new diesel engine used for sale

1 -NO EXCHANGE cylinder head (overhauled) type 3 Jenbacher. cod. 9016986 Already overhauled and ready to use 2 -reUp exchange cylinder head (overhauled) type 3 Jenbacher. Jenbacher cod. 9016986 In this case you will have to return the used cylinder head to us. = 700 € CAD. EMAIL: administration@punto4srl

Engine type: Petrol, V-shaped, 8-cylinder. Power: Usually around 150 horsepower. Application: Used on ZIL-130 and ZIL-131 trucks. There are also other engines from tractors and trucks of Soviet production

There are also other engines from tractors and trucks of Soviet production

We offer new parts for sale for Yanmar Motor 3TNV88F (electronic regulator): All prices per piece in Euro plus freight+plus tax available from stock 1xECU unit NEW 129017-75040 net 750,- 1xCrankshaft NEW 129008-21000 net 750,- 1xOil pump NEW 129001-32002 net 250,- 1x Exhaust muffler with manifold net 300,- Many more new parts available on request at MIW GmbH Engine Repair Plant Nord-West-Ring 8 D-27404 Zeven-Germany Phone:0049(0) 4281-950583 Mail:infomiw-zeven.de

turning diameter over bed: 430 mm turning diameter over slide rest: 230 mm turning length: 1000 mm centre height: 215 mm centre distance: 1000 mm spindle bore: 56 mm spindle turning speed range: 19 - 2000 U/min total power requirement: 7,5 kW weight of the machine ca.: 1,9 t dimensions of machine L x W x H: 2,78 x 1,25 x 1,40 m Accessories: 3-jaw chuck 250 mmø, 4-pos. tool post, solid steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Tip height: 125 mm Center width: 800 mm Gr. turning Ø over bed/over carriage guide: 280/245 mm Spindle holder, thread according to DIN 800 Spindle bore: 24 mm Spindle speeds infinitely adjustable: 26 - 2000 rpm 36 longitudinal feeds: 0.019 - 0.528 mm Metric thread pitches: 0.25 - 6 mm 44 Inch Thread: 4 - 112 Gg/" electr. Connection: 380 V, 0.7/1.4 kW Space requirements: Weight approx.: 500 kg

Tip height: 150 mm Center width: 760 mm Swivel Ø over bed/support slide: 300/165 mm Spindle bore: 32 mm Spindle holder, short taper according to DIN 55027: Gr. 5 Tailstock quill taper: MK 3 12 spindle speeds: 85 - 2000 rpm 48 feeds: 0.006 - 1.77 mm 48 metric thread pitches: 0.1 - 28 mm 58 Inch Thread: 75 - 2.5 Gg/" 19 module threads: 0.1 - 1.75 module 19 Diametrical Pitch Thread: 70 - 4 DP electr. Drive: 220/380 V, 1400 rpm, 2.2 kW Weight: 800 kg Space requirement: 1800 x 770 x 1300 mm

: 0330 mm : 210 mm : 0635 mm : 167 mm : 40 mm : 2,2 kW spindle turning speed - stepless: 30-3000 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

For Sale: Jenbacher J620 GS-E12 – year 2013 Power output: 4277 kVA The unit was fully overhauled at 50,000 operating hours and has since run for approximately 36,000 hours. Included equipment: Control panels Transform Gas line Dry cooler Complete installation in good operational condition. Loaded now in France

Guiding and pulling spindle lathe OPTIMUM "Optiturn 4210 V" With 3 axis digital display Year of Make: 2015 Spindle bore: 54 mm Center width: 1000 mm Center height: 200 mm Speed range: 30 – 3000 rpm Stepless speed with display With the following accessories: Multifix Tool Holder Coolant Setup Three-jaw chuck 0 200 mm Four-jaw chuck 0 250 mm Collet chuck complete with collets up to 0 32 mm Feed protection Chip protection with lighting Fixed Lynette 0 approx. 150 mm Moving Lynette 0 approx. 100 mm 4 Height Adjustable Machine Shoes 1 pc. Rotating centering tip Operating instructions

Motor bracket, electric motor bracket, motor bracket, electric motor bracket, motor bracket, motor bracket, plummer block housing, plummer block housings, bearing block -Length: 400 mm -Width: 367 mm -Height 90 mm -Support arms: adjustable - Dimensions: see photos -Quantity: 3 motor mounts available -Price per piece -Weight: 16.5 kg

Electromechanical actuator for valves, valve drive, actuator, servomotor, air damper actuator, air damper actuator, gas pressure regulator, electro-hydraulic drive, servo motor, motor valve -Manufacturer: Dungs, engine valve unused OVP -Type: DMK 507 diam. 15 Item No. 222620 -p max.: 500 mbar -Number: 3x valve available -Price: per piece -Dimension box: 120/90/H55 mm -Weight: 0.4 kg/piece

Mobile motor jack crane, mobile pillar jib cranes, mobile pillar jib crane, assembly cranes, assembly cranes, workshop cranes, workshop cranes, pillar jib cranes, indoor cranes, workplace cranes -Transportable engine jack -incl.: manual trolley -with: cable -Load capacity: kg -Projection: 2,000 mm -Total height: max. 2,850 mm -Number: 1x available -Price: per piece -Transport dimensions: 1640/1515/H1585 mm -Own weight: 190 kg

Petrol engine, hydrant key, hydrant wrench, underground hydrant key -mobile transmission: with gasoline engine -Petrol engine Manufacturer: Honda Type: GX -was used as: hydrant key -Gearbox speed: 1-30 rpm -Features: Digital display, revolution counter, forward/reverse rotation -Wavelength: 520 mm -Square drive: 40 x 40 mm -Dimensions: 1400/800/H1160 mm -Weight: 132 kg

Motor control, controller, converter, stepper drive, stepper motor control, frequency converter, motor controller, servo drive controller -Manufacturer: Festo, Motor Controller -Type: CMMS-AS-C4--3A G2 572986 -Number: 6 controllers available -Price: per piece -Dimensions: 310/60/H180 mm -Weight: 1.4 kg/pc.

Motor clamping rails, motor clamping rails, motor clamping system, for electric motor, gear motor -Motor tensioning rail: -Groove width: 14 mm, length 360 mm -Hole spacing: 460 mm / Ø 16 mm -Number: 4x tension rail available -Price: per piece, minimum order 2 pieces -Dimensions: 505/55/H65 mm -Weight 3.0 kg/piece

Speed control unit, speed controller, controller, motor controller, motor control, motor control controller, motor controller Manufacturer: Ott, Motor control motor controller -Type: K10024-02 -Motor control: M-BL-10-24 -Number: 2 controllers available Price: per piece -Voltage: 15VDC to 30VDC -Dimensions: 75/45/H105 mm -Weight: 0.2 kg/pc.

turning diameter over bed: 280 mm turning diameter over slide rest: 170 mm turning length: 600 mm weight of the machine ca.: 400 kg spindle passage: 26 mm speeds: 55-2000 U/min total power requirement: 1,4 kW dimensions of the machine ca.: 1,5 x 0,8x 1,3 m Including EMCO SOD grinding support Including EMCO 4-jaw chuck Including machine feet Including change gears The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 400 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: 570 mm turning speeds: 45 - 1800 U/min centre height: 210 mm spindle bore: 52 mm tailstock quill taper MT: 4 MK connected load frequency: 400 V total power requirement: 3,5 kW weight of the machine ca.: 1,5 t dimensions of the machine ca.: 2,6 x 1,1 x 1,7 m Professional industrial machine digital display 3-jaw chuck 200 mm. 4-jaw chuck 200 mm. Faceplate 280mm Bezel fixed Bezel rotating Multifix steel holder. Machine light Foot brake removable chip tray, chip protection wall Hardened and ground bed rails Complete coolant system Feed protection Machine feet Machine tool The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 297 mm turning diameter over bed slide: 160 turning length: 500 mm short taper holder: Größe 5 spindle bore: 36 mm spindle turning speed range: 30-3550 U/min number of speeds: 18 quill adjustment: 90 mm tailstock quill taper MT: 3 cross adjustment: +15 tailstock adjustment - manual: 500 mm total power requirement: kW weight of the machine ca.: 610 kg dimensions of the machine ca.: 1,4 x 0,7 x 1,2 m wedge bar chuck Forkardt: Ø 160 mm Accessories: Forkardt V-block chuck, Ø 160 mm Collet chuck, Collets, Steel Multifix system, size A with 3 quick-change inserts Integrated center point Chip guard The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Turning length/ centre width 4m, Spindle inner diameter, Face Plate D 1000 m, Center height over support 360 mm, 2 Risings with roller jaw guide 1980 Retrofitted, Main spindle speed 215 - 355 rpm. Operations manual with circuit diagram, chip protection, Reversible steel holders, Supports have currently been overhauled, electric lock box, Weight approx. 15 tons, Guided tour possible, including attempted filming.

1x Engine D13B-N MH (FE), Serial Number: 10132024097 - 1x Twin Disk Ship Reversing Gear, Serial Number: 2437795 - 1x Phyton-Drive, type P501-L-80, for 80 mm shaft incl. adapter flange for MGX 5114 - SFK bearings (HEPA) - 1x Automatic lubrication system for shaft system - 1x intermediate shaft (Stuth), incl. 2x shaft flange, incl. 6x shaft pins, incl. 2x keys for intermediate shaft - 1x pillow block housing - 1x spherical roller bearing - 1x Clamping sleeve - 2x fixed ring - 1x four-lip seal for housing Volvo warranty extension until December 2025

Key data: 1000 KW, 1500 1/min

Deutz/MWM TBG 620 V12k Maker: MWM/Deutz Type: TBG620 V12k Fuel: Natural gas Power rating: 1000 kW Year of manufacturing: 2000 Alternator: (0,4 kV, 1175 KVA 50HZ, 1500 RPM) Running hours: 40 000 Turbocharger: ABB TPS 52 Engine control system: TEM-EVO-1 SCOPE OF DELIVERY: Engine Alternator Base frame Heat exchanger Transformer (1250KVA, 20/0,4kV) Control panel Gas street History: Well maintained set, good condition. All regular service has been done by local OEM company. Engine stopped since 2022 , April.

turning diameter over bed: 340 mm turning diameter over slide rest: 177 mm turning length: 630 mm spindle turning speed - stepless: 55-3000 U/min weight of the machine ca.: 1.55 t dimensions of the machine ca.: 2 x 1 x 1.6 m Digital read-out HEIDENHAIN Misc.accessories www.marcels-maschinen.ch The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

We are selling here a refurbished cylinder head from M.A.N. . For: E2842 LE322,

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 2,25/3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0360 mm : 215 mm : 1000 mm : 180 mm : 42 mm : 3,75 kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: 0560 mm : 390 mm : 2000 mm : 280 mm : 80 mm : 11,25 kW spindle turning speed - stepless: 20-2000 U/min spindle taper: K 8 DIN 55027 0 The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: mm turning diameter over slide rest: mm turning length: mm total power requirement: kW weight of the machine ca.: t required space: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 500 mm turning diameter over slide rest: 330 mm turning diameter in the gap: 600 mm turning length: 3000 mm bed width: 505 mm spindle bore: 72 mm spindle head: DIN 55022 Gr. 8 taper in tailstock: MK 5 turning speed range: 22,4- 1120 U/min power requirement: 18,5 kW dimensions: 5,3 x 1,75 x 1,53 m weight of the machine ca.: 5,2 t used lathe in nice condition with digital scale - 2 axis digital scale - 4 jaw chuck Ø 250 mm - 3 jaw chuck Ø 260 mm - Multifix C toolholder system - some toolholders - steady The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter over bed: 390 mm turning diameter over slide rest: 190 mm turning length: 1000 mm turning dia. in gap: 460 mm spindle head: DIN 55026 Gr. 6 spindle bore: 52 mm turning speed range: 11,2 - 2240 U/min power requirement: 7,5 kW bed width: 355 mm dimensions: 2,8 x 1,3 x 1,6 m weight of the machine ca.: 1,9 t Equipment: - Multifix B with 5 pic. toolholders - 3-jaw-chuck Ø 250 - coolantsystem - 2-axis digital readout Heidenhain - some jaws The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 1 KW, 5000 1/min

Synchronous servo motor with OCT single /multiturn 24-bit, SIL2, feedback

Key data: 2 KW, 4000 1/min

Synchronous servo motor with OCT single / multiturn 24-bit, SIL2, feedback

Key data: 3 KW, 4000 1/min

Synchronous servo motor with OCT single / multiturn 24-bit, SIL2, feedback

turning diameter over bed: 480 mm turning diameter over slide rest: 260 mm turning length: 1500 mm turning diameter in the gap: - mm turning speeds: 90 - 1120 U/min centre height: 240 mm spindle bore: 52 mm total power requirement: 7,5 KW weight of the machine ca.: 2,3 t dimensions of the machine ca.: 3,0 x 1,3 x 1,5 m Engine Lathe - 3-jaw chuck (200 mm) - Quick-change tool post - Steady rest - Machine lamp - Chip tray - Center point The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 2000 KW, 1000 1/min

7pcs MWM TBDG 441 BV16 ,dual fuel, gas/diesel, operational, also as spare parts carrier, turbocharger, injection pumps, cylinder heads, pistons, liners, crankshafts, ec ec . 2 AVK 6000V generators, 50Hz, 2000KVA,

Leit & Pull Spindle Lathe "DREHMA - D410x1500mm -Demonstration machine - year 2025 -CE - Identifier -Digital display -Turning diameter over bed 410mm -Turning length 1500mm -Turning diameter over support 255mm -Turning diameter in the offset 580mm -Spindle Passage 52mm -Speed range 45-1800 rpm -Automatic longitudinal/plane feeds -Thread/Inch/Metric etc. -Tailstock Mk4 -Central lubrication -Drive power 3.5 KW -Fixed / Rotating bezel -Multifix holder with 4x inserts -Three-jaw chuck 200mm Hsbknowatv Ss Au S Tel -Four-jaw chuck 250mm -Face Plate -Lining protection -Front safety device -Coolant device -Work light -Running tip -Machine feet Dimensions: LxWxH 2.5x1x1.6 meters / Weight 1800Kg

Optimum Lathe D330 x 1000 SG -Center width: 1000 mm -Circumferential diameter over bed: 330 mm -Circumferential diameter over support: approx. 190–200 mm -Spindle bore: approx. 38 mm -Spindle mount: Camlock (mostly D1-4) -Speed range: approx. 70 – 2000 rpm (stepped) -Feeds: longitudinal and flat, automatic -Threading: metric and imperial possible -Motor power: approx. 1.5 – 2.2 kW -Voltage: 400 V / 3 phases -Tailstock mount: MK3 - Spindle holder: MK5 -Work light -Three-jaw chuck -13x Face Plates/Drive Plates -Multifix with 1 steel holder -Machine feet -Lining protection Dimensions: LxWxH 1.9x0.7x1.5 meters / Weight 700Kg

Offer 26143 Technical data: - Tip height 165 mm - Center width 750 mm - Turning diameter over bed 330 mm - Turning diameter via face slide 170 mm - Spindle bore 42 mm - Pick-up cone of the tailstock quill MK 3 - Travel of the tailstock quill 140 mm - Spindle speeds 18 - 2000 rpm - Feeds longitudinal + flat - Metric thread pitches - Inch thread - Module thread - Drive 400 V / 1.5 / 2.8 kW - with: - 2 pieces 3 jaw chucks - Bezel - 4 pieces SWS steel holder - Div. Drehmeisel - Space requirement approx. W 1800 x H 1150 x D 900 mm - Weight approx. 800 kg

Hamlet of Commodor B -GS - Identifier -3 - Axis digital display "NEW" - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Four-jaw chuck - Electric lining protection -2x Emergency / Off -Swarf back wall -Coolant device - Work light - Multifix with inserts -Documentation

Weiler Commodor B incl. 3 - axle digital display /Heidenhain - GS - Identifier - 3 - Axis digital display - Tip height 180mm - Center width 1000mm - Spindle passage56mm - Spindle speed 25-2000 rpm - Automatic longitudinal + face feeds - Thread / Metric / Inch / Diametrical / Module - Three-jaw chuck - Feed protection - 2x Emergency / Off - Swarf back wall - Multifix with inserts -Machine feet - Documentation Dimensions: LxWxH 2.5x1.3x1.7 meters / Weight 1500Kg

Lead & Pull Spindle Lathe EXCELLO - DLZ 500 SL -Tip height 250mm -Turning diameter over bed 500mm -Turning diameter over support 310mm -Center width 3000mm -Rod passage 65mm -Speeds: 28-1400 rpm -Automatic longitudinal/plane feeds -Three-jaw chuck 250mm -Four-jaw chuck 250mm -Multifix base holder with inserts -Bezel -Tool cabinet -Documentation Dimensions: LxWxH 5.5x1.4x1.6 meters / Weight 3500Kg

Guide & Tension Spindle Lathe GEMA LZ 200 -Three - Axis Digital Display "NEW" -Guided tours " VERY GOOD" -Tip height 200 mm -Center width 1000 mm -Turning diameter over bed 400mm -Turning diameter over support 200mm -Spindle passage 54 mm -Automatic longitudinal/plane feeds -Speed range 36-2200 rpm -Tailstock MK 4- Adjustment 200mm -Three-jaw chuck 250mm -Electric lining protection -Multifix with inserts -Coolant device -Work light -Machine feet -Chip tray Dimensions: LxWxH 2x1.2x1.6 meters / Weight 1800Kg

WEILER Intern 800R Ladder & Pull Spindle Lathe -Turning diameter over bed 300mm -Turning diameter over support 150mm -Turning length 800mm -Spindle bore 42mm -Speed range 40 - 2000 rpm -Automatic longitudinal/plane feeds -Thread/Metric/Inch -Tailstock MK 3 -Drive power 3KW -Multifix with inserts -Three-jaw chuck 160mm -Lining protection -Swarf back wall with work light -Interchangeable wheels -Drill chuck -Rod passage 42mm -Tool cabinet -Documentation Dimensions: LxWxH 1.8x0.8x1.6 meters / Weight 750Kg

WEILER LZ330 / From educational institution incl. new 3-axis digital display -Turning diameter over bed 330mm -Turning diameter over support 165mm -Turning length 800mm -Speed range 25 - 2800 rpm -Automatic / longitudinal plan feeds -Multifix with 3x inserts -Drive power 3KW -Three-jaw chuck -Collet device with 20x collets -Copying device -Miscellaneous Accessories -Documentation Dimensions: LxWxH 1.8x0.7x1.6 meters / Weight 750Kg

VOEST DA 360 - Lead & Pull Spindle Lathe -Heidenhain digital display -Peak height above bed 400mm -Turning diameter over bed 800mm -Turning diameter over support 500mm -Turning length 1000mm -Rod passage approx. 87mm -Speed range 14 - 1000 rpm / 18x speeds -Automatic length / face feeds -Automatic input Z-axis -Tailstock MK 5 -Wedge bar chuck 250mm -Multifix base holder with insert -Work light -Machine feet -Documentation Dimensions: LxWxH 3x1.5x1.7 meters / Weight 3500 KG

GALLIC 16 N lead and pull spindle lathe with ACU-Rite digital display - Turning diameter over support 200mm - Turning diameter over bed 320mm - Tip height 160mm - Center width 1000mm - Speed range 45-2500 rpm - Spindle bore 40mm - Automatic feeds X/Z axis -Spindle bore approx. 42mm -Quick-change holder -Thread/Metric/Inch etc. -Tailstock MK 4 -Electric lining protection -Three-jaw chuck -Swarf back wall LxWxH 2.4x1x1.7 meters / Weight 1600Kg

Lead and tension spindle lathe Weiler Matador -Center width: 500 mm -Tip height: 140 mm -Feed range longitudinally over belt: 0.05–0.40 mm/rev -Feed range longitudinally via interchangeable gears: 0.018–0.800 mm/rev - Spindle head: size 5 -Drive: three-phase motor -Speed range: 15–3,550 rpm -Coolant pump -Wedge bar chuck Forkardt F 160 -Quick-change holder rotary flash -4 lathe chisel holders Dimensions: LxWxH 1.5x0.6x1.2 meters / Weight 600Kg

Key data: 410 mm, 800 mm

TECHNICAL DATA Lathe Weisser Heilbronn Model No.: SENIOR Y.O.M. 1984 Centerheight 410 mm Swing over bed 810 mm Swing over Support 564 mm Spindle bore 105 mm max Workpieceweight between chuck and Pinole 22 tons Spindlerevolotions 8 -- 1250 Rev/min Main motor 15 kW Rapid traverse longitudinal 4 Jaw chuck 700 mm Moving Protection for guideaways longitudinal Digital Read Out 1 Steady Rest 0 - 130 mm Quick change Toolpost with inserts Coolant