nc feeder used for sale

But here I have an automation component of an old system. These are two vibratory conveyors and associated elements.

A bar loading magazine FMB for long turning automatics is offered. Bar diameter (min./max.): 2mm-23mm, max. bar length: 4200mm, max. remnant length: 420mm, loading compartment length/magazine length: 235mm, compressed air connection: 0.6MPa (6bar). An on-site inspection is possible by appointment.

Switches to Muller Martini saddle stitcher feeder: - 0416.2067.2 Switch, 26 pcs. Original price: CHF 1082.00/pcs. Retail price: CHF 400.00/pc. - 0345.3222.2 Switch, 2 pcs. Original price: CHF 653.50/pc. Retail price: CHF 300.00/pc. - 0345.3216.2 Switch, 1 pc. Original price: CHF 848.25/pcs. Retail price: CHF 400.00/pc. - 0316.3206.2 Switch, 1 pc. Original price: CHF 768.00/pcs. Retail price: CHF 400.00/pc. - 0316.3208.2 Switch, 1 pc. Original price: CHF 800.00/pc. Sales price: CHF 400.00/pc.

Year: 2019 - technically efficient, ready to work – after full service - working length: 3500 mm - adjustable leg height - roller width: 240 mm

Circular screen feeder with a maximum filling volume of 1,000 l.; Motor power spread arm: 15 kW; Motor power turntable: 0.55 kW. Container diameter: 1200 mm; Plate diameter: 1600 mm; Hopper diameter at the top: 1400 mm. Discharge height: Approx. 730 mm; Screen height: 300 mm / Perforations: 30 x 15 mm (oval). Spreading arm provided with scraper plates made of Hardox. The scope of delivery includes a control cabinet with frequency converters for regulating the speeds of the platter and spreading arm.

Size: 4.400 (2.750) x 1.200mm. - With Rubber wearplates (Metso Trellex SQ300) - 2 Pcs. Friedrich F2000-6-7.8 (5,6KW / 1.000RPM) Unbalance motors

Size: 1.300 (1.250) x 650 mm - MA220 (380V. / 16A. / 0,6 kW) Magnetic vibrator - With steel wear plates - Included Thyristor controller

OVERHAULED - Size: 1.600 x 1.200 mm - 2 Pcs. SE 1,5 / 4 (0,8 kW / 1.400 RPM) (220 / 380V. - 3,7 / 2,15A) Unbalance Motors - Rubber protection

UNUSED - Size: 1.250 x 900 mm (Stainless steel) - Magnetic Vibrator: MV E (3 kW / 1.500 U/min) - With Tyristor controller

Size : 3.000 x 1.950mm. - With 2 Pcs. Friedrich unbalance motors of 2KW each. - Included: Frame with rubbers springs and springs

TECHNICAL DATA: 03 Reels Installed power: 0.6 kW

Round feeder for dosing difficult-to-flow materials, trough diameter: 950 mm, trough height: 800 mm, trough capacity: approx. 0.5 m³, plate diameter: 1,200 mm; discharge via 3-arm soil agitator with wall-mounted scraper and adjustable pusher / weir. Drive via SEW adjustable gear motor with 5.5 kW. Workshop overhauled in 2017 by Belgian specialist company, not used since then.

Manufacturer: Top Automazioni Model: ETL 10-65 Year of Manufacture: 2018 Machine Type : Automatic bar loader CE marked: Yes Technical data Maximum bar length: up to 3200 mm Weight: approx. 2500 kg Configuration and compatibility Originally installed on: Emco Maxxturn 65 Supplied as: Top Load version via Emco, manufacturer is Top Automazioni Included in sale: Bar loader including control unit Condition : The bar loader is in good, age-appropriate condition. No known damage. Fully functional before shutdown. Find more here - / Contact us at -

Inv. Num. : 8916 Type: Maxis 62N Producer: IEMCA Created: 2007 Parameters: Maximum rod length: 3485 mm Rod diameter: 9-62 mm Weight: 770 kg

SKS PF5 Wire Feeder and FPM8i Component Package Manufacturer: SKS Welding Systems Device type: Wire feeder devices and system components Total quantity: 14 pieces PF5-LEA 10-2-9: 1 piece PF5-L 10-2-21: 2pcs PF5-R GFS 10-2-104: 1 piece PF5-L GFS 10-2-108: 3 pieces PF5-L 10-2-8: 5 pieces FPM8i 10-13-200: 2 pieces Design: Industrial MIG/MAG wire feeders Wire drive: 4-roller system Scope of delivery: Wire feeder devices according to the above parts list

SERVO - Bar loading magazine HATEC AM 90 -Diameter range 4 - 65mm -Length range 100 - 1270mm -Feed of the working head 1300mm -Total power requirement 1KW -Drive - SERVO Drive -Control - CNC -Max. bar weight 40Kg -Various feed rods -DOCUMENTATION Dimensions: LxWxH 1.6x1.1x1.3 meters / Weight 250Kg

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm (on request new sewer parts € 1,500,-, approx. 4 weeks) - Material slide length LL - Centering - last attached to Gildemeister Twin 32 - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 52 mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 900 kg - Dimensions LxWxH 4,000x700x1,200 mm

Combination conveyor, fan with connection to the hopper, fan conveyor, combination conveyor, AirMove - components, injector conveyor, injection conveyor -Injector conveyor: injection conveyor with distributor, without fan -Inlet funnel: 175 x 180 mm -Distribution radius: 200 mm -Discharge pipe: Ø 60 m -Drive motor: Euronorm 0.09 kW -Number: 3x conveyors available -Price per piece -Dimensions total: 1630/500 / H1230 mm -Weight: 57 kg

LNS QUICK LOAD SERVO 2 / Rod Loading Magazine -Rod diameter (round) 6 - 80mm -Pole length 1.3 - 1.5 meters -Bar weight max. 67 kg -Charging time 4 - 12 seconds -Feed speed Max 100m/min -Air connection 5 bar Dimensions: LxWxH 2.2x1.5x1.5 meters / Weight 650Kg

Roller conveyor length: 3000 mm; Roller conveyor width: 400 mm;

roles: 3; speeds: stepless;

Wheels: 4; Speed levels: 2;

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod selectable: Delivery without tripod / optionally the following tripods can be selected: Standard / 1050 / PLUS with counter; Motor power: 0.75kW;

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: variable 3 - 18 m/min.; Tripod: Tripod 1050 plus; Motor power: 0.75kW; Uniform feed speed without loss of forceClockwise and counterclockwise rotationIncluding tripod PLUS with high-quality clamping levers and counter, individually swivelling and adjustable for horizontal and vertical useSpeeds from 3 to 18 m/min infinitely adjustable via rotary knobSpeed transmission by tapered pulley belt drive

Wheels: 4; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 8; Tripod: Tripod 1050mm; Motor power: 1/0.7kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

rolls: 4; speed: 2 - 30 m/min; number of speeds: 2 Getriebe, 2 Motor, 2 Zahnrad-wechsel (8);

Rolls: 3; Roll width: 60mm; Roll diameter: 120mm; Travel: 20mm; Speeds: 2 / 4 / 5.5 / 6.5 / 11 / 13 / 16.5 / 33m/min; Tripod projection: 1050 ; Motor power: 0.75kW; Uniform feed speed without loss of powerClockwise and counterclockwise rotationIncluding tripod, individually swivel and adjustable for horizontal and vertical useEight speeds possible, speed selection via switch and gearbox

CRAMMED FEEDING UNIT, reconditioned, This unit can be synchronized to feeding screw from buffer silo and horizontal screw in extruder to grant a uniform, continuous feeding, for light scraps, mounted on a 130 mm extrusion line, totally reconditioned, possible addition of mastebatch feeder, availability: in stock, conditions: reconditioned, type: for up to 700 kg/h extruders

PIOVAN Three-phase F32 feeder- 1,3kw Model : F32 Year : 1996 With holding hopper 1 Pallet Dimensions (L x W x H) : 1,20m x 0,80m x 0,80m Weight : 120 kg

A barely used allround PCB handling station RG Elektro-Technologie for loading purposes is available. Application possibility: before AOI/after AOI/combined, PCB transport height range: 930mm-970mm, min. PCB dimensions X/Y: 80mm/50mm, max. magazine dimensions X/Y/Z: 360mm/360mm/570mm, machine dimensions X/Y/Z: approx. 1200mm/1700mm/1800mm, weight: approx. 250kg, control: Siemens S7-1200. Documentation available. An on-site inspection is possible. The image is an example.

with digital display

- Guide channel (oil-damped) - Max. bar length 3,200 mm - Included guide channel: D 21mm - Material slide length L - Centering - Synchronous device - last attached to long-turning automat - Weight approx. 800 kg - Dimensions LxWxH 4,000x700x1,200 mm

5 industrial welders with wire feeder Auction-ID: A7-45993-177

Technical details Type: Carton production / folding-gluing machine Production range: - Maximum size: 650 × 400 mm - Minimum size: 80 × 80 mm - Max height: 300 mm Note: Depends on paper weight and design Power consumption: 1.5 kW Air consumption: Approx. 1,000 NL/h at 6 bar Capabilities: - Straight line cartons - Lock-bottom cartons - 4-corner cartons - 6-corner cartons Serial number: 2001/220.04 Auction-ID: A7-46679-4

2 industrial welders with wire feeder Auction-ID: A7-45993-185

4 industrial welders with wire feeder Auction-ID: A7-45993-178

Technical details Manufacturer: Imperia Rabolini Model: C Year: 1992 Type: Die cutting machine with automatic feeder Max sheet size (with frame): 750 × 1050 mm Max sheet size (without frame): 840 × 1110 mm Min sheet size: 360 × 490 mm Max feeder size: 850 × 1200 mm Speed: Up to 1500 sheets/hour Material range: - Min grammage: 220 g/m² - Max grammage: 1500 g/m² (approx. 1.5 mm thickness) - Corrugated board thickness: Up to 5 mm Equipment: - Automatic feeder M90L-4 - 2 frames - 15 cutting plates - Documentation available Serial number: 9209/14/2 Dimensions (approx.) Unit 1: Width: 2300 mm Length: 1820 mm Height: 1650 mm Unit 2: Width: 1240 mm Length: 2200 mm Height: 2010 mm Auction-ID: A7-46679-6

Vibratory Feeders Manufacturer: Vibra Schultheis Type ER 11 No. 7174 Oscillation frequency 50 / 60 Hz Power 60 VA, 0.22 A, channel width approx. 70 mm, channel length approx. 500 mm, permissible payload approx. 1-3 kg Flow rate for plastic granulate max. approx. 1 m³/h ER 11 incl. Electric Thyristor Controllers VST

2 industrial welders with wire feeder Auction-ID: A7-45993-187

2 industrial welders with wire feeder Auction-ID: A7-45993-174

3 industrial welders with wire feeder Auction-ID: A7-45993-190

2 industrial welders with wire feeder Auction-ID: A7-45993-183

2 industrial welders with wire feeder Auction-ID: A7-45993-175

Industrial welder with wire feeder Auction-ID: A7-45993-182

5 industrial welders with wire feeder Auction-ID: A7-45993-180

5 industrial welders with wire feeder Auction-ID: A7-45993-176

2 industrial welders with wire feeder Auction-ID: A7-45993-186

2 industrial welders with wire feeder Auction-ID: A7-45993-191

Round material Ø 6-76 mm Rectangle minimum edge length 6 mm, envelope maximum 76 mm Dimensions LxWxH: 1800 x 850 x 1300 mm Weight approx. 600 kg Last attached to INDEX ABC 65