133,957 used machines on RESALE, but how to find them? Machine Search
Table milling machine with extended tables
Type: Backsaver ST Serial number: 200961-3 Year of construction: 2020 Tipping height: 980 mm Tipping angle: 0 - 90° Working load: max 900 kg Container: 1000 x 1200 x 800 mm Power: 1Ph, 230VAC, 50Hz DImensions: 1450 x 1350 x 1150 mm Weight: 300 kg With rechargable battery and CTEK MXS 7.0 charger
The machine is in good technical condition, testing is possible by prior arrangement.
The machine is in good technical condition, after prior agreement it is possible to test it. Supported systems MAX4 with WinMax v8 Control language completely in Czech 3D simulation yes Programming type Dialog and NC TABLE Table dimensions 1,500 x 660 mm T-slots 6 x 18 mm Max. table load 1,350 Kg Distance between spindle face and table 150 - 760 mm TRAVELS X axis 1,270 mm Y axis 660 mm Z axis 610 mm A axis 360 SPINDLE Max. spindle speed 12,000 rpm Spindle power 18 kW Torque 237 Nm Spindle taper SK 40 TOOL MAGAZINE Number of tools 40 Max. tool diameter 75 / 125 mm Max. tool weight 7 kg FEED Rapid feed X/Y/Z 30 / 30 / 20 m/min Working feed X/Y/Z 15 m/min OTHER MACHINE DATA Dimensions W x D x H 3,250 x 2,220 x 2,950 mm Weight 9,400 Kg
Offer 25481 Technical data: - Saw blade diameter up to 350 mm - Saw blade feed via hand lever - Largest opening width of the pneumatic vise 205 mm - Cutting range - at saw blade diameter 350 mm - at 90° around 120 mm - Square 110 mm - Flat up to 200 x 90 mm - or 140 x 110 mm - at 45° about 100 mm - flat 100 x 100 mm - Mitre adjustable - left up to 45° - right up to 45° - 30° - 2 saw blade speeds 17 + 34 1/min - Drive 400 V / 1.4 / 1.9 kW - Air connection 6 - 8 bar - Micro spray coolant device - Space requirement approx. W 850 x H 1750 x D 950 mm - Weight approx. 400 kg
Used automatic sausage portioning and twisting (joining) machine, Vemag type LPG 208. New: 2011. Automatic sausage portioning and twisting (joining) machine, used in meat processing, which precisely twists sausages of various calibres to specific lengths, working with natural, collagen and cellulose casings, achieving very high performance (even over 2000 portions per minute). 400/460 V, 3 Ph, 50/60 Hz, 9 A, 6 kW. Dimensions: 1500 mm x 850 mm x 1300 mm.
Dough Portioner / Dough Divider VEMAG, Type: VDD 807 with ProcessChecker - Gentle division of wheat-based doughs - High performance - No lubrication required - Serving weight: 100 – 2,000 g adjustable in 1 g increments - Nozzle diameter: 40 – 90 mm in 10 mm increments - Including funnel - Including dough belt feeder / riser belt - Including VEMAG ProcessCheck checkweigher, year of manufacture: 2012 Viewing and test run are possible by arrangement.
Milling machine Micron VCP 800 Heidenhain TNC 426 Year of manufacture 1999 Table size 1050 x 590 X 800 / Y 450 / Z 450 Maximum speed 20,000 RPM Maximum table load 400 kg Machine weight 6,500 kg Machine size 3,200 x 3,200 x 2,800 mm Spindle holder: HSK-63A Magazine slots: 30 Tool changers, all places have been renewed and adjusted. X-axis spindle replaced Without tools and vices
Horizontal intermittent motion bagger for forming, filling and sealing duplex sachets. Mini maxi sachets: Width: 45 to 65 mm Height: 50 to 130 mm Capacity: 1.5 to 15 cm3 Volpak screw feeder: Type: DS-303 Year: 1997 Dosage volume: 1.5 to 15 cm3 Formats sold with the machine: 8 screws size 0 + 9 dosage cones 2 screws size 00 + 3 dosage cones 2 screws size 2 + 2 dosage cones 3 models of filling wand., formats: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Cadence: 45 to 110 strokes per minute , Elec:: 380 V / 50 Hz / 9 A , Mini Maxi: Width: from 45 to 65 mm / Height: from 50 to 130 mm / Capacity: from 1.5 to 15 cm3 , Type: DS-303
General SKU215X086 MakeVMI Agitator LocationBarneveld CEcheck TypeDALLE HYD T 110 DE Main Features MaterialStainless steel Motor1.5 KW Length1375 mm Specified Features - Stirrer Stirrercheck Paddle stirrercheck Shaft length1375 mm Sizes stirring headø 175 x 30 mm Motor1,5 kW 400 Volt With variable speed drivecheck Speed mixing shaft142 — 1420 — 2471 rpm MaterialStainless steel 1.4301 (304) Information No.167386 Year of construction2012 Floorspace1,3 x 1,4 m Total height2,2 m Weight400 kgStirrersVMI AgitatorMixers > StirrersBrand > VMI Agitator What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Milling machine Hurco VMX24 • Travel (X/Y/Z): 610 mm / 510 mm / 610 mm. • Table size: Approx. 760 x 510 mm. • Tool holder: SK40. • Tool changer: 24 places (side-mounted). • Spindle speed: Up to 12,000 rpm • Rapid traverse: Approx. 30-35 m/min (X/Y/Z). • Control: Hurco WinMax 6 1 shift operation May 2018 new spindle from 15,000 to 12,000 Replacement Monitor 30 cm Torisan TM121SV-02L01 LCD TFT available (subject to functionality) without tools and vices Perforated plate included
The VISCOTHERM Hydraulic Power Unit B/C 11–22 Z/HP is a powerful, robust pump unit for the reliable supply of the ROTODIFF hydraulic motor in decanter centrifuges. With an 11 kW electric motor, a gear pump (22 l/min at 270 bar) and integrated proportional control, it enables infinitely variable adjustment of the screw speed during operation. The 85-litre tank, an efficient oil/water cooler and extensive monitoring and protection components ensure safe and long-lasting operation – even under demanding industrial conditions.
A complete low-pressure steam boiler system Viessmann is available. 1) Condensate unit Viessmann TWA-T LS 0,9, max. operating pressure: 0.1bar, test pressure: 0.2bar, max. temperature: 110°C, water volume: 400l. 2) Dosing system Schweizer-Chemie EMP 2.5l E60. 3) Steam generator Viessmann Vitoplex 100-LS, year of manufacture: 2019, nominal heat output: 460kW, steam capacity: 700kg/h, water volume: 960l, operating pressure: 1bar, test pressure: 4.8bar. 4) Control cabinet Viessmann Vitocontrol HS. 5) Steam accumulator/pressure vessel Viessmann RBS/1 1000 So. steam, volume shell space/tube space: 990l/17l, max. operating overpressure shell space/tube space: 10bar/2.5bar, max. operating temperature shell space/tube space: 95°C/130°C, test pressure shell space/tube space: 13bar/4bar. Documentation available. An on-site inspection is possible.
Key data: 275 KW, 380 kVA, 400 V
Deutz MWM Gas-CHP TBG 234 V12 Gas Electricity and Heat Generator from 1990, AC Generator from 2019 with unknown operating hours. 252 KWel x 1,500 rpm, 400 V/50 Hz. AC Generator: Leroy Somer LSA 47.2S5 C 6/4, 380 KVA Deutz MWM TBG 234 V12 Manufacturer: Deutz MWM Model: TBG 234 V12 Type: Gas Engine Serial number: 234.12.02457 Power [KW]: 275 Year of Make: 1990 Operating hours: unknown Weight [kg]: 5,000 Dimensions LxWxH [cm]: 3.6 x 1.75 x 2.6 AC Generator Leroy Somer LSA 47.2S5 C 6/4 Manufacturer: Leroy Somer Model: LSA 47.2S5 C 6/4 Type: AC Synchronous Generator Serial Number: 36572000001 Power [KVA]: 380 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 548 Speed [1/min]: 1,500 Year of Make: 2019 Weight [kg]: 1.126
Key data: 360 KW, 600 kVA, 400 V
Deutz MWM Gas-CHP TBG 616 V12 Gas electricity and heat generator from 2002 with unknown operating hours, with control. 360 KWel x 1,500 rpm, 400 V/50 Hz. AC generator: Stamford HC I 534 E2, 600 KVA Manufacturer: Deutz MWM Model: TBG 616 V12 Type: Gas Engine Serial Number: 2203625 Power [KW]: 360 Year of Make: 2002 Operating hours: unknown Weight [kg]: 5,000 Dimensions LxWxH [m]: 3.5 x 1.25 x 2.2 AC Generator Stamford HC I 534 E2 Manufacturer: Stamford Model: HC I 534 E2 Type: AC Synchronous Generator Serial number: 02324690 Power [KVA]: 600 Voltage [V]: 400 Frequency [Hz]: 50 Current [A]: 866 Speed [1/min]: 1,500 Year of Make: 2002 Weight [kg]: 1.625
Center height: 180mm, swing diameter over bed/cross slide: 360mm/190mm, distance between centers: 750mm, speed: 1250rpm, machine dimensions X/Y/Z: approx. 2800mm/1000mm/1300mm, weight: approx. 1750kg. An on-site inspection is possible.
For sale is an A100 Vertical Form Fill Seal (VFFS) Packaging Machine, complete with: Inclined Infeed Conveyor (for product loading) Outfeed Conveyor (for efficient bag discharge and handling) This is a turnkey automated packing line suitable for a wide range of food and non-food applications. Features: A100 VFFS machine – fully automatic, forms, fills, and seals bags. Inclined infeed conveyor – ensures consistent and efficient product feeding. Outfeed conveyor – transports finished bags away from the sealing area. Stainless steel construction – hygienic and easy to clean, ideal for food production. Compact footprint – space-saving design. Control panel with emergency stop – user-friendly operation. Condition: Machine is in excellent condition and has been used only sparingly. Well maintained, clean, and ready for immedi ...
GROTE 613-VS2 SLICER WITH 18 PRODUCT HOLDERS (MOST NEVER BEEN USED) AND EXTRA REPLACEMENT PARTS-> 2 PULLYS, PUMP, SEAL, BEARING, BLADE, PULLY HUB ALONG WITH A BOX OF 25 ACCUBAND BLADES. THIS SLICER SHOWS LIKE NEW
Late model Hobart commercial meat saw. Model 6801, serial number 31-1464-941, 200/230volts and 3 phases. Tested. Comes with one 142" blade. Unit has normal wear of used equipment, will require some extra cleaning.
General SKU356W957 MakeAmandus Kahl TypeVWR251 No.10880 Year of construction1991 LocationBarneveld Specified Features - Roll breaker MaterialMild steel Roll breakercheck Double shaftcheck Roll sizesDia. 250x1000 Fluted rollscheck Inlet1220x130 mm Outlet1300x530 mm Motor37kW, 380/660V, 975 rpm Roll speed±350 rpm Feeding by vibro feedercheck Information Floorspace2,5x1,0 m Total height1,8 m Weight3140 kgRoll breakersAmandus Kahl HamburgBreakers > Roll breakersBrand > Amandus Kahl Hamburg What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
Brand: Videojet Type: Inkt Jet Marking Machine Model: Excel 2000
11700L Square Vessel - Atmospheric Vertical stainless steel tank 11700L Gross Volume Manufacture: Moeschle Behalterbau GmbH Height Approx 2700mm Width Approx 2500mm Depth Approx 2550mm Double Walled Insulated Stainless Steel Clad sides Cooling Jackets 2" RJT Bottom Outlet Smaple Point 1.5" External Down Pipe Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
Kettle (12,000 litre vessel) Manufactured By Moeschle estimated 50BBL working capacity Vertical cylindrical Stainless steel (316) vessel OD 2400mm ID 2200mm Overall height APPROX 5250mm 2” RJT Bottom outlet Top and Side entry man way door External Steam heating Jackets on tank shell Insulated 150mm thick with stainless steel cladding over Year of Manufacture: 2001 Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
grinding diameter: 350 mm grinding length: 1000 mm centre height: 175 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m Teilüberholte Maschine mit Messprotokoll nach Neumaschinentoleranz NEUE Steuerung Eckelmann ENC mit BEMA Schleifsoftware KEL-ASSIST für Kelco 90 numerisch gesteuerte B-Achse Innnschleifrinrichtung Dia 80mm Schleifscheibe links Durchmesser 400mm Schleifscheibe rechts Durchmesser 300mm Innenschleifspindel HJN 828 hydraulischer Reitstock Mikroverstellung KEL SET Messsystem The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Rational VCC 211 400V, 28 kW, 50 A, 100 litre capacity, incl. 2 pasta baskets à 30x51x18 cm, core temperature sensor with 6 measuring points, at least 350 programmable cooking processes with up to 12 steps, including hand shower with automatic return/basket lifter, core temperature sensor holder, tilting cooking jug, temperature ranges: cooking: 30-100 °C, frying: 30-250 °C, frying: 30-180 °C, frying surface 69x63x24 cm, additional protective lid made of stainless steel via display (removable), automatic display of service messages, Weight: 223 kg, built in 2009, dimensions 114x92x112 cm
1000L Vessel Horizontal stainless steel Manufacture: Mueller (NL) Year of Manufacture: 2013 Diameter Approx 1000mm Height Approx 1100mm (including motor) Length Approx 2400mm Stainless Steel Single Skin Bottom Outlet DIN Butterfly Valve Working Pressure 3bar Pressure Gauge Stainless Steel Cradle/Frame with Four Legs Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
11800L Square Vessel - Atmospheric Vertical stainless steel tank 11800L Gross Volume Manufacture: STB Engineering / 2014 Height Approx 2700mm Width Approx 2550mm Depth Approx 2550mm Insulated Stainless Steel Clad sides Cooling Jackets 1.5" RJT Pipework & Fittings Large Top Access Door Second Hand This is a SECOND HAND item and is sold as seen For more information and more available stock please visit us at - advancedbrewing.co.uk
SECOND HAND FILTER TYPE - VELO FILTER MODEL - 0057 / MATR OR11 380 VOLT THIS ITEM IS SECOND HAND AND SOLD AS SEEN For more information and more available stock please visit us at - advancedbrewing.co.uk
General SKU388X977 MakeZirbus TypeVTS 300 LocationBarneveld CEcheck Pressure Working pressure0 Bar Vacuum possiblecheck Main Features MaterialStainless steel Surface2 m2 Specified Features - Freeze dryer Freeze dryercheck Cooling surface2 m2 Number of plates2x 9 Plate sizes500x450 mm Between the plates15 mm With condensercheck With cooling compressor2x MakeTecumsek TypeTFHT2511Z BR Cooling mediumR452a MaterialStainless steel 1.4571 (316Ti) Information No.2152 (typeplate on cooling instalation) Year of construction2006 With switchcheck Floorspace0,85x1,45 m Total height1,85 m Weight400 kg Extra SpecificationsWith vacuum pump, type D25B, cap. 25 m³/hFreeze dryersZirbusDryers > Freeze dryersBrand > Zirbus What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide ...
General SKU245X192 LocationBarneveld CEcheck MakeAtlas Copco TypeZL2 VSD 11 J 400Y Pressure Pressure buildup0.4 Bar Main Features Capacity8.1 m3/Min Motor11 KW Pressure0.4 Bar Specified Features - Blower Blowercheck Capacity485 m³/h Motor11 kW, 400 volt 2935rpm With sound absorbercheck InletDN80 MaterialMild steel Information No.4101951663 Year of construction2022 Mounted in sound absorbing boxcheck With switchgearcheck Floorspace1,0x1,25 m Total height1,45 m Weight460 kgBlowersAtlas CopcoBlowers > BlowersBrand > Atlas Copco What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!
General SKU422U1327 LocationBarneveld MakeBucher Guyer AG Pressure Vacuum possiblecheck Working pressure trays2 Bar Main Features MaterialStainless steel Volume5000 Ltr. Surface30 m2 Specified Features - Tray dryer Tray dryercheck Stainless steel housingcheck Stainless steel trayscheck Heating surface30m² Drying chamber capacity5 m3 Drying chamber sizes1991x2080x1420 mm Max. temperature110°C With jacketcheck Max. temperature100°C Number of trays11 Tray sizes1550x2000 mm Distance between the trays100 mm With 2 doorscheck Connection for the vacuum pumpcheck With vacuum pumpcheck Motor5,5kW, 400/690 Volt, 1455rpm MaterialStainless steel 1.4541 (321) Information TypeVTS D7 30m² Machine number5266/1-11 Year of construction2000 With switchgearcheck Floorspace3x2,6 m Total height2,6 m Weight6300 kg Extra SpecificationsOn top of the tray dryer, a heat ex ...
General SKUR0803 LocationBarneveld MakeJaeggi Güntner (CH) Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell7 Bar Vacuum possible shellcheck Working pressure tubes9 Bar Tubular vacuum possiblecheck Working pressure vapour evaporator13 Bar Main Features Shell (Material)Stainless steel Tube (Material)Stainless steel Surface22 m2 Specified Features - Falling film evaporator Falling film evaporatorcheck Capacity460 kW Number of stages:1 Heating surface22 M2 Tube capacity500 ltr. Number of tubes:112 Tube diameter44,5x2mm Tube length1480mm Shell capacity280 Ltr. Max. temperature200 degr. C MaterialStainless steel 1.4435 (316L) Falling film evaporators Heat exchangercheck Verticalcheck Heating surface23 m2 Tube capacity500 ltr Number of tubes:112 Max. temperature-20/200 degr. C Shell capacity280 ltr Shell diameter700mm Shell ...
For Sale: Variovac Primus – Year of Manufacture 2015, more photos will follow soon, currently being serviced., We offer a well-maintained Variovac Primus thermoforming packaging machine, manufactured in 2015, designed for reliable and efficient food packaging applications. This machine is widely used in the food industry for vacuum and MAP packaging of fresh and processed products., Key Features, - Thermoforming packaging machine, - Suitable for vacuum and Modified Atmosphere Packaging (MAP), - Robust industrial design for continuous production, - Hygienic construction, ideal for food processing environments, - User-friendly control system, - Proven Variovac quality and reliability, Applications, - Meat and poultry, - Cheese and dairy products, - Fish and seafood, - Ready meals and convenience foods, - Other food and non-food products requiring high-quality packaging, Condition, - Year ...
The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
cutting diameter: 290 mm saw band length: 4000 x 27 x 0,9 mm table height: -- mm cutting width: 300 mm band speed: 20 - 100 m/min load centre: 290 mm rotary disc high: 290 x 300 mm capacity 45 degrees: round: 260 mm capacity 45 degrees: flat: 280 x 240 mm height of the workpiece: 1800 x 1900 x 1750 mm weight of the machine ca.: 2200 kg - Fully automatic electro-hydraulic band saw - electric feed unit - max. feed 520 mm - front control panel - electro-hydraulic material clamping - semi-automatic & automatic mode selectable - Miter cuts - Automatic operation up to 45° right - Miter cuts - Semi-automatic operation up to 60° right - stepless adjustment of the saw blade speed The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
A CNC large-format machining center Axa including peripheral equipment is available. Travel X/Y/Z: 4000mm/900mm/950mm, working area X/Y: 4000mm/700mm, tool stations: 72, spindle speed: 10000rpm, control: Heidenhain iTNC 530, operating hours: 77956h, spindle hours: 29342h, power-on hours: 80109h. Including chip conveyor, internal cooling, chip spray gun, oil mist extraction, handwheel, probe and tool measurement Blum Laser. Documentation available. An on-site inspection is possible.
Dissolver VMA Getzmann Dispermat LC 30 Power 0.3 kW Speed range 0-20000 1/min Toothed pulley 50 mm Accessories on request Very good condition, straight from production
Linear weigher: Gentle and precise filling technology Our linear scale is the ideal solution for easy and precise dosing and filling of products. It combines accuracy with a gentle handling process. Thanks to the minimal drop height, product damage is effectively avoided, which ensures the quality of your goods, even with delicate products. Flexible and efficient operating principle The core of our technology is a simple but extremely effective operating principle: The products are transported via linear conveyor belts or vibratory troughs and dosed into weighing containers in a targeted manner. Features: - Easy operation and cleaning - Convenient control via color touch screen - Storage for various weighing recipes - Precise weighing results thanks to three-stage weighing coarse / medium / fine weighing, individually programmable - Tool-free format changeover. - Intuitive ...
Aufschnittmaschine / Slicer Bizerba Type: VS 12 Technical data: 400 Volt / 50 Hz Year of Make: 2006 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife with normal carriage for sausage or cheese Power current / 16A CEE plug Function checked, machine ready for immediate use! Condition, see original pictures! If you have any questions, email or call.
Semi-automatic slicer / slicer Bizerba Type: VS 12 A Technical data: 400 Volt / 50 Hz Year of Make: 2006 Cutting thickness adjustment: 0.5 to 24 mm Knife diameter: 330 mm Stainless steel knife with normal carriage for sausage or cheese Power current / 16A CEE plug Sale as a SPARE PART / DEFECT because the attachments are missing, machine is running. Condition, see original pictures!
Features - Easy operation and cleaning - Convenient control via color touch screen - Storage for various weighing recipes - Precise weighing results thanks to three-stage weighing coarse/medium/fine weighing, individually programmable - Tool-free format changeover Technical data - Weighing range: 20gr to 4000gr - Accuracy: up to 0.5gr, depending on the product - 6 litre weighing container - Max. speed: 60 weighings/minute - Weight: 240kg - Material: 304 stainless steel - Connection: 220V / 50Hz / 6A
Universal machine for eroding and grinding various PCD tools up to 250 mm in diameter and 200 mm in length in production and service. Accessories: Total enclosure,, Extraction N183,, Cooling and cleaning device for dielectric,, Automatic fire extinguishing device,, Loader for erosion disc sets with CNC-controlled swivel arm for loading and unloading, 1 set of gripper fingers for workpiece automation HSK 63/SK40, Workpiece carrier adaptation A-axis from SK 50 to HSK 63 A,, 1 exchange element with flange,, 1 x flushing kit,, Test bar, X axis travel: 440 mm, B-axis: +/- 15°, Y axis travel: 876 mm, Z-axis travel: 420 mm, E-axis swivel range: 210°, A-axis rotation range: 360°, workpiece carrier base: SK 50, workpiece length max.: 200 mm, Workpiece diameter max.: 250 mm, workpiece weight: 15 kg, Connected load approx.: 6.7 kW 400V/50 Hz, Weight approx: 7000 kg, Dimensions W x D x H =: 1987 ...
Used vertical packaging machine made by Velteko model HSV 101S1. New 2002. The machine is equipped with auger dispenser and a date dispenser + receiving conveyor + PRISMA 08D3 checkweigher. TECHNICAL PARAMETERS: The HSV 101S machine is designed for packing loose and small goods into bags, which the machine forms from a roll of packing material. The machine is designed for normal working environment protected from the influence of atmospheric agents with temperature regulation (-5 to +40°C) -AB5, AC1, AD1, AE1, BA4, BOI, BE1, CA1, CD1 - according to HD CENELEC 384.3 S 1 The parts of the machine coming into contact with foodstuffs are made of stainless steel (17 240 Cr-Ni) suitable for contact with foodstuffs. The capacity of the machine depends on the grade of packaging material, the goods being packed, and the capacity of the dispenser. - Performance of the machine (layered ...
Technical data: - Operating hours 20256 h - Operating pressure 13 bar - Delivery rate 4.09 m³/min - Drive 400 V / 26 kW - Motor speed 3000 rpm - Space requirement approx. W 900 x H 1750 x D 900 mm - Weight approx. 490 kg
Floor Slabs (Filigree) Carousel VOLLERT, Control: PTA-WIGGERT Capacity approx. 800m2/ day Steel pallets 2,4 x 13,5 m, 43 pieces Manufacturer Nuspl and Schwinghammer Year of construction 1994 Complete steel processing (FILZMOSER) Including longitudinal wire straightening machine with 6 wires and hyperbolic rotor, diameter 6-14 mm Cross wire roller straightener diameter 8 mm Producing of spacers on cross wires Lattice girder processing, measuring and cutting equipment Steel robot for laying bars and lattice girders Cleaning and plotter, Weckenmann Concrete spreader, Weckenmann Vibration station SKAKO Curing chamber with fully automatic restacking crane VOLLERT Control system completely renewed in 2014 by PTA Wiggert Master computer is integrated
Machine in perfect condition, immediately ready for use, overhauled 2018/19, Operating h: approx. 6,000 Beckhoff control system Head 160 Single with Viewing Strip and PWDS Video on request
width of the strips: / mm band length: / mm band speed: / m/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Key data: 20 KW, 400 V
Vaillant Gas Generator (CHP) Eco Power 20.0 Gas electricity and heat generators from 2016 with 52,214 operating hours, closed unit. 20 KWel x 1,540 rpm, 400 V/50 Hz. CHP Vaillant Eco Power 20.0 Manufacturer: Vaillant Model: Eco Power 20.0 Type: Gas CHP Serial Number: 21161100100186070936000041N6 Power [KWel]: 10 – 20 Power (50/30°C) [KWth]: 29 – 44 Year of Make: 2016 Hours: 52,214 Weight unit [kg]: 867 Dimensions LxWxH [m]: 1.90 x 1.05 x 2.00
maximum number of results exceeded
please refine your search
