nef 40 ct used for sale

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

For sale are several screw jacks from the manufacturer NEFF Gewindetriebe GmbH, type C3-RF-6-T30x6, in various designs. These are new or unused components. Basic technical data (slightly different depending on the model): - Type: C3-RF-6-T30x6 - Size: C3 - Ratio: i = 6:1 - Stroke: 300 mm - Installation position: vertically upwards - Spindle type: rotating spindle - Trapezoidal lead screw: TGS-R-30x6-RH - Operating torque: approx. 6.1 Nm / Starting torque: approx. 8.5 Nm - Total lengths: 450 mm or 496 mm depending on the model - Special designs: Models with bellows and adapter available - Spindle nut: Bronze, Ø 60 mm Hint: There are several variants available. Details on the execution can be requested individually.

Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - / Contact us at -

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 2000 mm   height above floor level: 540 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 460 mm/s   working velocity min.: 25 mm/s   working velocity max.: 44 mm/s   return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 180 kW DIMENSIONS / WEIGHTS   total weight approx.: 95000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnac ...

Pressure 6.3 to. ub 450 mm, extension 200 mm, pushing speed 3.5 m/min, installation height 700 mm, table size 360 x 320 mm, table height 750 mm, total power 2kW, weight. 900 kg

Force of pressure: 63 t table size: 610 x 800 mm throat depth: 350 mm stroke: 200 mm Electr. Supply: 380 V, 15 kW space: 1800 x 920 x 2440 mm weight: 3940 kg

pressure:6,3 t throat:300 mm stroke:300 mm distance table/ram, max. stroke up, adjustment up:800 mm table surface area:450 x 400 mm hole in the table:80 mm table height over floor:700 mm ram surface:50 mm oil volume:90 l power requirement:5,5 kW weight:1,35 t dimensions (WxDxH):1,8 x 2,0 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 depth stop:mechanical

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm pressure of drawing cushion in table:5 t stroke of drawing cushion in table:80 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm dimensions (WxDxH):1,9 x 1,3 x 2,7 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2 light guard:Sick FGS 600 drawing cushion in table:hydraulic foundation pit:not necessary

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary

pressure:6,3 t throat:210 mm stroke:200 mm distance table/ram, max. stroke up, adjustment up:300 mm table surface area:380 x 350 mm hole in the table:100 mm table height over floor:1050 mm ram surface:45 mm power requirement:4,0 kW weight:0,8 t dimensions (WxDxH):0,8 x 1,2 x 2,6 m German Safety: permitted for manual loading:UVV 11.064 - VBG 7n5.2

Pressure:40 t throat:330 mm stroke:250 mm distance table/ram, max. stroke up, adjustment up:450 mm table surface area:800 x 500 mm hole in the table:100 mm table height over floor:900 mm ram surface:100 mm Speed down:406 mm/s Speed up:393 mm/s Working speed:14 mm/s oil volume:350 l power requirement:7,5 kW weight:4,6 t dimensions (WxDxH):1,3 x 2,3 x 3,4 m German Safety: permitted for manual loading:CE-sign depth stop:mechanical

Dimension on clamping table: 1000x140 Condition: possibly defective Auction-ID: A7-46619-356

DMG MORI NEF 400 CNC turning center was built in 2009 in Poland by FAMOT Pleszew S.A. The machine, distinguished by its compact design and high efficiency, is used for precision machining of workpieces with a maximum diameter of 350 mm. The machining process is performed inside a fully illuminated workspace by means of a high-speed spindle and precision cutting tools taken from a 12-position turret. The extremely rigid design eliminates any vibration and oscillation, ensuring maximum process stability during even the most intense challenges. All these features make the DMG NEF 400 the best choice for any industrial plant. The GILDEMEISTER NEF 400 CNC lathe was used for prototyping and worked for a total of 6492 hours. The offer also includes extensive equipment, consisting of, among others, an advanced HEIDENHAIN CNC control, driven tools and a chip conveyor. Technical specificatio ...

GILDEMEISTER NEF Plus 500 CNC lathe was manufactured in 1997. The machine, designed for precision machining of workpieces with a maximum diameter of 500 mm, has two spindles (main spindle and sub-spindle) of high speed and power, which will improve even the most intensive machining. The installed GRUNDING CNC controller with colour screen and control panel also allows for cycles to control. The total weight of the machine is approximately 3000 kg. Technical specifications of the GILDEMEISTER NEF Plus 500 lathe - CNC control: GRUNDIG - maximum turning diameter (over bed): 500 mm - maximum turning diameter (over saddle): 290 mm - maximum turning length: 1500 mm - main spindle rotational speed range: 80-2800 rpm - main spindle passage: 70 mm - main spindle drive power: 11 kW - maximum sub-spindle rotational speed: 5000 rpm - sub-spindle drive power: 7.5 kW - total power require ...

Key data: 600 mm, 1200 mm

Machine Details Stock-No. 1105-04018 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 V3 Year of manufacture 2011 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min Face Stroke 400 mm Tailstock Quill Diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information NEF 600 V3 FROM 2011 acc.: hydr. 3-jaw chuck 380 mm, chip conveyor, coolant 3 AXIS WITH LIVE TOOLS 3 AND 10 FIXED TOOLS

Description Sell used DMG NEF400 V3 5th Generation ISM 2-Axis Universal Lathe with C-Axis. Travel: X: 255mm Z: 800mm Lsbh Dtw Ujurtmre Hjrt Turning diameter over bed: 385mm Vibration diameter: 350mm Turning Length: 650mm Equipment: Main spindle as integrated spindle motor Speed: Max. 4500rpm Drive power: 8.0/11.5kW (100/40% ED) 12-speed disc turret VDI30 with 6 driven positions C-axis and spindle brake (Hydr.) Automatic tailstock, MK4 mount, travel: 680mm CNC control Siemens 840D Solutionline with ERGOline Control, Sinumerik Operate and ShopTurn 3G Linux operating system Technology cycle for the application of an alternating speed for vibration-critical clamping Tool measuring device can be used manually in the working area Hydraulic Coolant spray gun Mechanical Oil Mist Separator Reinforced Coolant Pump 12bar ...

This 5-axis OTC Daihen NH52-NEFC robot arm was manufactured in 2018. Ideal for complex welding tasks, it offers precision and flexibility in various applications. Consider the opportunity to buy this OTC Daihen NH52-NEFC robot arm. Contact us for more information.

Key data: 600 mm, 1250 mm, 3000 1/min

Machine Details Stock-No. 1105-03939 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2006 Type of control CNC Storage location HAGUENAU FRANCE Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm control SIEMENS 840 D greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information Acc. 3-Jaw Chuck 315 mm, tailstok turret 8 P ,chip conveyor, coolant CNC Siemens 840 D

Key data: 600 mm, 1250 mm, 3500 1/min

Machine Details Stock-No. 1105-03997 Type of machine CNC Lathe - Inclined Bed Type Make GILDEMEISTER DMG Type NEF 600 Year of manufacture 2007 Type of control CNC Storage location HAGUENAU Country of origin Germany Delivery time immediately Freight basis EX WORK Price Technical details turning diameter 600 mm turning length 1250 mm greates pass round over bed 600 mm centre height 350 mm Spindle Bore 92 mm turning speed range 3500 rpm Rapid Travel - Longitudinal/Face 20 m/min face stroke 400 mm tailstock quill diameter 100 mm Tailstock Quill Stroke 1150 mm tailstock taper MT 5 Turret (X-Stations) 12 turning diameter over slide 410 mm Additional information acc.: hydr. 3-Jaw Chuck 400 mm, Chip Conveyor, Coolant CNC FANUC 210 IS

Key data: 350 mm, 700 mm, 4000 1/min

Machine Details Stock number 1105-04023 Machine Type: CNC Lathe - Inclined Bed Machine Make GILDEMEISTER Type NEF400 / 840D Shopturn Year of construction 2006 Condition Control type: CNC Control Siemens 840D Shopturn Storage location FRANCE Country of origin Germany Delivery time immediately Freight base from Dreieich warehouse Price Technical details Turning diameter 350/270 mm Turning length 700 mm Control Siemens 840D Shopturn Circumferential diameter max. over bed cover 400 mm Travel - z 700 mm Spindle bore 65 mm Spindle speeds max. 4000 rpm Tool holder VDI 30 Turret head 12 pos. Three-jaw chuck diameter 200 mm Spindle holder A6 DIN55026 Pick-up cone in the tailstock quill MK 3 Drive power 15/12 kW Operating voltage 400 V Machine weight approx. 3.0 t Information - Control: Siemens 840D Shopturn - Tool holder VDI 30 APPROX. 12 PIECES - Coolant de ...

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2263; Gross weight [kg]: 2263; Engine: NEF67TM3A; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 600

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2301; Gross weight [kg]: 2301; Engine: NEF67TM3A; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 600

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1868; Gross weight [kg]: 1868; Engine: NEF45TM3; Accessories: Product features:, Drip-tray, Switch board, Volt meter, Amp meter, Hertz meter, Start battery, Exhaust system; Water Tank Volume [l]: 390

; Gross weight [kg]: 2350; Engine: Iveco NEF67TM4.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

; Gross weight [kg]: 2420; Engine: NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy, -Deutz TCD4.1 - Genset 110 kVA St5 SuperSilent- DPX-21004 + €23.500, -; Water Tank Volume [l]: 360

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

-Noise rating: 55 dB at 7m; Gross weight [kg]: 3400; Engine: NEF67TM3A; Accessories: Tanker, Battery, Control Panel, Stahldach, -Super Silent Canopy; Water Tank Volume [l]: 500

CNC lathe Type: NEF 400 Manufacturer: DMG Year: 2009 Control: Siemens ShopTurn Chip conveyor Probe Driven tools Some toolholders Machine in good condition, fully functional, under power. Glass of control system is broken but control system is fully working. Find more here - / Contact us at -

; Gross weight [kg]: 2000; Engine: NEF45SM1A; Accessories: Tanker, Battery, Control Panel, Stahldach, - Super Silent Canopy, - Including: battery charger and coolant heater, - input socket: 230V , - Output sockets: 2x 230V 16A, 2x 400V 32A, 1x 400V 63A, 5x powerlock; Water Tank Volume [l]: 215

Technical data: Manufacturer: Gildemeister Type: NEF 400 Year of Make: 2007 Control: Siemens 840D ShopTurn Travel X/Z: X 220 mm, Z 700 mm Operating hours: 31,812 h Working spindle Spindle bore: 65 mm Speed: 4,000 rpm Power: 15/12 kW Torque: 400/320 Nm Rapid traverse X/Z: 15 m/min Circumferential diameter over bed: 400 mm Turning length: 650 mm Tool turret Direct recording: 8x Shaft cross-section: 20 x 20 mm Shaft diameter for drill rods: 25 mm Tailstock Tailstock: MK4 Quill stroke: 40 mm Dimensions and weight Dimensions: 2,100 mm x 1,750 mm x 1,710 mm Weight: 2,800 kg Condition Condition: Used Functional: Tested and fully functional

; Gross weight [kg]: 1315; Engine: Iveco NEF45TM2A; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 1650; Engine: Iveco NEF45TM3.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and Battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 185

; Gross weight [kg]: 2350; Engine: Iveco NEF67TM7.S500; Accessories: Tanker, Battery, Control Panel, Stahldach, Including: Coolant heater and battery charger, Including: sockets 125A - 63A - 32A - 16A; Water Tank Volume [l]: 224

NC Lathe Gildemeister Nef 500 BJ 1996

Lathe Gildemeister NEF 710

Manufacturer: DMG Mori Seiki Model: NEF 400 V3 Driven tools: 6 cross-driven tools Control System: Heidenhain Manual Plus Year of Manufacture: 2013 Find more here - / Contact us at -

Universal lathe GILDEMEISTER NEF 320 K With Siemens SINUMERIK 810 DE (SIMATIC PANEL TOUCH SCREEN) control Year of Make: 2003 Spindle bore: 52 mm Center width: 750 mm Circumference Ø over bed : 320 mm Circulation O over face slide: 150 mm Face travel : 185 mm Speed range: 14 – 3550 rpm infinitely variable With the following accessories: Slide protection with interior lighting Multifix tool holder with 2 inserts 3 jaw chuck SCHUNK ROTA plus 0 200 mm 2 set of soft top jaws Coolant Setup Chip rinsing gun 6 pcs. machine shoes Operating instructions The machine is in very good condition

A CNC lathe Gildemeister including a chip conveyor and a Forkat chuck is available. 1) Gildemeister NEF CT 60, year of manufacture: approx. 1982, distance between centers: 1000mm, turning length: 1000mm, max. turning diameter: 460mm, center height: 300mm, bed width: 450mm, spindle bore: 107mm, speed: 3015rpm, tool stations: 12, quill diameter: 100mm, quill stroke: 180mm, machine dimensions X/Y/Z: approx. 5400mm/2100mm/2000mm, weight: approx. 7000kg. 2) Chip conveyor Allweiler GB 30L 38L. Without Filter. Documentation available. An on-site inspection is possible.

Used machine CNC lathe Machine type: DMG Gildemeister NEF 600 Control: Heidenhain IT Turn Plus Year of Make: 2006 TECHNICAL DATA: Max. turning length: [mm] 1,250 Max. Rotary Ø over bed: [mm] 600 Max. rotary Ø over slide: [mm] 410 Spindle bore: [mm] 90 Number of controlled axes: 2 Speed range: [1/min.] 3,000 Drive power: [kW] 36.5 / 27.5 Torque: [Nm] 785 Tailstock MK 5 Quill 80mm Number of turrets: 1 Travel X-axis ob. Rev. / unt. Rev.: VDI 40/8 Tool positions: 8 Machine weight: [kg] 5,500 Space requirement (LxWxH): [m] 5.0 x 2.0 x 2.2 m Features: Chip conveyor 3-jaw chuck [mm] 315 This offer is subject to change and non-binding. Changes, errors and prior sale expressly reserved.

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Cloos, mains interference filter -Type: NEF FS5825 -Dimensions: 265/75/H50 mm -Weight: 0.7 kg

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1568; Gross weight [kg]: 1568; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2409; Gross weight [kg]: 2409; Engine: NEF67TM7; Accessories: Product features:, Start battery; Water Tank Volume [l]: 600

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2409; Gross weight [kg]: 2409; Engine: NEF67TM7; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 600

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2409; Gross weight [kg]: 2409; Engine: NEF67TM7; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 600

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 2263; Gross weight [kg]: 2263; Engine: NEF67TM3A; Accessories: Product features:, Drip-tray, Start battery; Water Tank Volume [l]: 450

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1868; Gross weight [kg]: 1868; Engine: NEF45TM3; Accessories: Product features:, Switch board, Start battery, Exhaust system; Water Tank Volume [l]: 390

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1568; Gross weight [kg]: 1568; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390

turning diameter: 350 mm turning length: 650 mm control: 840 D SL ShopTurn Siemens greates pass round over bed: 385 mm Swing dia. over traverse guideway: 350 mm Main spindle:: turning speed range - main spindle: 0 - 4.500 min/-1 power capacity - main spindel: 11,5 / 8 kW max. Torque: 340 Nm spindle diameter in front bearing: 130 mm spindle bore: 87 mm bar material dia.: max. 65 mm max. chucking diameter: 250 mm spindle head: 170 h5 C-Axis: turret:: number of toolpositions: 12 pos. Shank diameter: DIN 69880: 30 mm Driven Tool Stations:: Number of driven toolspositions: 6 pos. Spindle speed - driven tool stations: max. 4.500 min -1 power capacity driven tool-stations: 5,5 kW axis stroke:: x-axis: 255 mm z-axis: 800 mm Tailstock:: tailstock: 680 mm taper of center: MK 4 clamping capacity: 6,8 kN feeds:: feed speeds: 0 - 30.000 mm/min rapid traverse ( X / Y / Z ): 30 / - / 30 m/min Fe ...

Over 80 years experience in maintenance., Expert that jointly reflects on the ideal solution for your situation., 1,000 hours or one-year guarantee: optimal reliability., Available 24/7., Quickservice., We can always supply a replacement generator., Wide range of stock that can be supplied immediately.; Transport weight [kg]: 1656; Gross weight [kg]: 1656; Engine: NEF45SM3; Accessories: Product features:, Drip-tray, Start battery, Exhaust system; Water Tank Volume [l]: 390