ne used for sale

Manufacturer: Pilz Netzteil C-P8-NT- Netzteil 110/220 Volt, Type: 50-60 Hz, Model: 110 -220 Volt,

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

We offer you used warehouse stage. Technical data of offered stock stage: It is possible to run a stock stage in the following composition: 7 x 7m Large quantity available! Height the camp stage 4, 75 m -Load capacity 500kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm Please contact us in connection. Price for 1 m² - â?¬89 NET / sqm plus Assembly min. order 100 m². For smaller requests, we reserve the right to charge the price otherwise. Prices are net, plus statutory VAT. On request, we can organise transport. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. Before you click buy, you record please contact with us, to confirm the availability of t ...

We offer you used warehouse stage. Technical data of offered camp stage of Nedcon: It is possible to run a stock stage in the following composition: Possible column spacing: 4 m x 4 m, 5 m x 5 m. Height 3895 mm incl. gratings Höhne 3845 mm only with Sigma -Load capacity 300kg / sqm -Base plate which is made of non-slip plate, thickness of the base plate 40 mm -Project prepared according to customer needs. Price for bearing stage only on request available. Please contact us in connection. Price for 1 m² - â?¬70 NET / sqm plus Assembly Prices are net, plus statutory VAT. On request, we can arrange transport throughout Europe. After entering your postcode we will charge you the delivery charge We offer a professional fitting. Mistakes and intermediate sale is reserved! Offer valid until stock lasts. It's used goods. Before you ...

Hydraulic balancing act with cooling and tank (0.70 cbm) Motor 37 kW, filter, pressure vessel, etc...

Eccentric spiral pump NETZSCH NE80A 15-20 to/h used - in very good condition! UNI-ALTD Capacity: approx. 15-20 t/h Year: 1984 Type: NE80A Flange: 1 x DN 120 1 x DN 150 Comment: the pump is tested, 100% functions guarantee! Measurements: Length: 2030 mm Width: 600 mm Height: 1300 mm

Manufacturer: Biesse Rover A Nesting, Type: Rover A Nesting, Year: 2020, Control: Biesse, Working range X: 3140, Working range Y-axis: 1580, Working range Z: 230, C axis: yes, Number of milling spindles: 1, Number of milling spindles vertical: 1, Milling engine 1 hours power: 12, rpm 1): 1800-2400, Number of tool changers: 1, Tellerwechseler: 12, Mitfahrender Werkzeugwechsler: yes, Vacuum pumps m³/h: 120, Saw unit: yes, Portal machine: yes, Werkstückspannsystem: Vakuum, machine ready for demonstration: yes, Automatic setting up table: yes, Charging system single-sided: Hubtisch, FREE TEXT: Entladeband + zusätzlicher Werkstückreinigung/genaue Maschinentechnik kommt noch, Year :2020

Used eccentric screw pump Nemo pump unit 4NE15A Built: 1997 Design: IMB3 Power: 0.75 KW Voltage: 230/400 V Speed: 624 rpm Machine No.: 284285 Direction of rotation: to the left, seen on drive shaft

Make: Netzsch Type: NES 30A No.: 40500562 / 01 Machinenr.: 255281 Year of construction: 1994 very good condition Gear: Stöber Type: C002N-0041-D90 L4 No.: 1088609 n = 330 min-1 Engine make: DIEZ Power: 1, 5kW Dimensions: LWH = 1300x250x270mm Weight: approx. 80 kg 2. Pump: identical, but with an off switch and adapter onto screw approx. 50 l Total height: 900 with funnel

Newman Model S-282-18" Double-Sided Helical Head Planer Listing Type: Machine for Sale Category: Planers-Double Manufacturer: Newman Model: S-282-18" Double-Sided Planer Year: 1994 Electrical Specs: 3PH Price: $22,500.00 negotiable Type: Used Condition:Very Good Location: Lockport, New York 14094 USA Phone: 716 433 4224 Description: - Material Capacity: 18" Wide x 6" Thick - Shortest Stock (not butted) 48" - Top Head: 40 HP 3,600 RPM Direct Drive - Bottom Head: 25 HP 3,600 RPM Direct Drive - 15 HP Hydraulic Power Unit for Top Infeed & Outfeed rolls - Infinitely Variable Speed Feed Control from 40 - 150 FPM - Newman Six-Row "Quiet Cut" Helical Carbide Cutter heads - Feed Works Consist of Two Pivot Mounted Top Feed Rolls - Top head Chip breaker with 3" - Sections and Independent Yield of 1-1/2" - Air Operated Pressure Bar - Top Head Power Hoist - Automatic C ...

Name: Netzsch Nemo pump used Manufacturer: Netzsch Type: NM031BY04S24B Year of construction: 2006 Material: Normal steel Drive motor: 3 kW operating temperature: 20 C Dimensions: L 1700 x W 300 x H 500mm Empty weight: 150 kg Speed: 79-262-719 rpm Flow rate: 0.2 - 1-3 m3/h Operating voltage: 400 / 690 V Protection class: 55 Flanges: DN 65 Condition: Used Tech. Documentation: No Price: On request

For sale is a used progressing cavity pump from the renowned manufacturer NETZSCH, model Nemo NM076BY03S18B. The pump is ideal for demanding conveying tasks in industry and is immediately ready for use. Specifications: Manufacturer: NETZSCH Pumpen & Systeme GmbH Type: NM076BY03S18B Type: Progressing cavity pump with substructure and drive Flow rate: min. 4 m³/h max. 35 m³/h Differential pressure: min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF Price on request Location: 23775 Großenbrode, Germany

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

Pump with substructure and drive Flow rate min. 10 m³/h max. 70 m³/h Differential pressure min. 4.9 bar max. 0.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Stator Bolt Material: Galvanized Steel Geared Motor North, Type SK52-160LP/4-F(VL) TF F

Progressing cavity pump with substructure and drive Flow rate min. 4 m³/h max. 35 m³/h Differential pressure min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF

Nestro Dust Collector NE 250J ECO Nominal volume flow 2,950m³/h Nominal Volume Flow Vacuum 2.526Pa 5.5Kw Filter area: 22.4m² Outrigger: 250mm

General SKU221Y083 MakeNetzsch SerialD4095257/6300005469/0100 Main Features MaterialStainless steel Volume50 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump MaterialStainless steel Eccentric Screw Pumps Pumpcheck Number of pumps:1 Capacity50-80 l/h With motor0,75 kW (400 V 1415 rpm (215 rpm)) InletDN25 OutletDN25 Magento base g_extra_specificationsNetsch Nemo pump 9-312 l/min , 0,23 kW Information Year of construction2021 LocationBarneveldEccentric Screw PumpsNetzschPumps > Eccentric Screw PumpsBrand > Netzsch What you can expect from Foeth: -- Machine is in working condition -- At a reduced price compared to new -- Ready for shipping to any destination worldwide -- You are welcome to inspect the machine in Barneveld, The Netherlands. Please visit us in Barneveld for many more machines!

Neolt NeoWeld is the series of pulse welding machines designed to meet the production needs of sign-makers and professionals in the digital printing, indoor/outdoor advertising and POS communication. The welding pulse technology choosed for NeoWeld stands as a substantial alternative to the high-frequency, ultrasonic and hot air technologies, offering a number of indisputable advantages from the technical, operational, economical and dimensional point of view. ? Heating length about: 1300mm ? Heating width about: 25 mm ? Working pressure: 220 kg./cm ? Electrode temperature: from 70° to 250° C ? Air pressure: 7/8 Bar ? Dimensions: L1500 x W1300 x H1400mm. ? Machine Weight: 433 Kg. / 954,6 Lbs. ? Height of work table: 1000 mm. ? Power: 400V 50/60Hz ? Power supply: 400V 50/60Hz ? Consumption: about 6 kW. plug CEE (red) 16A 3P+T 400V 50/60Hz ? Power supply: 220/240V 50/60Hz ? Consumption:  ...

6 STANDS ROD FINISHING BLOCK WITH 3 UPPER & 3 LOWER UNITS IN A V-SHAPE 170 MM DIAMETER DISCS TO PRODUCE DIA. RODS OF 5.5 TO 12 MM, 60 M/SEC.,

Description Filter Hose for Alko Mobil Jet 140 to 300 Material: Polyester, BIA Cat: M, antistatic, Weight 460 g/m² We manufacture every filter size! Prices, delivery times and payment terms on request. Telephone advice at: 05656-9239404

intake connection: 200mm; Maximum volume flow: 3200 m³/h; nominal volume flow: 2862 m³/h; volume flow: Differential pressure indicator; Vacuum: 2336 pa; filter area: 16,8 m²; Residual dust content: smaller 0,2 mg/m³; SPL: db; chip bag volume: l; filter regeneration: pneumatic; motor power: 4 kW; machine length: 2300 mm; machine width: 900 mm; machine height: 2200 mm; weight: 350 kg;

Four Neff single-column presses are available. 1) Neff T 6.3, year of manufacture: 1989, output: 3kW. 2) Neff single-column press, operating hours: 9097h. 3) Neff EP 10 single-column press, year of manufacture: approx. 1950. 4) Neff single-column press. On-site inspection is possible.

VWS Nederland – Top/Base Labeling Machine (R → L), Manufacturer: VWS Nederland, Type: Top / Base Labeling Machine (Right → Left), Year of manufacture: 2017, Description, The VWS Nederland Top/Base Labeling Machine is designed for automatic labeling of products on both the top and bottom sides. The system operates from right to left (R → L) and is suitable for integration into automated packaging and production lines., This labeling system is commonly used in the food, pharmaceutical, and consumer goods industries where accurate and consistent label placement is required., Technical Specifications, - Manufacturer: VWS Nederland, - Machine type: Top and bottom labeling machine, - Labeling direction: Right → Left (R → L), - Label positions: Top and base (bottom), - Year of manufacture: 2017, - Application: Automatic labeling of trays, containers, and packaged products, - Integra ...

NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 d ...

Delta New Poluclean P30 Dust Extraction System Delta New Poluclean P30 Dust extraction system 400 V 5.5 kW 3500 m³/h 95 liters Weight: 361 kg Metrics: HxWxD = 300 x 100 x 97 cm Item location: 42859 Remscheid Dismantling and transport by the buyer. The dismantling, loading, as well as transport can alternatively be offered by us. Further extraction systems in other sizes - new and used - can be found in our shop! International shipping costs on request!

Nederman 30S Industrial Vacuum Cleaner – Used, Tested & Ready to Use - Top Condition! For sale is a powerful Nederman 30S industrial vacuum cleaner, ideal for workshops, production, construction and industrial use. Specifications: • Model: 30S • Year of construction: 2015 • Voltage: 400 V / 3 phases • Power: 3.0 KW, 400 V, 50 Hz, 2800 rpm, 3 phases, 6.8 A, Iso F, S1, IP55 • Container volume: approx. 50 litres • Negative pressure -230 mbar, overpressure 245 mbar • Weight: approx. 90 kg • Condition: used, fully functional Scope of delivery: • Nederman 30S vacuum cleaner •Hose • Original chassis Condition: The device has been tested – motor runs smoothly and powerfully. Filters and containers were cleaned. Shipping / Pickup: • Pick-up preferred (heavy equipment) • Shipping by forwarding agent possible by arrangement • Locati ...

video control station The VCPevo / VCP Evolution (often written VCPevolution”) is a fully automatic register punching & bending system for printing plates (offset printing) built by NELA. VCP” stands for: Video‐recognition of register marks (V) + Controlling via CCD image processing (C) + Positioning by stepping motor control (P) — as one brochure puts it. The machine is used in the pre‐press / printing-plate automation sector: it aligns exposed printing plates, punches the register holes, bends the plates (to the correct angle) in one cycle. The VCPevolution line is described as the new generation” of the VCP series, aimed at high precision, high throughput, integration into automation / plate sorting lines. According to NELA’s product page for VCP, the machine is available in different models and can easily be integrated into any automation solution.” nela.de Fin ...

Drilling unit / profile drilling machine Alzmetall AC32, drill head. The maintenance work includes: new disc spring set in the drill head (11/2025), new servo motor for speed adjustment (09/2025), new disc set for shaft 2 (approx. 09/2023) and a complete belt replacement (11/2024). Note: V ribbed belt is 1.4mm before the wear limit. Inspection by appointment possible.

A textile washing machine and a textile dryer, both from the manufacturer Nexia, are available. 1) Textile washing machine Nexia LC 55, year of manufacture: 2018, connected load: 9kW, heating medium: steam, max. steam pressure: 4.5bar, drum speed: 829rpm, max. batch weight: 55kg, drum diameter: 977mm, drum depth: 753mm, drum volume: 565l, machine weight: approx. 1700kg. 2) Textile dryer Nexia 55S, year of manufacture: 2018, connected load: 2.2kW, drum speed: 25rpm, drum volume: 1085l, drum diameter: 1200mm, max. batch weight: 36kg, heating type: steam, machine weight: approx. 800kg. Documentation available. An on-site inspection is possible.

Nederman Dust Collector / Silo Dust Collector with Control and Compressed Air Treatment Manufacturer: Nederman Type: DFC-08M Item number: 5512680 Year of manufacture: 2023 Manufacturer of pressure vessels: RECO Gesellschaft für Industriefilterregelung mbH Type: ST148-DN25-2V-8P Year of manufacture: 2023 Serial Number: FA1049979-003 Maximum permissible pressure: 7 bar Permissible temperature: -20°C to 85°C Volume: 7.3 L Fluid group: 2 Pressure Test Date: 2023-05 Control cabinet: Rittal AE 1010.600 Year of manufacture: 2023 Control: Nederman DFC-08M Controller Compressed air treatment: Camozzi MC202-D00 Max. inlet pressure: 16 bar Outlet pressure: 0.5–10 bar Max. temperature: 50°C Electrical Components: ABB Control/Connector Housing Design: Dedusting system for silo applications with integrated filter unit and fan Accessories / Scope of delivery ...

23 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -24 stand / 64 traverses -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à l ...

95 fields pallets shelving (used) -Various manufacturers such as Polypal, Dexion, Metalux, Jungheinrich, Torri, Metasistem, and others -Used pallet racks note 1.5 -96 stand / 256 beams -Truss length 2.70 m (optional 3,60 m on request) -Load per level 2.4 tons -Shelf height 3.00 m deep 1.00 1.10 m -Disassembled and ready for loading -Safety pins -Load signs On request are surcharge ground anchor and Pad material offered. Attention: It is to used goods. Partial Signs of wear, but no security relevant dents like Stand driven to or Trussing! The magazine planners are careful to create only top quality / to put together. Should the above offer do not meet your needs, we create happy at short notice in writing (pdf. via mail) a quote if necessary including transport costs. For this, we need only your exact address or delivery address. See: your desired shelf there's also à la ca ...

25 lfm pallet shelf Nedcon New goods, see pictures! A top shelving system from the large manufacturer NEDCON- this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 3.5 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg, Negotiated price: € 1,680,-- net from stock Offer consists of: + 10 pcs pre-assembled frame, depth 110 cm, height 3.5 m + 36 pcs. carrier, length 2.7 m, 3050 kg load/compartment + 72 pcs mount fuses + 20 pcs concrete anchors Load sign documents, etc. are a matter of course. Further accessories can be found in the accessory catalogue. Frame blue RAL 5019, galvanizing inlinations. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Wearer orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. ...

We offer you 10 used safety pins from the manufacturer Nedcon for sale. - incl. shipping throughout Germany - Technical data for the locking pin: Shelving system: Nedcon Type: AS Included are: 10x Safety pins, used Material color: complete. galvanized Weight: 0.022 Kg / pcs. To secure the longitudinal beams Against unintentional lifting Our services at a glance: (Prices on request) Assembly, assembly our general assembly conditions must be observed Shelf inspection Shelf inspection carried out in accordance with DIN EN 15635 in accordance with the Requirements of the BGR 234 visual inspection for all shelving systems Delivery with our own fleet (without discharge)

50 lfm pallet rack Nedcon New, see pictures! A top shelving system from the large manufacturer NEDCON - this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 7 m Depth 110 cm, blue Carrier length 2.7 m orange Carrier with load /compartment 3050 kg Negotiation price: € 8.750,-- net from stock Offer consists of: + 19 st. frame pre-assembled, depth 110 cm, height 7 m +144 st. girder, length 2.7 m, 3050 kg load/compartment +288 St. Suspension fuses + 38 concrete anchors Payload signs documents etc. are self-evident. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher field loads possible on request. Carrier orange RAL 2008. Carrier lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock. Transport and  ...

Neri/Marchesini/Garvens/Multipack labelling & packing line for round plastic bottles consisting of: Bottle infeed table, Neri SL 400 self-adhesive labelling machine for bottles, etc., suitable for containers with a diameter from 15 to 80 mm, label height from 10 to 120 mm, conveyor width 80 mm, capacity up to 220 bottles per minute, bottle outfeed table used as a buffer, Cognex camera inspection of the print of the variable data (batch no., expiry date, etc.) on the labels, Marchesini MA155 horizontal cartoner, continuous motion, carton size range: A: 25 – 100 mm, B: 15 – 85 mm, H: 65 – 190 mm, capacity up to 140 cartons per minute, GUK leaflet folder from stack, bar code reader for leaflet, carton and presence of leaflet in the carton, Garvens S2 inline checkweigher with reject device and reject container, weighing range up to 300g, Multipack F40 collator & stretch bander for car ...

Plate punch HD/Nela SM 52; good condition; cleaned and tested; Table equipment; Punching 425mm Autoplate. Plate punch HD/Nela SM 52; good condition; cleaned and checked; table top machine; punch size 425mm autoplate.

Nestro ATEX - Rotary valve Product Name: Rotary Valve Type: 371004 Manufacturer: Nestro Lufttechnik Serial Number: SA0000427 Year of construction: 2022 Condition: used and refurbished Technical details: - new gear oil - New ATEX rotary sealing lips - new colour scheme - Refurbished housing - V nominal: 45 m³/h - Dimensions (L x W x H): 1,870 x 630 x 360 mm - Inlet and discharge opening (L x W): 1,500 x 300 mm - Transport dimensions (L x W x H): 1,870 x 800 x 510 mm (on pallet) - Weight: 165 kg (185 kg on pallet) Engine data: - Voltage: 230/400 V - Current: 4.25/2.45 A - Frequency: 50 Hz - Power: 1.1 kW - cos φ: 0.79 - Torque: 600 Nm - Speed: 1,412/12 rpm Price: on request (Subject to changes and errors regarding technical data and prices!) In accordance with our terms and conditions, we would like to point out once again that cheques and bills of e ...

Pallet rack 5m high, Nedcon, 1.000kg / pallet, approx. 720 storage spaces - used - : Price: 21.250.- € (net) incl. delivery within Germany (without islands)! Example configuration – other configurations like unverb. on request! Price per frame: 146,50 € (net) Price per truss: 29.-€ Accessories: Price per corner bumper 90 degrees: 55.-€ (net) Price per post collision protection: 14.-€ (net) Manufacturer: Nedcon Type: Pallet Rack Year of manufacture: current new product Shelf load: 3,000kg Max. pallet weight: 1,000kg Max. usable bay load: 9,000kg (other bay loads on request) Frame Quantity: 66 pieces Frame height: 5m (other frame heights up to 7.50m available at short notice) Frame depth: 1.10m Frame bracing: screwed (frames are not delivered pre-assembled) Trusses Quantity: 360 pieces Clear width: 2.70m (also available in 1.80m and 3.60m) Inc ...

Nestro briquetting press BP 1101 - with daily storage tank and discharge Product name: Briquetting press Type: BP1101 / 710045 Manufacturer: Nestro Machine number: 64637 Year of construction: 1992 Condition: used, functional, cleaned The briquetting press consists of four components: 1. Pressing unit mounted on the base frame 2. Daily storage container 3. Control cabinet 4. Hydraulic unit with motor and pump technical details: Motor power: 7.5 kW Voltage: 380 V / 50Hz Current: 16.5 A Rotation: 1,440 rpm Operating hours: 5,390 hydraulic tank oil pump: 170 l Briquetting capacity: approx. 70-90 kg/h - Articulated arm discharge in the daily storage container - Daily storage tank with connection nozzle 350 mm diameter Container dimensions (L x W x H): 2,400 x 2,400 x 1,600 mm Installation dimensions with metal pedestal (L x W x H): 2,600 x 2,600 x 2,350 mm  ...

Nema NCG 4390 S Thermal Shock Chamber -40°C to +180°C Manufacturer: Nema Type: NCG 4390 S Temp. range: -40°C to +180°C Dew point range: +5 °C to +89 °C Mains voltage: 400 V Rated current: 32 A Nominal power: 15 kW Refrigerant: R 404 A Year of Make: 1999 Weight: 2720 kg External dimensions: W 3950 x D 1700 x H 2280 mm Chamber: W 3000 x D 1300 x H 1170 mm WLG DAMPF-O-MAT Electro-automatic steam humidifier and producer of mineral and odour-free steam Manufacturer: WLG DAMPF-O-MAT Type: EDB 8 Heating voltage: 400 V Power: 6 kW Steam volume: 8 kg/h Water-cooled condenser Manufacturer: Bitzer Water-cooled Mains voltage: 400 V Rated current: 13 A Nominal power: 4 kW Refrigerant: R 404 A Weight: 145 kg KK-08 More items - new and used - can be found in our shop! International shipping costs on request!

Separator lock / rotary valve Nestro, built in 2012, for the separation / differentiation of paper chips or paper edge sections Specifications: Manufacturer: Nestro Lufttechnik GmbH Year of construction: approx. 2012 Motor: 4 kW Volume flow max. 28000 m³/h Diameter inlet max.: 450 mm Speed: 22 rpm Rotor width: 1500 mm Rotor diameter: 1200 mm Dimensions: 2200 x 2200 x 2500 mm (LxWxH) Weight: approx. 3000 kg Remark: The machine is in good condition. It was inspected and tested by us in 28816 Stuhr. You can find the video on our website or our Youtube channel. Viewings, also under power, are possible at any time by arrangement. We will also be happy to answer any questions you may have about the machine by phone from Monday to Thursday from 08.00 to 14.00 h. On Friday we are there for you from 08.00 to 13.00 h. Please note: All technical data refer to the manufac ...

Fine mill / impact disc mill Grinding disk diameter: 800 mm Drive: 90 kW new machine Scope of application: NEUE HERBOLD Impact Disc Mills of the ZM series are fast-running fine mills for pulverizing brittle, medium-hard or impact-resistant materials and granules. Typical application is the fine grinding of H-PVC / PE / PC / etc. Impact Disc Mills from the NEUE HERBOLD process e.g.: - Pipe and profile regrind from extrusion - Pre-shredded panel and edge strip waste - slides - Amorphous and brittle products from the areas of the food industry, the chemistry and pharmacy

Precision planetary gearbox, i=8, PLFHP140-008-SSSE3AK-E38, Neugart, new Please note: This is an original Neugart product and not a replica from Special price If you have a VAT number, we will gladly issue you an invoice without VAT. New! The part was purchased from a company's spare parts warehouse, is in its original packaging, has never been used and is completely new. Drive side: Hollow shaft D 50 mm, centring 180 mm, pitch circle 215 mm, z=4, 6 months warranty We give you 6 months warranty for these goods from the date of invoice. In case of any defect, which is not the fault of the buyer, the goods can be returned. We will refund the buyer only the product price paid to us. Updating in case of digital components is excluded. Also excluded is liability for direct and indirect consequential damages. Our terms and conditions apply, see our website. Austrian law appl ...

150 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6 m Depth 110 cm, blue Beam length 2.7 m orange Rack with ballast /compartment 3050 kg Negotiation price: € 18.990,-- net from stock Offer consists of: + 55 pcs. frame pre-assembled, depth 110 cm, height 6 m +216 pcs. beam, length 2.7 m, 3050 kg ballast/compartment +432 pcs. Suspension locks +220 pcs Concrete Anchor Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock.  ...

300 m pallet rack Nedcon New goods, see pictures! A top shelving system from the major manufacturer NEDCON – this is a subsidiary of Voestalpine AG with headquarters in the Netherlands. Height 6.5 m Depth 110 cm, blue Beam length 2.7 m orange Carrier with ballast /compartment 3050 kg, Negotiation price: € 52.490,-- net from stock Offer consists of: + 126 pcs. frame pre-assembled, depth 110 cm, height 6.5 m + 750 racks, length 2.7 m, 3050 kg ballast/compartment +1500 pcs Suspension locks + 504 pcs concrete anchors Load plates, documents, etc. are a matter of course. Further accessories can be found in the accessories catalogue. Frame blue RAL 5019, infills galvanized. 2 m to 7 m heights in stock. Field load 12 tons, higher bay loads possible on request. Carrier orange RAL 2008. Beam lengths: 1.85 m, 2.7 m, 3.3 m, 3.6 m in stock. Goods are in stock.  ...

134 pieces, Flank protection / Frame protection / Collision protection / Crash barrier for pallet racks, single and double rows, Nedcon - used - : Price ex location: 95.-€ / piece (net), dismantled, packed and loaded! Manufacturer: Nedcon Type: Set Flank protection sigma 135de Year of construction: 2016 / 2019 Type 1 (for single row): 6 units in stock Flank protection sigma 135° L=1100mm Set Flank protection sigma 135deg L=1100 Length: 120cm Height: 40cm Depth: approx. 22cm Weight: approx. 31kg Original price approx. 205.-€ (net) / piece Type 2 (for double rows): 124 Units in Stock Flank protection sigma 135° L=2400mm Set Flank protection sigma 135deg L=2400 Length: 243cm Height: 40cm Depth: approx. 22cm Weight: approx. 41kg Original price approx. 227.-€ (net) / piece Condition: good – very good Available: immediately Location: Augsburg

Nema Corrosion Test Chamber for Salt Spray Tests Manufacturer: Nema Type: NSN 300 Nominal voltage: 400 V Rated current: 11 A Compressed air: 8-10 bar Air consumption: 6 Nm³/h Humidifier: 0.5 l/h Water pressure: 2-8 bar Power consumption: 5.6 kW Brine: NaCl: 50 +- 5.6 kW External dimensions (WxDxH) 3200 x 1200 x 1900 mm Internal dimensions of the test chamber (WxDxH) 3100 x 1000 x 880 mm Weight: 390 kg More items in other sizes - new and used - can be found in our shop! International shipping costs on request!

This Netstal EVOS 5500-2900 Speed was manufactured in 2014. Ideal for high-speed plastic processing, it ensures efficient operations with its robust design. If you are looking to get high quality injection molding capabilities consider the Netstal EVOS 5500-2900 machine we have for sale. Contact us for more information.