ne used for sale

Hydraulic injection moulding machine manufactured in 2009. This Negri Bossi BM BIRAGHI SINTESI 100 features a clamping force of 1000 kN and an opening stroke of 370 mm. The machine has a platen size of 610 × 550 mm and a maximum mould height of 450 mm. If you are looking to get high-quality injection moulding capabilities, consider the Negri Bossi BM BIRAGHI SINTESI 100 machine we have for sale. Contact us for further details.

Size: Equipments: Speed: 4,300 cycles per hour Fold types: Letter, Single Fold, Zigzag Fold, Doub Job Memories: 20 Folding Capacity: 8 Sheets Document Feeder Capacity: 325 Sheets Maxi Feeder: 1,200 Sheets Envelope Capacity Hopper: 500 Envelopes Envelope Capacity Side Exit: 500 Envelopes Envelope Capacity Power Stacker: 500 Envelopes Set Thickness: 2.5mm Reverse Reading: Yes Cascade Feeding from all Feeders: Yes High Capacity Power Stacker: Yes Dimensions: Depth: 460mm, Height: 920mm, Length: 1 Dimensions: Weight: 140 Kg (6 Stations)

A monoblock high-performance dual-fuel burner Elco is available. Nominal output range (gas): 820kW-7340kW, nominal output range (oil): 1470kW-7340kW, gas connection pressure range: 70mbar-500mbar, fan power: 15kW, burner tube outer diameter: 415mm, machine dimensions X/Y/Z: approx. 2700mm/1450mm/1250mm. Documentation available. An on-site inspection is possible.

An industrial drying oven Biagosch & Brandau, which has been overhauled by Neitz, is available. Fuel: natural gas, calorific value: 7600kcal/Nm³, gas pressure: 200mm/Ws, fuel consumption: 2.75Nm³/h, operating temperature: 120°C, heating capacity: approx. 23.3kW/20000kcal/h. An on-site inspection is possible.

This 3-axis Mazak NEXUS 410A vertical machining centre was manufactured in 2006. It features an X-axis travel of 560 mm, Y-axis travel of 410 mm, and Z-axis travel of 510 mm. The machine has a maximum spindle speed of 12,000 rpm and a tool capacity of 30 tools. If you are looking to get high-quality machining capabilities, consider the Mazak NEXUS 410A machine we have for sale. Contact us for further details.

Manufacturer: NeoDen Model: IN8C Type of Machine : Reflow Oven - Heating zones: 8 total (4 upper / 4 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: 3.6 kW - Typical working power: approximately 1.5 kW - Machine dimensions: 1660 x 607 x 1075 mm (L x W x H) - Net weight: 241 kg - Gross weight: 308 kg Standard Accessories Included - ...

Absolutely new belt dryer make New Eco Tec Woody 500-100-1.0 SP, built in 2019. Very well preserved, as good as new facility. Immediately available. Suitable for drying fines up to 1.5 to/h. Input moisture up to 50%. Water evaporation up to 500 kg/h! Heating medium warm air 90°C to 110°C. Takeover possible immediately!

Manufacturer: NeoDen Model: IN12C Type of Machine : Reflow Oven Technical Specifications -Heating zones: 12 total (6 upper / 6 lower) - Cooling fan: upper 4 - Controller: VGUS Microcomputer - Transmission: guide rails drive - Heating type: nichrome wire and aluminum alloy heating - Conveyor speed: 50 to 600 mm/min - Temperature range: room temperature up to 300 degrees C - Temperature accuracy: +/- 1 degree C - PCB temperature deviation: +/- 2 degrees C - Maximum soldering width (PCB width): 300 mm - Maximum soldering height: 30 mm upper / 15 mm lower - Length process chamber: 1354 mm - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Power supply: AC 220 V, single phase - Starting power: approximately 4.8 kW - Typical working power: approximately 2.2 kW - Machine dimensions: 2300 x 650 x 1280 mm (L x W x H) - Net weight: 300 kg - Gross weight: ...

Key data: 1000 kN, 40 mm

Year: 1994 Clamping Force: 100T Screw Diameter: 40mm L/D Ratio: 20 Mold Opening Stroke: 150 x 410 mm Mold Thickness: 150 x 450 mm Platen Dimensions: 590 x 690 mm Distance Between tiebar: 400 x 400 mm Maximum Pressure on Material: 1715 bar Injectable Volume: 302cc Weight: 4170kg Dimensions: 4805 x 1015 x 2065 mm

Manufacturer: NeoDen Model: YS350 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 400x240 mm - Printing area: 500x320 mm - PCB fixed system: pin positioning - Frame size: L 550-650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 230 kg - Gross weight: 280 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine throt ...

Key data: 1068 KW, 1335 kVA, 400 V

For sale is a Newage generator with the serial number A12H327489. This generator was coupled with a Jenbacher 320 engine with the design number O988. The generator delivers an output of 1335 kVA at an output voltage of 400 V. It was manufactured in 2012. The price for this powerful and hardly used generator is 7,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

The ND56X is designed for R&D; enterprises, laboratories, and quality inspection rooms. It is a fully automatic defect inspection system suitable for a wide range electronic components and precision parts. CE certified and compliant with SEMI S2/S8 semiconductor industry specifications. X-Ray Tube Source Specifications - Type: sealed micro-focus X-ray tube - Voltage range: 40 to 90 kV - Current range: 10 to 200 uA - Maximum output power: 8 W - Micro focus spot size: 15 um Flat Panel Detector Specifications - Type: TFT Industrial Dynamic Flat Panel Detector (FPD) - Pixel matrix: 768x768 to 1536x1536 - Field of view: 65x65 to 130x130 mm - Resolution: 5.8 Lp/mm - Frame rate (1x1): 20 to 40 fps - A/D conversion: 16 bits Key Features and Functions - Automatic defect detection: size, area, broken wire, bridging and more - Customizable software algorithms: Y/N, crack, broken wir ...

Manufacturer: NeoDen Model: YS600 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 600x240 mm - Printing area: 700x320 mm - PCB fixed system: pin positioning - Frame size: L 750-850 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 900x700x1700 mm (L x W x H) - Net weight: 265 kg - Gross weight: 310 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine throt ...

Manufacturer: NeoDen Model: N10P Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 8 (fully closed-loop control system) - Maximum placement speed: 20,000 CPH - Position accuracy: +/- 0.01 mm - Camera configuration: dual mark camera + front flying camera + IC camera - Component range (flying camera): 0201 to 22x22 mm - Component range (IC camera): 0201 to 40x40 mm - Maximum component height: 16 mm - PCB size minimum: 50x50 mm - PCB size maximum (without IC tray): 450x1500 mm - PCB size maximum (with IC tray): 395x1500 mm - PCB thickness: 0.2 mm to 3.5 mm - Feeder capacity (tape and reel): 80 positions (33 front + 47 rear) - IC tray feeder: 1 - Automatic nozzle change: yes, 39 nozzle positions - Support pins to hold PCB: optional - Power: 600 W, single phase, 220V/110V, 50Hz/60Hz - Air source: 0.6 to 0.8 MPa  ...

Manufacturer: NeoDen Model: YS1200 Year of Manufacture: 2026 Type of Machine : Semi-Automatic Stencil Solder Printer Application: Belong to SMT Machines,use to do solder paste apply to PCB surface Technical Specifications - Maximum PCB size: 1200x240 mm - Printing area: 1300x320 mm - PCB fixed system: pin positioning - Frame size: L 1550-1650 mm x W 370-470 mm - Table adjustment: front/rear +/- 10 mm, left/right +/- 10 mm - Printing accuracy: +/- 0.2 mm - Repeating accuracy: +/- 0.2 mm - PCB thickness: 0.2 mm to 2.0 mm - Air source: 4 to 6 kg/cm2 - Power supply: AC 220V, 50Hz - Machine dimensions: 1600x700x1700 mm (L x W x H) - Net weight: 300 kg - Gross weight: 350 kg Key Features and Highlights - Precision motor and linear rail system for stable and accurate scraper printing - Double scraper printing with independent pressure control per scraper, with cylinder fine ...

Manufacturer: NeoDen Model: YY1 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Machine style: single gantry with 2 heads - Alignment: vision and vacuum - Placement rate (vision on): 3,000 CPH - Placement rate (vision off): 4,000 CPH - Feeder capacity - tape feeder: 52 positions (all 8mm) - Feeder capacity - stick feeder: 4 - Feeder capacity - flexible feeder: 28 - Feeder capacity - bulk feeder: 19 - Nozzle change capacity: 3 nozzles - Component range - smallest: 0201 - Component range - largest: 18x18 mm - Maximum component height: 12 mm - Rotation: +/- 180 degrees - Placement accuracy: +/- 0.02 mm - X-Y repeatability: +/- 0.02 mm - Z-axis maximum movement range: 28 mm - PCB size maximum (dual sides tape feeder): 249x350 mm - PCB size maximum (single side tape feeder): 315x350 mm - Electricity supply: AC 100V to 240V  ...

General SKU042B298 LocationBarneveld MakeCINC - Costner Industries Nevada Corporation TypeModel V5-HPHT (High Pressure High Temp.) No.05HPHT01 Main Features MaterialStainless steel Motor5.5 KW Specified Features - Separator Separator:Centrifugal Separator: (1x) Motor/drive unit make Fluid, type MD-55.22 Max. rotor speed3600 Rpm Mounted on stainl. steel framecheck MaterialStainless steel 1.4404 (316L) General Year of construction2001 Floorspace0,6x0,6 M Total height1,7 M ATEX designedcheck Extra Specifications- Max. pressure 20 bar (test pressure 27,3 bar) - With jacket (I= 2,5 + 0,8 Ltr vacuum/16 bar, test pressure 22,1 bar) - Max. temperature 200 Degr. C. - Motor 5,5 KW, 400 Volt (Ex) - Capacity 6,5 Ltr - With mechanical sealOils & fatGeneric medicinesBiotechnologyFeed additivesDiscountCosmeticsFood additivesLubricants & oleoDairySolid pharmaceuticsBeveragesDyes & p ...

NeoDen4, the brand new and long-awaited model of NeoDen, is a desktop Pick and Place machine with vision system.NeoDen4 is with dual cameras, auto rails, auto electronic feeders and 4 placement heads, which could help to handle 0201, BGA, QFN and 0.8m/1.2m/1.5m LED strip.NeoDen4 is the best choice to satisfy all demands of high precision, high capacity,stable performance and low cost. Manufacturer: NeoDen Model: 4 Year of Manufacture: 2026 Type of Machine : Pick and Place Machine Technical Specifications - Number of heads: 4 (with vision enabled) - Placement rate: 4,000 CPH - Feeder capacity - tape reel feeders: 48 - Feeder capacity - vibrating feeders: 5 - IC tray capacity: 5 - Component range - smallest: 0201 - Component range - largest: TQFP240 - Maximum component height: 5 mm - Resolution X/Y axis: 0.01 mm - Resolution Z axis: 0.1 mm - Rotation: +/- 180 degrees (360 d ...

The NeoDen ND1 is a high-precision automatic SMT screen printer designed for professional PCB solder paste printing. With a repeat accuracy of +/- 12.5 micron at 6 sigma and Cp of 2.0 or greater, it delivers the precision and reliability demanded by high-quality electronics manufacturing. Manufacturer: NeoDen Model: ND1 Fully Automatic Vision Printing Machine Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.6 mm to 14 mm - Maximum PCB weight: 10 kg - Transmission speed: 1500 mm/second maximum - Template frame size: 370x470 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: closed-loop print head with straight line motor - Scraper type: steel or rubber scraper, angles 45 / 55 / 60 degrees - Scraper length: 220 mm to 500 mm - Scraper blade thicknes ...

Filterplate 600x600 stainless steel Material:  AISI 304 13mm complete with screws 2 plates with holes 2 sliding shous gaskets seperatly suitable for Seitz PALL Orion A60, B60 OEM Order number: Fs 50763

The NeoDen ND2 is an advanced SMT automatic screen printer designed for easy operation, high precision, and high stability PCB solder paste printing.With a repeat position accuracy of +/- 10.0 micron at 6 sigma and Cpk of 2.0 or greater, the ND2 delivers superior precision over its predecessor the ND1. Manufacturer: NeoDen Model: ND2 Fully Automatic Visual Printer Year of Manufacture: 2026 Type of Machine : Stencil Printer Technical Specifications - Maximum PCB size: 450x350 mm - Minimum PCB size: 50x50 mm - PCB thickness: 0.4 mm to 6 mm - Maximum PCB weight: 3 kg - Transmission speed: 1500 mm/s maximum - Transfer height from ground: 900 +/- 40 mm - Transfer direction: left-right, right-left, left-left, right-right - Template frame size: 470x370 mm to 737x737 mm - Maximum print area: 450x350 mm - Print head: floating intelligent printing head with two independent direct co ...

General SKU050Y334 MakeNetzsch Mastermix Aldridge TypePMD-200 Year of construction1992 Mounted on legscheck Pressure Working pressure0.4 Bar Vacuum possiblecheck Working pressure jacket2 Bar Main Features MaterialStainless steel Volume1230 Ltr. Motor55 KW Specified Features - Stirring vessel Closed stirring vessel:Polymer Preparation Mixer: (1x) Capacity1230 Ltr Vessel sizesdia. 1130x1250mm, Flat bottom Dished top sidecheck Manholedia. 300mm Top connections(6x) Outletdia. 85mm With jacket(150 Ltr) Max. temperaturejacket 95 Degr. C, Vessel 125 Degr. C. With anchor stirrer:scraper stirrer: Motor17,5 KW, 380 Volt (Ex) Speed mixing shaft15 Rpm With homogeniser:High speed disperser: hydraulic driven Motorhydraulic drive unit 55,0 KW, 380 Volt (Ex) MaterialStainless steel 1.4301 (304) With jacketcheck General LocationBarneveld ATEX designedcheck Extra Specifi ...

Find more here - .ucymachines/ Contact us at - sales@ucymachines

Engine Brand: STAMFORD, Conditie: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Grey , Turbo Type: None Mounted , Exhaust System: Not Mounted , ECU Present?: no , Injection Type: ECU (Electronic Control Unit) , Generator KVA: 1900 , Generator Hz: 50 , Generator Volts: 400/231 , Generator Amps: 2742.4 , Generator Fases: 3 Fases + Nul (4 totaal) , , https://www.hamofa.com/catalog/product/view/id/218851, , = More information =, , Empty weight: 2.500 kg, Type number: PI734E2 LOSSE GENERATOR 1900KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva -new/148, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva -new/297, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva /208, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva -new/162, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

This 3-axis DMG NEF 600 was manufactured in 2012. It features a turning length of 1200 mm and a powerful integrated spindle motor with a maximum spindle speed of 3500 rpm. The machine includes a 12-station disc turret and live tooling capabilities for enhanced versatility. If you are looking to get high-quality turning capabilities, consider the DMG NEF 600 horizontal turning machine we have for sale. Contact us for further details.

Engine Brand: DEUTZ, Condition: NEW, Engine Cooling Type: Air Cooled , Engine Color: Grey , Working Hours: 1 Hour(s), Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: no , Starter Voltage: 12 Volt , Rated Power: 38.4 Kw, Rated Speed: 1500 Rpm, Injection Type: Mechanical Fuelpump , Generator KVA: 40 , Generator Hz: 50 , Generator Volts: 400 , Generator Amps: 57.7 , Generator Fases: 3 Fases , , https://www.hamofa.com/stock/generators/deutz-bf4l2011-generator-40kva /86, , = More information =, , Empty weight: 595 kg, Type number: BF4L2011 GENERATOR 40KVA

Offered is a vertical CNC machining center. Travels X/Y/Z: 560mm/410mm/510mm, spindle holder: SK40, spindle speed: 12000rpm, table size: 900mm x 410mm, max. table load: 500kg, tool positions: 30, max. tool weight: 8kg, max. tool length: 350mm, rapid traverse X/Y/Z: 36m/min, spindle motor: 18.5kW, operating hours: 66174h, control system: Mazatrol 640M. Equipped with 30-position tool changer, flood cooling, 1 set of manuals, 1 set of adjustment tools, adaptive feed control function, documentation available. Weight: approx. 5000kg, overall dimensions X/Y/Z: approx. 2600mm/2500mm/2850mm. Inspection possible by arrangement.

General SKU265Y406 MakeNetzsch Serial021 No.340 217 Dimensions Cake capacity290 Pressure Working pressure15 Bar Main Features MaterialPolypropylene Pressure15 Bar Surface19.5 m2 Specified Features - Filterpress Filter presscheck Filter surface19,5 m² Recessed chamber platescheck Number of platens39 Number of frames0 Internal platen sizes550 x 550 mm External platen sizes630 x 630 mm Platen thickness60 mm Frame thickness15 mm Cake capacity290 l Central inletcheck ConnectionsDia. 60mm With outlets on platenscheck With hand valvescheck Hydraulic closingcheck With hydraulic unitGL hydrauliek Motor2,2 kW (400 V) Automatic openingcheck Motor0,55 kW (400 V) MaterialPolypropylene General Year of construction1991 LocationBarneveld With switchgearcheck Floorspace4,0 x 1,5 m Total height1,8 m Weight2700 kg Extra SpecificationsBase plate with tilt mechanism ...

General SKU251Y211 LocationBarneveld CEcheck Pressure Working pressure700 Bar Main Features Capacity60 Ltr./Hr. Motor5.5 KW Pressure700 Bar Specified Features - Piston homogeniser Piston homogenisercheck Capacity18 - 60 l/h Single stagecheck Number of pistons:2 Piston diameter12,7 mm Piston stroke40 mm Piston stroke volume5 ml InletDia. 22 mm OutletDia. 25 mm Motor5,5 kW (400V, (Ex)) With frequence controllercheck Speedmax. 160 rpm With pumptapflo type: TXR20 TTT (Ex) MaterialStainless steel 1.4306 (304L), super duplex SAF2507 1.4410 General MakeNetzsch Serial2801013-10/14673 TypeOmega 60 Year of construction2019 With switchgear(as is) Floorspace1,0 x 1,15 m Total height1,3 m Weight600 kg ATEX designedcheck Extra Specificationsincluding temperature control unit, size 0,5x0,8x1,1 mbrand: National LabTyp: FCP30.02-NEAserialnr:0214930/2002cooling capacity ...

Engine Brand: VOLVO PENTA, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 2 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 185 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-penta-tad881ve-new/4 5888, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 1.030 kg, Type number: TAD881VE

Engine Brand: CATERPILLAR, Condition: NEW, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Yellow , Flywheel Housing SAE: SAE 3 , Flywheel SAE: Unknown , Engine Condition: New , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: 24 Volt , Rated Power: 97 Kw, Rated Speed: 2200 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/caterpillar-c4-4-w23-46131 70-new/42380, , = More information =, , Type: Engine, Type of fuel: Diesel, Empty weight: 615 kg, Type number: C4.4 W23-4613170

General SKU284Y449 MakeNetzsch TypeNM015BH04S24H Pressure Working pressure20 Bar Main Features MaterialStainless steel Volume80 Ltr. Motor0.75 KW Specified Features - Eccentric Screw Pump Pumpcheck Number of pumps:1 Capacity10—80 l/h With motor0,75 kW 230V With variable speed drivecheck With frequency invertercheck Inletø 43 mm Outletø 31 mm Eccentric Screw Pumps MaterialStainless steel 1.4571 (316Ti) General Mach.No.434615 Year of construction2011 LocationBarneveld Floorspace1,1 x 0,3 m Total height0,4 m Weight90 kgPaints & coatingsStarchOther chemicalRubberAgrochemicalsPlastic & polymersEccentric Screw PumpsFeed additivesDetergent & surf.Food additivesLubricants & oleoOther feedDyes & pigmentsMinerals & inorganicNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Other chemicalIndustries > Chemical > R ...

Key data: 420 mm, 170 mm, 115 mm

400 Volt three-phase brake motor Saw blade diameter 420 mm, Saw blade holder 40 mm, Cutting height 170 mm, Saw blade inclined to 45°: cutting height 115 mm , Cutting length 410 mm INCLUDED: Machine can be tilted from the front on both sides via hand crank Additional price for 3 kW 400 volt motor Hydraulic feed brake Laser setup Pneum. Material tension on both sides, from above Carbide circular saw blade 420x3.4/2.4 x40 mm 48 WZ neg Machine stand

WE HEBBEN 46 KEER: EuroScaffold rolsteigerframe 75 × 28 × 7 × 6 keer EuroScaffold steigerplatform 190 cm met luik X 2 KEER EuroScaffold leuningframe AGS Pro 190 cm x 1 keer EuroScaffold horizontale schoor 190 cm x 4 keer EuroScaffold diagonale schoor 190 cm x 6 keer Steigerwiel Ø200 mm met stalen as, 500 kg, nylon X 4 TIMES Steiger telescopische stabilisator 200 cm x 2 keer EuroScaffold aluminium kantplankenset X 1 TIME Leuningklemmen X 8 KEER TOTAAL Gewicht: 153 KG x 46 = 7000 KG EN Verstelbare stabilisatoren 200 x 92 keer TOTAAL Gewicht: 9 kg x 92 = 828 kg

General SKU357X1335 LocationBarneveld CEcheck MakeNetzsch-Condux Main Features Motor3.7 KW Inlet diameter180 mm Specified Features - Jet Mill Motor1,5 kW (380 volt, 12.000 rpm) With variable speed drivecheck General TypeCGS 16/V-DA DSF / CFS 8/HD S No.7043 Year of construction1998 Mounted on framecheck With switchgear(as is) Floor space4 x 1,4 m Total height4,5 m Weight3300 kg Extra SpecificationsTechnical specs (CGS 16/V-DA DSF —&:nbsp:opposed jet mill):Throughput: ca. 10 kg/h Classifier wheel outer diameter: 120 mm Dip tube diameter: 45 mm Max classifier speed: 12,000 min⁻¹ Max gas temperature: 60 °C Drive power: 1.5 kW Drive speed range: 3,000–12,000 min⁻¹Inlet diameter: Dip tube diameter 45 mmTechnical specs (CFS 8/HD-S —&:nbsp:fine classifier): Min speed: 600 min⁻¹ Max speed: 12,000 min⁻¹ Max operating temperature (T_max): 60 °C Drive power:  ...

Screw diameter: 70 mm Injectable volume: 1077 cm3 Injection pressure: 2423 bar Passage between columns: 720 x 720 Moulded thickness: minimum: 450mm- max: 750 Opening stroke: 700 mm Number Of Cores :2

Overview This rotary capping machine (ROPP / roll-on closures) was manufactured in 2008 by AROL Closure Systems. The machine is designed for the application of roll-on closures in beverage and liquid packaging lines, particularly for 28 × 1.5 aluminum closures. It is currently mounted on a pallet and in stored condition. The machine is described as used, with 12 capping heads in very good condition. Visible surface oxidation on the frame is present due to storage but does not affect functionality. The control cabinet is partially open/incomplete with missing HMI.  Technical data Formats: 28 × 1.5 closures Application: Capping of bottles (roll-on closures) Configuration: Rotary turret with 12 capping heads Neck finish: 28 × 1.5

NEGRI BOSSI CANBIO 210 T type V210-610 Année : 2008 Force de fermeture : 2100 KN - 210 T Diamètre vis : 40 mm Volume injectable: 285 cm3 Capacité d’injection en PS : 260 gr Pression d’injection : 2100 bars Rapport L/D : 22 Débit d'injection maxi : 129 cm3/s 3 zones de chauffe Course d’ouverture moule : 540 mm Epaisseur moule mini / max : 200 - 630 mm Passage entre colonnes : 570 x 510 mm Dimension des plateaux : 870 x 790 mm Puissance moteur de la pompe : 22 kW Puissance totale installée : 35 kW Dimensions : 6,03 x 1,54 x 2,20 m Poids : 8200 Kg

General SKULT011 LocationBarneveld CEcheck Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume350 Ltr. Motor0.09 KW Specified Features - Bioreactor Reactorcheck Capacity(3x) 7Ltr., 20 Ltr., (2x) 80 Ltr., 120 Ltr., 190 Ltr., 350 Ltr. With jacketcheck Max. temperature-10/95 °C With propellor stirrerMagnetic ZETA, Type: BMRT Motor0.09 kW, 230-400 Volt, (Ex) With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs Year of construction2021 Mounted on legscheck With switchcheck With switchgear(as is) ATEX designedcheck Extra SpecificationsDownload full specifications of this line here. Download 4 NEW/NEVER USED IMMEDIATELY AVAILABLE FROM A CANCELLED PROJECT Manufacturer: Syntegon Pharmatec ...

General SKU010Y156 MakeNetzsch TypeRM-100 GK, Figur 576.95 No.204.389 Year of construction1992 LocationBarneveld Main Features Volume100 Ltr. Motor90 KW Specified Features - Sand mill Vertical sandmill(1x) Capacity100 Ltr Housing dimensions dia. 535mm With mechanical sealcheck With jacketcheck Rotor jacketedcheck Motor90,0 KW, 380/660 Volt With jacketcheck General With switchgear(as is) Floorspace2,6x1,1 M Total height3,4 M Weight5000 KGPaints & coatingsStarchCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersDiscountIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustries > Food & Feed > Food additivesIndustries > Food & Feed > SugarInd ...

General SKULT004 MakePharmatec GmbH/ Syntegon Technology / Pepperl+Fuchs LocationBarneveld CEcheck TypeMain Fraction Tank Pressure Working pressure3 Bar Vacuum possiblecheck Working pressure jacket6 Bar Vacuum possible jacketcheck Main Features MaterialStainless steel Volume15 Ltr. Motor0.12 KW Specified Features - Bioreactor Reactorcheck Capacity15,0 Ltr (20,5 Ltr ) Vessel sizesdia,250 x315mm Outlet3/4: With jacket(4,5 Ltr, 0,19m2) Max. temperature-10/95°C. With propellor stirrer:Magnetic ZETA, Type BMRT 50 W EX S Dk: Motor0.12 kW, 230-400 Volt, (Ex) Speed mixing shaft125-860 rpm With jacketcheck Bioreactors MaterialStainless steel 1.4404 (316L) General No.12462 Year of construction2021 Mounted on legs:mobile skid: With switchcheck With switchgear(as is) Total height+/- 1,5 m Weight385 kg ATEX designedcheck Extra Specifications- The tank is equippe ...

General SKU122N606 MakeNetzsch TypeLMJ 2 (506.02) No.204 842 Year of construction1983 LocationBarneveld Material Housing materialStainless steel Main Features MaterialStainless steel Volume2.5 Ltr. Motor4 KW Specified Features - Sand mill Horizontal sand mill(1x) Capacity2,5 Ltr. With jacketcheck Motor± 4 KW, Ex With variable speed drivecheck Capacity5-50 Ltr./Hr. With pumpcheck Motor0,25 KW MaterialStainless steel With jacketcheck General With switchgear(as is) Floorspace1,1x0,8 M Total height1,5 MPaints & coatingsStarchCatalysts & fillersDiscountDetergent & surf.CosmeticsFood additivesSugarConfectioneryDyes & pigmentsMinerals & inorganicSand millsNetzschIndustries > Chemical > Paints & coatingsIndustries > Food & Feed > StarchIndustries > Chemical > Catalysts & fillersDiscountIndustries > Chemical > Detergent & surf.Industries > Chemical > CosmeticsIndustri ...

General SKU345S1062 MakeGab Neumann TypeH-B-2,5 No.10927-8691 Year of construction1991 LocationBarneveld Pressure Working pressure shell3 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Main Features Shell (Material)Graphite Tube (Material)Graphite Surface1.75 m2 Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Heating surface1,75 m² Max. temperature-60/165 °C Max. temperature-60/80 °C Shell connectionsDN40 (2x), DN50 Cover connectionsDN40, DN50 MaterialGraphite General Floorspace0,5x0,5 m Total height1 m Weight210 kgOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed additivesOrganicsPaper & otherSolventsShell and tube heat exchangersDetergent & surf. ...

General SKU345S660 LocationBarneveld MakeG.A.B. Neumann GmbH (DE) TypeR-11,5-04/02 No.15420-12710 Pressure Vacuum possiblecheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes3 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Diabon Tube (Material)Diabon Surface8.5 m2 Specified Features - Shell and tube heat exchanger Heat exchanger:Ringnut: Verticalcheck Heating surface8.5m2 Tube capacity30 Ltr Max. temperature-60/180 degr.C>: Shell capacity34 Ltr Max. temperature-60/80 degr.C. Shell connections(2x) DN50 Cover connections(2x) DN50 MaterialGraphite Diabon General Year of construction1996 Weight800 KGOils & fatConsumer wastePaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsSpicesPlastic & polymersCatalysts & fillersFeed addit ...

Manufacturer: 3D Systems Model: nextdent 5100 Year of Manufacture: 2023 Type of Machine : 3D Printing Machine Find more here - .ucymachines/ Contact us at - sales@ucymachines