negri bossi v used for sale

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: Yes , Starter Voltage: 24 Volt , Rated Power: 346 Kw, Rated Speed: 2100 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d16e-eae3-used/110, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: D16E EAE3; Transport weight [kg]: 1350

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Watercooled , Exhaust System: Watercooled , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 478 Kw, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d16c-c-mh-used/799, , = More information =, , Type: Engine, Type of fuel: Diesel, Year of construction: 1010, Type number: D16C-C MH; Transport weight [kg]: 2100

Engine Brand: VOLVO, Conditie: USED, Nominal Power @ Nominal Rpm: 309 Kw, Bore: 131 mm, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 309 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d12a-420-used/317, , = More information =, , Type: Engine, Type number: D12A 420; Transport weight [kg]: 1140

Engine Brand: DEUTZ, Condition: USED, Nominal Power @ Nominal Rpm: 640 Kw, Bore: 132 mm, Stroke: 160 mm, Engine Capacity: 35033 cc, Qty Cylinders: 16 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Starter Voltage: 24 Volt , Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/deutz-tbd616-v16-used/324, , = More information =, , Type: Engine, Year of construction: 1010, Type number: TBD616 V16; Transport weight [kg]: 1350

Engine Brand: CUMMINS, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: White , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 905 Kw, Rated Speed: 18000 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/cummins-vta28-m2-used/157, , = More information =, , Type: Engine, Type of fuel: Diesel, Type number: VTA28-M2; Transport weight [kg]: 2000

x-axis: 1000 mm y-axis: 500 mm z-axis: 500 mm dividing head: CNC Axles: 4 spindle taper ISO: 40 table surface area: 1200x508 mm Table load: 600 kg control: Fadal CNC 88 HS Number:: 9505858 turning speeds: 40-7500 U/min Tool changer: 21 Tool changer: 20-fach The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution o ...

Vivid Matrix MX-370P laminator with Omniflow Specifications: • Machine is already dismantled and stored • Laminating machine with manual system • Easy set-up • Fast and safe film roll change • Swing-out, patented control panel with monochrome display, control via buttons • Simple, self-explanatory symbolism • Easy feeding of the sheets with defined attachment point and automatic Scaling • Adjustable speed, temperature and roller pressure • "Anti-Curl Technology" – laminated arches that lie perfectly flat every time •Auto. Sheet separation after lamination • Compact design • Ideal for business cards, book covers, flyers, brochures, invitation cards and much more • Faster Foiling KIT for faster sleeking – up to 5 m/min. • Ultra-quiet compressor for pneumatic pressing • Console on castors for easy change of location • IVIVID Matrix  ...

x-travel: 610 mm y-travel: 510 mm z-travel: 610 mm table-size: 760 x 510 mm workpiece weight: 1350 kg spindle taper:: SK 40 spindle turning speed range: 15000 U/min spindle motor: 9 kW distance spindle /table: 150-760 mm rapid traverse: 38/38/32 m/min Control: WinMax 5 total power requirement: 19 kVA Total weight, approx.: 5000 kg dimensions of the machine ca.: 2,3 x 2,95 x 2,55 m 3-axis machining centre with electric spindle (D series) equipped with: - WINMax 5 CNC control with 3D simulation graphics & handwheel - 30-fold Toolchanger (SK 40) - Chip conveyor - Renishaw probe - Dynamic diret tdrives on all axes - High-pressure cooling system - Spindle cooler The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

greates pass round over bed: 810 mm swing diameter over face slide: 560 mm centre distance: 2000 mm bed width: 480 mm slide valve travel: 400 mm upper head travel: 180 mm turning tool - shaft cross cut: 32 x 25 mm power capacity: 22 kW max. torque on the spindle: 3200 Nm spindle head: Gr. 11, DIN 55027 spindle diameter in front bearing: 152,4 mm spindle bore: 106 mm turning speed range: 9 - 1800 U/min turning speeds: 24 longitudinal feeds:: 0,092 - 41 mm/U face feeds: 0,046 - 20 mm/U metric threading: 0,5-112 mm inch threading: 1/4 - 56 G/1 thread - module: 0,125 - 28 mm thread - DP: 1 - 224 Pitch tailstock quill diameter: 115 mm quill stroke: 225 mm taper of tail spindle: MK 6 max. workpiece weight between centres: 2000 kg max. workpiece weight -without tailstock: 750 kg 3-jaw chuck: Röhm, Ø Overall size: ca. 4600x1900x1600 mm weight: ca. 4300 kg Number of feed stages and threads: 99  ...

2 pieces (identical) used lathes Turning center milling center INDEX R200 INDEX VirtualLine Year of construction 2011 and year of construction 2009 At that time, the original price of both machines together: €1,385,647.90 gross Regular service only from the manufacturer INDEX. Service and parts exchange alone between 17.04. and 05.08.2025 in the amount of € 96,305.41 (invoices are available for inspection). Therefore, the machines are in absolutely excellent condition. Spindle hours (as of 21.11.2025) Year of construction 2011: S1: 4,114 h S2: 3,064 h S3: 2,535 h S5: 4,170 h Spindle hours (as of 21.11.2025) Year of construction 2009: S1: 2,951 h S2: 953 h S3: 3,524 h S5: 5,990 h Turning-milling centre with roller bearing slide guides Work spindles can be moved on slides. Tool carrier integrated into recesses in the machine bed, all linear axes arranged at  ...

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 295 Hour(s), Engine Condition: Used , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/volvo-td121gpb-pump-580mh-used/4231 6, , = More information =, , Empty weight: 1.850 kg, Type number: TD121GPB POMP 580M³H

NEW Virginia Transformer 120 MVA Step-Up Transformer, 34.5kV Grounded Wye -> 230kV Grounded Wye One (1) New, Substation Transformer 120 MVA, 230/34.5/13.8 kV. 60 Hz. 3 Phase INSULATION LEVEL (BILL) HV Line WDG / BUSHING: 750/900 KV HV Neutral WDG / BUSHING: 200/200 KV LV Line WDG / BUSHING: 200/250KV LV Neutral WDG / BUSHING: 200/200KV STANDARDS: IEEE C57.12.00 - 2015 Frequency: 60 Hz. Vector Group: YNyn0+d1 Oil Preservation system: Conservator Insulation Oil: Type II Mineral Oil Rated voltage (volts): 230 000 GrdY/132 790 - 34 500 GrdY/19 919 -13 800D Manufacturing Year: 2022 Warranty expiration Date: April, 2031.

NEW Virginia Transformer 120 MVA Step-Up Transformer, 34.5kV Grounded Wye -> 230kV Grounded Wye One (1) New, Substation Transformer 120 MVA, 230/34.5/13.8 kV. 60 Hz. 3 Phase INSULATION LEVEL (BILL) HV Line WDG / BUSHING: 750/900 KV HV Neutral WDG / BUSHING: 200/200 KV LV Line WDG / BUSHING: 200/250KV LV Neutral WDG / BUSHING: 200/200KV STANDARDS: IEEE C57.12.00 - 2015 Frequency: 60 Hz. Vector Group: YNyn0+d1 Oil Preservation system: Conservator Insulation Oil: Type II Mineral Oil Rated voltage (volts): 230 000 GrdY/132 790 - 34 500 GrdY/19 919 -13 800D Manufacturing Year: 2022 Warranty expiration Date: April, 2031.

Engine Brand: VOLVO, Condition: USED, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Red , Working Hours: 357 Hour(s), Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 24 Volt , Rated Power: 256 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/pumps/volvo-td121gpb-pump-580m3h-used/423 17, , = More information =, , Empty weight: 1.850 kg, Type number: TD121GPB POMP 580M³H

Engine Brand: VOLVO, Condition: CORE, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Engine Condition: Revisie rijp , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: No Starter Present , Rated Power: 265 Kw, Rated Speed: 2200 Rpm, Injection Type: Mechanical Fuelpump , , https://www.hamofa.com/stock/diesel-engines/volvo-td121-core/42303, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.115 kg, Type number: TD121

Engine Brand: VOLVO, Condition: RECONDITIONED, Nominal Power @ Nominal Rpm: 181 Kw, Nominal Rpm @ Nominal Power: 2300 Rpm, Engine Color: Green , Engine Condition: Rebuild , Turbo Type: Dry , Rated Power: 200 Kw, Rated Speed: 2300 Rpm, Injection Type: Electronic Fuelpump (EDC) , , https://www.hamofa.com/stock/diesel-engines/volvo-tad750ve-recondition ed-longblock/42332, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 500 kg, Type number: TAD750VE

Engine Brand: KUBOTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Blue , Flywheel Housing SAE: NO SAE SIZE , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 12 Volt , Rated Power: 35 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/kubota-v2403-t-new/42309, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 220 kg, Type number: V2403-T

SPECIFICATIONS: Hopper opening: 1300 x 600 mm Installed power: 15 kW Rotor: Ø 250 mm Rotor width: 600 mm 014 Knife Screen: 16 mm EQUIPMENT: Replacement Knife

VENETA MACCHINE Papper Feed Indexing Band Saw Wheel diameter 800mm Cutting width 16-180mm Maximum cutting height at feed 135mm Maximum cutting saw width 40mm Hydraulic Cutting Belt Tension Material Pulling Tape 2 rollers pulling from above Feed speed Automatic access to the desired size Quick select of 4 saved programs Motor power 5.5kw CE Certificate Net price 25.000PLN

Mazatrol Matrix Control Travel X-axis: 630 mm Y-axis: 765 mm Z-axis: 510 mm A-axis: +30°/-120° C-axis: 360° Max. distance from spindle nose to table top edge (table horizontal): 740 mm Min. distance between spindle nose and top of the table (table horizontally): 230 mm Max. distance from spindle nose to table center (vertical): 690 mm Min. distance from spindle nose to table center (vertical): 180 mm Max. table load: 500 kg Max. workpiece diameter: 730 mm Max. workpiece height: 500 mm Pallet Changer – Mazak Palletech System 6-fold pallet changer Pallet size: 500 x 500 mm Milling spindle SK-40 Max. spindle speed: 12,000 rpm Drive power milling spindle: 22Kw Tool magazine Number of tool positions: 120 Other equipment • 5-axis simultaneous machining • Synchronized tapping • Rapid traverse constant angle of inclination when moving 3D coordinate conversio ...

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Suitable for the automated machining of PCD-tipped milling cutters, end-cutting tools, and disc-shaped tools such as saws, milling cutters, etc., using wire EDM. Accessories: Total enclosure, External PC with contour management and Exprog software, Cooling unit for dielectric fluid, Automatic fire extinguishing system, Automatic central lubrication, Extraction system,, Measuring probe, Machine lamp, Workpiece carrier SK 40, Measuring mandrel SK 40, cutter outer diameter: Max. 320 mm, Shank tool diameter: 10-320 mm, Outer diameter disc-shaped tools: Max. 320 mm, Cutting length: max. 480 mm, X-axis travel: 500 mm, Tool weight: max. 20 kg, Y axis travel: 300 mm, Travel path W-axis: 200 mm, Machine space requirements: 2535 x 2200 x 2280 mm, A-axis rotation range: 360°, E-axis swivel range: 180°, Weight approx.: 4800 kg, Connected load: 5,4 kW, colour: grey RAL 7035/7043

Manufacturer: Vitronics Model: 7038 Year of Manufacture: 2004 Power: 55 kVA Voltage: 3 × 400 V Frequency: 50 Hz Machine Weight: 2700 kg Air Pressure: 6 bar N₂ Pressure: 6 bar N₂ Consumption: 50 m³/h Largest Load: 63 A Find more here - / Contact us at -

Year: 1983 Explosion-proof Subject to prior sale - errors possible Internal reference number: M-1212

Soundproofed generator with Volvo diesel engine. The system was intended as an emergency power generator, but was never used, only for test purposes. PRP power: 658 kVA LTP power: 723 kVA Year: 2023 Hours: 3 Cooling: Water with radiator cooler Speed: 1500 1/min Generator: MeccAlte ECO40-2L Voltage: 400/231 V Frequency: 50 Hz Tank capacity: approx. 650 litres Control cabinet: Pramac ACO3 controller for manual and automatic operation. Subject to prior sale - errors possible! Internal reference number: E-1004-106

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm Control: total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Photo of machine already delivered in similar scope: -major maintenance -New table geometry -partial painting of the interior grinding wheel equipment LEFT 400x63x127mm (standard) grinding wheel equipment RIGHT 300x40x127mm Internal grinding unit Ø120mm for HF spindles CNC control KELCO 120 C-axis for non-circular grinding. Kel-Poly B-AXIS: CNC-controlled B-axis KELCO 120: v constant 35m/s or 45m/s High-frequency internal grinding spindle Operating unit for MFV and MFZ spindles Hydraulic quill retraction for the tailstock NO micro-adjustment on the tailstock Spring-loaded quill insert Top table cooling Standard workpiece headstock MK 5 DIN 55026 size 5 Micro-adjustment for the standard workhead Dressing device ...

grinding diameter: 450 mm grinding length: 1000 mm centre height: 225 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m As the world’s leading company in Kellenberger overhaul and retrofit we are not only able to deliver machines in a quality similar to a new machine and with warranty, but we can also offer you the service for your machines.The machine will be delivered overhauled. Mechanical overhaul: • Overhaul of the entire machine according to Kellenberger measuring protocol • A new service-friendly cabin • Repainting Electrical overhaul: • New, modern CNC cylindrical grinding machine control system • New built up control cabinet • New drive technology • Exchange of all electric lines, Berus pressure switch, etc. • New absolute glas scales in X- and Z- axis • New absolute rotary encoder (for B-axis) Please remark ...

Vertongen M-300 Combi Through Grinder Working width 300mm Working height up to 200mm Combi unit with boot Pneumatic Oscillation Manual lifting and lowering of the workbench Two feed speeds 5.5kw main motor Sandpaper 300x1900mm Weight about 600kg

New Kelvion / Goedhart VCe-i 635010 Freon evaporator with hot gas defrost built in 2020. Complete with 3 Ziehl-Abegg fans - 50 Hz - 0,72 kW - 1240 RPM - diameter 500 mm and a total airflow of 25.437 m³/h. Specifications: Brand: Goedhart Type: VCe-635010 Capacity: 36,6 kW Refrigerant: Freon Number of fans: 3 Fin space in mm: 10 mm Defrosting: Hot gas Air flow: 25.437 m³/h Sizes: 3560x1000x1010 mm (LxWxH) Year of built: 2020 Volume: 43 dm³ Weight: 340 kg

The machine is in good technical condition, after prior agreement it is possible to test it. Table working area W x D (mm) 1000 x 510 T-slots (DIN 650) 5 x 18 x 100 Max. load (kg) 2000 Travels: X axis (mm) 750 Y axis (mm) 500 Z axis (mm) 510 Spindle taper (DIN 69871 A) SK40 Spindle power (kW) 18 Rapid traverse X/Y/Z axes 32/32/24 Maximum spindle speed (rpm) 12000 Automatic tool changer: Number of positions 30 Tool diameter max. (mm) 80/75 Tool length max. (mm) 300

Two identical CNC lathes Scherer Feinbau are available. Swing diameter: 200mm, travel path X/Z: 240mm/280mm+515mm, max. workpiece height: 100mm, spindle nose taper: A4, spindle power: 7.6kW, spindle torque: 60Nm, speed: 8000rpm, travel speed X/Z: 60m/30m/min. Weight: approx. 5500kg, control: Siemens Sinumerik. Documentation vorhanden. An on site inspection is possible.

Operating pressure: 10bar, max. temperature: 40°C, cooling medium: R134A, quantity: approx. 500g, weight: approx. 450kg. An on site inspection is possible.

One Siemens flange gear motor and two identical VEM three-phase motors are available. 1) Siemens flange gear motor, year of manufacture: 2014, shaft diameter: 80mm, power: 160kW, speed: 1485rpm, gear ratio: 33. 2) 2x VEM three-phase motors, year of manufacture: 2017, power: 200kW, speed: 1490rpm, operating mode: continuous operation, power factor: 0.87, weight: approx. 250kg. An on-site inspection is possible. Individual sale possible.

Ein unbenutzter VEM 6300V Schleifringläufermotor (Asynchronmotor) steht zur Verfügung. Bauform: IM1001, Schutzart: IP55, Isolationsklasse: F, Nennleistung: 2580kW (2,58MW), Nennspannung: 6300V, Nennstrom: 276A, Leistungsfaktor: 0,89, Rotorspannung: 2370V, Rotorstrom: 680A, Nenndrehzahl: 993U/min, Gesamtgewicht: ca. 14300kg. Maschinendimensionen X/Y/Z: ca. 3600mm/2300mm/2320mm. Die Maschine ist unbenutzt und somit neuwertig. Eine Besichtigung nach Absprache vor Ort ist möglich.

An unused three-phase electric motor VEM is available. Design: IM1001, protection class: IP55, rotation direction: CCW, insulation class: F, lubrication system: Shell Alvania RL3, rated power: 4600kW (approx. 4.6MW), rated voltage: 6300V, rated current: 460A, power factor: 0.88, rotor voltage: 2000V, rated speed: 994rpm, moment of inertia: 690km/m². Machine dimensions X/Y/Z: approx. 4150mm/2300mm/1900mm, weight: approx. 20000kg. The machine is unused and therefore as new. Documentation vorhanden. An on-site inspection is possible.

Ref. no.: 18494 Hersteller: ENGEL Year of construction: 2013 Clamping unit Clamping force: 50 ton Opening stroke: 400 mm Mould height min.: 200 mm Opening width: 600 mm Platen size (h x v): 500 X 450 mm Injection unit Screw diameter: 25 mm Injection volume: 69 cm³ Shot weight: 62 g Injection pressure: 2400 bar Measurements and weight Dimensions: 3,4 x 1,3 x 1,8 m Machine weight: 2900 kg Additional information & extras Core pull: 1 pcs Further information: ENGEL ENGEL Victory 50 SPEX (2013) – Tie-Barless Injection Moulding Machine For sale is a high-quality ENGEL Victory 50 SPEX injection moulding machine from 2013. Featuring tie-barless technology and a special SPEX configuration, this machine is ideal for precise and flexible production. Key Advantages: Tie-barless design → maximum mould accessibility SPEX special configuration → optimized for specific applications High precision ...

Key data: 1400 KW, 1800 kVA, 10500 V

MWM Gas CHP TBG 620 V16 K Gas electricity and heat generator from 1999, 83,369 operating hours, with control, silencers and table cooler. 1 available 1,354 KWel x 1,500 rpm, 10,500 V/50 Hz. AC generator: AVK DIG 130 G/4, 1,800 KVA Manufacturer: MWM Model: TBG 620 V16 K Type: Natural Gas CHP Serial Number: 69886800117 Output [KWel]: 1,354 Engine: TBG 620 V16 K Engine serial number: 2201219 Engine power [KW]: 1,400 Year of Make: 1999 Hours: 83,369 Weight gene set [kg]: 13.860 Dimensions LxWxH [m]: 6.40 x 2.10 x 2.30 AC Generator AVK DIG 130 G/4 Manufacturer: AVK Model: DIG 130 G/4 Type: AC Synchronous Generator Serial Number: 8423506 A101 Power [KVA]: 1,800 Voltage [V]: 10,500 Frequency [Hz]: 50 Current [A]: 99 Speed [1/min]: 1,500 Year of Make: 1999 Hours: 83,369

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-S7+299, Vogel 30L, 0.5L/min., max. 27bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been tak ...

Central oil and grease lubrication system, MFE5-BW30 + KFG1-5W2 Vogel, used Special price If you have a VAT number, we will gladly issue you an invoice without VAT. Central oil and grease lubrication system consists of: 1) Central lubrication (oil) MFE5-BW30-SZ, Vogel 30L, 0.5L/min., max. 20bar 2) 2 piston pump units (grease lubrication) KFG1-5W2-M+924, 24V DC, Used! The part was purchased from a certified company's spare parts warehouse, is in good condition and fully functional. We have tested the system's pumps: Oil pump test: it delivers immediately. Test of the 2 grease lubrication piston pumps: The agitator starts immediately and grease delivery begins. If you are interested, we would be happy to show you the test on video. The system can be viewed, tested and collected from us at any time. The level sensor on the oil tank may be faulty, which has been taken i ...

x-travel: 1.200 mm y-travel: 600 mm z-travel: 675 mm Control: Heidenh.iTNC 620 HSCI FS table-size: 1.220 x 620 mm : 40 fach Distance between table and spindle: 735 mm turning speeds: 10.000 U/min spindle drive: 18 kW Internal cooling system: 30 bar total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m -Electronic steering wheel. -LINEAR RULES. -Laser probe measuring tools. -Preparation for piece measuring probes. PROBE NOT INCLUDED. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 / 80 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 765 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAM - DPF400-V980 SKD (BFU 980 /S/20+/8) - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 3 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³/h, 96.6 l/min, pressure 25 bar, max. temp. 90°C 3.0 kW, 3,514 rpm, 20.5 m³/h, 341.66 l/min, pressure 25 bar, max. temp. 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temp. 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

liter capacity: 980 l Pressure of pump: 8 / 20 bar control: Schütze / Contactors total power requirement: - kW weight of the machine ca.: 560 kg dimensions of the machine ca.: 2,3 x 2,0 x 1,8 m Coolant System MAYFRAN - BFU 980 /S/20+/8 - NEW, unused - universally applicable - can be controlled via contactors - incl. paper band filter - Number of pumps: 2 - Pump capacity: 4.0 kW, 2,917 rpm, 5.8 m³, 96.6 l/min, pressure 25 bar, max. temperature 90°C -.- kW, 2,864 rpm, 2.0 m³/h, 33.3 l/min, pressure 25 bar, max. temperature 90°C The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

VACUREMA type 120 T-VS for the processing of rPET, technically qualified overhauled, Built in 2004, capacity up to 650 kg/h, with approval according to the standards of the F.D.A. (USA) and ESFA (EU) for direct contact of food of manufactured rPET products. Electrics European standard. Delivery Time: Short Term. Also Folien + Technik e. Kfm. D-73728 Esslingen Official agent for EREMA GmbH A-Ansfelden Phone +49 1577 5329827

Workpiece diameter: 500mm, workpiece height: 730mm, travel X/Y/Z: 630mm/765mm/600mm, A-axis: -120°/+30°, C-axis: +/-360°, max. table load: 500kg, spindle interface: HSK-A63, speed: 18000rpm, rapid traverse: 52m/min, feed rate: 52m/min, rotary table diameter: 610mm, tool positions: 30, control: Mazak Mazatrol Matrix. Documentation available. An on-site inspection is possible. The machine is located in China.

Sawblade tiltable: - ° cutting width: - mm Motor output: - kW Cutting height: - mm Saw blade diameter: mm Table dimensions: mm Saw blade: mm Dimensions (L/W/H): mm machine weight ab.: kg Control: The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Key data: 100 mm, 1600 mm, 1120 mm

Spindle diameter ... 100mm Axis X ... 1600mm Axis Y ... 1120mm Spindle speed ... 0-1120 rpm Axis W ... 900mm Axis Z ... 1250mm ISO 50 Clamping table surface ... 1250 x 1250mm Main engine power ... 11kW Max. workpiece weight... 3000kg Total power requirement ... 15kVA L x W x H ... 6710 x 3450 x 3000mm Machine weight ... 14000kg The machine is in good condition, possible to test under power in our warehouse.

NGR S-GRAN 65 VHD, Constructed in 2011, offered checked for good conditions, including:, loading conveyor belt, tunnel metal detector, densifier, extruder with 65 mm Ø screw, degassing point, hydraulic screenchanger, water ring pelletizer, drying centrifuge, extraction vent with cyclon and bag supporting structure., conditions: used, checked, type: compact recycling line

impressions: 24 Mio. max. printing speed sheets: 8000 /h max. paper size: 36 x 52 cm dampening system: Varn Kompac The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Replacement gearbox for Nauta mixers, Vrieco mixers For the most common cone mixers, we have numerous used gearboxes and swivel arms in stock. Partly already revised and partly unrevised.

Control Fanuc Max.workpiece diameter ... 800mm Table diameter ... 450mm Max. workpiece height ... 750mm Axis Z ... 780mm Number of positions in the tool changer ... 8 Axis X ... 390mm Axis Z ... 780mm Table speed ... 20-2000 rpm Main engine power ... 30/37kW Max. spindle torque ... 2243/2766Nm Machine weight ... 9000kg L x W x H ... 2000x2800x3300mm