negri bossi v used for sale

Manufacturer: FOCO Umlaufregal, Type: Umlaufregal vertikal, Year: 1992, FREETEXT1: Be-/Entsladen möglich per Hand/Gabelstapler/kran, FREETEXT2: Aufstellmass<CRLF>LBH =9800 X 5500 X 1780 mm, FREETEXT3: 15 Gondeln, FREETEXT4: Gondel Innenmasse <CRLF>LBH =4200 X 620 X 550, FREETEXT5: Tragktaft je Gondel 1500 Kg, FREETEXT6: Antrieb SEW 2 X 3 kw, Year :1992

Manufacturer: Venyeskop, Year: ca.1993, Outer radius mm: 6500, Innenradius mm: 1750, Stangentransport mm: 120, Working lenght min mm: 7000, Working hight mm: 950, Feeding speed max m/min: regelbar, Engine power kW: 2 X 0,75, Wight approx. kg: 1500, Year :ca.1993

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Lenze Vector 8200 3 kw, Type: 8200 Vector, Serial number: 004422991, Systemconfiguration: 45386151, Hz: 0-65, Serial number: 004422991,

Manufacturer: Venyeskob Bandpalettentrockner 5500/24, Type: Ven Dry Vertcal Bandpalettentrockner 5500/24/2-Zonen, Year: 2020, Control: Venyeskob, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 400-5500, Min.-max. workpiece height in mm: 110, Working widht max mm: 1300, Number of pallets: 24, Palettenausmass LxBxH mm: 6100 X 1500, Lichte weite Paletten: 200, Tragfähigkeit Palette kg: 250, Palettenausmass LxBxH mm: 6100 X 1500, Heizmedium Warwasser: yes, Year :2020

Manufacturer: Venyeskob, Control: no, Working length mm: 800, Working widht mm: 1400, Total hight mm: 900 verstellbar, Engine power kW: ca.1 kw, Feeding speed min-max m/min: ca.6-20, Feeding speed continous adjustable: yes,

Manufacturer: Esta Ventilator, Year: 2006, Diameter intake mm: 150, Engine power kW: 1,1 Kw, rotations rpm: 2800, Direkt drive: yes, Year :2006

Manufacturer: Venyeskob Bürstenschleifmaschine, Type: VBS 1300, Year: 1999, Monting of the machine: 3 Bürstenaggregate<CRLF>1 Enststaubung, Number of units: 4, Working widht mm: 1300, Through running hight max mm: 100, Diameter of brushes: 350, Number of rotations controlled: yes, Units mounted upright: yes, Through running hight max mm: 100, kW output motor: 4,0, Vacuum belt: yes, Feeding speed continous adjustable: 1,5-7,5, Dust removal brush: yes, Weight approx. kg: 2500, FREE TEXT: mit Flextrim Bürsten, Year :1999

Type: VLT 5000,

Manufacturer: Weinig, Type: Kettenförderssysteme Vereinzelung, Working length mm: 6500 mm, Working widht mm: 2600 mm, Own controller: no, Engine power kW: ca 5, Working hight adjustable mm: 900 mm, FREE TEXT: 5 Mitnehmer Ketten mit 170 mm Abstand,

Manufacturer: Böhl Folienstrechmschine, Type: Verpackungsanlage, Year: 1999, Superordinate control: yes, Cycle performance units/min: 6, Packing system for: Unterschränke und Hänger, Stretch-film packing: yes, Packing stations: 2, Carton packing: no, Work piece width min-max mm: 800 X 800/900 X 900, Min.-max. workpiece length in mm: 400 X 1200, Min.-max. workpiece height in mm: max 900, Pre-assembly belt: yes, Angle transfers: 2, Absetzstation: 1, Einschleussstation: 2, Packing belts: 4, Year :1999

Manufacturer: Venyeskob 2 Stück 90 Grad, Type: Transportbandkurve, Year: ca, Inner radius in mm: ca.4500, Working hight mm: 890, Feeding speed max m/min: 6-30, Engine power kW: ca 2 X 1,5, FREE TEXT: eine Kurve ist überbaut, Year :ca

Manufacturer: Venyeskob, Type: VBV, Year: ca. 1990, Purpose: Beizvertreiber, Anzahl Bürsten: 2, Brushes inclinedt: yes, Working hight mm: 120, Durchmesser Bürsten: 150, Power per brush kW: 0.75, Working width mm: 1350, Noise enclosure: yes, Compressed air: 6, Year :ca. 1990

Manufacturer: Delle Vedove, Type: Profilleistenschleifmaschine, Monting of the machine: 8 Schleifaggregate, Program: yes, Axis control: yes, Work piece width min-max mm: 10-250, Min.-max. workpiece height in mm: 6-80, Work piece length min-max mm: 300, Sanding width mm: 2500, Sanding hight mm: 80, Schleifaggregate links : 3, Schleifaggregate rechts : 3, Transverse sanding units: no, Surface sanding units: 2, Profile sanding units: 6, Monting of the machine: 8 Schleifaggregate,

Manufacturer: Venyeskob, Type: Transportband, Year: 2014, Working length mm: 13000, Working widht mm: 1350, Total hight mm: 920, Engine power kW: 0,75, Feeding speed max m/min: 3-8, Feeding speed continous adjustable: yes, Belt control: yes, Working hight adjustable mm: yes, Year :2014

Manufacturer: VTS Ventus, Type: VS-40-L-FV, Volume flow rate m³/h: 5000, Number of fans: 1, Total power kW: 1,5, Required space L x W x H mm: 1124x1168x670,

Manufacturer: Viet, Type: Challenge 223-TM, Year: 2001, Monting of the machine: Langs/Schuh, Sanding width mm: 1350, Sanding hight mm: 3-160, Rubber roller: 1, Shore roller 1: 60, Belt 2 shoe unit: yes, Weight in kg: 3350, Year :2001

Manufacturer: Venyeskob Bürstenaufsatz, Year: ca.1990, Number of units: 2, Through running hight max mm: 120, Diameter of brushes: ca.300, Number of rotations controlled: yes, Units mounted inclined: yes, Fast exchange device: yes, Through running hight max mm: 120, Axle-diameter: ca.30, kW output motor: ca.0,75, Dust removal brush: Beizstation, Year :ca.1990

Manufacturer: Pfeiffer Verladetraverse, FREETEXT1: 12 Tonnen, FREETEXT2: verstelltraverse, FREETEXT3: Länge 5000, FREETEXT4: 12 Nutzlast, FREETEXT5: 7 verstellpunkte<CRLF>je Seite,

Manufacturer: Biesse, Type: Skipper V31, Year: 2016, Software: Biesse Works, Work piece width min-max mm: 70-900, Work piece length min-max mm: 200-2500 (3200), Work piece thickness min-max mm: 10-70, Working range X: 2500, Working range Y-axis: 900, Number of milling spindles: 1, Power kW 1: 4,5, RPM min-max 1: 18.000, Vertical drills-X: 5, Drill vertical Y: 5, Horizontal drills-X: 4, Drill horizontal Y: 2, Sawing unit: yes, Number of drill spindles: 10+6, Lochraster: 32, Drilling engine kW: 10, Year :2016

Manufacturer: Biesse, Type: 24 Volt Steuerspannungversorgungsmodul, Model: CNI, Serial number: AL SW 70, Systemconfiguration: Elemc Tar.8-14,5 V,

Manufacturer: Reichenbacher, Type: Vision 2 Sprint, Year: 1999, Control: Simumerik 840 D, Working range X: 6140, Working range Y-axis: 1600, Working range Z: 480, Feeding speed max m/min: 60, Pendulum processing: yes, Number of milling spindles: 4, Milling engine 1 hours power: 4,8, 2 station allocation: yes, 4 station allocation: yes, Vacuum pumps m³/h: 160, Year :1999

Manufacturer: Cefla, Type: VV2000M1, Year: 2006, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 340, Min.-max. workpiece height in mm: 3 - 80, Working widht max mm: 1300, Number of lamps: 1, kW power 1 lamp: 15, kW power all lamps: 19,9, Lampen gerade eingebaut: 1, Adjustable: stufenlos, Heating battery: Kühlung hinter der UV Lampe, Year :2006

Manufacturer: Yale, Type: GLP30VX V2395, Year: 2010, Fork length in mm: 1200, Lifting power kg: 3000, Lifting hight approx. mm: 3505, Total power kW: 38, Wight approx. kg: 4250, Year :2010

Manufacturer: Rippert, Type: IR Vorwärmodul, Year: 2005, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 10-80, Working widht max mm: 1300, Number of lamps: 6, Position of lamps: gerade, Power per lamp: ca.3, od distance mm: ca.80, Feeding speed m/min: 3-15, FREE TEXT: Lampen müssen erneuert werden, Year :2005

Manufacturer: Viet, Type: Valleria Challenge 333TM, Year: 2000, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Year :2000

Manufacturer: Venyeskob, Type: Düsentrockner, Year: 11.97, Work piece width min-max mm: 1300, Min.-max. workpiece length in mm: 150, Length mm: ca 13.000, Revisionsklappen: yes, Gehäuse Wärmeisoliert mm: yes, Kanaltemperatur Grad: ca.60, Abluftventilator kW: ca.5, Ex geschützt: yes, Gesamthöhe mm : 2800, Temperature regulation: yes, Min.-max. workpiece height in mm: 3-80, Feedin speed m/min: 6-30, Belt conveyor: yes, Max. air temperature: 60, Heated by: Warmwasser, Damper register - items: 1, 1st Damper register kW: ca.80, Year :11.97

Manufacturer: Venyeskob, Type: Gummitransportband, Year: 1997, Working length mm: 2500, Working widht mm: 1510, UV-Band: 920, Total hight mm: 0,75, UV conveyor belt: 25, Bandkühlung: 10, Frequency converter: yes, Own controller: yes, Bandsteuerung : yes, Belt 7 length width mm: yes, Belt 14 length width mm: mit Anschlaglineal für Vereinzelung der Teile/Motorisch verstellbar, Year :1997

Manufacturer: Viet, Type: Valeria Challenge 223 TM, Year: 2000, Monting of the machine: Längs/Längs, Sanding width mm: 1350, Sanding hight mm: 3-160, Continous adjustable feeding speed m/min: 6-20, Vacuum table: yes, Weight in kg: 3450, Year :2000

Manufacturer: VEN DRY COLLECT 10-ETAGEN TROCKNER, Year: 2014, Work piece width min-max mm: 1.300, Min.-max. workpiece length in mm: 4.700, Min.-max. workpiece height in mm: 150, Number of pallets: 10, Working widht mm: 1.300, Conveyor lenght mm: 10 X 4.700, Feedin speed m/min: 3 - 15, Conveyor/Conveyor belt: Band, Heating register qty: 1, Fresh air m³/h: 2.500, Damper register - items: 1, Fresh air m³/h: 2.500, FREE TEXT: Temperatur 15-50 Grad inkl.Heizregister, Year :2014

Manufacturer: 2 Stück Abluftventilatoren, Type: waren verbaut Sritzmaschine, Year: ca.2005, Diameter intake mm: 400, Engine power kW: 2,5/1720 , rotations rpm: 1720, Direkt drive: yes, Suction side mm: 400, Outlet side mm: 400 X 1000, Year :ca.2005

Manufacturer: Venyeskob, Type: Schrägrollengang, Year: 1995, Total metres approx.: 6,5, Working widht mm: 1300, Working widht mm: 1300, Year :1995

Manufacturer: Venyeskob, Type: Zentrierrollengang, Year: 1995, Total metres approx.: 5, Working widht mm: 1300, Total hight mm: ca 980, Working widht mm: 1300, Year :1995

Manufacturer: Venyeskob, Type: Zentrierrollgang, Year: 1995, Total metres approx.: 5, Working widht mm: ca 1300, Total hight mm: ca 980, Adjustable: yes, Schräggestellte Rollen: yes, Stop straightedge: yes, Working widht mm: ca 1300, Year :1995

Manufacturer: Venyeskob, Type: Gurtbandkurve, Year: 1995, Outer radius mm: ca 4000, Inner radius in mm: ca 2500, Outer diameter mm: ca 8000, Belt transport: yes, Working hight mm: ca 980, Year :1995

Manufacturer: Venyeskob , Type: Gurtband Typ H, Year: 1995, Working length mm: 6000, Working widht mm: 1300, Total hight mm: ca 980, Feeding speed continous adjustable: yes, Year :1995

Manufacturer: Venyeskob, Type: Rollgang, Driven: no, Length-width mm: ca.1000 X 1400 X 920 verstellbar, Length mm: ca 1000, Working widht mm: 1400, Adjustable: yes, Roller pitch mm: ca .140, roller diameter: 60, 1 Stückzahl : 1, FREE TEXT: Fahrbar auf Rolle/Maschine wird gereinigt und Lackiert,

Manufacturer: Venyeskob, Type: Rollbahn nicht angetrieben, Length-width mm: 980 X 1400 X 920, FREE TEXT: Maschine wird gereinigt und Lackiert,

Manufacturer: VICKERS RTE<CRLF>T1M6030, Type: DBC20618, Model: DBC20618, Serial number: 2976, Systemconfiguration: TAM 6030,

Manufacturer: Opti-line Umrichter, Type: V2500-0150TFW1,

Manufacturer: Valtorta, Type: VF/PF3, Year: ca 1992, Work piece width min-max mm: 1300, Min.-max. workpiece height in mm: 3 - 100, Working height: 900, UV-laquer roller: yes, Widht of roller coater: 1360, Year :ca 1992

Manufacturer: Bürkle Vertreibetstationen, Type: VBS, Work piece width min-max mm: 400, Number of brushes: 2, Brushes straight: yes, Working hight mm: 10-200, Power per brush kW: 0,5, rotations controlled: regelbar, Feeding speed min-max m/min: ca.8-15, Vaccum conveyor belt: no, FREE TEXT: Bürstenträger sind nicht dabei/Transportbandlänge 1600 mm,

Manufacturer: Viet Lackschleifmaschine, Type: Valeria, Year: 1996, Control: Viett, Monting of the machine: Walze, Sanding width mm: 1300, Sanding hight mm: 6-120, Number of sanding belts: 1, Sanding belt dimensions: 3250 X 1350, Rollers: 1, Shore roller 1: 30, Band 1 Schleifbandgeschwindigkeit m/s : ca.5-18, Continous adjustable feeding speed m/min: yes, Transportbandantrieb kW: ca.3, Intermediate sanding of lacquer: yes, Constant table hight: yes, Vacuum table: yes, Brushing unit: yes, Werkstück-Abstrahleinrichtung: yes, Year :1996

Manufacturer: Venti Oelde, Type: EC 35-2-AS, Year: 1992, Filter system - positive pressure: yes, Volume flow rate m³/h: 7500, Filter surface in m²: 70, Filter hoses: Polyestergewebe, Qty. filter hoses: 40, Electronic control board: 1, Suction pipe diameter 1 mm: 15, FREE TEXT: inkl. Schaltschrank, Year :1992

Manufacturer: Dete Vorwärmgerät für Lack, Type: 32Ex 1 R, Year: 2000, FREETEXT2: 3,5 Kw, FREETEXT3: Ex geschütz, FREETEXT4: Regelbar Temperatur, Year :2000

Manufacturer: Venyeskob, Year: 1985, Working length mm: 5000, Working widht mm: 1300, Total hight mm: +/- 950, Feeding speed continous adjustable: yes, Year :1985

Manufacturer: HBB Eckverbinderpresse, Type: Velox, Year: unbekannt, FREETEXT1: Heftmaschine für Rahmen, Work piece width min-max mm: 4-120, Min.-max. workpiece height in mm: 5-70, Wight approx. kg: 75, FREE TEXT: Abmessungen in mm: 680x900x1250, 120 NI/Min, Durchsatz pro Stunde: 150-200 Rahmen ( je nach Rahmenart und Grösse) , Year :unbekannt

Manufacturer: Boge, Type: VLEA 7,5 R-7, Year: 1990, Schraubenkompressor: yes, Operating hours: 4899, Running idle houres: 1434, Revolutions of main rotor U/min: 4480, Drive power kW: 7,5, Volume flow rate m³/h: 1,05, Max. Betriebsdruck : 8, Year :1990

Manufacturer: Venyeskob, Type: Transportband, Year: ca.1995, Working length mm: ca.7500, Total hight mm: 950 +-, Engine power kW: 1,5, Feeding speed max m/min: 2-5, Feeding speed continous adjustable: yes, Working hight adjustable mm: yes, FREE TEXT: überbaut und verschiebbar, Year :ca.1995

Manufacturer: Vickers hydraulikeinheit, Year: ca1990, FREETEXT1: mit Steuerblock, FREETEXT2: Vorratsbehälter 180 Liter, FREETEXT3: Pumpe, FREETEXT4: Kühler, FREETEXT5: die Maschine dazu wurde verschrottet, FREETEXT6: Motorleistung ca.4 kw, Year :ca1990