135,425 used machines on RESALE, but how to find them? Machine Search
20161 TWIN DISC MG 5091 3.82:1 325 HP 1800 RPM RUNNING TAKEN OUT AVAILABLE SPECIFIC INFORMATION SAE Housing Flexible Coupling Controls - No MECHANICAL SPECIFIC FEATURES Brackets No Oil cooler - DIMENSIONS 60 X 60X 80 Weight (kg) 360 KG
MITSUBISHIS12A2 MPTK940 HP1940 RPM RUNNER ENGINE EXCELLENT CONDITION AVAILABLE SPECIFIC INFORMATION Flywheel housing SAE 0 Governor MECHANICAL Cooling system KEEL COOLING Starter 2 X ELECTRIC 24 V Remarks EXCELLENT CONDITION, FIXED ON STEEL FRAME DIMENSIONS LxWxH (cm) 2,291 x 1,418 x 1,596 Weight (kg) 3,800 KG
AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (75 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Old part deposit: 6,000 euros
Motor Perkins 704.30 # UA80973U857134J completely overhauled replacement engine incl.3.PTO finish without starter + alternator, flywheel. All wear parts renewed incl. Engine test run. 12 months warranty
AT-Motor, repaired according to RAL-GZ 797 Complete motor, version biogas Four-stroke petrol gas engine (110 kW) 6 cylinders in series water-cooled engine cooling water-cooled exhaust pipe Charging: Exhaust gas turbocharger with water-cooled turbine housing Mixture cooler: two-stage mixture cooling with high and low temperature circuit Old part deposit: 6,000 euros
Brand Engine CUMMINS Model KTA 38 M2 Power 1300 hp RPM 1800 rpm Serial Number 33167700 General condition Low hours excellent condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged and aftercooled Sea water pump Starter Panel Water Pump Weight (kg) 4300 Dimensions (cm) 215 x 146 x 208
Maximum diameter to turn on the bench 2,110 mm Maximum diameter to turn on trolley 1,600 mm Maximum distance between platforms 12,830 mm Spindle hole diameter 155 mm Cone on spindle no. 120 metric Cone on spindle (with reduction) no. 6 clamps Cone on the counterpoint (6-bit reduction) no. 120 metrics Maximum stroke of the counterpoint 400 mm DSeed from the tool support plane to the axis of the 80 mm centers Main engine power 100 HP Spindle speed from 0.9 to 90 rpm with continuous variation Longitudinal feed no. 36: 0.2 to 12.8 Transverse advances No. 36: 0.1 to 6.6 Metric fillets #26: 1 to 42 Whitwoth fillets #17: 0.5 to 11 Quick forwards Maximum permissible load on the tips 50-60 ton Refrigerant liquid system
Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180
MAN 2876 E312 gas engine It is a refurbished exchange engine. Repaired in accordance with MAN manufacturer guidelines and RAL quality seals. - Four-stroke gasoline gas engine, 150 kW - 6 cylinders in series - Engine cooling: water-cooled - Water-cooled exhaust pipe Installation, installation and service around engine and CHP optionally possible. Old part deposit: 6.000,- EUR Please contact us for a written offer.
Scania DC 12, complete engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - with exhaust manifold - with thermostat housing - with oil filler nozzles - Turbocharger as needed Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.
Manufacturer: Engel Verstellmotor Geräteträger, Year: 1994, Type: Serie A/GNM 4150-B5.2, Volt/Hz: 42/3,1 mpere, pm: 3000, Year :1994
Manufacturer: Perske Fräsmotor Hydrospindel, Type: Fräsmotor, Maschinennummer: KCS 72.24-2 D, aus Maschine: Homag, Amper 1: 22,5/13/20, Hz 1: 50/100/120, Power kW: 7/11, Speed rpm: 2870/5880,
Manufacturer: Indramat Permanent Magnetmotor , Type: MDD112B-N-040-N2L-130GA0, Motor with gear: n 4000 Umin, Gear: Km 0,42 Nm/4, Maschinennummer: MDN 17,5, From machine: IDN 41,5,
Scania DC 12, fuselage engine It is a refurbished exchange engine. Repaired according to manufacturer's guidelines and according to RAL quality seals. - without exhaust manifold - without thermostat housing - without oil filler nozzles Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer.
Peak height 2,600 mm Point distance 10,000 mm Closed bench 2,000x6,000 mm To be completed with CNC
Manufacturer: Siemens Achsmotor für Ima Maschine, Type: 1FK6063-6AF71-1AG0, Motor with gear: yes, Maschinennummer: YF M110 5834 02 003, From machine: IMA BIMA, Motor with gear: yes,
Height tips 220 mm Useful length 1,000 mm 42 mm bar pass
Manufacturer: Weeke Z-Achsmotor, Type: MDD07B-N-060-n2S-095PL1, Volt: 24, Motor torque Nm: 4.40/6.60, IdN A: 15.00/22.60, N1-rpm: 6000, Weight approx. kg: 9,
Manufacturer: Perske Fräsmotor mit Hydrospannung, Type: KRSV 61.13-2 D, Flange motor design: 4,5-7.5 kw , Foot motor design: U/min 9570-17550, Diameter mm: Hz 167-300, Bore mm: Volt 194-350,
Brand Engine Model Power 880kW RPM 1600 RPM MITSUBISHI S12R- MPTA Serial Number 11091 General condition Excellent Condition Options Flywheel housing SAE 0 Flywheel Governor Exhaust system Turbo Cooling system Mechanical Turbocharged, single cooling, charge air cooler integrated in jacket watersystem Starter Panel Water Pump Weight (kg) 5,470 Dimensions (cm) 241 x 158 x 180
Manufacturer: Siemens Getriebemotor, Type: RPL 40-1 H 9486 1/5 BK, Volt: 375, n-min: 18, pm: 4800, Weight approx. kg: 50,
Manufacturer: Perske, Type: KCS 71.16.-2 D, Amper 1: 14,5/8,4/12, Power kW: 4-6, pm: 2870/5870,
Manufacturer: Motovario Neu, Year: Winkelgetriebe, Motor with gear: 20-1041169961, Ampere 1: 50/0,25 kw, Year :Winkelgetriebe
MWM TCG 2016 V 12 exchange unit It is a complete, refurbished exchange unit (motor + generator + basic frame). Repaired according to manufacturer's guidelines and according to RAL quality seals. Further information on the scope and execution can be found on our homepage buecker-essing.de Installation, installation and service around engine and CHP optionally possible. Please contact us for a written offer. We also have other replacement engines, as well as AT cylinder heads, turbochargers, spare parts and other components in stock.
20191 Brand Gearbox ZF Model Gearbox BW 191-1 Ratio 4.393:1 Power 480 kW RPM 1800 Serial Number 2113 General condition Taken out running condition Options Flexible Coupling SAE Housing Controls Mechanical Specific Features Brackets Oil cooler Weight (kg) 632 Dimensions (cm) 70 x 85 x 120
Equipped with no. 03 guides Overhauled with: guide grinding, CN conversion, new electrical and hydraulic system, hydraulic self-centering installation, shaving conveyor; CN Fagor 8055 Numerical Control – BT Maximum turnerable diameter 1800 mm 3-grife hydraulic self-centering with a diameter of 1450 mm with tightening force 30 Ton with 30 bar clamp L max turnerable 3000 mm Spindle engine power 110 Kw Maximum rotation speed 180 rpm Fast value axles 4000 mm/min M3/M4 Spindle Rotation Inversion Possibility 4 speed ranges Hydraulic counterpoint Maximum capacity of workpiece on counterpoint 12500 Kg It is currently possible to work details of up to 3000 mm length but the extension pallet is available to be able to work details up to 8 m in length. (un revised); Machine installed and working
Manufacturer: SBA Trafo, Type: SFT, aus Maschine: UV Trockner, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C=4Uf, Hz 1: 50, V2: 6000,
Platò diameter: 1300 mm Used lathe in good condition, available unless sold.
Manufacturer: SBA, Type: SFT, Maschinnumer: 134-014, Prim:: 380, Sek:: 2000, Btr:: DB, Schaltgr.: C= 4 UF, Volt: 6000,
Manufacturer: Weeke, Year: 1999, Type: aus Weeke BP 195, Motor mit Getriebe: yes, aus Maschine: 195 Weeke, I-KL: 7,5-10, Motor mit Getriebe: yes, Baugrösse L x B x H mm: Werkzeugaufnahme HSK 63 F/18000-24000 Umin/12 KW Spindel, Year :1999
maximum number of results exceeded
please refine your search
