pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 72.2 [20.5 tons cooling] Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 12.3 Available pump pressure (bar) 3.46 Cooling water temp. Outlet/Entry (°C): 45 / 40 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 39 Max. current (A) 66 Starting current circuit (A) 234 Protection class: IP54 Dimensions: Length (mm) 2790, Width (mm) 1150, Height (mm) 2020, Weight empty / filled (kg) 975 / 1385 Connection R ...

Heat pump / chiller air-cooled, Type: Taurus TECH HTAT 040 HE MTA S.p.A. Heat pump / chiller Taurus TECH HTAT 040 HE (reversible) with hydronic kit, storage tank + pump P15 + fairing hydraulics. Heating capacity kW 99.3 Cold water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 17.2 Available pump pressure bar 0.966 Ambient temperature +7 °C Cooling capacity kW 84.5 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 14.4 Available pump pressure bar 1.24 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 47 Max. current (A) 79 Starting current circuit (A) 263 Protection class: IP54 Dimensions: Length mm 2510, Width mm 1110, Height mm 2270 Weight kg 1113 Connection Rp 2" Serial No.: 2200392018 Year of construction 2022 Condition: Optical 1, Technically ok (Stock  ...

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...

Heat pump / chiller - switchable - water / water cooled, Type: OCEAN Tech HOCT 200 MTA S.p.A. OCEAN Tech HOCT 200 are water-cooled heat pump / chiller for indoor installation without hydraulic circuit (pump, accumulator) incl. crank pan heating, phase monitoring. An external dry cooler unit is not included in the offer. Cooling capacity kW 53.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.25 Cooling water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 13.5 Heating capacity kW 67.9 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 9.51 Cooling water temp. Exit/Entry: 45 / 40°C Volume flow m³/h 11.7 Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 24 Max. current (A) 40 Starting current circuit (A) 162 Protection class: IP22 Dimensions: Length mm 1735, Width mm 660, Height mm 120 ...

Air cooler / process chiller / chiller air-cooled, Type: TAEevo Tech 251 P3-20 MTA S.p.A. TAEevo Tech 251P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulating pump. Cooling capacity kW 50.4 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 8.59 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 26.99 Max. current (A) 45,79 Starting current circuit (A) 144.38 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1023 Connection Rp 2 " Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty Serial No.: 2200342104 Year of co ...

ENGEL 50 ton machines. Year 2007, 2010, 2017 each 1 unit

Monoblock filling machine Bottle filling machine Used MONOBLOCK TECH-PACK NZ-2500 filling machine TECH-PACK NZ-2500

Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...

Heat pump / chiller air-cooled, reversible, reversible Type: CYGNUS TECH HCY 031 PT1 MTA S.P.A. CYGNUS TECH HCY 031 PT1 are compact heat pumps / water chillers designed for outdoor installation up to -10°C suction temperature. Including crank pan heating, buffer tank and built-in P1 circulation pump. Heating capacity kW 11 Heating water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 1.93 Available pump pressure bar 1.36 Ambient temperature 7 °C Cooling capacity kW 9.22 Cold water temp. Exit/Entry: 7 / 12°C Volume flow m³/h 1.56 Available pump pressure bar 1.54 Ambient temperature 35 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 5.4 Max. current (A) 9.7 Starting current circuit (A) 44.5 Protection class: IPX4 Dimensions: Depth mm 1404, Width mm 580, Height mm 1293 Weight kg 273 Conn ...

Heat pump / chiller air-cooled, Type: Taurus TECH HTAT 040 HE MTA S.p.A. Heat pump / chiller Taurus TECH HTAT 040 HE (reversible) with hydronic kit, storage tank + pump P15 + fairing hydraulics. Heating capacity kW 99.3 Cold water temp. Exit/Entry: 45 / 40°C Flow rate m³/h 17.2 Available pump pressure bar 0.966 Ambient temperature +7 °C Cooling capacity kW 84.5 Cold water temp. Exit/Entry: 7 / 12°C Flow rate m³/h 14.4 Available pump pressure bar 1.24 Ambient temperature 32 °C Refrigerant R 410A Electrical data: Voltage V 400, frequency Hz 50, phases Ph 3 Max. power consumption (kW) 47 Max. current (A) 79 Starting current circuit (A) 263 Protection class: IP54 Dimensions: Length mm 2510, Width mm 1110, Height mm 2270 Weight kg 1113 Connection Rp 2" Serial No.: 2200392018 Year of construction 2022 Condition: Optical 1, Technically ok (Stock  ...

cutting diameter: 560 mm saw band length: 7.260x54x1,6 mm Control: mit 99 Programmen work height max.: 650 mm Chip coveyor: inkl. power capacity - table: 10 HP sawing motor: 650 kW weight of the machine ca.: 4.800 kg dimensions of the machine ca.: 3.400x2.050x2.380 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Air cooler / process chiller / chiller air-cooled, Type: TAEevo Tech 251 P3-20 MTA S.p.A. TAEevo Tech 251P3-20 are air-cooled compact water chillers suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 350 ltr. and built-in P3 Circulating pump. Cooling capacity kW 50.4 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 8.59 Available pump pressure (bar) 2.61 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 26.99 Max. current (A) 45,79 Starting current circuit (A) 144.38 Protection class: IP54 Dimensions: Length (mm) 2250, Width (mm) 866, Height (mm) 2054, Weight (kg) 1023 Connection Rp 2 " Price: on request in Euro (plus VAT from Nettetal) – 3 months warranty Serial No.: 2200342104 Year of co ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 161 P3 MTA S.p.A. TAEevo Tech 161 are air-cooled compact water chillers that are suitable for outdoor installation. Including crank pan heating, phase monitoring, buffer tank 255 ltr. and built-in P3 Circulating pump. Cooling capacity kW 38.6 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 6.58 Available pump pressure (bar) 2.59 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 21 Max. current (A) 36 Starting current circuit (A) 204 Protection class: IP54 Dimensions: Length (mm) 1862, Width (mm) 761, Height (mm) 1437, Weight (kg) 666 Connection Rp 1 1/2" Serial No.: 2200401928 Year of construction 2023 Condition: Optical 2, Technically ok used (Subject to technical changes and prior ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically  ...

Process chiller / chiller air-cooled, Type: TAEevo Tech 802 P3-20 MTA S.p.A. TAEevo Tech 802 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (from -20°C to +46°C). Including crank pan heating, phase monitoring, electronic fuel injectors, buffer tank 678 ltr. and built-in P3 circulation pump. Cooling capacity kW 159 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 27.1 Available pump pressure (bar) 3.13 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 79.48 Max. current (A) 142.2 Starting current circuit (A) 286.2 Protection class: IP54 Dimensions: Length (mm) 3535, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2192 Connection Rp 3" Serial No.: 2200356834 Year of construction 2020 Condition: Optical 2 , Technically  ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...

Process air cooler/ chiller/ chiller, air-cooled, Type: TAEevo Tech 902 P3 MTA S.p.A. TAEevo Tech 902 P3 are air-cooled compact water chillers that are suitable for outdoor installation (from -5°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 950 ltr. and built-in P3 circulation pump. Cold water outlet temperatures from -10°C to +30°C can be adjusted. Cooling capacity kW 178 Cold water temp. Exit/Entry (°C): 7 / 12 Volume flow (m³/h) 30.4 Available pump pressure (bar) 3.16 Ambient temperature (°C) 32 Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 90 Max. current (A) 160 Starting current circuit (A) 365 Protection class: IP54 Dimensions: Length (mm) 4655, Width (mm) 1250, Height (mm) 2151, Weight (kg) 2907 Connection Rp 3" Serial No.: 2200360489 Year of constru ...

This Hwacheon HI-TECH 230B YMC Lathe was made in 2018 in Korea and has 3370 production hours, of which 2040 are spindle hours. It is equipped with a FANUC Series 0i-TF control unit. The machine has a spindle speed of 3500 rpm.

Description mold holder planes 740 X 680 New screw and barrell Sprue removal robot ENGEL mod. ER-USP 5 year:2006 pieces falling chute with waste selector

Closing force: 180t, weight: 12.2t, operational hours counter: 24,492h, with Handling Sepro S 5.35, fence, conveyor and documentation, an inspection is possible.

Weight: 9.1t, the machine is leaking and the control card is missing.

Process refrigeration machine / chiller air-cooled, Type: TAEevo Tech 402 P3-20 MTA S.p.A. TAEevo Tech 402 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 500 ltr., built-in P3 Circulation pump and condenser pressure control. Cooling capacity kW 96.1 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 16.5 Available pump pressure (bar) 3.46 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 48.89 Max. current (A) 81,55 Starting current circuit (A) 176.12 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1701 Connection Rp 2"1/2 Serial No.: 2200371822 Year of construction 2021 Condition: Opti ...

Process refrigeration machine / chiller air-cooled, Type: TAEevo Tech 402 P3-20 MTA S.p.A. TAEevo Tech 402 P3-20 are air-cooled compact water chillers that are suitable for outdoor installation (-20°C to +46°C). Including crank pan heating, phase monitoring, buffer tank 500 ltr., built-in P3 Circulation pump and condenser pressure control. Cooling capacity kW 96.1 Cold water temp. Exit/Entry (°C): 7 / 12 Flow rate (m³/h) 16.5 Available pump pressure (bar) 3.46 Ambient temperature (°C) 32, Refrigerant R 410A, Electrical data: Voltage V 400, Frequency 50 Hz, Ph 3 phases, Max. power consumption (kW) 48.89 Max. current (A) 81,55 Starting current circuit (A) 176.12 Protection class: IP54 Dimensions: Length (mm) 3298, Width (mm) 1255, Height (mm) 2119, Weight (kg) 1701 Connection Rp 2"1/2 Serial No.: 2200371822 Year of construction 2021 Condition: Opti ...

BIESSE TechnoLogic through-hole drilling machine Drilling on 4 sides

Key data: 1800 kN, 460 g/PS, 55 mm

ENGEL victory 1050/180 tech Year of construction: 2016 Control type: Engel CC 300 Operating hours: 14200 h in fully automatic mode Injection unit Screw diameter: 55 mm Injection weight in PS: 460 g Max. displacement: 510 ccm Spec. Spray pressure: 1615 bar Clamping unit Clamping force: 1800 kN Aperture travel: 750 mm Tool installation height min./max. : 500/750 mm Max. plate spacing: 1250 mm Accessories: Euromap 67 Robot Interface Ecodrive Bimetal cylinder Core pull 4 x Tool heater 8 x 2. Servo motor for parallel movement

2005 model little used Very clean plastic injection machine Injection molding machine Engel Victory 500/150 Pro Tech Closing force - 150 tons Year: 2005 Column passage: 740 x 680 mold holder shelves Screw diameter: 40 Injection volume - 251 ccm Min/Max mold thickness: 300 Jacks: 1 Euromap: 500/120 Moving floor movement: 507 Min/Max die height - 300/900 mm Machine weight - 9600 kg Opening path - 600 mm Injection pressure - 1302 bar Machine with robot and safety cage Injection size - 231 g Roller dimensions - 750X520 mm Oil tank capacity - 450 liters

CNC lathe Manufacturer: Hwacheon Type: Hi-Tech 300 Year of construction: 2006 CNC Control: FANUC-Series 18i-TB Turning diameter max.: 380 mm Turning diameter over bed: 600 mm X-axis travel: 280 mm Revolver: 12-speed Dimensions: 3,300 x 1,900 mm Weight: 8,500 kg

Hydraulic press brake: DERATECH Belgium type Technica Plus 160-30, rb: 2009. Bending length: 3100 mm; Between columns: 2650 mm Loading: 2350mm, stroke 180mm; Pressure: 160 t CNC controlled press Cybelec DNC 880S, 3D graphics, Polish language. Controlled axes -Y1-Y2-X-R + hydraulic table bend compensation. Machine weight 10 t. Drives 11 kW. Tools - complete set, Amada standard tools - 4 SLOT MATRIX + PUNCH. Full original DTR, workplace health and safety instruction in Polish.

Manufacturer ENGEL Type VICTORY 330/150 TECH PRO Clamping Force [tons] 150 Manufacturing Year 2003 Screw Size [mm] 30 Number of aggregates 1 Screw Type WS10 The minimum height of the mold [mm] 300.0 weight [kg] 9100 installed power kW 47 length mm 5193 width mm 1700 height mm 2000 occupied area of 8.8 m2 occupied area with a cage 13.6 m² oil filter HC35 - SMX10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 6 CE document 49834 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-18 UDT external battery revision 30/04/2021 UDT internal revision of the battery 05.2023 UDT battery registration number N2328017536 MC49 robot (UTM-750 TW) Diagrams office E v Schematics office H v Machine diagrams E v Ma ...

Manufacturer ENGEL Type Victory 500/150 Tech Clamping Force [tons] 150 Manufacturing Year 2005 Screw Size [mm] 40 Number of aggregates 1 Screw Type TW02.1_650 D40 LD20 G1.2 WS8 1180 The minimum height of the mold [mm] 300.0 weight [kg] 9600 installed power kW 39 length mm 5196 width mm 1804 height mm 2333 occupied area 9.4 m2 occupied area with a cage 14.9 m² oil filter HC28 - SM10 oil tank capacity upper 450 hydraulic oil quantity 450 the viscosity is 46 recommended viscosity 46 NAS purity class on July 12, 2012. 5 date of last oil change II.20 CE document 158323 hydraulic pump 1 RKP 80 EHV hydraulic pump 2 RKP 45 EHV insert clutch Rotex size 48 Hardness 98 Technical approval DTW-11-10 MC43 robot (W 721-0303) Diagrams office E v Schematics office H v Machine diagrams E v Machine diagrams H v Control card addresses CPU 1 Analog 4 Thermo 0 Control c ...

Closing unit Clamping force [kN] 1500 Dimensions of mounting plates (hxv) [mm] 850 x 750 injection unit Screw diameter [mm] 40 Injection volume [cm3] 251 Injection pressure [bar] 2019 Electric-hydraulic equipment Nominal power of the pump motor [kW] 23 Heater power [kW] 16 Dimensions and weight Net weight with control cabinet [t] 9.60 Dimensions (L x W x H) [m] 5.54 x 1.86 x 2.20

Engel Victory 500/120 Tech Shot weight: 231 g Closing force: 1,200 kN Screw diameter: 40 mm Injection pressure: 1300 (2020) bar Column spacing: No columns Plate size: 740 x 680 mm Type of control: CC200 German Installed power: 41 kW Working hours: 96,830 h Weight: 7400 kg Dimensions: 5 x 1.7 m A string of cores Robot nest

Engel Victory 750/150 Tech Injection weight: 354 g Closing force: 1,500 kN Screw diameter: 50 mm Injection pressure: 1427 (1909) bar Column spacing: No columns The size of the plates: 750 x 850 mm Type of control: CC200 German Installed power: 61 kW Working hours: 98 108 h Weight: 9500 kg Dimensions: 5.7 x 2 m A string of cores Robot nest

ULMA Atlanta HI-TECH horizontal flowpack machine Including : - A feeding belt - One Atlanta Flowpack Options: Double roll holder Motorised film unwind Printed film detection cell Conveyor suitable for transporting trays and bare products (peppers) (possibility to add a top side) Used to pack fruits and vegetables. Maximum output: 80 bags / minute The removal will be at the expense of the buyer and the machine will be taken back without any return/guarantee from our side.

Producer Engel Type Victory 750 / 180 tech Year 2004 Clamping unit Clamping force 180 ton Opening stroke 750 mm Distance between tie bars 960 x830 mm Mould height min. 500 mm Opening width 1250 mm Injection unit Screw diameter 45 mm Injection volume 318 cm³ Shot weight 302 g Injection pressure 1769/2360 bar Measurements and weight Machine weight 13500 kg Robot Producer Wittman Type W743 Year 2009

Producer Engel Type Victory 1350/300 Tech Year 2004 Clamping unit Clamping force 300 ton Opening stroke 900 mm Distance between tie bars 1100 x 1000 mm Mould height min. 400 mm Opening width 1300 mm Platen size (h x v) 1100 X 1000 mm Injection unit Screw diameter 55 mm Injection volume 617 cm³ Shot weight 588 g Injection pressure 1760/2180 bar Measurements and weight Machine weight 19400 kg Robot Producer Wittman Type W843 Year 2015

MTA TAEevo Tech 121 Air-cooled chiller / chiller /chiller TAEevo Tech 121-P3 Suitable for outdoor installation, integrated buffer tank 250 litres. Built-in P3 circulation pump Cooling capacity approx. 40 kW at water temperatures 7/12°C - outlet / inlet Pump pressure approx. 2.55 bar. Refrigerant R 407C Electrical power consumption 18 kW Max. operating current 32 A Length 2300mm x Depth 800mm x Height 1650mm Weight approx. 650 Kg. Machine is ready for operation. Test run possible in our warehouse. Price on request.

Inv. Num. : 7200 Type: VC 80/25 TECH Producer: Engel Created: 2007 Parameters: Clamping force: 25 t Panel dimensions: 470 x 280 mm Clamping force: 250 kN Screw diameter: 22 mm Machine length: 2720 mm Machine width: 1030 mm Machine height: 1760 mm Injection weight: 1800 kg