new tech used for sale

200ton Downstroke Moulding Press Manuf.: R+S Technik Platens: 1500 mm deep x 2000 mm wide Daylight 1000 mm Press force 2000kN Tearing force 120kN Operating voltage 3x230/400V, AC, 50Hz Installed power 197kW Max. weight of tool 5000kg Max. pressure of hydraulic 250bar Length of stroke 1670mm Weight: 37000kg Year 2016

Factory liquidation mask production. Installation 2021, out of service since March 2022. The systems have already been dismantled and ready for delivery. Stationary industrial vacuum cleaner Power 2.2 KW Air flow rate 300 m/min Suction port 40/50 mm Weight 30 kg

General SKU274U478 MakeVib Tech GmbH LocationBarneveld CEcheck TypeSO 406/2020-UA Main Features MaterialStainless steel Length2350 mm Width400 mm Specified Features - Vibro feeder Vibro feedercheck Feeder diameter400mm Feeder length2350mm Closedcheck InletDia:250mm OutletDia: 175mm With vibro motorcheck With motor0,6kW,230/400Volt, 955rpm(EX) Without controlscheck MaterialStainless steel 1.4306 (304L) General No.1101002-01 Year of construction09-2010 Mounted on framecheck Floorspace2,55x1,15m Total height1,2m Weight540kg ATEX designedcheck Extra Specificationsthis vibrating feeder is equipped with CIP cleaningConsumer wastePowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeStarchOther chemicalRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesPaper & otherOther pharmaceuticsOrganicsSugarAnimal feedVibro feedersSolid pharmaceu ...

Offer 20244 Granulate dryers Technical data approx.: - Filling quantity approx. 250 L - Granulate feed via suction device - Heating capacity 10 kW - Total drive power 10.5 kW -Thermostat - Compressed air connection 6 - 8 bar - Mobile version - Space requirements W 850 x H 2350 x D 950 mm - Weight approx. 180 kg

Used AVE - Technologies UNIBLOCCO MLK EFS/ESL 12/12/1 filling machine. New: 2006. AVE-Technologies EFS electronic filling systems are based on high-precision technology, guaranteeing high accuracy and high efficiency at all stages of operation. EFS filling machines are suitable for non-carbonated products such as water, fruit juices and nectars, milk, spirits, oils and food sauces in plastic and glass bottles. The set includes a labelling machine and a cap lift.

An unused Technotrans temperature control unit is available. Connected load range: 8kW-9.5kW, heating capacity range: 7.5kW-9kW, cooling capacity: 23kW, circulating medium: water, max. operating temperature: 95°C, max. operating overpressure: 0bar, filling volume: 10l. Documentation available. On-site inspection is possible.

A semi-automatic 1-head pneumatic jar closing machine Lenssen Vul-En Sluittechniek is available. Closing capacity: 720jars/h, operating pressure: 6bar, machine dimensions X/Y/Z: approx. 500mm/500mm/800mm, weight: approx. 40kg. Documentation available. On-site inspection is possible.

A semi-automatic NC tube bending machine Tracto-Technik is available. Tube diameter: 48mm, max. tube length: 3000mm, max. material thickness: 4mm, max. bending angle: 180°, max. bending radius: 125mm, bending accuracy: +/-0.2°, bending speed: 20°/s. Machine dimensions X/Y/Z: approx. 3900mm/800mm/1250mm, weight: approx. 700kg, control system: Siemens Simatic. Documentation available. On-site inspection is possible.

This Quick Tech T8-Hybrid-YB Turning Milling machine was manufactured in the year 2021 in Taiwan. It is equipped with a Fanuc Series Oi - TF Plus control unit.

Wide belt sander DMC mod. TECHNOSAND TCK-1100 M3 - CE rules - Working width mm. 1100 - 1st unit roller 18.5 kw 90 sh diam. 250 mm. - 2nd unit roller 15 kw 70 sh diam. 250 mm. - 3rd unit roller 11 kw 40 sh diam. 330 mm. - N. 3 independent motors - Touchscreen display - Short pieces device - S/N SA/005623 - Year 2007

Size: 740 mm Equipments: software with Dongle PC with Screen

This 6-axis Quick-Tech i60 twin was manufactured in 2016, featuring a CNC turning center with B-axis and driven tools. It includes a main spindle bore of 60 mm, sub spindle bore of 42 mm, and a maximum turning length of 300 mm. The machine offers 4-axis simultaneous machining, full axis programming, and a Mitsubishi M70 control system. Consider the opportunity to buy this Quick-Tech i60 twin horizontal turning machine. Contact us for more information about this machine.

This QUICK-TECH Q5 Milling center was manufactured in 2018 in Taiwan. It is equipped with a Mitsubishi M80 control. This milling machine has a table size of 620 x 420 mm with a max. table load of 250 kg. The clamp type is BT30. The machine is still under power and can be inspected at any time. There are 4 units available of the same model and YOM at the same location.

General SKU329T1332 LocationBarneveld MakeAzbil Telstar Technologies TypeLyoAlfa 15-55 Main Features MaterialStainless steel Surface0.48 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface0,48 m² Plate sizesdia. 300 mm (not delivered) With cooling compressorcheck MakePfeiffer Vacuum TypeDUO 10M CapacityS(N₂): max. 12 m³/h Cooling mediumR-507a Motor0,45 kW 100-110/200-230 Volt MaterialStainless steel 1.4401 (316), Stainless steel 1.4404 General No.3393 Year of construction2016 With switchcheck Floorspace0,7x0,76 m Total height1,1 m Weight240 kg Extra information Ice condenser capacity: 22 kg Final condenser temperature: -55 °C Number of compressors: 1 Base unit weight: 190 kg Total power: 3,2 kW Powdered foodsGeneric medicinesFine chemicalsFreeze dryersBiotechnologyFeed additivesCosmeticsFood additivesSolid pharmaceuticsBiopharmaceutical ...

This EVO-tech EL-102 V2 was manufactured in 2021. A plastic 3D printer featuring a robust 400 VAC system, it operates efficiently within a temperature range of 5–35 °C and humidity levels of 20–85% RH. It adheres to safety with IP41 protection and CE marking. Consider the opportunity to buy this EVO-tech EL-102 V2 plastic 3D printer. Contact us for more information.

General SKU018X226 Year of constructionunknown LocationBarneveld Main Features MaterialStainless steel Number of1 heads Dosing1000 ml Specified Features - Piston filler Piston filler(1x) Dosing± 250/500/1000 Ml Number of pistons:1 Number of filling heads:1 Pneumatically operatedcheck With hopper(Capacity approx. 20 Ltr) Mounted on framecheck With switchcheck Floorspace1,2x0,6 M Total height2,0 M MaterialStainless steel General Weight100 KGPaints & coatingsOintmentsPiston fillersOther pharmaceuticsLubricants & oleoDairyOils & fatGemini TechniekIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > OintmentsPackaging machines > Piston fillersIndustries > Pharmaceutical > Other pharmaceuticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > DairyIndustries > Food & Feed > Oils & fatBrand > Gemini Techniek What you can expect from Foeth ...

General SKU434W1403 MakeTechnoglass / ETS de Dietrich LocationBarneveld TypeCE 8000 Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialGlass Volume8000 Ltr. Motor11 KW Specified Features - Glass-lined Reactor Reactorcheck Capacity9330 l., (8000 l.) Vessel sizesø 2200x3000 mm Dished bottomcheck Dished top sidecheck ManholeDN500 Top connectionscheck OutletDN150 With jacket(765 l.) Max. temperature-25/200 °C With propellor stirrercheck Motor11 kW 400 volt 1460 rpm (EX) Without motorcheck Speed mixing shaft30-190 rpm With jacketcheck Glass Reactors MaterialGlass - Enamel (3009) General No.3609 Year of construction1989 Mounted on legscheck Floorspace2,60 x 2,60 m Total height5,80 m Weight9500 kgGeneric medicinesOintmentsFine chemicalsOther chemicalBiotechnologyGlass-lined R ...

This Engel Duo 3550/550 Tech was manufactured in 1998. It features a clamping force of 5500 kN, a maximum injection volume of 1960 cm³, and a screw diameter of 80 mm. The machine dimensions are 8840 x 2520 x 2230 mm, and it weighs 20,000 kg. If you are looking to get high-quality injection moulding capabilities, consider the Engel Duo 3550/550 Tech machine we have for sale. Contact us for more information.

General SKUR1172 MakeTechnoglass (It) LocationBarneveld Type1244 Ltr Pressure Working pressure3.2 Bar Vacuum possiblecheck Main Features MaterialGlass Volume1244 Ltr. Pressure3.2 Bar Vacuumcheck Specified Features - Pressure vessel Capacity1244 Ltr (nett. 1000 Ltr) Vessel sizesdia.1000mm x1810mm Dished topcheck Dished bottomcheck With covercheck Top connections2x DN200, 2x DN100, 3x DN80 OutletDN80 Max. temperature200 degr.C. With propellor stirrercheck Motor1,1 kW 220/380 Volt (Ex) Pressure vessels With propellor stirrercheck Motorcheck Specified Features - Pressure vessel MaterialGlass - Enamel General No.3096 Year of construction1985 Floorspace1,4x1,4 M Total height2,9 M Weight1200 Kg ATEX designedcheckPressure vesselsGeneric medicinesFine chemicalsOther chemicalRubberBiotechnologyPlastic & polymersCatalysts & fillersOther pharmaceuticsCosmeticsAnim ...

This Engel VICTORY 1350/260 tech was manufactured in 2012. It features a clamping force of 260 tons, a maximum injection volume of 735 cm³, and a screw diameter of 60 mm. The machine dimensions are 5,861 × 1,923 × 2,300 mm, and it weighs 19,400 kg. Currently in production with excellent condition and 73,164 operating hours. Contact us for more information about this machine.

General SKU254S205 LocationBarneveld CEcheck MakeSGL Carbon Technics (FR) Pressure Working pressure10 Bar Main Features MaterialDiabon Volume30000 Ltr. Motor7.5 KW Specified Features - Centrifugal Pump Pumpcheck Number of pumps:1 Capacity30 m3/h With motor7,5 kW 400/690 Volt InletDN65 OutletDN40 Centrifugal Pumps MaterialGraphite Diabon General TypeFRWP NG 65-40-200 Mach.No.901466 Year of construction2012 Floorspace1,4x0,6 M Total height0,9 M Weight320 KgPaints & coatingsCentrifugal PumpsFine chemicalsOther chemicalRubberBiotechnologyAgrochemicalsPlastic & polymersCatalysts & fillersSolventsDetergent & surf.CosmeticsLubricants & oleoDairyBeveragesDyes & pigmentsAPIMinerals & inorganicOils & fatSGL TechnikIndustries > Chemical > Paints & coatingsPumps > Centrifugal PumpsIndustries > Chemical > Fine chemicalsIndustries > Chemical > Other chemicalIndustries > Chem ...

Key data: 42 mm

Equipped with Iemca Boss 545 barfeed and Mitsubishi M700 Control, the lathe has always worked with oil, in regular working order (just replaced bearings and ball screws of the X1/Z1 axes and 2 drives)

workpiece diameter: - mm grinding depth: - mm clamping length: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

ID3738 Witte Bohrtechnik VSB500-200 year/Baujahr 1991 Trailer-mounted well drilling rig, Hatz engine, 2 hydraulic pumps, direct rotary head, with flushing pump (auxiliary pump) – with Hatz engine, previously drilled to a depth of 60 m – 160/170 mm Trailer well drill, Hatz engine, 2 hydr. Pumps, direct rotary head, with mud pump (auxiliary pump) - with Hatz motor, drilled with it so far: 60 m depth - 160/170 mm

Flour silo ALU2 pieces made of ALUMINUMProduct descriptionManufacturer: AT HefeleIdeal for cellars height 200cmEach piece 4 clay pieces Silo per mass Diameter : 240cm Height : 190cmDetails see pictures.

FOR SALE steam turbine year 1997

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK6 2 pieces -Type: PTPk-6/5 / MK6/5 -Shipping/Price: complete -Transport dimensions: 127/64/H148 mm -Weight: 4.0 kg

tube diameter: 6 - 42 mm wall strength: 3 mm bending radius min.: 180 mm bending radius max.: 5 mm total power requirement: 1,5 kW weight of the machine ca.: 0,8 t dimensions of the machine ca.: m Equipment: Saw unit Notching unit Deburring unit for internal and external edges Flaring unit / flaring function (necking / expanding) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Working range pipe Ø 6 to 42 mm - Bending, deburring, pre-assembly, sawing - Pipe extension length approx. 1,500 mm - Electro-hydraulic drive 1.5 kW - Weight approx. 700 kg - Incl. extensive tools - See photos

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve -Adapter sleeve: Morse taper sleeve MK5 2 pieces -Type: MK5/4 -Shipping/Price: complete -Transport dimensions: 345/100/H50 mm -Weight: 7 kg

Morse taper sleeve, tool holder, Morse taper, Morse cone, taper sleeve, adapter, extension sleeve, reducing sleeve, cone sleeve, adapter sleeve, spindle sleeve, extension sleeve -Morse taper sleeve: Morse taper extension MK2 2 pieces -Type: MK2/2 -Total length: 400 / 475 mm -Shipping/Price: complete -Transport dimensions: 475/44/H22 mm -Weight: 2 kg

Manufacturer: Technolegno, Year: 1989, Program: SPS, Work piece width min-max mm: 60, Min.-max. workpiece height in mm: 10-60, Work piece length min-max mm: 150, Sanding hight mm: 40/60, Schleifaggregate links : 3 + 1+ 2, Surface sanding units: 4, Profile sanding units: 1, Sanding unit discs: Kopierschleifaggragt, Monting of the machine: 4 Langband 1 Bürste 1 Kopierschleiffen, Unit 1 tiltable: yes, Unit 1 Kw: 0,75, Unit 2 slewable: yes, Unit 2 Kw: 0,75, Unit 3 slewable: yes, Unit 3 Kw: 0,75, Unit 4 slewable: yes, Unit 4 Kw: 0,75, Unit 5 slewable: no, Number of frequency controlt belts: über Getrieb, Sanding belt speeds m/min: 3-18 m/sec, Intermediate sanding of lacquer: yes, Shoes electr. controlled: yes, Constant table hight: yes, Brushing unit: 1, Wight approx. kg: 4000, FREE TEXT: Vorsch von 3-18 Meter, Year :1989

General SKU440W1452 MakeAgilent Technologies LocationBarneveld CEcheck Type1100 series Specified Features - HPLC Capacity100x 2 ml vials in 1 tray, 40x 2 ml vials in 1/2 tray, 15x6 ml General No.DE43628255 Year of construction2005 Floor space1,00x0,60 m Total height0,80 m Weight100 kg Extra SpecificationsHPLC with autosampler.UV-visible detectors, pumping system, fluorescence detector, LC/MSD unit, refractive index detector, GPC/SEC system, Micro plate sampler, 220, Chem station&:nbsp:all product nr:s:G1314AG1312AG1379AG1316AG1367AG1330BPaints & coatingsPowdered foodsGeneric medicinesHPLCOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalRubberBiotechnologyAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesSolventsDetergent & surf.Other pharmaceuticsCosmeticsFood additivesSugarLubricants & oleoDairyAnimal feedOther feedConfectionerySolid pharm ...

Pharma Technology PTGV 1200 CE N ECE capsule deduster/polisher with Ceia THS/PH21N metal detector, empty capsule eliminator to remove any empty, broken or opened capsules and venturi vacuum transport, suitable for capsule sizes 000 / 00E / 00 / 0E / 0 / 1 / 2 / 3 / 4 / 5, capacity from 220.000 capsules/h (size 00) up to 500.000 capsules/h (size 4), height product inlet 864 +/- 10 mm, height product outlet 1023 +/- 20 mm, machine floor space approx. 1289 x 615 mm (W+D), machine height approx. 1788 mm, electrics 230 V AC – 50/60 Hz

Inv. Num. : 9058 Type: SPV 40 CNC Producer: CZ. TECH Created: 2008 Parameters: Control system: SIEMENS Table diameter: 533 mm Feed length X-axis: 550 mm Feed length Z-axis: 850 mm Max. turning diameter: 850 mm Max. workpiece height: 800 mm Max. workpiece weight: 800 kg Weight: 12500 kg

BERTHOLD TECHNOLOGIES MITHRAS LB 940 Multimode Microplate Reader Plate reader for luminescence and fluorescence Number: 38099-33 Untested Equipment Without a computer Without software

Capacity for the LTM120 is 4600 to 4800 pieces / hour. PIC: SABRINA (0177418071) F30

Auto Glove Sampling Machine NX Series PLC Factory : F40

Silo system with 4 containers HB-TECHNIK - Capacity of a total of 16 tons of flour - 4 aluminium silos - Incl. scale and dosing unit - Condition: Good, ready to use - already dismantled - Transport costs and assembly on request

Description Technotrans TBP 300-36-12 paint pumps with signalling panel 4 x 300 kg from 2010 Ratio 16:1 Compressed air 7.5 bar required

Description This sensational, versatile tool with a diameter of 35 mm solves your cutting and micro-perforation problems in one fell swoop. Only one tool for micro-perforation, cut-off, cut-out, edge trimming and scribing.

Description Techno-Grafica Diamand TPP 1550 HS Printing Plate Developing Machine with Two Brush Rollers for Kodak Trillian SP from 2016 with Various Replacement Brushes and Rollers

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.