nef 40 ct used for sale

Duplo system 4000, consisting of the following components:, Duplo DC-10/60 collator, Duplo DBM400 bookletmaker (Stitcher+folder, 2xHohner 48/5S), Duplo DBM400t trimmer, Duplo DBM SS1 short stacker, Duplo DC-4000 bridge, Duplo 4000 LUL-HM, Duplo DC12JR vibrating table, this line can collate up to 10.000 sets per hour or 4,200 booklets per hour, Max size: 350x500 mm, Paper weights: 40-300 grams, bin capacity: up to 65 mm, 10 bins, suction feed with built in pump, double sheet and missing sheet control, Collating speed: 10000, Booklet making speed: 420, Bins: 10, Max size: 350x500 mm

Overview This Scaligera ULISSE 4000 is a sleeve labeling machine for cans, built in 2016 by Scaligera Packaging in Italy. It applies sleeves to sleek and standard cans at up to 4,000 cans per hour and comes with its matching Scaligera steam shrink tunnel from the same year. The line ran carbonated soft drinks in cans and was in production until early September 2023. The machine runs left to right. Sleeves are cut from the reel, opened and placed over the can in the sleever; the steam tunnel then shrinks them tight onto the can body. Technical data Manufacturer: Scaligera Model: ULISSE 4000 Year of manufacture: 2016 Machine type: sleeve labeler with steam shrink tunnel Output: up to 4,000 cans/h Containers: sleek and standard cans Machine direction: left to right Power supply: 400 V, 3-phase, 50 Hz Connected load: 8 kW in total (sleever 2 kW, steam tunnel 6 kW) Max. current: sleever 7 A,  ...

; Power [PS]: 544; Gross weight [kg]: 12000; Engine: Battery System: LIFePO4; Accessories: Tanker, Control Panel, Wiring port: L1, L2, L3, N, PE, Power Input:, - AC socket: 3P/5W, 1x400kW, 4x20kW, - AC copper: 3P/4W, 400kW, - DC socket: 110kW, Power Output:, - AC socket: 3P/5W, 1x400kW, - AC socket: 1P, 1x16A; 3P, 1x32A, - AC copper: 3P/4W, 400

turning diameter over bed: 4000 mm turning diameter over slide rest: 3500 mm turning length: 30000 mm centre height: 2000 mm workpiece weight: 160 t bed width: - mm bed height over floor: - spindle turning speed range: 0,5 - 80 U/min main drive motor: - kW faceplate diameter: - mm Control: Siemens 840D total power requirement: - kVA weight of the machine ca.: 160 t 2006 modernized/Overhauled and equipped with: - 4-guides bedway - CNC Control Siemens 840D - Face Plate - Counter Stay The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

turning diameter: 385 mm max. turning diameter: 620 mm turning length: 958 mm control: MSD 501 II Mori Seiki greates pass round over bed: 710 mm Swing dia. over traverse guideway: 738 mm centre distance: 1.125 mm Main spindle:: turning speed range - main spindle: 10 - 1.600 min/-1 power capacity - main spindel: 30 / 22 kW spindle bearing diameter: 180 mm spindle bore: 130 mm spindle nose: JIS A2-11 axis stroke:: x-axis: 345 (310+35) mm z-axis: 995 mm turret:: number of toolpositions: 12 pos. Shank height for square tool: 32 mm Drill shank diameter: max. 60 mm turret change time: 0,4 sec. Tailstock:: tailstock adjustment: 850 mm dia. of quill: 110 mm taper of center: MK 5 quill stroke: 150 mm feeds:: rapid traverse: X: 20 / Z: 24 m/min Tipp feed: 0 - 1.260 mm/min total power requirement: 64 kVA weight of the machine ca.: 11,5 t dimensions of the machine ca.: 5,0 x 2,5 x 2,5 m Documen ...

The machine is in good technical condition; inspection is possible by prior arrangement.

DELTA LC 400 - Rotary Table Grinding Machine -Magnetic clamping plate (rotary table) 300mm -Max. grinding diameter 400mm -Grinding height (distance table - grinding wheel) approx. 230mm -Spindle speed 2850 rpm -Fine adjustment 0.01 mm -Distance column - grinding wheel axle approx. 320mm -Spindle motor 3 KW -Grinding wheel dimensions 200x80x78mm -Machine enclosure -Coolant device -Documentation Dimensions: LxWxH 1.2x0.8x1.8 meters / weight approx. 700Kg

The machine is in good technical condition; testing is possible by prior arrangement. NC-controlled X and Y axes, manual crowning table, backgauge extension to 1000 mm, Fiessler Akas Laser safety system, sectional tooling (upper: 30°, R 0.8 and 3 mm). Not used since 2019.

Pump Manufacturer: Habermann Model: 150/400 The pump is defective, parts are already missing, is sold as a spare parts carrier. For more details, see pictures. Internal number: 629 061

Indexable insert drills, high-performance drills with indexable inserts, solid drills, end mills, shank cutters, milling cutters, indexable insert end mills, end mills with internal cooling, indexable insert end mills, boring heads -Manufacturer: Amec, adjustable indexable insert drill Revolution Drill with internal cooling -Type: V Maxx R44x35-40M -Shaft diameter: 40 mm -Drill diameter range (D1): 66.0 mm to 71.1 mm (adjustable via cartridges) -Drilling depth: 3.5 x D / Usable length approx. 253 mm -Reversible inserts: not included -Dimensions: Ø 63 x 355 mm -Weight: 5.0 kg

Bitzer compressor unit -Type: 6F-40.2Y-40P(x5) -Flow rate: 151.6 m3/h (x5) -R404A cooling capacity: 500 kW at -5°C/40°C, 415 kW at -10°C/40°C, 213.5 kW at -25°C/40°C - Dimensions: 4400 x 1050 x 1250 mm -Stock: 1 piece -Stock number: Z140 -Condition: Used, very good, after testing, ready to work

Manufacturer: HAAS Model: EC 400 4AX HE Year: 2006 Condition: Used Stock number: 9566 Maximum pallet load: 300 kg Maximum spindle speed: 12000 1/min X-axis travel: 508 mm Y-axis travel: 508 mm Travel Z-axis: 508 mm

ZIPPEL REMA K1 400 3 LB Industrial parts cleaning plant (washing plant) Year of construction 2013 Washing, rinsing Drying in a continuous system with washing basket to remove oils, chips and dirt from workpieces before further processing or assembly. Approval according to WHG. System still under power. Machine description – see PDF. All technical information, illustrations and content are non-binding and without guarantee. Subject to changes and errors. All other accessories visible in the photos are not included in the scope of delivery, therefore not a component for this sale. The scope of delivery only includes the accessories that are expressly listed here, in the order confirmation and invoice. EXW (Ex Works) D-92729 Weiherhammer Exclusively dismantling, spreading and loading Delivery time immediately Subject to prior sale / payment immediately upon completion  ...

Key data: 4040 mm, 1 mm

used Schechtl swivel bending machine, with roller shears on the upper beam, Two foot switches, attachment rail 10 and 20m m Machine is repaired, checked, cleaned by a specialist and is then fully functional. Test run is being carried out Working length: 4040 mm Sheet thickness steel: 1.5 mm Sheet thickness aluminum: 2.0 mm Sheet thickness front: 1.0 mm without backgauge Colour: grey/blue Total power requirement: 16 A Dimensions: 4965 x 720 x 1220 mm Machine weight: 3950 kg Upper beam stroke: 140 mm with roller scissors/ Opening width: 140 mm Bending angle (max.): 160 degrees Underbeam adjustment yes Machine number: MA7675

Used HOESCH chamber filter press. Technical specifications: Manufacturer – Hoesch Germany Type – 40/400806/4 Capacity – approximately 0.5 m3 Filtration area – approximately 40 m2 Operating pressure – up to 0.4 MPa Frame material – polypropylene Number of frames – 41 Year of manufacture – 1988 Plate size – 800 x 800 mm Operating pressure – approximately 6 bar Electrical box with press control.

Prints labels and applies them straight away, This labeller prints the label as the pack arrives and then blows it onto the pack with air (blow applicator). That lets you put current data such as date, weight or lot number directly on the product. Printer and applicator hang from a column above a short conveyor and can be adjusted in height., According to the documentation supplied with the machine, it is an LPX 400 blow labeling system from Van Oers United. We did not find a rating plate with the year of manufacture., Located in Emmeloord, the Netherlands. Immediately available, price on request., More photos and full specifications: stcfoodsolutions.nl/en/machine/van-oers-lpx-400-print-and-apply-labell er/, Type: Print and apply labeller, Print method: Thermal transfer (ribbon), Application: Blow applicator (air), Construction: On column with conveyor, height adjustable

Inclined conveyor for moving product in food processing lines, This Eillert TR-3700-400-425 is an inclined belt conveyor with a stainless steel frame and a blue plastic belt fitted with cleats. It stands on a mobile frame with adjustable feet, allowing the conveyor to be levelled and repositioned on site. The drive runs on 400V three-phase power and is fitted with its own control box with start-stop button. Eillert, based in Ulft in the Netherlands, is known as a manufacturer of processing machinery for the vegetable, fruit and potato sector., Located in Emmeloord, the Netherlands. Immediately available., More photos and full specifications: stcfoodsolutions.nl/en/machine/eillert-tr-3700-400-425/, Type: Inclined belt conveyor, Belt: Blue plastic belt with cleats, Frame: Stainless steel, mobile, adjustable feet, Power supply: 400 V, three-phase, Controls: Own control box with start-stop b ...

The scope of delivery includes: 01x L - Collision protection corner, new Material colour: hot-dip galvanised Leg design: Corners slanted Total height: approx. 400 mm Total width: approx. 310 mm Total depth: approx. 180 mm Leg length (A): approx. 175 mm Leg length (W): approx. 175 mm Hole spacing: approx. 128 mm Drill hole Ø: approx. 14 mm Weight | Pcs.: approx. 6.01 kg Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x L - Collision protection corner, new Material colour: RAL 1018 zinc yellow / black according to DIN standard Total height: 400 mm Leg length (A): 170 mm Leg length (W): 170 mm Material thickness: 5 mm Required dowels: 4 pcs. Weight pcs.: 6.10 kg Dkobq Aez Nvp Nsazuasu General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x U-shaped collision protection corner, new Material colour: yellow / black (according to DIN standard) Total height: 400 mm Total width: 340 mm Total depth: 205 mm Unit weight: 10.366 kg Opening inner dimensions: 240 mm Base plate: 50 x 200 mm Bore diameter: 15.5 mm Leg length at the bottom: 200 mm Top leg length: 200 mm Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

The scope of delivery includes: 01x U-shaped collision protection corner, new Material colour: yellow / black (according to DIN standard) Total height: 400 mm Total width: 350 mm Total depth: 200 mm Unit weight: 7.92 kg Opening inner dimension: 236 mm Base plate: 60 x 200 mm Bore diameter: 15.5 mm Leg length at the bottom: 200 mm Top leg length: 55 mm Material thickness: 5 mm General information about the article: This item is only offered for collection. An additional transport requested or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

Offer 26216 Technical data: - Saw blade diameter up to 400 mm - Mitre adjustable left + right up to 30° - Cutting range at 90° round + square 140 mm - Rectangle 210 x 120 mm - at 45° round + square 120 mm - at 30° round + square 105 mm - Cutting speeds infinitely adjustable 10 to 80 m/min - Feed speed of the saw blade hydr. infinitely variable - Pneumatic vise / vice - Coolant device + micro spray system - Discharge roller conveyor with dimension stop 3000 mm - Roller conveyor feed 3000 mm - Pneumatic connection 6 bar - Drive 400 V / 4.0 kW - Space requirement approx. W 1000 x H 1900 x D 1200 mm - Weight approx. 1000 kg

: neu : ca. 4 Monate ab Auftragse : Italien : 258000 € : 400 to : 500 mm : 5.000 x 3.050 mm : 700 mm : 20 mm/s : 2 mm/s : 4500 mm : 5000 mm : 2600 mm : 24000 kg : horizontal verschiebbar : 3050 mm : 2.200 mm : 3.600 mm Horizontal verschiebbarer Zylinder2.200 mm Hydraulisch beweglicher Ständer: 3.600 mm Bedienung über Handhebel sowie Bedienpanel Tisch mit integriertem Zylinder zum anheben des Werkstücks Ausrüstung gemäß CE Vorschriften Betriebsanleitung in DEUTSCH und ENGLISCH (Symbolfoto) The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

: neu : ca. 4 Monate ab Auftragse : Italien : 218000 € : 400 to : 500 mm : 4.000 x 2.550 mm : 700 mm : 20 mm/s : 2 mm/s : 4000 mm : 4000 mm : 2600 mm : 20500 kg : horizontal verschiebbar : 2550 mm : 1.800 mm : 2.900 mm horizontal movable cylinder hydraulicaly movable stand control by levers as well as control panel according to CE regulations user manual in GERMAN and ENGLISH OPTIONS: Work table, welded to the base frame, with holes on the surface Control panel on the swivel arm (push buttons for press movement, solenoid valves, Siemens CPU) Radio control panel (push buttons for press movement, solenoid valves, Siemens CPU) Siemens control with touchscreen Lifting cylinders in the table (6, 8 or 10 pcs.) No-rotation shaft for the piston 2 speeds for stand movement and cylinder Oil cooler and decompression valve The data for this ad was created with ModulMWS - the software solution of  ...

x-travel: 620 mm y-travel: 420 mm z-travel: 400 mm turning speeds: 50- 4000 U/min total power requirement: 17,5 kW weight of the machine ca.: 1,9 t dimensions of the machine ca.: 2,0 x 2,7 x 2 m Description: - excellent condition - Heidenhain ND780 digital readout - infinitely variable speed control - infinitely variable feed drives - hydraulic tool clamping - mechanical handwheels - electronic handwheel - drilling quill - horizontal milling spindle - coolant system X-travel 620 mm Y-travel 420 mm Z-travel 400 mm Spindle taper ISO 40 DIN 69871A Spindle speeds 50 - 4000 rpm Table size 800 x 400 mm Table load 400 kg Feed rates infinitely variable, max. 2000 mm/min Rapid traverse 5 / 4 m/min Drive power - milling spindle (S1) 10.5 kW Quill stroke 80 mm Coolant system Operating voltage 400 V Total power requirement 17.5 kW Machine weight approx. 1.9 t Space requirement approx. 2.00 x 2.76 x  ...

Key data: 400 V, 500 , 400

New ElectroQuell emergency and continuous generator set – 500 kVA / 400 kW, Iveco CURSOR13TE7W diesel engine, 50 Hz / 400 V. Highlights: This generator has a 30 month warranty · Stamford Alternator & ComAp control module · Alternatively Leroy Somer or Mecc Alte · Also DEIF or DSE. PERFORMANCE DATA • Continuous power (PRP): 500 kVA / 400 kW • Emergency power (ESP): 520 kVA / 416 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Iveco CURSOR13TE7W • Displacement (l): 12.9 • Bore × stroke (mm): 135 x 150 • Compression: 16.5:1 • Charging: Turbocharged & Intercooler • Injection: In-line Injection Pump • Speed Control: Mechanical • Cylinders: 6 DIMENSIONS & WEIGHT • L × W × H: 4810 × 1600 × 2560 mm (soundproofed hood) • Weight: 4890 kg • Fuel tank: 798 l • Sound level: 73 dB INC ...

Key data: 320 V, 400 , 400

New IVECO EQ-I400320 emergency and continuous power generator – 400 kVA / 320 kW, Iveco CURSOR13TE3A diesel engine, 50 Hz / 400 V. Highlights: Product from the EU · 30 Months Warranty · In stock - Only one piece available. PERFORMANCE DATA • Type: EQ-I400320 • Continuous power (PRP): 400 kVA / 320 kW • Emergency power (ESP): 440 kVA / 352 kW • Output: 400/230V, 50 Hz, 3-phase • Rated speed: 1500 rpm ENGINE • Manufacturer / Type: Iveco CURSOR13TE3A • Displacement (l): 12.9 • Bore × stroke (mm): 135 x 150 • Compression: 16.5:1 • Charging: Turbocharger with intercooler • Injection: in-line engine • Speed Control: Mechanical • Cylinders: 6 DIMENSIONS & WEIGHT • L × W × H: 4310 × 1600 × 2560 mm (soundproofed hood) • Weight: 4690 kg • Fuel tank: 798 l • Sound level: 70 dB INCLUDED 4-stroke industrial diesel engine, 1 ...

Ring die new unused. This die is left over from a machine exchange. For CPM Press 7930-4 6.0x95/40mm Original price 5000 Euro

4x Automatic Print & Apply Labeling Systems Bluhm Weber Group LEGI-AIR 4050E / 4050E NC(V2) – incl. Zebra ZE500 printer and documentation For sale are four high-quality, automatic label printing and dispensing systems (Print & Apply) of the Bluhm Weber Group (Weber Marking Systems), model series LEGI-AIR 4050E. The robust, modular systems are designed for continuous industrial operation in logistics and production. All devices have integrated Zebra ZE500 thermal transfer/direct thermal printers as well as complete documentation. Condition: fully functional, just dusty. Overview of the systems: 2x LEGI-AIR 4050E NC(V2) – Top Apply Automatic Labeler Top Zebra Printer ZE500 Pneumatic, height-adjustable 900–2200 mm Label format: 150 × 110 mm Type designation among others: 30 – RH – ZE543 – LK400 Connection: 100–240 V AC / 50–60 Hz / 700 W / 6 bar ...

approx. 10 pieces, labeller incl. printer – used - : Price per piece from location: Lift from above onto the boxes: now only 3.500.-€ instead of 3.950.-€ (net)! Lift from the side to the boxes: now only 2.950.-€ instead of 3.950.-€ (net)! Price for the BJ 2023 device: now only €3,950 instead of €4,950 (net)! Manufacturer: Weber Type: Legi Air 4050EG, and e.g.: 4050E CC (Gen.3- from BJ 2023) Year of Make: 2014 SN: e.g.: 50001222 Incl. column and applicator (partly from the side, partly from above) 5 devices glue the labels to the cardboard from above, 5 devices stick the labels from the side to the box Condition: good Available: from approx. Q4/2026 Location: Frankenberg camp / Saxony

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: Deuma Heitze, container rotating device, welding rotating device type 406/2 G -Load capacity: kg -Roller spacing: 290 - 1100 mm -Rollers: Ø 225 x 300 mm -Rolling speed: 0.24 to 1.30 m/min Right/Left rotation -Control unit: with hand control and foot switch -Individual components: see photos -Transport dimensions: 1380/1110/H900 mm / 940/660/H900 mm -Weight: 706 kg / 463 kg

General SKU338Y834 MakeMAP Italy Serial887 TypeWBHX-4000 / OHK Main Features MaterialStainless steel Volume4000 Ltr. Motor63 KW Specified Features - Powder turbo mixer Powder turbo mixercheck Capacity4.000 l Trough sizesDia. 1500x2450 mm Inletdia. 215/320 mm Inspection hatch2x (755 x 625 mm ) Outlet200 x 200 mm Glands air purgedcheck Motor55 kW,(400 V, 1470 rpm) With variable speed drivecheck Speed mixing shaft8,5-57 rpm With lump breaker2x Motor2x (4,0 kW (380 V, 2865 rpm)) MaterialStainless steel 1.4301 (304) General Year of construction1997 Mounted on framecheck LocationBarneveld With switchgearcheck Sizes switchgear0,80 x 0,40 x 1,90 m Floorspace4,40 x 1,90 m Total height2,40 m Weight3500 kgPowdered foodsGeneric medicinesTea, herbs & coffeeFine chemicalsStarchOther chemicalAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOther phar ...

Machine name: Polymer plant Manufacturer: Alltech Type: Polymat 4000E Year of Make: 2002 Drive motor: 3 x 0.37 kW Content: 4000 liters Material: Polypropylene Conveying / dosing of: powdered granules and liquid polymer concentrates Capacity: 1000 - 4000 L/h # Chamber: Three-chamber flow system Dimensions: L 2800 x W 1600 x H 2900 mm Curb weight: 400 kg Tech. Documentation: Yes Remark: Water supply with 6 m³/h at 3 bar Accessories: Dry doser, 2 x progressing cavity pump Condition: Used Price: On request

BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)

A CNC laser cutting machine with a 5kW CO₂ laser and automatic loading and unloading system is offered. Working area X/Y/Z: 4000mm/2000mm/115mm. Laser power: 5000W. Laser unit: CO₂ laser TLF 5000. Max. sheet thickness mild steel: 25mm. Max. sheet thickness stainless steel: 20mm. Max. sheet thickness aluminum: 15mm. Operating hours: Laser-on hours: 39625h. Beam-on hours: 14346h. Control: Siemens Sinumerik 840D. The system is equipped with an automatic loading system that supports sheet metal handling. Inspection possible by prior arrangement.

BIG 40ft HighCube - Container, - Year of construction 2026, - Like new! only used once, Outside dimensions, - Length: 12.192 mm (12.19 m), - Width: 2.438 mm (2.44 m), - Height: 2.896 mm (2.90 m), Internal dimensions, - Length: approx. 12.032 mm (12.03 m), - Width: approx. 2,352 mm (2.35 m) (door opening: 2.34 m), - Height: approx. 2,698 mm (2.70 m) (net clear opening: 2,58 m)

Flow M3 4020bYear of manuf. : 2016 Base axis (X) : mmOutrigger (Y) : mm____________Description:Technical SpecificationsWorking area X/Y:4,000 × 2,000 mmMaterial support area X/Y:approx. 4,100 × 2,100 mmZ-axis travel:approx. 150 mmMax. traverse speed:12,700 mm/minMax. contour cutting speed:7,620 mm/minX/Y positioning accuracy:± 0.04 mm/mX/Y repeatability:± 0.05 mmHigh-Pressure PumpManufacturer / Model:Flow HyPlex Prime 30Motor power:22 kW (30 HP)Max. design pressure:4,150 barContinuous operating pressure:3,800 barMax. flow rate:3.1 l/minPower supply:400 V / 50 Hz / 3-phaseStandard Equipment:-Dynamic Waterjet XD 3D cutting technology, up to 60° head movement:-PASER 4 abrasive cutting system:-Abrasive storage hopper, capacity approx. 285 kg:-Premium stainless steel catcher tank with water level control:-CleanCut material support system:-Flow Shields splash protection:-Safety ligh ...

Container rotator, boiler rotator, welding rotator, welding rotator, welding device, welding turntable, welding rotator -Manufacturer: M.Heitze / Deuma Heitze, Container rotating device, welding rotating device type 405/0 -Load capacity: kg -Roller spacing: 240 - 780 mm -Rollers: Ø 185 x 105 mm -Rolling speed: 0.15 to 0.70 m/min Right/Left rotation -Control unit: with foot switch -Individual components: see photos -Transport dimensions: 1160/920/H785 mm / 600/540/H785 mm -Weight: 411 kg / 221 kg

General SKUCY002 LocationBarneveld CEcheck MakeFlottweg Main Features MaterialStainless steel Capacity1500 Ltr./Hr. Motor7.5 KW Specified Features - Decanter Decantercheck 2-Phase decantercheck Screw diameter250 mm Screw length750 mm Inlet25 mm Liquid outlet15 mm Solids outlet120 x 300 mm Motor7.5 kW (460 V, 60 Hz) Max. rotor speed6000 rpm MaterialStainless steel 1.4462 (318LN) General TypeZ23-3/401 No.002.100.07 Year of construction2002 With switchcheck With switchgear( as is) Floor space1,4 m x 1,5 m Total height1,9 m Weight900 kgConsumer wasteStarchBiotechnologyAgrochemicalsPlastic & polymersDecantersCatalysts & fillersPaper & otherOrganicsE-waste & metalAnimal feedDyes & pigmentsPlastic & rubberMinerals & inorganicFlottwegIndustries > Recycling > Consumer wasteIndustries > Food & Feed > StarchIndustries > Chemical > BiotechnologyIndustries > Chemical > Ag ...

X=3700mm Y=1440mm, Z=150mm Moving speed: X: 80 m/min, Y: 80 m/min, Z: 20 m/min 8 supports with vacuum cups, pneumatic clamping 8 fences at the rear 8 fences in front 2 left fences and 2 right fences 6 rails for panel loading with pneumatic lifting Positioning the vacuum cups using a laser 1 connection for templates Vacuum pump with flow rate 100 m3/h Configuration V25,H8X/6Y, N1 X-Y 90°, F1-HSK63-15KW,F1-HSK63-9KW, C axis, W14 rear Main motor 15 kW, 1250-24000 rpm, air-cooled, 360° C-axis, C-axis interpolation axis, HSK 63 mounting C axis extension for flex-5 aggregate Main motor 9 kW, 1250-24000 rpm, air cooled, HSK 63 mounting Tool changer operating in X direction with 14 positions, rear mounted 2 x 4 vertical X drilling pins, 2 x 3 vertical Y drilling pins 14 horizontal drilling spindles 90° groove saw X-Y direction PC 85 power control software with: Woodwop: workshop-oriented prog ...

Sistema de alimentación Sistema de rotor de aire / alimentación por rotor de succión Tamaño máximo/Minimo de hoja: 320 × 630 mm/125 × 128 mm Formatos estándar admitidos A3 / B4 / A4 / B5 / 11" × 17" / 8,5" × 14" / 8,5" × 11" / 5,5" × 8,5" Gramaje – papel normal 52–157 g/m², papel estucado 73–157 g/m² Altura máxima de pila en alimentador 105 mm Capacidad indicada del alimentador Hasta 1.300 hojas de 64 g/m² Velocidad de producción A3 270 hojas/min en plegado simple, A4 390 hojas/min en plegado simple Ajuste de velocidad 5 niveles Número de bolsas de plegado 2 Ajuste fino del plegado En incrementos de 0,1 mm Memoria de trabajos Hasta 20 trabajos Capacidad máxima de recepción Hasta 1.000 hojas Alimentación eléctrica Monofásica 115–120 V, 50/60 Hz o 230 V, 50/60 Hz Dimensiones y peso PF-40L 1.560 × 630 × 770 mm (An × Pr × Al), 135 kg

CONTROLS   CNC controls HELLER UNI-PRO CNC 90 WORKING RANGE -CUBIC-   number of processing axes (excl parallel axes): 4   X-axis travel: 1250 mm   Y-axis travel: 1000 mm   Z-axis travel: 1250 mm TABLE   table surface (left-right): 1000 mm   table surface (front-back): 800 mm SPINDLE / HEAD   tool fixture: ISO SK 50 AUTOMATIC WORKLOAD EQUIPMENT   store type: pallet changer   number of store positions: 2 DIMENSIONS / WEIGHTS   total weight approx.: 26500 kg ATTACHMENTS   European CE standards: yes Machine in very good condition. Dismantled Still available for sale: HELLER MCP-H 250 HS 1997 DECKEL MAHO FP5-80 1994 HELLER MCP-H 200 1998

Compact roll line KÖNIG / LIPPELT, type: G 2000 -In bakery condition- For Kaiser rolls, long rolls, hot dog rolls, and normal round rolls. - Mini Rex 4000 TR/G head machine - Weight range: 35 - 85 g - Knitting drums: SKG58 and RK58 (for softer doughs) - Capacity head machine: max. 4,000 pcs./h - Proofer capacity: max. 2,500 pcs./h - Condition: Good - Ready for immediate use Visits and test runs are possible by arrangement.

We sell 3 used TIG welding machines from Fronius. Fronius Magic Wave 4000 Job G/F The devices are without accessories.

Platform trolley, transport trolley, heavy-duty trolley, table trolley, assembly trolley, industrial trailer, container dolly, heavy-duty trailer -Heavy-duty transport wagon: with single-axle steering -Platform: 4000 x 1195 mm -Height: 395 mm -Load capacity: 3 t -Tires: Solid rubber tires 405 x 305 x 65, see photos -Overall dimensions: 5500/1195/H395 mm -Weight: 420 kg

Drying oven, drying cabinet, chamber dryer oven, preheating oven, heating chamber, drying oven, drying cabinet, drying and heating cabinet, universal oven -Manufacturer: Delair, Drying cabinet universal oven type SPX ED-400-TC -Usable space: 500/4070/525 mm -Heating power: 2000 W -Nominal temperature: 50 - 300°C -Voltage: 230 V -Dimensions: 760/720/H915 mm -Weight: 87 kg

Compressor, compressor brand Bitzer, type 4EC-6.2Y-40S made of refrigeration Merk with control cabinet, 7pcs compressor or complete refrigeration system with control cabinet, 100 kW for sale

Key data: 400 t, 120 1/min

Müller Weingarten Punching Machines Type. HQR 400.25 with Schuler conveyor system.

KEKEISEN PFW-T 4000/12 portal milling machine in a heavy, rigid design for machining large and heavy workpieces. Travel paths of 4,000 x 2,700 x 1,200 mm and a large worktable of approximately 4,000 x 1,800 mm with a table load capacity of 10,000 kg enable the machining of large-volume components. The machine is equipped with a universal milling head with 2 swivel axes and 5 - 1 degree steps NC controlled - adjustable positions (manually or optionally NC-controlled). Hirth gearing ensures precise angle settings. Powerful main spindle drive with approximately 30 kW. Speed range 20 – 7,000 rpm, maximum torque of approximately 1050 Nm. Additional equipment includes a 60-tool changer (KWE60), Chip conveyor, KNOLL filtration system, Hydac cooling units, and central lubrication. Feed rate up to 4 m/min, rapid traverse up to 18 m/min, and feed forces of approximately 30,000 N per a ...

x-travel: 650 mm y-travel: 650 mm z-travel: 680 mm rotary table tiltable: 360 Grad Number of working hours: 55.000 h tool taper: HSK 63 spindle turning speed range: 20.000 U/min max. torque on the spindle: 85 table-size: 400 x 500 mm table load: 0,5 t 4-axis machine Chain-type tool magazine: 60 positions Chip conveyor Pallet changer Coolant filtration system High-pressure coolant through the spindle The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.