ne used for sale

Manufacturer: Pilz Netzteil C-P8-E Enstörfilter Eingabe, Type: 24 volt 10ms, Model: 3069100,

Manufacturer: Pilz Netzteil C-P8-NTE- Netzteil 110/220 Volt, Type: C-P8-NTE, Model: 50-60 Hz 30 VA,

Netzsch Omega 60 homogenisator with control cabinet. Rated flow: 60 liter/hour Maximum pressure: 700 bar.

Technical data of the pallet rack crossbar: Shelving system: Nedcon Type: NS The scope of delivery includes: 01x Pallet rack crossbar, used Material color: blue Box profile: 130 x 50 mm Clasp: 7 HK (hooks) Clear width: 3,700 mm Max. load per pair of trusses 3,000 kg at the same weight. Distributed load 02x Locking pin, used Material colour: sendzimir galvanised For securing the longitudinal members against unintentional lifting Your contact persons in our company: Mr.: Andre Evering Sir: Mario Klöver Mr.: Falk German General information about the article: This item is only available for pickup. An additional desired transport or a shipment of this item is associated with additional costs, which will be charged separately depending on the delivery location or scope of delivery.

B&A REF: 9108 TON: 430 SCREW DIAMETER: 80MM SHOT WEIGHT: 1645 STROKE VOLUME: 1810CM3 INJECTION PRESSURE: 1615AR PLATEN SIZES: 1060 X 1135MM DBTB: 680 X 760MM MIN MOULD HEIGHT: 250MM MAX MOULD HEIGHT: 800MM MOULD OPENING STROKE: 730MM MAX DAYLIGHT: 1530MM EJECTOR STROKE: 250MM CONTROLS: COLUMBIA CORE PULLING: 3 AIR VALVES: 4 MOTOR: 45 HEATING CAPACITY: 34KW ROBOT INTERFACE: EUROMAP 67 SCREW DRIVE: HYDRAULIC

Technical data for the pallet racking system: Shelving system: Nedcon Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 19,100 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 24 pcs. Number of pallet spaces per row: 120 pcs. Total number of pallet spaces: 120 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 750 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: creamy white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Column height: 9,000 mm Stand de ...

Technical data for the pallet racking system: Shelving system: Nedcon Type: NS Technical data for the installation: Number of rows of shelves: 01 pcs. Length per row of shelves: 10,100 mm Number of fields per row of shelves: 05 pcs. Number of levels plus ground level: 05 pcs. Technical data on the volume: Pallet spaces per field: 12 pcs. Number of pallet spaces per row: 60 pcs. Total number of pallet spaces: 60 pcs. Based on: Loading aid: Euro pallet EN 13698-1 Dimensions: 1,200 x 800 x 150 mm Total height incl. pallet: n.d. Weight per pallet (max.): 1,000 kg The scope of delivery includes: 06x Pallet rack stand, used Material colour: creamy white Frame profile: 1007825 Profile dimensions: 100 x 78 x 2.5 mm Adjustment grid: 50|50 mm incl. cross and diagonal struts, Footplates The stands are pre-assembled (screwed truss) Column height: 9,000 mm Stand de ...

A Schuko filter unit with a Nestro centrifugal fan is sold. Schuko STA filter system Filter area 90sqm Number of filters 90 Filter length 2000mm Dimensions approx. H= 3.9m Length = 3m Depth 1.15m Nestro 7.5kw/380V Volume flow 7650 m3/h Machine can and should be inspected and tried out on site, as warranty or guarantee is excluded.

Nerak vertical Z conveyor 2500-750-650-350 Stainless steel food grade RA1961 Make: Nerak Material: Stainless steel food grade Running direction: both directions Vertical transport height: 2500 mm Maximum size of transported material: 750x650x350 mm LxWxH Overall height: 3300 mm scaffold width (NB): 1155 mm Height feet: 150 mm return rollers: 20 pcs. Motor : SEW motor 380-500V Conveying speed: 0,45m/s Scope of delivery: including supports, without side guide, light barriers, terminal box. Optionally available: Frequency converter Features: Length base: 1700 Breite Basis: 1155 Bauhöhe in mm (BH): 3300 nominal voltage: 380-500V Engine type: SEW Eurodrive Transporthöhe mm: 2500 Transportgut LxBxH mm: 750x650x350 scope of delivery: including supports, Klemmkasten, Lichtschranken For individual, expert advice, simply get in touch with us. Simply contact us by phone or email. We will be hap ...

Manufacturer: NEFF Model: 4SP 160 Year of Manufacture: 2011 Operating Hours: 25 aprox Type of Machine: Hydraulic Press Weight: 7000 kg Condition: Used Control System: Siemens S7 (PLC) Technical Specifications - Press Force: 1600 kN (adjustable from 160–1600 kN) - Return Force: Approx. 160 kN - Stroke (Hub): 500 mm - Table Size (W x D): 2000 x 800 mm - Ram Size (W x D): 2000 x 800 mm - Clear Height (Ram Up): 700 mm - Max. Daylight (Open Height): 2850 mm - Table Height Above Floor: 800 mm - Clearance Between Columns (W x D): 1600 x 410 mm - Installation Space (W x D x H): 2000 x 800 x 700 mm Electrical System - Operating Voltage: 400V AC - Control Voltage: 24V DC - Valve Voltage: 24V DC - Frequency: 50 Hz - Voltage Fluctuation Tolerance: ±5% - Max. Ambient Temp: 35°C Find more here - .ucymachines/ Contact us at - sales@ucymachines

MAZAK QUICK TURN NEXUS 100MS CNC lathe was built in 2005 in Japan by YAMAZAKI MAZAK CORP. The machine, designed for precision machining of workpieces with a maximum diameter of 280 mm, is distinguished by the use of reliable components with excellent technical parameters, such as two spindles (main spindle and sub-spindle) and a 12-position turret. The machining process is performed inside a large, fully illuminated workspace by means of a powerful spindle with an integrated motor design that minimises vibrations at high speeds. This is all complemented by an intelligent CNC control that simplifies daily work by allowing even the most advanced machining programmes to be created in just a few steps. The MAZAK QTN-100MS CNC turning center weighs 4100 kg. Technical specifications of the MAZAK QUICK TURN NEXUS 100MS metal lathe - CNC control: MAZATROL 640T NEXUS - maximum turning diamet ...

Foot: 900 mm Vertical: 4980 mm Head: 2770 mm Belt speed: 0.47 m/s Flow rate: 10.0 cbm/h Bulk density: 0.18-0.25 t/cbm Engine power: 0.55 kW Speed range: 136 rpm Chain drive: 5/8" Chain Pulley Motor: Z = 15 Sprocket B. movement: Z = 38 Shaft design: sheet steel 3+4mm Removable side plates in the base Further measurements can be found in the attached plan.

Sigma mixer with a gross trough volume of 8 l., drive via Bauer gear motor with 1.1 kW, trough manually tiltable for emptying. Parts in contact with the product made of stainless steel. Very good condition.

Newtec 9 heads weigher with PCS system, also available with funnel

Various injection molding machines are available. 1) Arburg Allrounder 420 A 1000-400, clamping force: 100t, screw diameter: 30/35mm, year of manufacture: 2005. 2) Demag 1000-420-310 EL-Exis S, clamping force: 100t, screw diameter: 30mm, year of manufacture: 2003. 3) Demag 1000-420-200 EL-Exis S, clamping force: 100t, screw diameter: 25mm, year of manufacture: 2003. 4) Arburg 570 C 2000-150/60 2K, clamping force: 200t, screw diameter: 25/12+15mm, year of manufacture: 2007. 5) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 35mm, year of manufacture: 1996. 6) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30/25mm, year of manufacture: 1995. 7) Arburg 420 C 1000-250, clamping force: 100t, screw diameter: 30mm, year of manufacture: 1994. 8) Netstal Synergy 600-110, clamping force: 60t, screw diameter: 25mm, year of manufacture: 2001. 9) Arburg 900T 800-150, clampi ...

technical details:: new parts special accessories: original parts machine: Ryobi mm Big stock of new and original Ryobi parts for all offset presses Just asking for with spare parts number and model of the machine Big Discount possible! The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Newtec 2013M, Nice condition weigher with double PCS (Portion collection system), This machine was used for 1kg. portions potatoes at a speed of around 30 portions per minute., The PCS system can discharge both left and right., STC just acquired this equipment., While we currently received a lot of new stock we didnt find the time yet to do any work to it., Of-course if you are interested we can prioritize to test and inspect, to ensure you will get a 100% working condition machine., If you are interested obviously feel free to contact us so we can gather more information for you.

NEWTEC palletizer, type: PAL-PACK 4700, number: YP26, year of construction: 01/2001, 400 V, 3 Ph, 50 Hz, 35.6/8.7 A, dimensions: 17000 mm x 7000 mm x 5000 mm.

NEWTEC palletizer, type: PAL-PACK 4700 020/A, number: YP260/91S, year of construction: 11/2000, 400 V, 3 Ph, 50 Hz, 35.6/8.7 A, dimensions: 14000 mm x 7000 mm x 5000 mm.

Capacity: 25 ton Throat depth: 250 mm Ram stroke: 6 - 60 mm Slide adjustment: 50 mm Shut height (stroke down, adjustment up): 190 mm Height of the bolster plate: 50 mm Table surface area : 500 x 400 mm Slide area: 350 x 250 mm Tool Clamping Hole Ram: 40 H7 mm Number of strokes: 160 s.p.m. Dimensions L x W x H: 1.300 x 1.500 x 1.995 mm Weight of machine approx.: 2 ton

NEWTEC palletizer with Fanuc robot, type: M/10 IC FANUC, number: PR33, year of construction: 04/2008, dimensions: 10000 mm x 4000 mm x 3500 mm.

Size: 46x58,5, Hotfoil and Hologram register, two foil pulls, 2 hologram registration, max. / min. foil width 550mm/15mm, honey comb, max roll width 60mm, electronic counter, control unit Also available in following sizes: 54x72 56x77 56x82 64x90

A hardly used Netzsch rotary lobe pump is available. Flow rate: 30m³/h, max. pressure: 2bar, max. temperature: 80°C, design: block design, number of poles: 6, operating hours: approx. 5h. Documentation available. On-site inspection is possible.

A baguette long rolling machine in mint condition for the long-molded forming of dough pieces for the production of baguettes is available. Table dimensions X/Y: approx. 1600mm/850mm, long rolling plate dimensions X/Y: approx. 1200mm/610mm, conveyor belt dimensions X/Y (extended): approx. 3100mm/610mm, max. gap opening: 75mm, weight: approx. 100kg. Documentation available. On-site inspection is possible.

turning diameter: 212 mm turning length: 750 mm control: HEIDENHAIN Manual Plus spindle turning speed - stepless: 10-4000 U/min turret head: 8 Stationen weight of the machine ca.: 2 t dimensions of the machine ca.: 2.85 x 1.65 x 1.80 m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

overhauled, with in-house warranty: Boiler 80 liters Küppersbusch KCN0245/NES080, 400 V, 15.6 kW, 25 A, plug 32 A, automatic cooking, continuous cooking, start time preselection, process time, inlet for hot and cold water, dimensions 80x85x86 cm

curved conveyor belt bend 90? width carpet 500 mm total width 700 mm min/max height 890/990 mm length inner size 2800 mm engine 0.55 kW

TBI VC 1270 HH New Line CNC machining center was built in 2023 in Poland by TBI Technology Sp. z o.o.. This extremely efficient and reliable machine is the perfect choice for precision machining of workpieces with a maximum weight of 1500 kg. The work space, in relation to the machine’s compact dimensions, has been fully maximised in order to make the operations easier and completely free. It consists, among others, of a large work table and a body made of the highest quality grey cast iron, whose stability ensures maximum precision and repeatability of the produced parts. The very precisely balanced spindle, in turn, allows vibration-free operation at any speed. Its excellent temperature stabilisation also ensures that the temperature remains constant during even the most intense challenges. The spindle taper and tool changer are continuously purged with air to protect them from ch ...

chucking diameter: 250 mm greates pass round over bed: 500 mm swing diameter over slide rest: 290 mm centre distance: 850 / 1350 mm weight of the machine ca.: 2700 KG dimensions of the machine ca.: 2900 x 1953 x 1825 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

control: Heidenhain centre distance: 1400 mm weight of the machine ca.: 3,6 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

Hot Runner Controller - Husky Altanium X-c-12-NEO2-12 Year of construction: Location: Lodz, Poland Description: 12 hot zones with wiring Touchscreen All offered devices are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected device or to participate in live technical tests at our company in Łódź. Price: On request

Injection moulding machine Netstal synergy 600/110 BJ 2001

NC Lathe Gildemeister Nef 500 BJ 1996

Pump with substructure and drive Min. Max. Flow rate 4 m³/h 35 m³/h Differential pressure 14.9 bar 3.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Stator Bolt Material: Galvanized Steel Accessories mounted on the pump STP-2 without temperature controller Geared Motor North, Type SK52-180MP/4

Pump with substructure and drive Flow rate min. 10 m³/h max. 70 m³/h Differential pressure min. 4.9 bar max. 0.9 bar Joint type: K (arch tooth joint) Joint seal: Protective sleeve screwed Joint seal: material EPDM, sleeve inside FPM Joint Lubrication Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Stator Bolt Material: Galvanized Steel Geared Motor North, Type SK52-160LP/4-F(VL) TF F

Progressing cavity pump with substructure and drive Flow rate min. 4 m³/h max. 35 m³/h Differential pressure min. 14.9 bar max. 3.9 bar Joint Type: Bolt Joint Joint seal material: EPDM/1.4401 Joint Lubrication: Food Oil UH1 6-460 Rotor material: CrNiMo17-12-2 Rotor: Temperature range 80°C undersize Stator Material: NEMOLAST® S46 Special version m.STP2 Geared Motor North, Type SK52-180MP/4 -F(VL) TF

Conveyor - Wittmann Feedmax S3-NET / New, unused (6 pcs.) Year of manufacture: 2023 Location: Lodz, Poland Description: Suction conveyor with a hose and suction probes The conveyor has its own control system. On the control system, you can set the proportions in which the raw material is to be transported It is possible to buy a plastic container as well as a proportional valve for transporting 2 raw materials, e.g. regrind and original Price: On request

Gear Motor - Motor: Motovario, Gearbox: Neri Motori 2.2 kW

Inv. Num. : 8609 Type: 1600 KOMBI Producer: NESSAP Generated: Parameters: Control system: NESSAP Software: WRYKRYS Work table length: 3000 mm Work table width: 1500 mm Minimum sheet thickness: 0.5 mm Maximum sheet thickness when cutting: 100 mm Plasma Source: Cebora 160A Cutting speed: 12 m/min

Machine name: Filter press used Manufacturer: Netzsch Type: 800/32 Year of Make: 1984 Design: Side-spar press Filter pressure: 15 bar Press capacity: approx. 480 litres Procedure: Closed Filter area: approx. 34 m2 Plate format: 800 x 800 mm Number of plates: 32 Panel material: Polypropylene Plate Conveyor: Automatic Filter Cloth Washer: No Panel package length: approx. 2000 mm Cake thickness: 30 mm Closing pressure: 350 bar Dimensions: L 4,500 x W 1,700 x H 2,000 mm Empty weight: approx. 5000 kg Accessories: A control cabinet, a hydraulic system, a light barrier & drip plates. Condition: Used Price: On request

A stationary and a mobile container emptying system (drum emptying) Netzsch are available. Drum size: 100l/200l, drive power: 15kW, max. delivery pressure: 8bar, delivery rate: approx. 1000l/h, speed: 1450rpm, max. liquid viscosity: 1000Pas. Machine dimensions X/Y/Z: approx. 1700mm/1300mm/2200mm. Documentation available. An on-site inspection is possible.

Osai Neomark 400 Nd-YAG Laser Marking Machine Labeling and marking system particularly suitable for high production volumes and printed circuit boards with high packing density. Due to the large working area and the resulting elimination of traversing movements, high-resolution and precise marking is possible, saving up to 60% writing time compared to conventional systems. Manufacturer: Osai Type: Marking Laser GIOTTO Laser Type: Neomark Y400 Power: 500 W Volt: 230 V Weight: 1300 kg Laser has been completely rebuilt Engine of Beamexpander renewed All hoses for cooling new More items - new and used - can be found in our shop! International shipping costs on request!

Newbind Adventure parts, electronic and mechanical.

Netstal Elion 800 injection moulding machine with Wittmann Handling Primus The machine is fully functional and has only 6500 operating hours

1 gebr. Drawing board, Fabr. Nestler, Type Tanag

Key data: 200 mm

Face plate 200 mm, partial accuracy +/- 15", incl. Servo motor with hydraulic clamping Fixed tailstock Tip height 200 mm

x-travel: 835 mm y-travel: 510 mm z-travel: 510 mm distance spindle nose and table: 120 - 630 mm control: iTNC 530 ERGOLine Heidenhain Main spindle:: turning speed range - main spindle: 20 - 10.000 min/-1 power capacity - main spindel: 13 / 9 kW tool taper: SK 40 DIN 69871 max. Torque: 130 / 87 Nm work table:: table surface area: 1.000 x 560 mm max. table load: 800 kg number of T-slots: 5 T-slot - width: 14 mm T-slot - distance: 100 mm Tool-Presetter:: number of toolpositions: 20 pos. max. tool diameter: 80 mm max. tool-dia with free toolbox: 130 mm max. tool length: 250 mm max. tool weight: 6,0 kg feeds:: rapid traverse ( X / Y / Z ): 30 m/min feed speeds: 1 - 20.000 mm/min total power requirement: 23 kVA weight of the machine ca.: 4,0 t dimensions of the machine ca.: 4,5 x 3,5 x 2,7 m Chip conveyor: Automatic Tool Changer: 20 pos. Coolantsystem: elektr. hand wheel: direct probin ...

CONTROLS   PLC SIEMENS S7 300 PRESS DESIGN   drive system: hydraulic PRESS FORCES   total force (nominal): 800 to PRESS TABLE   table surface (left-right): 2600 mm   table surface (front-back): 2000 mm   height above floor level: 540 mm SLIDE   stroke: 900 mm SLIDE (HYDR. PRESS)   approximation velocity max.: 460 mm/s   working velocity min.: 25 mm/s   working velocity max.: 44 mm/s   return velocity max.: 460 mm/s TOOL ASSEMBLY DIMENSIONS   shut height (stroke down, adjustment up), BDC: 1700 mm ELECTRICAL SPECIFICATIONS   total power consumption: 180 kW DIMENSIONS / WEIGHTS   total weight approx.: 95000 kg ATTACHMENTS (PRESSES)   press automation: yes   gripper transfer system: yes   acc. to actual accident protection regulation: yes   European CE standards: yes Complete hot forming line consisting of: Hydraulic press NEFF 800 to. Ruhstrat furnac ...

: 0600 mm : 300 mm : 382 mm : 700x340 mm : 355x38x127 mm : 1500 U/min The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.