132,018 used machines on RESALE, but how to find them? Machine Search
Stock number: 3994 GABELSTABLER Manufacturer: TRUCKGAFLER VETTER , Type: 7 - 8 - 10 T Ton Year of Make: 2021 Specifications: Lifting capacity 10,000 kg Forklength 2400 mm mm Fork width 200 mm Tykkelse 60 mm
Travel (X / Y / Z) 1,524 mm / 660 mm / 610 mm Table size 1,676 × 660 mm Table load Up to 2,000 kg Spindle holder SK50 DIN 69871 Speed range up to 8,000 rpm Spindle power 22 kW continuous power (30 min. to 26 kW) Coolant by spindle Number of seats standard: 30 Iiebtfbewt N Nhj Tpmsc Tool weight max. 15 kg Tool length max. 300 mm Tool diameter max. 125 mm (if the adjacent space is empty), otherwise 75 mm Rapid traverses (X/Y/Z) 30 / 30 / 24 m/min Machine weight approx. 10,000 Control Hurco WinMax / Ultimax Installation area (L×W×H) approx. 5,600 × 3,900 × 3,300 mm
Travel (X / Y / Z) 762 mm / 508 mm / 610 mm Table size 1,020 mm × 510 mm Table load max. 1,000 kg Spindle holder SK 40 (DIN 69871) Spindle speed max. 10,000 min⁻¹ Spindle power 11 kW Tool Stations 24 Stations, Automatic Tool Changer (ATC) Iobjwt Rfwstfb Tpmjic Max. tool weight 7 kg Max. tool length 300 mm Max. tool diameter 80 mm Rapid traverse (X / Y / Z) 24 m/min / 24 m/min / 20 m/min Feeds programmable up to approx. 7,600 mm/min Control HURCO Ultimax 4 Machine weight approx. 4,700 kg Machine dimensions (L × W × H) approx. 3.9 m × 2.4 m × 2.7 m
A semi-automatic Italian Pack traysealer machine is available. Packaging output with VAC/GAS: 4-5 cycles/min, packaging output with SKIN: 3 cycles/min, vacuum pump output: 63m³/h, max. packaging depth: 120mm, film diameter range: 250mm-340mm, max. film width: 370mm, machine dimensions X/Y/Z: approx. 1100mm/1100mm/1400mm. Including automatic film rewinder. Documentation available. On-site inspection is possible.
Vecoplan hacker, type 65/22/5 Technical data: - max. infeed width 650 mm - max. infeed height 220 mm - 3 feed rollers at the bottom - 2 feed rollers at the bottom - with new through rollers - excl. drive motor
Key data: 170000 KW
Fully Equipped Diesel Power Plant – Over 170 MW Capacity This opportunity is not yet on the market — and won’t be found anywhere else. Contact us now to receive exclusive details and position yourself ahead of the market before the sale is public. END USERS ONLY
Control: Manufacture: FANUC 0i-MD x-travel: 1000 mm y-travel: 550 mm z-travel: 500 mm table surface area: 1100 x 500 mm spindle turning speed - stepless: 10000 U/min dimensions of the machine ca.: 3500 x 2200 x 2700 mmxmmxmm weight of the machine ca.: 6.5 t tool piece magazine with: 24 Plätzen The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Number of spindles: 5 St. Working width: 20 - 230 mm Working height: 8 - 120 mm Length of the planing table: 2000 mm Feed motor: 1,1 kW Feed speed: stufenlos regelbar 2 - 12 m/min. 1 WEINIG VARIOMAT planer and moulder including multifunction / slotting table ---------------------------------------------------------------------- -------- Machine is functionally tested before delivery Technical manufacturers description: -------------------------------------- Working width: 20 - 230 mm Working height: 8 - 120 mm 1st spindle horizontal, bottom --------------------------------------- Motor with brake: 5.5 kW Diameter 40 mm Speed 6000 rpm Tool radius 125 - 145 mm Axis adjustment range 5 mm Folding device including rebate cutter MarathonCoating for table insert before and after the 1st lower spindle 2nd spindle vertical, right --------------------------------------- Motor with brake: 11 kW Com ...
Key data: 45 °, 3 mm, 2 mm
SCM Si400 Vanguard Sliding Table Saw with Touch Screen 3-Axis Control, Mitre Landing Table Mark SCM Type SI400Vanguard M-No.: Year of manufacture 2004 Control panel: 12" touchscreen at eye level, start-stop trolley Control: 3-axis CNC control 1st cutting height 2. Saw blade tilt 3. Cutting width Memory: 999 memory positions, 6 cuts per program, auxiliary function with graphical display, collision warning Edging table 3,200mm Saw blades ø 250-400 mm Main saw 5.5 kW, 3,000-4,000-5,000 rpm Cutting height 130 mm. (Saw blades. 400 mm-90°, 92 mm- 45°.) Saw blade swivel 0 - 45° Scoring ø120 mm 2-axle control: 1. Cutting height (radial) 2. Cutting height (axial) Engine: 0.75 KW, 8,500tpm Cutting width 1,500 mm Rip fence stop ruler in anodised aluminium Landing table: Vanguard walking table with digital angle display +50° to –50° Anodize ...
Year of manufacture 2007 Travel X 1270 mm Travel Y 660 mm Travel Z 610 mm Table size 1500 mm × 660 mm Table load 1300 kg Spindle speed up to 12,000 min⁻¹ Spindle drive approx. 18 kW Tool holder SK 40 Tool Stations 24-Fold Tool Changer Rapid traverse (X/Y) 30 m/min Rapid traverse (Z) 20 m/min Machine weight approx. 9000 kg to 9500 kg Machine dimensions (L×D×H) approx. 3.25 m × 2.35 m × 2.95 m
Name: Hydraulic Power Unit with Electric Motor and Oil Tank Manufacturer: HYDAC (engine by Elprom S.R.L.) Type: 80C4 3030923 Short Description: Compact hydraulic power unit consisting of an electric motor from Elprom (type 80C4), mounted on a HYDAC oil tank with integrated hydraulic block. Suitable for hydraulic applications in machine tools or industrial plants. Power: 1.1-1.3 kW at 230/400 V, 50 Hz. IP54 rating.
Name: Automatic lubrication device Manufacturer: VOGEL Type: 122 135 314 Flow rate: 0.1 l/min Max. pressure: 8 bar Voltage: 100 V / 50/60 Hz Tank capacity: 1.8 l Country: Germany Short Description: Electric central lubrication pump from VOGEL for industrial applications. Compact device with transparent 1.8-litre reservoir for checking the oil level (mark MIN/MAX) and integrated control unit. Ideal for machines or production plants with a central lubrication system. Suitable for oils with high purity. Used condition, technically perfect.
turning diameter: 400 mm swing diameter: 420 mm x-travel: 850 mm z-travel: 315 mm spindle head DIN 55026 - Size: 11 spindle bearing diameter: 140 mm turning speeds: max. 4000 U/min tool turret 12 times: C5 Capto rapid traverse x + z axis: 45 / 30 m/min feeding force: 11 kN total power requirement: 58 kW weight of the machine ca.: 9 t dimensions of the machine ca.: 9,5 x 4,5 x 3 m Hard turning Dry machining Chip conveyor Promot Portal and Cellmaster No clamping device available No tools available no Cellmaster accessories available The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Gassner bolt feeder with pneumatic lifting station and blower. Filter system for air transport with 8m pipeline
A fully pneumatic Polzer glazing press is available. Clamping height: 2300mm, total press height: 2600mm, roller conveyor width: 170mm, roller conveyor height: 250mm, total depth: 1000mm, clamping width: 3500mm, total width: 4500mm. Documentation available. On-site inspection is possible.
saw blade diameter: 350 mm capacity 90 degrees: round: 120 mm capacity 90 degrees: square: 110 mm capacity 90 degrees: flat: 200x88 mm capacity 45 degrees: round: 115 mm capacity 45 degrees: square: 110 mm capacity 45 degrees: square: 150x80 mm Control: total power requirement: 1,5/1,8 kW weight of the machine ca.: 0,59 t dimensions: 1,1 x 0,95 x 1,7 m New machines SPECIAL PRICE includes: - Starter Kit 2 - Micro-spraying system Ready for demonstration in our showroom Roller conveyors optional Hydropneumatic fully automatic · Miter Left/Right · Bevel head cuts up to 45° (shifter) a. b. · Pneumatic vertical clamping device · Vice before and after the saw blade for low-burr cuts · Material hold-down roller · Integrated coolant spray device · Swarf suction nozzle on the saw blade protective hood · Single feed 530 mm · Section length min. 4 mm max. 9,999 mm For profile cuts, the us ...
complete MWM gas installations TBG620V16K 1350 KWe stamford alternator 1680 KVA
Manufacturer: Kraintek Model: HX360-W2/OT/LT+VT1/800x1150x850 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022 Technical Specifications: - Overall Dimensions: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket (container) Dimensions: - External: 470 × 850 × 310 mm - Max Load Capacity: 70 kg - Electrical Requirements: - Power Supply: 3-phase + PE, 50 Hz, 400/230 V, TN-S - Max Power Input: 260 kW - Operating Power: 171 kW - Control Voltage: 24 V - Distribution Box Protection: IP55 - Air Pressure Requirement: 0.4 – 0.6 MPa - Steam Extraction: Connect to central exhaust line - Safety Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -
Manufacturer: Kraintek Model: HX360-W3/LT1+VT1/800x1150x650 Year of Manufacture: 2020 Commissioned on 01.11.2020, and was decommissioned in 2022. Technical Specifications: - Overall Dimensions of the Machine: - Length: 8277 mm - Width: 11,640 mm - Height: 3450 mm - Machine Weight: 15,000 kg - Basket Dimensions: 470 × 850 × 310 mm - Maximum Basket Load: 70 kg - Electrical Data: - Power Supply: 3~N+PE, 50 Hz, 400/230 V, TN-S - Maximum Power Consumption: 260 kW - Control Voltage: 24 V - Current: 396 A - Protection (Electrical Cabinet): IP55 - Compressed Air Connection: 0.4 – 0.6 MPa - Steam Exhaust: Connect to central steam exhaust system - Compliance Standards: - STN EN 60204-1: 2007-06 - ČSN EN 60204-1 ed.2 Find more here - / Contact us at -
Wolf vertical bagging machine, With 2021 Herma labeler and a markem Printer
PRT EXTRUDER for PE PP PC PS ABS, Extruder with 85 mm screw, 30 L/D, 60 kw d.c.Siemens drive 2.200 rpm, Average throughput rate 200 kg/h, depending on materials and feeding rate, Total heaters power 38,6 kw, N.1 vacuum degassing pump, manual screenchanger 120 mm, water ring pelletizer, electric cabinet to be reconditioned - drawings available, New in 1999, availability: READY
CENTRIFUGAL DRYER for pellets (to go with an existing pelletizer), for a 350/400 kg/h capacity of PE PP ABS PS PC flakes, made of sturdy AISI304 stainless steel with vertical axis, driven by a 2.2 kW 3 Ph.asynchronous motor,, complete with soundproofed discharge cyclone, stainless steel tank for water recovery and recycling, 1.1 kW water ump,, equipped with drainage for overflowing, HEAT EXCHANGER GROUP, made of painted carbon steel, internal copper tube bundle, with removable head to facilitate cleaning, fixed to the tank using brackets, float with water replenishment valve, Electrical board of machine wiring, Users manual, CE compliance, installed power - used power in work: about 60-65% : 2.2, conditions: new machine, type: for granulate - this machine goes after the pelletizer, capacity: 300-450 kg/h
VERTICAL MIXER 14.000 lt., Total height approx 5.500 mm, Loading from top with cyclone and dust sleeves collector, Max diam.2.380 mm., Constructed in painted electro-welded carbon steel., Inner auger diam.350 mm., Sampling hopper with safety grid and shutter, mm.600×500, Pulley and belt transmission, protected by carters, Inspection doors with safety limits, Cleaning hinged door with on bottom of cone for complete discharging,, with safety opening, Side discharging pipe to big bag with valve, paddle type max level indicator, automatic greasing kit, 11 kw electric motor, Complete with control panel., Electric voltage: 400 V, 50 Hz, auxiliaries a.c. 24 V, CE compliance and instruction manual, installed power - used power in work: about 60-65% : 11
VECOPLAN VAZ 120/105 U, single shaft shredder for wood, cardboard and paper, transport size : LxWxH 2,49 x 1,88 x 1,35 mt., Infeed size 1,2 x 1,05 m., 235 mm rotor Ø, rotor width 1.070 mm, Weight: approx. 2300kg, Rotor speed: 120 rpm, 18,5 kw 34.5A Electric motor with turbo clutch, V-belt drive, 2-stage, spur gearbox, motor speed 1.455 rpm 400V 50 Hz IP54 des.B3, Cobstructed in 1999, few hours worked, offered reconditioned., installed power - used power in work: about 60-65% : 20, availability: 2 weeks
x-travel: 2360 mm y-travel: 600 mm z-travel: 800 mm total power requirement: kW weight of the machine ca.: t required space: 7.1x3.7x3.2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
saw blade diameter: 360 / 425 / 460 mm cutting diameter: 10 - 140 mm stroke: mm cutting speed: 25 - 160 m/min total power requirement: 35 kW weight of the machine ca.: 4,2 t dimensions of the machine ca.: 2,8 x 1,8 x 2,2 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Transnorm belt conveyor hinged belt diverter 3000x1120x1000 RA2286 Technical data: Conveyor length (NL): 3000 mm Belt body (NB): 1120 mm Belt width (GuB): 1000 mm Overall height/transfer height (BH): 1050 mm +100 mm adjustment range Minimum transfer height: 500 mm Maximum transfer height: 1600 mm Basic dimensions: 3000x1300 mm Tilt height difference: 1100 mm Conveying speed (v m/s): 1.5 m/s Lifting/lowering speed: 1.8 s /1.2 s Drive: Nord geared motor Electrical data: Conveyor belt motor: 50Hz V380-500, kW 1.5 / S1 Tilting motor: 50Hz V220/400, kW 3.0 / S1 Idler pulley (UR): Ø = 80/120 mm Drive drum (AT): Ø = 82 mm Year of construction: 2020 Optionally available: Frequency converter for stepless speed control Prices net plus ex central warehouse Dr. Sonntag GmbH & Co KG, 97076 Würzburg Features: Construction year: 2020 condition: new Conveying length in mm: 3000 Nominal / outside w ...
Key data: 1200 KW, 1788 kVA, 660 V
Caterpillar CG170-v12 0-hours after overhauling! New:ALL liners, piston rings, bearings, gaskets, filters, ect. total running hours engine: 31.000 1200kw 1800kva year 2013 all documents scope: genset on frame control panel breaker panel Gasline pomps transformer
Nominal pressing force ... 250t Table dimensions... 1120 x 800mm Slab dimensions ... 800 x 475mm Plunger adjustment ... 110mm L x W x H ... 1350 x 2550 x 2915mm Machine weight ... 13000kg Number of strokes ... 45/min Control Siemens The machine is in good condition, possible to test under power.
Manufacturer: FORMAT-4 Model: Kappa V60 Type of Machine : vertical panel saw Condition: Used. In operation for approx. 6 months Max cutting length: 4200 mm Max cutting height: 2200 mm Max horizontal cut height: 2080 mm Max cutting depth: 60 mm Motor power: 4 kW Saw blade diameter: 250 mm Speed: 5300 rpm Weight: 910 kg Installation dimensions (LxWxH): 5600 x 1700 x 3000 mm Find more here - / Contact us at -
An ACG Nowo (ACG Kinna Automatic) pillow machine for processing cotton and for filling in textiles for pillow production is available. Documentation available. On-site inspection is possible.
CNC Machining Center Universal Manufacturer: AXA Type: VPC 40 U Year of Make: 2003 CNC control: Heidenhain TNC 430 Travels: X/Y/Z = 2,300 x 1,200 x 600 mm NC rotary table dimensions: 1,100 x 1,100 mm Fixed table dimensions: 1,100 x 1,100 mm Tool holder: SK40 Tool magazine: 60-fold Speed: 10,000 rpm Weight: approx. 20 tons.
Standart Lackierkabine L6000 Premium Innenmaße (mm) ▪ Länge: 6000 ▪ Breite: 4000 ▪ Höhe: 2650 Außenmaße (mm) ▪ Länge: 6200 ▪ Breite: 4080 ▪ Höhe: 3400 Aufbau: 2 seitliche Kanäle Absaugung 5 Absauggitter am Boden für eine optimale Absaugung Beleuchtung 4 LED-Neonröhren – leistungsstarke und gleichmäßige Beleuchtung ⚙ „Easy Start”-System Vereinfachte Inbetriebnahme – schnell betriebsbereit
Lackierkabine Premium L7000 Innenmaße (mm) ▪ Länge: 7000 ▪ Breite: 4000 ▪ Höhe: 3700 Außenmaße (mm) ▪ Länge: 7200 ▪ Breite: 4100 ▪ Höhe: 3700 ▪ Struktur: 2 seitliche Kanäle Absaugung 5 Absauggitter am Boden für eine optimale Absaugung Beleuchtung 4 LED-Neonröhren – Leistungsstarke und gleichmäßige Beleuchtung ⚙ „Easy Start”-System Vereinfachte Inbetriebnahme – schnell betriebsbereit
Printing technology: piezoelectric inkjet printing, print resolution X/Y: 1440dpi/1440dpi, print area X/Y: 615mm/415mm, machine dimensions X/Y/Z: approx. 1300mm/800mm/500mm, weight: approx. 80kg. The print heads as well as the ink and cleaning hoses must be repaired. Includes software CD and several printing plates/formats. Documentation available. An on-site inspection is possible.
Vierbruchfalzwerk Schwertfalzwerk / Mobil Knife Folding Unit Heidelberg VFZ-52.D Four-directional folding unit - Vierbruchfalzwerk Baujahr / Year 2001- Serial-No. 703796-297059 Format / Sheet Size min. 120 x 100mm Format / Sheet Size min. 520 x 360mm Geschwindigkeit / Speed 25 - 160 m/min Taktzahl / Cycle rate max. 30.000(T/h) Einlaufhöhe / Infeed height 51,5 – 91,5cm Schwertposition / Knife position 180° schwenkbar / 180° pivotable zum Anschluss an Maschinen mit DCT Steuerung / to connect on machines with DCT Control
Adresseriermaschine - Addressing Machines VARIADRESS - CMC KR 2 II - 01 Year 1992 - Serial-No. CMC KR 2 II -01
Center height: 280mm, center width: 2000mm, turning length: 2000mm, turning diameter over bed/face slide: 570mm/340mm, spindle bore: 63mm, speed: 2500rpm, quill stroke: 160mm, quill diameter: 70mm, power requirement: 15kW. Machine dimensions X/Y/Z: approx. 3850mm/1850mm/1750mm, weight: approx. 3500kg. On-site inspection is possible.
used
Number:: 012005057812 control: Siemens Sinumerik 840 Tool changer: 24-fach Axles: 3 Miscellaneous:: mit Späneaustrag Miscellaneous:: CPU ist defekt The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
used
Number:: 941264 control: Fadal CNC 88 HS Tool changer: 21-fach Axles: 3 Miscellaneous:: mit Späneaustrag The tech. Data are manufacturer or operator information and therefore non-binding. We reserve the right to prior sale, Our terms and conditions of sale apply exclusively. About us More than 400 of our own machines in stock Over 15,000 m² of storage space, 70 t crane capacity More than 10,000 items and accessories for your workshop If you are interested in selling machines, production lines, or your business, please contact us. You can find further offers on our website. Tours are possible by appointment. We look forward to your visit. Your Markus Hirsch Team The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Stock# U2457-3 Used stainless steel horizontal screw conveyer by Van Beek BV (NL) type "U", model TR300. Width of the gutter 315 mm. Screw has diameter 300 mm, lead of the screw 270 mm, total length of the screw 290 cm. Conveyer has two inlets, each with diameter 298 mm and rotary magnetic separator by Goudsmit Magnetic Systems (NL). Each separator is driven by el motor and reducer 0.18 kW, 1320/21 rpm, 220-240/380-415 V, 50 Hz. Spacing between center axis of each inlet is 145 cm. Conveyer has also two rectangular discharge outlets, each with dimensions: 240 mm x 250 mm. Spacing between centers of discharge outlets - 250 cm. Screw is driven via reducer and el motor 2.2 kW, 220-240/380-415 V, 50 Hz. Working rotation of screw up to 64 rpm. Last time machine had been working in food industry as a collector of powdered products from two vibrating screens.
Size: 500 x 350 mm Equipments: Horizon Stacker Receiving Tray with Right-Side Delivery, ST-20R air suction collator VAC-100a Technology: touch & work model: air-suction collator bins: 10 each collator error avoidance: misfeed-,doublefeed- and jamming control saveable jobs: 9 memories for repeat orders extensibility: up to 6 collators (60 bins) stack opportunities: flat or laterally shift
Stock# U2459 Used dissolver by Drais (DE) model RN 3-45 AS VAC. Contact parts designed in carbon steel. Machine is designed for work on vacuum. Mixer has single shaft with working length 105 cm and toothed disc with diameter 690 mm. Shaft is driven by el motor 45 kW, 1460 rpm, 400/690 V, 50 Hz. Working rotation of shaft up to 600 rpm. Mixer has also side wall scrapper, driven by el motor 1.5 kW, 1410 rpm, 440 V, 50 Hz and gearbox. Working rotation of scrapper up to 26 rpm. Machine has top cover and mixing pan with total volume 2000 l. Mixing pan has internal diameter 1465 mm x length of straight side of wall 1160 mm. Mixing pan has two side wall discharge outlets with valves, and bottom supports for work with forklift. Dissolver is rised/lowered hydraulically. Rise up to 145 cm. Hydraulic pack is driven by el. motor 1.5 kW, 1420 rpm, 230/400 V, 50 Hz. Mixer is equipped with vacuum pum ...
Venti Oelde High Performance Centrifugal Fan Manufacturer: Venti Oelde Type: HRV 45-224 / R GL 360 Type: High Performance Centrifugal Fan V: 2559 m³/h 12 bar t: 300 C P: 0.608 kg/m³ Pw: 0.9 kW NV: 2840 1/min Weight: 180 kg Year of Make: 2017 More items - new and used - can be found in our shop! International shipping costs on request!
Stock# U2461 Used stainless steel planetary mixer by Grieser (DE) model VPL 350. Mixer has two spiral agitators and one side wall scrapper. Agitators are belt driven by el motor 15 kW, 1460 rpm, 400 V, 50 Hz and planetary gearbox. Rising and lowering of agitators by hydraulic device. Mixer is equipped with 9 mobile stainless steel mixing pans. Each pan has internal diameter 695 mm x 500 mm depth, total volume 365 l, working about 350 l. Two mixing pans have bottom outlets with manually operated valves. There is also included mechanical rising and tilting device for discharging pans. Mixer has local control panel and el. cabinet. Technical documentation - general manual and el. schemes available in digital form. Machine currently dismantled. Last time used in food production.
Engel victory 200/50 spex (2010) CC200 Clamping force: 50 t Screw diameter: 35 mm Type: Horizontal Drive: Hydraulic Hours: 56000
Manufacturer: Cummins Type: VTA1710 G1 12-cylinder V12 engine 622 hp 400V 50Hz Twin turbocharger Year of manufacture: 1984 Hours: 7567 The engine is soundproofed, but is also available without a container upon request. A video of the engine running available. Complete with control panel and diesel tank.
maximum number of results exceeded
please refine your search
