We use cookies to optimize our website for you and to be able to continuously improve it. By continuing to browse the site you are agreeing to our use of cookies.
Disagree
119,320 used machines on RESALE, but how to find them? Machine Search
maximum number of results exceeded > 1000
please refine your search
new
Key data: 220 °C, 2000 mm
PULVERBESCHICHTUNGSOFEN Verwendungszweck : Pulverbeschichtung Maximale Temperatur : 220ºC NUTZBARE INNENABMESSUNGEN Länge : 2.500mm Breite : 1.200mm Höhe : 1.800mm Material der Außenfläche : 1mm Kohlenstoffstahlblech, außen pulverbeschichtet Material der Innenfläche : 1mm verzinktes Stahlblech, nicht beschichtet Dicke der Isolierung : 150 mm Isolierung : Boden - 50 mm Steinwolle (50 kg/m³) Seiten- und Deckplatten - 150 mm Steinwolle (50 kg/m³) Wärmeübertragung : Konvektion, durch geschlossenen Luftkreislauf Heizungsart : Indirekte Heizung mit Wärmetauscher Temperaturregelung : Ein/Aus, 0-400ºC Digitaler Thermostat, Fe-Const (J-Typ) Thermokupplung Umgebungstemperatur : +10ºC (während des Betriebs) Gleichmäßigkeit des Ofens: ±2,5ºC (5ºC insgesamt) Regelgenauigkeit: ±1ºC Aufheizzeit : 25-30 min (leerer Ofen) Energiebedarf des Ofens : 30.000 kc ...
used
Automatic gas-atmosphere exchange system and ultra-high-vacuum-high-temperature furnace for thin tubes for molecular cleaning at 12 stations for thin tubes from 2mm diameter to 120cm in length and conditioning or replacing the gas atmosphere inside the tubes in one pass
used
Gas stove with electric ovenMKN type 2163403-02 with 4 burners, 2 large, 2 slightly smaller. Is used and functional. Oven inside Dimensions: W.: 53 cm, D.: 50 cmOutside dimensions W.: 80 cm, D.: 70 cm, H.: 88 cm
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Working space: Width: 600 mm Height: 650 mm depth: 800 mm External dimensions: Length: 1200 mm Width: 900 mm Height: 2000 mm
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm
used
(1) Gas (2) Fuel (3) Electric: 0 Temperature maximum: 0 C° Capacity (kg): 0 kg Technical data Max. temperature: 1000 °C Execution: hardening Working space: Width: 100 mm Height: 140 mm depth: 300 mm External dimensions: Length: 1000 mm Width: 850 mm Height: 1400 mm
used
Machine type MIG/MAG welding system Fabrikat Castolin Eutectic Type Derby 230 Connection voltage 3 x 400 Volt Setting range 25 – 230 amps Duty cycle 35 % ED at 230 Ampere 60% ED at 154 amps 100% ED at 120 amps Current setting 8 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 2-roller drive Fuse 16 amps Dimensions L x W x H 800 x 440 x 790 mm Weight 84 kg Age approx. 20 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SB 154 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 ...
used
Used exhaust gas heat exchanger Aprovis, functional; Price net EXW
used
Recon Part number: 1230 0571 Attention: We also have various other RECON parts of different manufacturers / types available. We will be happy to send you our current stock list.
used
Specifications: - Welding current 600 A 45% ED 520 A 60% ED - 400 A 100% ED - Welding current adjustable - in 2 coarse stages and 10 fine steps from 50 A to 600 A - Digital Volt + Ampere display - 4 roller wire feed infinitely adjustable - Control M 100 for : - Two-stroke – four-stroke regulation - Interval welding - Spot welding - Stepless creep speed and wire backburn time - Intermediate package to the separate wire feed case approx. 4 lfm - Hose package approx. 4 lfm - Ground cable - Pressure reducer - Connection 400 V - Space requirement approx. W 650 x H 850 / 1250 x D 1100 mm - Weight approx. 280 kg
used
Control: P 2000 Technical data Max. temperature: 250 °C Execution: drying Working space: Width: 600 mm Height: 400 mm depth: 600 mm Power of the heating: 18 kW Ampere: 25 A Voltage 50 Hz 3x: 400 Volt Machine´s weight about: 250 kg External dimensions: Length: 800 mm Width: 800 mm Height: 1500 mm Various accessories: Ventilating / pulsated air
used
Technical data Max. temperature: 500 °C
used
Technical data Max. temperature: 950 °C Working space: Width: 100 mm Height: 100 mm depth: 300 mm Total installed power: 3 kW Voltage 50 Hz 3x: 380 Volt Machine´s weight about: 150 kg External dimensions: Length: 1000 mm Width: 700 mm Height: 1100 mm Various accessories: Protective furnace gas device
used
- Gas mixing valve MWM 12301147 - Suitable for several motors - Please note! Price per piece! - 12301147 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new project. By constantly adapting and integrating ...
used
- Mixing pipe mixture line MWM 12301281 - References: 12300476 ; 12300650 - Suitable for several motors - Please note! Price per piece! - 12301281 The Onets Group, including KompoTec in Cologne, is available as an experienced partner for the overhaul of gas engines. Our extensive range of services ranges from the basic refurbishment of stationary gas engines and their components to repairs in line with current value. In addition, we offer rapid provision of replacement engines as well as the production of individual and small series of new units. We support service providers, plant manufacturers and operators in the field of combined heat and power plants (CHP) and combined heat and power (CHP) in a partnership-based, technically convincing and sustainable manner. Our extensive experience in engine repair, resulting from decades of serial production, flows into every new proje ...
used
Machine type MIG/MAG welding system MerkLE brand Type M 254 K Connection voltage 3 x 400 Volt Setting range 25 – 250 amps Duty cycle 60 % ED at 250 Ampere 100% ED at 200 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 955 x 460 x 780 mm Weight 110 kg Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 307 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 pair of welder gloves with cuff 1 piece spare parts box kpl. Equipped 1 can of non-stick spray ME 4000 6 months warranty! 1 piec ...
used
Machine Type Electrode Inverter Welding Rectifier with bi-power setup Merkle brand Type MobiARC 284 cel Plant No. 106.539 Connection voltage 230/400 volts Setting range 20 – 280 amps Duty cycle 35 % ED at 280 Ampere 60% ED at 240 amps 100% ED at 210 amps Current adjustment infinitely variable weldable material thickness 7 mm Cooling inverter by built-in fan Special accessories Bi-Power setup Version portable mounting system Fuse 16 amps Dimensions L x W x H 485 x 200 x 435 mm Weight 17 kg Age 6 years Condition workshop tested, good, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece electrode cable 1 piece ground cable 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 110 mm 10 DIN 1 pair of welder gloves with cuff 1 piece of ...
used
TPL69-A30 TURBOCHARGERS FOR SALE
used
ABB TPS61-F33 EXHAUST GAS TURBOCHARGERS FOR SALE
used
Gas type : biogas Power 1250 kw Speed 1500 rpm with container
used
Cutting length 8,000 Cutting width 2,500 Generator HYPERTHERM HPR 130 HD 130 Amp HYPERTHERM generator mod. HTR300XD SIEMENS numerical control Bevel head Oxyfuel cutting head
used
TO WHOM IT MAY CONCERN; WE VE GENUINE 3 PCS MAN NR 34 / S 114. COMPLETE EXHAUST GAS TURBOCHARGER WITH SILENCER AT AT OUR STOCK. IT IS OVERHAULED & TESTED ON TRIAL ENGINE OPERATION . PLS FIND SPECT AT BELOW. TYPE NR34 / S 114 SERIAL NO SMM0965 t max . 650 C n max 26300 1/min YOB 2012 -09 . MADE IN MAN ENTPACO IF YOU VE ANY FURTHER QUESTIONS PLS DO NOT HESITATE TO CONTACT WITH US . Capt. Ayhan Ugurluba BEST REGARDS; Aliaga marine services E mail: info/aliagamarine.com PHN/fax: +90 232 618 03 90 Mobile: + 905556084850 aliagamarine.com TURKEY
new
Machine type MIG/MAG inverter welding system Böhler brand Type Uranos 2000 SMC Connection voltage 1 x 230 Volt Setting range 5 – 200 amps Duty cycle 35 % ED at 200 amps 60% ED at 160 amps 100% ED at 130 amps Current adjustment infinitely variable Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Wire feed gearbox 2-roller gearbox Fuse 16 amps Dimensions L x W x H 500 x 210 x 400 mm Special accessories TIG DC welding without HF E-welding, MIG soldering Weight 13 kg Age 6 months Condition workshop tested, as new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-200 coil, 5 kg 1 can of non-stick spray 1 piece ...
used
Agilent 5975C XL inert MSD with Agilent GC 6890 N GC Agilent 6890 N, Injector Split/Splitless, MSD 5975 C inert XL with EI,Turbopump,Fastscan Edwards Backing Vacuum Pump 1.5 Agilent Productivity Chemstation E02.02 on PC/Win 10 complete with all cables, Option: Agilent Liquid Sampler, Sampler/ CTC or Gerstel MPS 2) The system is ready for installation and ready for operation current service Installation at extra charge on request
used
Agilent 5973 N inert MSD with GC Agilent 6890 N Network Agilent 5973 inert MSD with EI and turbomolecular pump enhanced BOC Edwards Turbopump Agilent GC 6890 Network with Split/Splitless Injector/EPC Edwards Vacuum Pump 1.5 MSD Productivity Chemstation E02.02 on PC/Win 10 NIST on request Option: Agilent Liquid Sampler, CTC or Gerstel MPS2 Sampler currently maintained/with warranty Installation on request
used
One complete engine and some spare parts for Jenbacher J620
used
CHP with generator Stamford, electrical output 190 kWel., customer property, variant as building integration, without exhaust gas heat exchanger
used
Machine type MIG/MAG welding system MerkLE brand Type M 210 K Connection voltage 230/400 volts Setting range 25 – 210 amps Duty cycle 15 % ED at 210 Ampere 60% ED at 80 amps Current adjustment infinitely variable Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive DV 25 Fuse 16 amps Dimensions L x W x H 855 x 390 x 585 mm Weight 75 kg Special accessories point and interval device Adapter for 230/400 V Age approx. 25 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch SBT 157 G, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white ...
used
Machine type MIG/MAG welding system Eurotronic brand Type MAG 3000 EC Connection voltage 3 x 400 Volt Setting range 30 – 300 amps Duty cycle 35 % ED at 300 Ampere 60% ED at 230 amps 100% ED at 190 amps Current setting 12 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed 4-roller drive Fuse 16 amps Dimensions L x W x H 860 x 490 x 650 mm Weight 78 kg Age approx. 5 years Condition workshop tested, very good, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece welding torch 3 mtr. long 1 piece ground cable 1 piece pressure reducer argon with 2 pressure gauges 1 roll of welding wire D-300 coil, 5 kg 1 can of non-stick spray 1 piece spare parts box, kpl. Equipped 1 pair of welding gloves 1 piece instruction manual ...
new
Machine type TIG inverter welding system gas-cooled DC and AC system Merkle brand Type LiteTIG 190 AC/DC Connection voltage 1 x 230 Volt Setting range 5 – 190 amps Duty cycle 25 % ED at 190 Ampere 60% ED at 140 amps 100% ED at 115 amps Current adjustment infinitely variable weldable material thickness 5 mm Cooling inverter by built-in fan Cooling burner gas-cooled Version portable mounting system Fuse 16 amps Dimensions L x W x H 410 x 150 x 240 mm Weight 7.4 kg Age 6 months Condition workshop tested, as new, incl. UVV test protocol Scope of delivery welding system with the following accessories: 1 piece TIG burner 4 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 pair of TIG gloves 1 piece spare parts box kpl. Equipped 24 months warranty 1 piece instruction manual List factory price ex ...
used
Machine type MIG/MAG welding system equipped for steel wire in 1.0 mm Rehm brand Type RD 250 Connection voltage 3 x 400 Volt Setting range 35 – 250 amps Duty cycle 40 % ED at 250 Ampere 60% ED at 210 amps 100% ED at 170 amps Current setting 10 switching stages Cooling transformer by built-in fan Cooling burner gas-cooled Version of mobile compact system Wire feed gearbox 4-roller drive Fuse 16 amps Dimensions L x W x H 900 x 465 x 855 mm Weight 81 kg Age approx. 15 years Condition workshop tested, good incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece welding torch, 3 mtr. long 1 piece ground cable 1 piece pressure reducer with 2 pressure gauges 1 roll welding wire D 300, 5 kg 1 piece hand shield 1 piece attachment glass 90 x 110 mm white 1 piece of protective glass 90 x 11 ...
used
MWM TCG 2020 V 12 (ready to install) MN: 2204405 Circumference: - Crankcase incl. new bearing - Crankshaft (Std-Maß) incl. new bearing - Camshaft (12301190 / 12301191) incl. new bearing - Wheel operation incl. wheel box lid - Flywheel housing - Oil pump with oil suction pipe - Oil pan - Pestle (12453142) - Oil pressure valve On request, the scope can be extended (e.g. pistons, liners, cylinder heads, etc.) The offered part motor can also be used as TBG 620. The engine is not sold as a replacement engine. Measurement protocols are included. Please contact us for a written quote.
used
For sale a Dresser and Wayne CNG natural gas tap in good condition.
used
For sale a GreenField CNG natural gas tap in good condition.
used
Available in stock 2 x Used RMG Solenoid Gas Valves DN65 PN16, model 01-EVA 25 NH-4. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 1 x Gas Filter DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. VDC: 24 Power: 70 W Maximum Inlet Pressure: 0.1 bar Environment Temperature: -20ºC to +60ºC
used
Available in stock 1 x Used Bryan Donkin RMG Gas Pressure Regulator RMG-BD226 (FIG 226 ZSO-ECL). Designed primarily for control of fuel feeds to industrial and commercial burners, heater units, boilers and other items of equipment where an accurate, safe and reliable controlled pressure is required. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Outlet Pressure Range: -3 mbar to 3 mbar Maximum Inlet Pressure: 0.1 bar DN 65 PN 16
used
Available in stock 1 x Used Madas Gas Filter DN100 PN16. We also have other elements of the gas train available, namely: 1 x Ball Valve DN65 PN16 with pressure switch 2 x Solenoid Valves DN65 PN16 1 x Gas Pressure Regulator DN65 PN16 The equipment is used but in good working conditions. Environment Temperature: -15ºC to +70ºC Maximum Working Pressure: 2 bar
used
Available in stock 1 x Used AVK Flanged Gate Valve DN150 PN16. The equipment is used but in good working conditions. Temperature Range: -20ºc to +60ºC
used
Available in stock 1 x Used Bohmer Kugerlhahne Gas Ball Valve type FSK V 016.065 with Filter and Dungs Differential Pressure Switch GW 50 A4. We also have other elements of the gas train available, namely: 1 x Gas Pressure Regulator DN65 PN16 2 x Solenoid Gas Valves DN65 PN16 1 x Gas Filter DN65 PN16 The equipment is used but in good working conditions. Pressure Switch Maximum Operating Pressure: 500 mBar DN 65 PN 16
used
Available in stock 3 x Used Capstone Gas Pressure Regulator. Most commonly used for Microturbines C60. The unit is used but in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request. Max Inlet: 250 PSI
used
Available in stock 4 x Used Capstone Gas Fuel Manifolds. Most commonly used for Microturbines C30. All of the manifolds are complete with premix solenoid (P/N 507033-001). The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Max. operating temperature: 1600°C, including control cabinet, feeder and a defective glove box.
used
Available in stock 6 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C30. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Available in stock 9 x Used Capstone Gas Fuel Injector. Most commonly used for Microturbines C60. The units are used but are in good working conditions. Note: We have several Capstone parts in our stock to sell. If you are looking for something in particular, please contact us and we will see if we have anything to fulfill your request.
used
Circular cut diameter: 40-1000mm, max. cutting depth: 40mm, machine was scarcely used.
used
Nominal heating power: 80kW, length: 710mm, width: 1805mm, height: 1072mm.
used
There are two identical Viessmann Paromat-ER-ND available, nominal oil/gas output: 460kW, max. rated power input: 1000W, were maintained regularly.
used
There are two identical burners available, power: 350-2800kW, connection pressure: 15-500mbar, connected load: 9.23kW.
used
Fuel: natural gas, power: 300-2000kW, connection pressure: 15-500mbar, electric power: 4.32kW, operational hours counter: 38,723h, with documentation, without control cabinet.
used
Nominal heating output: 22.5-90kW, weight: 175kg, the machine was never used.