134,909 used machines on RESALE, but how to find them? Machine Search
Automation SheetMaster ? Standard configuration ? Suction frame 3000 x 1500 mm ? Peeler cup ? Vacuum sensor ? Central lubrication ? Sheet thickness sensor for double sheet check ? Control TASC 100 ? Clamp closing automatically ? Peeling system ? Suction plate module GripMaster 3000 x 1500 mm ? GripMaster Standard / 1600 ? With the following configuration: ? GripMaster Standard ? Scissor table 400 mm ? Sheet skeleton grippers with sensor ? Scrap skeleton pallet tiltable, 3000 x 1500 mm ? SortMaster Box ? TooMaster with 40 stations ? Store interface ? Safety devices for connection to storage system incl. 1st light barrier circuit
Loading unit: LMZ 3050 suitable for: L3030 and L3050 Max. sheet size, load/unload: 3000 x 1500 mm Max. sheet thickness, unload: 20 mm Cycle time: 230 sec
Loading device LoadMaster including loading station with fanning magnets Loading Sheet size: 3000 mm x 1500 mm Min. sheet size : 1000 mm x 1000 mm Max. sheet thickness: 25 mm Max. sheet weight: 900 kg
Standard configuration Basic system incl. peeling device and measuring device for sheet thickness Max. sheet weight 900 kg Loading Max. sheet size 3000 x 1500 mm Min. sheet size 1000 x 1000 mm Max. sheet thickness 25 mm Unloading Min. part size 150 x 150 mm Max. sheet thickness 20 mm ? Installation symmetrical ? WITHOUT loading station
Automation LiftMaster Compact Loading max. sheet format 3000 x 1500 mm min. sheet format 1000 x 1000 mm max. sheet thickness 25 mm max. sheet weight 900 kg Unloading min. parts size 150 x 150 mm max. sheet thickness 25 mm max. sheet weight 900 kg Basic system incl. synchronous loader, peeling device, measuring device for thick sheets, movable unloading rake, incl. loading / unpacking station Basic configuration: ? synchronous loader ? peeling device ? measuring device for thick sheets ? movable unloading rake ? raw material unpacking station ? maximal stack height on loading side is 90 mm ? maximal stack height on unloading side is 250 mm LiftMaster Compact options ? Additional pallet for finished parts ? Separation of thin sheets (s=1-2 mm) ? Scraper for slats (cleaning brush) ? Storage interface
Properties: Condition: fully functional, with traces of use Ideal for fast material transport Expertly dismantled and packed Manufacturer: Soco System Condition: Used Model/Type: Roles Drive type: Gravity System consisting of: 7 segments (5 x 1,980 mm, 2 x 960 mm) Total length: approx. 11,820 mm Total width: approx. 470 mm Conveying width/roll width: approx. 410 mm Segment length: approx. 1,980 mm Roll diameter: approx. 50 mm/plastic rolls Axle distance: approx. 90 mm (adjustable) Material: Steel/plastic Information about the frame: Height: approx. 100 mm Width: approx. 25 mm Stock: 11.82 meters Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined co ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 1200 meters overall width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Colour: Green & Grey Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available from August 2023 1200 meters in stock Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Material: Steel Length of the elements: approx. 2000 mm, approx. 2500 mm, approx. 3000 mm Total length: approx. 1200 meters overall width: approx. 530 mm Conveyor width/roller width: approx. 495 mm/ approx. 505 mm Roll cross-section: approx. 80 mm Wheelbase: approx. 200 mm Colour: Green & Grey Frame height: approx. 80 mm Frame thickness: approx. 05 mm Drive Type: Gravity Available from August 2023 1200 meters in stock Price per meter Roller conveyor Due to the excellent workmanship of the roller conveyor, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics For roller conveyors, belt conveyors, inclined conveyors or telescopes for loading and unloading your goods, we are ...
Tool pressetter Needs new computer and software Estimated price 2022 from producer € 4500,--
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Smugglers/smugglers conveyor technology Model: Round belt Condition: Used Year of construction: 2013 Manufacturer: AMI Fördertechnik Total width outside: approx. 1790 mm Total width inside: approx. 2300 mm Conveying width incl. motor: approx. 800 mm Conveying width without motor: approx. 710 mm Roller spacing/ axle spacing: 120/65 mm Frame height: approx. 125 mm Frame width: approx. 35 mm Colour: Light grey Including SEW motor (037 KW) Includes side guide Feet to be ordered separately. In stock: 1 Price per piece The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made soluti ...
Properties: Condition: fully functional, with signs of wear Ideal for fast material transport Expertly dismantled and packed Roller conveyor/ conveyor technology/ rollers Manufacturer: AMI Fördertechnik Year of construction: 2013 Condition: Used Drive type: Flat belt Total length: approx. 3800 mm Total width incl. motor: approx. 850 mm Total width without motor: approx. 690 mm Conveying width: approx. 600 mm Wheels/axle distance: approx. 65 mm Roll diameter: approx. 50 mm Steel frame Frame height: approx. 120 mm Frame width: approx. 40 mm Including 2 SEW motors (0.37 KW) In stock: 2 pieces Price per meter The conveyor technology has run all the way to dismantling. Thanks to the excellent workmanship of the conveyor technology, your material glides smoothly to its destination, even under high loads. Tailor-made solutions for your intralogistics F ...
Specifications: SEW Movigear Drive Motors/ Motor Quantity: 11 pieces available Manufacturer: SEW Eurodrive Condition: good (used) Power: 50Hz/
Complete solution for transporting bulk materials such as wood chips, wood pellets, shredded material, granules, etc. Aluminium flat conveyor belt incl. substructure Horizontal range 5,000mm (customizable) Feed height: horizontal (individual) Discharge height individually adjustable Construction: height adjustable, machine feet Conveyor belt width 600mm (customizable) We supply our conveyor belts in PVC, PU, felt or rubber. PU conveyor belt incl. cleats and corrugated edge Drive: Motor 1.1KW (adjustable), speed approx. 0.3m-0.5m/sec Connection 220/240V, 50Hz protection class IP54 Drive etc. ready for connection, motor control optional 6x adjustable machine feet for alignment Scalloped edge: 80x50mm flush with both sides 2-layer particularly transversely stable We always have various systems of this type in stock. The delivery time of an individual system is curr ...
Containerized Tank Washing and Waste Water Treatment Plant (WWTP) for ISO Tanks and Road Tankers. Complete turnkey system consisting of a tank washing unit and a waste water treatment and recycling plant. Tank Washing System: - Tank wash system installed in container - Designed for 5-8 ISO tanks/day and 3-4 road tankers/day - Double-sided GRP wash gantry with access stairs - 6 pump and water heater sets - Capacity: 12,000 l/h - Operating pressure: 100 bar - Water temperature up to 80°C - Hot water wash and cold water wash - Fresh water and recycled water operation - Dual detergent dosing system - 205 litre detergent storage - 2 ISO tank cleaning heads - 3 road tanker cleaning heads - High-pressure hot/cold cleaning lance - Stainless steel high-pressure pipework - Remote gantry-mounted control panel - Designed for top and bottom tank cleaning Waste Water Treatme ...
Zeiss CNC Coordinate Measuring Machine Prismo MP5 Year of manufacture: 8/1999 Last calibration 9/2023 Measuring range: X= 900 mm, Y= 1200 mm, Z= 700 mm Device features, equipment: Control C98 with control panel Sensors RDS with RST Pushbutton Changer Magazine 5-fold RST 5x probing system Dpp7Jl Pushbutton Accessories Measuring ball Calculator with monitor Software Calypso Basic 5.4 Loading system Other accessories Complete retrofit C99 and Calypso possible
Linear rail with folding cam Height-adjustable for mounting on hole punches
Cone gauges Morse Taper 2 Cone gauges Morse Taper 3 Cone gauges Morse taper 4 Cone gauges steep cone 30 Taper gauges steep cone 40 Test Mandrels Morse Taper 2 Test Mandrels Morse Taper 3 Test Mandrels Morse Taper 4 Test mandrels steep cone 30 Test Mandrels Steep Cone 40 Cone cleaner Morse taper 2 Cone cleaner Morse taper 3 Cone cleaner Morse taper 4 Cone cleaner steep cone 30 Cone cleaner steep cone 40
Keyence XM-C1000 Portable Coordinate Measuring Machine / Measuring System Manufacturer: Keyence Model No.: XM-C1000 Condition: Used, fully functional For sale is a used Keyence XM-C1000 measuring system for precise 3D coordinate measurement of components and assemblies. The system enables fast and reproducible measurements without time-consuming programming and is ideal for quality assurance, incoming goods inspection, first article inspection and production monitoring. The XM-C1000 impresses with its simple operation, high measurement accuracy and flexible application options. Measurements of distances, diameters, positions, angles and geometric tolerances can be efficiently carried out and documented. Technical features Portable Optical Coordinate Measuring System Precise 3D measurements Intuitive user interface Fast test sequences Automatic measurement protocols Id ...
height: 820 mm work height max.: ca. 2250 mm weight: 2,6 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Auction-ID: A1-48959-40
Including 1 Sharp hot air oven Auction-ID: A1-49790-1103
Technical details Manufacturer: SINAJET TECH Model: POPJET1811C TWO HEADS Type: Wide-format inkjet plotter / pattern plotter Serial number: L181CF05002 Power supply: AC 100–240 V Frequency: 50/60 Hz Maximum current: 2.33 A Configuration: - Dual print-head system - Wide-format printing platform - Roll-feed media handling system - Motorized paper transport - Take-up system - Integrated control panel - Floor-mounted industrial frame Printing width: Approx. 1800 mm Application: - Apparel pattern printing - Textile CAD output - Marker making - Upholstery pattern production - Leather cutting-room workflows - Full-scale template printing - CAD drawing and layout printing Construction: - Industrial steel frame - Continuous roll-fed operation - Computer-controlled printing system Condition: Used, untested Observed condition: - Frame appears structurally straight ...
Injection Unit Screw Diameter: Ø 50 Injection Volume: approx. 490 cm³ Injection Pressure: up to 1,800 bar Injection Rate: approx. 350 cm³/s Plasticizing Capacity: approx. 50 g/s (PS) Nozzle Contact Force: 65 kN Clamping Unit Clamping Force: 2,600 kN (260 t) Clamping System: ENGEL Victory tie-bar-less design Platen Size (H × V): approx. 1,000 × 950 mm Mould Opening Stroke: 600 mm Max. Daylight Opening: approx. 950 mm Min. Mould Height: 350 mm Ejector Stroke: 150 mm Ejector Force (fwd / back): 50 / 30 kN Drive & Control Drive Type: Hydraulic Hydraulic System Pressure: up to 160 bar Pump Motor Power: 22 kW Total Installed Power: approx. 30 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL CC300 touchscreen control Equipment / Features Clamping Concept: Tie-bar-less design for improved mould accessibility and com ...
Injection Unit Screw Diameter: Ø 65 Injection Volume: approx. 1,075 cm³ Injection Pressure: up to 1,750 bar Injection Rate: approx. 400 cm³/s Plasticizing Capacity: approx. 85 g/s (PS) Nozzle Contact Force: 110 kN Clamping Unit Clamping Force: 5,500 kN (550 t) Clamping System: ENGEL Duo two-platen design Platen Size (H × V): approx. 1,350 × 1,300 mm Mould Opening Stroke: 850 mm Max. Daylight Opening: approx. 1,450 mm Min. Mould Height: 400 mm Ejector Stroke: 220 mm Ejector Force (fwd / back): 95 / 65 kN Drive & Control Drive Type: Hydraulic (pre-ecodrive generation) Hydraulic System Pressure: up to 160 bar Pump Motor Power: 45 kW Total Installed Power: approx. 65 kW Power Supply: 400 V / 50 Hz / 3-phase Control System: ENGEL EC88 digital control panel Equipment / Features Clamping System: Robust two-platen design for hi ...
Including 1 Sharp hot air oven Auction-ID: A1-49818-1103
Lifting spindle drive Framo - Drive technology 3 units in stock Stroke 1,500 mm Adjustment force 4,000 N Lifting speed 5 mm/s -New- -Unit price- Original price today approx. € 6.300,00 net per piece
description: Modern, automatic high-performance filling lines place high demands on the smooth infeed and outfeed of the containers to be filled. The finely dosed application of aqueous lubricating solutions in exact concentrations according to requirements reduces the frictional resistance between the moving parts, reduces their wear and tear and thus prevents unnecessary production downtimes. Besides buying and selling of conveyors and machines our strength lies particularly in services and project planning, as for example in rebuilding and adapting of your installation as well as in overhaul and relocation of machines. You have a first idea or even a concrete plan? It does not matter how far your project is, we support you in every phase! Or do you want to sell or market your machine? We also buy machines or provide you with a marketing concept. Ask for your individua ...
length: 3 m weight max. in kg: max. 150 kg weight: ca. 9 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
carrying capacity: 1300 Battery Towing Tractor unused, only 1 working hour Electric powered, pedestrian controlled tow tractor for towing wheeled loads up to 1300 kg in weight Technical Details Drive Electric Tires Pneumatic Battery 24V/50Ah Service Weight 98 kg Service Brake Electric Motor 0,4 kW Drive Motor kW Driving Speed With / Without Load 4 / 4,5 km/h km/h Built-in Charger 24V5A The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Feeding Technology / Feeding System / Vibratory Conveyor / Sorting Device / Spiral Conveyor Vibrating Cup, Sorting Device / Screw Feeder with Vibratory Conveyor for Screwdriving TechnologyFeeding System DEPRAG Type: 0622-P/0,75-1SNr: 1183884 2011 - 2012The system was used for feeding electrical plug contact pins. Product dimensions: 4 mm, length 26 mmThe pins are stored in the material hopper, the feed belt conveys the pins into the spiral conveyor as required.
Mobile Articulated Measuring Arm Measuring Machine Gauge Manufacturer: Zett Mess Type: AMPG 2400 Precision Year of Make: 2010 Measuring Ø: 2,400 mm
Suitable for measuring all types of milling and drilling tools, profiles, punching tools, drive and cardan shafts, profile rollers, etc. Accessories: Measuring table adjustment with digital display, Screen diameter: 500 mm, Enlargement: 50 and 100 times, Swivel range of the upper table: +/- 2 mm, Connected load approx.: 230 V / 50 Hz, Dimensions W x D x H approx.: 1200 x 700 x 1800 mm, Weight approx.: 400 kg, colour: Light grey
1.800 litre, Stock number: T3640, Litre: 1.800, Material: Stainless steel AISI 304, In stock: Yes, Amount in stock: 5 pcs., Item: Tank, Lying: On 2 pcs. leg console, End bottoms: Dished, Tank cover: I the top, Ø 400 mm, CIP: Yes, Inner diameter: Ø 1000 mm, Dimensions: L 2550 x H 1380 mm, Other: Polished
SCHÄFER/ KLENS blasting technology. Dust-free sand blasting equipment for stonemasonry, Age 2005., Blasting head with brush seal, Push button on/off, Suction hose, Blasting hose, Dosing valve for blasting Hose, Automatic filling valve, Blasting media pressure container, 33 liter capacity, Dust removal hose, Connection for compressed air, Power connection, Pressure relief valve, Suction device, Air requirement max. 750 lts/ 4 bar, Power consumption up to 3000 watts (380V), Rolling cart with handle
Blum TC50 touch probe with SK50 tool holder Manufacturer: BLUM Type: TC50 Interface: SK50 Application: Stylus for workpiece measurement Condition: used Price without VAT Country of origin: Germany Pieces: 1
Renishaw OMP60 probe system with SK mount Manufacturer: Renishaw Model No.: OMP60 Mounting type: SK (probably SK40, please confirm if necessary) Application: Automatic touch probe for CNC machines Scope of delivery: – Probe OMP60 – SK holder with integrated radio module – Stylus (Ruby) – Assembly tool (hexagon socket) – Original Renishaw case - Quick Start Guide in Multiple Languages Price without VAT Condition: used, very good condition
Plasma Cutting Machine MB - Welding Technology Type Plasmaprof 50Identical to CEBORA ash. No. 244311 Year of construction approx. 1992Power 50 Amp. = 35 % ED 30 Amp. = 100 % EDEsetting range 2 stagesHose package length approx. 6 metersCompressed air connection 4.7 barMains connection 400 Volt, 50 Hz, 32 Amp. PlugSpace required L x W x H 500 x 350 x 700 mmWeight approx. 80 kgGood condition; used
Digital 3D edge scanner MarTest 802 EW Working Areas X, Y, Z -Axis: - 2 to 4 mm Dffernschrittwert_mm: 0.005
Measuring machine Wenzel Smart CMM 1000 Year of construction 2010 Travel: X axis: 1000 mm, Y axis: 450 mm, Z axis: 400 mm Good condition
From a current recycling we offer you a Holmer implement carrier + slurry technology + beet bunker Terra Variant 585 plus attachments. Year of manufacture: Holmer implement carrier + Zunhammer slurry technology 2019, beet basket 2024 First registration: / Condition: used Hours: approx. 8,459 Asking price: 295.000,00 Euro VHB Original price: 425.000,00 Euro Equipment / accessories / other information: Property will be converted to slurry at short notice Terra Variant 585 (BJ 2019), Slurry technology Zunhammer 21 m³ & Vogesang (BJ 2019), Overload bunker RB 35 (BJ 2024) Asset Manager: Klaudius Giolbas Phone: 0202 257273151 Mail: k.giolbasakf.de We will be happy to provide you with details upon request. Location: 24983 Handewitt The sale is without warranty Subject to prior sale
The machine comes from a warehouse liquidation. Unfortunately, no further technical information is available. It was not possible to check the function. The weight is approx. 2,500 kg.
2 pieces robust moment bag clamps / bag clamps for bag and big bag filling for safe and fast attachment of a bag ( up to 50 kg ) to a bag nozzle / filling tube, diameter 290 mm, outlet 150 mm Universal Application: Feed, Food, Building Materials, Agriculture · Easy one-handed operation thanks to lever mechanism · Hammered paint grey Bag nozzle diameter 290 mm, outlet 150 mm
Plant for shredding of frozen blocks consisting of:, Coarse pre-cutting - Blocks are fed directly from the pallet into the machine with a forklift, the pre-cut pieces are taken over by a Z-band and transported to Vogelsang - shredding. They are inspected for metal contamination by a LOMA metal detector., The shredded parts are conveyed via a Z- conveyor belt to the batching plant. It has a capacity of approx. 2,000 kg. The batching container rests on load cells. A pallet box conveyor system ensures that the pallet boxes are filled with a preset weight and transported further after filling., Further data, photos, and videos available on request., The machines can also be purchased individually.
Automatic small parts warehouse (AKL) with conveying technology for E3 - boxes (600x400x320mm), designed for 6 days per week, 2-shift operation,, Goods receipt: 60 - 200 containers per hour (intermittent),, Storage capacity: 14,000 containers - parking spaces,, Footprint: Length x Width x clear height: 72.00 x 52.00 x 13.80 m,, Description in the attached Word document.
Quail Trunk Refrigeration Cobox HLFHerder : Quail TrunkType : COBOX HLF 6080-5 / BHF-80-TCyear of construction: 2010COBOX HLF For shock freezing of dough pieces and for long-term storage of frozen dough pieces and semi-baked Temperature range: -5 Â C to -35 Â CDedetails see pictures
maximum number of results exceeded
please refine your search
1.000 € 
