ne used for sale

Used Netzsch pearl mill type LME 200.The mill has a cooling jacket. Year of construction 1989.

Industrial vacuum cleaner, vacuum cleaner, dust extractor, industrial vacuum, floor vacuum, safety industrial vacuum, polyurethane hose, extraction hose, hose, vacuum cleaner hose, spiral hose, suction hose, hose coupling, hose connectors, hand tube -Manufacturer: Nedermann, coupling plug for vacuum hose Ø 38 mm, unused, original packaging -Type: M50-38P -Coupling piece: Ø 50 mm -Number: 38x hose couplings available -Price: per piece -Dimensions: Ø 60 x 90 mm -Weight: 0.1 kg/piece

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/500/H266 mm -Weight: 54 kg

Power supply for lamp-pumped lasers, marking lasers, control card, input card, control -Manufacturer: SLS Spectron Laser Systems -Control comes from a marking laser -Type: Handling Gretag Laser 6211 -Control is sold untested from stock, so as a spare parts carrier -Dimensions: 482/540/H178 mm -Weight: 11 kg

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing blank: for Ø 35 mm shaft -made of: gray cast iron -Number: 12x stock available -Price: per piece -Dimensions: 70/52/H75 mm -Weight: 1.2 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 90 mm shaft -made of: gunmetal -Number: 2x bearings available -Price: per piece -Dimensions: 130/130/H160 mm -Weight: 4.7 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gray cast iron -Number: 7x bearings available -Price: per piece -Dimensions: 92/70/H85 mm -Weight: 2.0 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing blank: for Ø 45 mm shaft -made of: gunmetal -Number: 13x stock available -Price: per piece -Dimensions: 83/60/H86 mm -Weight: 2.4 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 100 mm shaft -made of: gunmetal -Number: 3x bearings available -Price: per piece -Dimensions: 160/125/H155 mm -Weight: 12 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 35 mm shaft -made of: gunmetal -Number: 1x warehouse available -Price: per piece -Dimensions: 70/49/H65 mm -Weight: 1.1kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 50 mm shaft -made of: gunmetal -Number: 10x stock available -Price: per piece -Dimensions: 92/70/H82 mm -Weight: 2.3 kg/piece

Center bearing for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger, central bearing design -Middle bearing: for Ø 55 mm shaft -made of: gunmetal -Number: 50x stock available -Price: per piece -Dimensions: 90/68/H85 mm -Weight: 2.1 kg/piece

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: for Ø 35 mm shaft -for: gland tape -Number: 44x glands available -Price: per piece -Dimensions: 115/115/H125 mm -Weight: 1.4 kg

Stuffing box for screw conveyors, transport screws, screw conveyors, conveying technology, pipe screw conveyors, drying screws, cooling screws, cooling tube screws, heating screws, heating tube screws, screw heat exchangers -Stuffing box: for Ø 60 mm shaft -for: stuffing box strap -Quantity: 1x stuffing box available Price: per piece -Dimensions: 145/145/H140 mm -Weight: 2.8 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: for Ø 115 mm shaft -for: gland tape -Number: 5x glands available -Price: per piece -Dimensions: 220/220/H130 mm -Weight: 7.5 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: for Ø 50 mm shaft -for: gland tape -Number: 8x glands available -Price: per piece -Dimensions: 135/135/H145 mm -Weight: 2.6 kg

Stuffing box for screw conveyor, screw conveyor, screw conveyor, conveyor technology, pipe screw conveyor, drying screw, cooling screw, cooling pipe screw, heating screw, heating pipe screw, screw heat exchanger -Stuffing box: for Ø 40 mm shaft -for: gland tape -Number: 54x glands available -Price: per piece -Dimensions: 110/110/H95 mm -Weight: 1.3 kg

Stuffing box for screw conveyors, transport screws, screw conveyors, conveying technology, pipe screw conveyors, drying screws, cooling screws, cooling pipe screws, heating screws, heating pipe screws, screw heat exchangers -Stuffing box: for Ø 40 mm shaft -for: stuffing box strap -Number: 27 stuffing boxes available -Price: per piece -Dimensions: 110/110/H125 mm -Weight: 1.6 kg/piece

revolving point, revolving center point, revolving Morse taper, revolving center point, revolving lathe point, center point -Manufacturer: Stieber % Nebelmeier, revolving center point with adapter set unused -Types: RKN 3 DM 4-22 -Recording: MK3 / MK4 -Price / fee: complete -Dimension box: 270/180 / H65 mm -Weight: 3 kg

radial fan, dust extraction blower, fan, extraction, dust blower, blower, exhaust fan -Manufacturer: Nedermans, Dust extraction blower exhaust fan 500725 -Motor: 0.37 kW 3000 rpm -Fan wheel: Ø 290 mm -Connection: Inlet Ø 130 mm -Connection: Output Ø 120 mm -Dimensions: 540/420/H520 mm -Weight: 24 kg

Disc valve, butterfly valve, ball valve, butterfly valve, shut-off valve, gate valve -Manufacturer: Neles Metso, Butterfly Valve type L2DMH16PACAG -Inner diameter: 370 mm -Bolt circle: Ø 520 / 570 mm -Shaft: Ø 70 x 155 mm -Nominal pressure: 51 bar -Technical data: see photos, nameplates -Number: 7x shut-off valves available -Price: per piece -Dimensions: 710/192/H1060 mm -Weight: 340 kg

Eccentric press, single column press, punching machine, single column eccentric press, eccentric press, single column press -Manufacturer: Heilbronn, single column eccentric press type NEPD 50 -Pressure capacity: 50 tons -Clutch: pneumatic -Stroke: adjustable 8 - 100 mm -Table size: 500 x 650 mm -Table recess: Ø 240/100 mm -Projection: 255 mm -Punching fixture: Ø 40 mm -Insertion height 355 mm -Dimensions: 1800/1080/H2260 mm -Weight: 3050 kg

Grinding machine, angle grinder, for chipper knives, planer knives, saw blade grinder, lathe grinder, milling cutter grinder, surface grinder, drill grinder, bench grinder -Manufacturer: Chuet Nevers, tool grinding machine -Speed: 3000 rpm -Grinding wheels: Ø max. 200 mm -Accessories: included, see photos -Dimensions: 680/590/H1560 mm -Weight: approx. 121 kg

Dosing rotary valve, rotary valve, dosing valve, rotary valve for screw conveyor, transport screw, screw conveyor, conveyor technology, tubular screw conveyor -Cell wheel lock. 6-blade, without drive -Type: Ecluse 400x400 -Inlet opening: 400 x 390 mm -Outlet: 400 x 280 mm -Shaft: Ø 30 x 105 mm -Dimensions: 620/500/H650 mm -Weight: 89 kg

PLC controller, electronic module, interference suppression filter, power supply line filter, ballast, mains filter, power line filter, three-phase filter, three-phase mains filter, filter module, mains interference filter -Manufacturer: Cloos, mains interference filter -Type: NEF FS5825 -Dimensions: 265/75/H50 mm -Weight: 0.7 kg

Servo motor, electric motor, DC motor, servo geared motor, synchronous motor -Manufacturer: Beckhoff Neuigart, servo geared motor with brake -Motor: Beckhoff type: AM8022-0D11-0000 -Voltage: 400 V -Power: 0.59 kW -Speed: 8000 rpm -Transmission: Neugart type PLE080-040-SSSA3AE-Z9 -Shaft: Ø 20 x 35 mm -Protection class: IP54 -Brake: 11 W -Technical data: see photos, nameplate -Dimensions: 320/80/H100 mm -Weight: 4.2 kg

Hand spindle press, mandrel press, spindle press, hand spindle press, printing press, balance printing press -Manufacturer: NEHER, manual spindle press type SPPG-40/100 -Pressure: max. 40,000 kg -Stroke: 600 mm -Intermediate dimension: 715 mm -Spindle mount: Ø 40 mm -Table size: 1100 x 600 mm, groove width mm -Table bore: Ø 120 mm -Dimensions: 1800/1800/H2400 mm -Weight: 1940 kg

Mono pump, dosing pump, high-pressure pump, water pump, screw pump, progressive cavity pump -Pumps: for tunnel boring -Adjustable speed: 120-600 rpm -Drive: 5.5 kW -Speed: 20-220 rpm -Pump capacity: 80-100 l/min -Max. pressure: 16 bar -Pipe connection diameter: DN 100 -Dimensions: 3900/470/H1070 mm -Weight: 722 kg

Pneumatic roller vibrator, pneumatic unbalance motor, vibration motor, shaker motor, shaker -Motors: unused -Type: R 120 -Working moment: 1200 cmkg -Rated frequency: 10140 to 11780 rpm -Centrifugal force: 6705 to 9100 N -Air consumption: 315 to 768 L/min -Switching level: 86 to 97 dB -Number: 3x motors available -Price: per piece -Weight: 4 kg

Key data: 6 kN, 2582 g/PS, 90 mm

Tederic NEO H680-i4800 – Two-platen injection molding machine Exhibition piece with minimal operating hours – excellently equipped! This machine is a former pilot plant and demonstration device that was used exclusively for demonstration and test purposes. Accordingly, the The machine has hardly any operating hours and is in excellent condition. The extensive equipment goes far beyond the standard. --- Technical data - Clamping force: 680 t (6,669 kN) - Year of construction: 2022 - Injection unit: i4800 - Screw diameter: 90 mm - Injection weight (hp): 2,582 g - Injection volume: 2,837 cc - Spec. Spray pressure: 1,615 bar - L/D Ratio: 20.8 - Clamping plates: 1,500 x 1,400 mm - Handlebar spacing: 1,100 x 960 mm - Ejector force: 182 kN - Tool installation height: 450 mm - Opening travel: 1,400 mm - Max. panel spacing: 1,850 mm - Ejector trave ...

turning diameter:500 mm turning diameter over bed:500 mm turning dia. over base-slide:290 mm centre distance:1000 mm centre height:250 mm z-travel:1350 mm speeds:10 - 3000 U/min

cutting range for steel to:20 mm total power requirement:3~ 220 / 380 V weight of the machine ca.:100 kg dimensions of the machine ca.:500 x 750 x 1000 mm

pressure:60 t distance between columns:650 mm stroke:220 mm distance table/ram, max. stroke up, adjustment up:410 mm table surface area:600 x 525 mm hole in the table:110 mm table height over floor:900 mm side window:200 mm ram surface:560 x 490 mm power requirement:15,0 kW dimensions (WxDxH):1,9 x 1,3 x 2,7 m foundation pit:not necessary

Manufacturer: Nexturn Model: SA-20D Year of Manufacture: 2008 Machine Hours - Control ON Time: 36,985 hours - Automatic Running Time: 23,697 hours - Feed Time: 17,438 hours - Total Parts Produced: 1,188,215 Recent Maintenance & Overhauls - Sub-spindle replaced approximately 2 years ago including spindle bearings and sealing air - system retrofit - Y-axis fully overhauled in autumn 2025 (bearings and ball screw replaced) - X2-axis overhauled approximately 3 years ago Included Accessories - Loading magazine with additional channels - Various collets for main spindle and sub-spindle - Various guide bushings - Chip conveyors Find more here - .ucymachines/ Contact us at - sales@ucymachines

Perkins 1100 Series 1103A-33TG2 60.5 kW / 85,8 hp @ 1500 rpm; Power [PS]: 82; Transport weight [kg]: 420

Perkins 1100 Series 1104D-44TA, 83.0 kW / 111.3 hp @ 2200 rpm; Power [PS]: 113; Transport weight [kg]: 567

General SKULW008 MakeNetzsch Feinmahltechnik GmbH LocationGermany CEcheck TypeEPSILON 30 Pressure Working pressure5 Bar Main Features MaterialStainless steel Motor37 KW Specified Features - Inline mixer Capacity0,55 Ltr Motor37,0 KW ATEX II 2G Ex dII T4G With frequency controllercheck Rotor speed600 -3600 rpm With vesselcheck Capacity1500 ltr With jacket6 ltr Max. temperature60°C. MaterialStainless steel With jacketcheck General No.2500441-10 Year of construction2020 Mounted on framecheck With switchgearcheck ATEX designedcheck Extra SpecificationsSolids intake&:nbsp:50 - 5000 kg/hSuspension flow during solids intake 15 - 30 m³/hMax. suspension flow during circulation 67 m³/h (water) Technical specs Extra informationStandard rotor version”Paints & coatingsInline high shear mixersNetzschIndustries > Chemical > Paints & coatingsMixers > Inline high shear ...

General SKU397X1140 MakeGab Neumann LocationBarneveld CEcheck Type22 l. Pressure Vacuum possiblecheck Vacuum possible jacketcheck Working pressure shell6 Bar Vacuum possible shellcheck Working pressure tubes6 Bar Tubular vacuum possiblecheck Main Features Shell (Material)Graphite Tube (Material)Graphite Specified Features - Shell and tube heat exchanger Heat exchangercheck Verticalcheck Tube capacity22 l. Max. temperature-30°C/+180°C Shell capacity13 l. Shell diameter400 mm Shell length1090 mm Max. temperature-30°C/+180°C Shell connectionsDia. 125 mm Cover connectionsDia. 25 and 50 mm MaterialGraphite General No.28123-21620 Year of construction2010 Weight355 kgOils & fatPaints & coatingsGeneric medicinesOintmentsFine chemicalsStarchOther chemicalBiotechnologyRubberAgrochemicalsPlastic & polymersCatalysts & fillersFeed additivesSolventsShell and tube he ...

CATERPILLAR C7.1 new engines on stock., Arrangement nr 452-9413., Price on request

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

General SKU014Y168 MakeCarbo-Fill LocationBarneveld CEcheck TypeCF97-SF Main Features MaterialStainless steel Number of1 heads Specified Features - Liquid filler Fillercheck Number of filling heads:1 MaterialStainless steel General No.960068 Year of construction1997 With switchgear(as is) Floorspace1,1x0,8 M Total height2,1 MOils & fatPaints & coatingsGeneric medicinesLiquid fillersBiotechnologyFeed additivesSolventsDiscountCosmeticsLubricants & oleoDairyBeveragesBiopharmaceuticalAPIOmve NetherlandIndustries > Food & Feed > Oils & fatIndustries > Chemical > Paints & coatingsIndustries > Pharmaceutical > Generic medicinesPackaging machines > Liquid fillersIndustries > Chemical > BiotechnologyIndustries > Food & Feed > Feed additivesIndustries > Chemical > SolventsDiscountIndustries > Chemical > CosmeticsIndustries > Chemical > Lubricants & oleoIndustries > Food & Feed > ...

Model: 6219 - Type: Ridenocciolatrice - Year 2010 - 380 volts - Made in Italy - The Peach Repitter model 6219 feeds, aligns and repits the half-peaches containing whole pits or pit fragments, with a speed of up to 320 half-peaches per minute - The machine guarantees a high alignment efficiency and gentle product handling during the whole process - Reduction of the manpower. Thanks to the automatic alignment system and to the knives repitting device the half-peaches require a minimum working time - Superior quality level. The system assures a high alignment efficiency, guaranteeing a gentle product management during the whole working cycle - Low cost maintenance/Minimum downtime. Due to the simplicity of the design of this multiple lane knife pitter, high mechanical reliability is achieved, guaranteeing an extremely easy intervention - Electric engine 1,5 Kw  ...

General SKU409X1229 MakeNetzsch LocationBarneveld CEcheck TypeStativrührer Main Features MaterialStainless steel Volume43 Ltr. Motor1.1 KW Specified Features - Stirring vessel Open stirring vesselcheck Capacity43 Ltr. Vessel sizesø 300 x 600 mm Conical bottomcheck Flat top sidecheck With covercheck Outletø 30 mm With turbo stirrercheck With dissolver stirrercheck Motor1,1 kW (Ex) Speed mixing shaft1000 rpm MaterialStainless steel 1.4306 (304L) General No.2800170-11 Year of construction2016 Mounted on legscheck Floorspace1,1 x 1 m Total height2,3 m Weight400 kg ATEX designedcheck Extra SpecificationsWe have the bottom disk for this one in the box of the Netzsch rs 2/PM is informed, guess spacer is a problem to install&:nbsp: easy / BRFOils & fatPaints & coatingsPowdered foodsGeneric medicinesOintmentsTea, herbs & coffeeFine chemicalsStarchOther chemicalB ...

Manufacturer: NeoDen Model: IN6 Year of Manufacture: Type of Machine : Reflow Oven Key Technical Specifications - Power supply: 110/220 VAC, 1-phase (household power compatible) - Rated power: 2000 W maximum - Heating zones: 6 total (3 upper / 3 lower) - Heating type: aluminum alloy heating plate with nichrome wire - Cooling zones: 1, with bottom cooling fans at offload section - Conveyor speed: 5 to 30 cm/min (2 to 12 inch/min) - Maximum PCB height: 26 mm - Soldering width: 250 mm - Process chamber length: 680 mm (26.8 inch) - Temperature range: room temperature up to 300 degrees C - Temperature control accuracy: +/- 0.2 degrees C - PCB temperature distribution deviation: +/- 1 degree C - Heat-up time: 20 to 30 minutes - Operation direction: left to right - Machine dimensions: 1020 x 507 x 350 mm (L x W x H) - Packing size: 112 x 62 x 56 cm - Net weight: 49 kg - Gr ...

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran spanentransportband De staafaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tooleye Mayfran spaanband De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Hoofdspindelmotor: 26 kW - max. spindelsnelheid: 4000 tpm Onderspindelmotor: 11 kW - max. onderspindelsnelheid: 6000 tpm Gereedschaprevolver met 12 stations (aangedreven) - max. snelheid: 4500 tpm (5,5 kW) Toolsetter / tool eye Mayfran chiptransporteur De stangaanvoer is optioneel. MistCleaner is optioneel. De zwarte onderdelenvanger aan de voorzijde is optioneel. Swing over bed: 380 mm Distance centre tot centre: 504 mm Max longitudinal travel Z-axis: 625 mm Max cross travel X-axis: 234 mm Dia of spindle bore: 76 mm Power on the spindle: 18,5 kW Number of speeds: 4000 rpm Command: Mazatrol Matrix Nexus 2 Toolchanger: yes Number of tools: 12 positions

Code: 0361 Brand: NERLI Model: PN 28 Semi-automatic sanding machine for wood, varnish, polyester, with 1 abrasive belt N° 20 pads with automatic lowering by means of choiceors Table lenght mm 3000 Table width mm 950 Automatic table raising Electronic display Inverter for belt speed Blowers for abrasive belt cleaning Main motor 20 Hp Table lifting motor 1 Hp Max working height 550 mm Belt dimensions mm 9650 x 150 Belt speed mt 25/sec Side support guide N° 2 suction outlets diameter 160 mm Overall dimensions: mm 4850 x 2000 x1850 h Weight kg 2000

Screw diameter: 120 mm Injectable volume / Shot volume: 6785 cm3 Injectable weight / Shot weight: 6100 g Injection pressure: 1620 bar Column passage / Bettween tie bar: 1120 x 1000 mm Mold Thickness /Tickness tie bar: 500-1200 mm Opening stroke: 1200 mm Ejection stroke: 400 mm 4 corepulling 4 blow guns / 4 air valves Electrical screw motor