127,273 used machines on RESALE, but how to find them? Machine Search
Three-phase motor, electric motor -Power: 0.1 kW -Speed: 3000 rpm -Shaft: Ø 8 mm -Design: B3 -Protection class: IP 44 -Dimensions: 230/160/H110 mm -Weight: 3.3 kg
electric motor, three-phase motor -Power: 0.37 kW -Speed: 2750 rpm -Shaft diameter: 14 mm -Design: B5 -Protection class: IP 54 -Weight: 7 kg
electric motor, three-phase motor -Power: 0.55 kW -Speed: 1380 rpm -Shaft diameter: 18 mm -Design: B5 -Protection class: IP 54 -Weight: 9 kg
electric motor, three-phase motor -Power: 1.6 kW -Speed: 2740 rpm -Shaft diameter: 20 mm -Design: B5 -Protection class: IP 44 -Quantity: 2 available -Price: per piece -Weight: 20 kg
Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 800 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating
electric clutch brake -24 V -20 W -Power transmission: 15 Nm -Weight: 7 kg
Workbench, work table, assembly bench, drawer cabinet, tool cabinet -Width: 1500 mm -Depth: 750 mm -Height: 780 mm -Drawers: 5 -Weight: 80 kg -Conductive tabletop with: Anka-Plast coating
Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 300W -Length: 155 mm -Diameter: 13 mm -Weight: 0.2 kg
An external lift Büter Hebetechnik GmbH is available. Payload: 2000kg, lifting height: 8160mm, lifting time: approx. 45s, lowering time: approx. 45s, drive power: 6.2kW, stops: 3, ground floor height: 0mm, 1st floor height: 4450mm, 2nd floor height: 8355mm, internal dimensions X/Y: 1500mm/1260mm, largest pallet: CP2. Documentation available. An on-site inspection is possible.
Pneumatic diverter, electric, as good as new
Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 230V 500W -Length: 90 mm -Diameter: 13 mm -Price: per piece -Quantity: 9x Available -Weight: 0.2 kg
Screw-in heating element, electric heater, electric radiator, heating coil, electric tubular heater, heating element, air heater, rod heater, heating rod, heating cartridge, high-performance heating cartridge -Type: HLP 220V 800W -Length: 140 mm -Diameter: 13 mm -Price: per piece -Quantity: 12 available -Weight: 0.2 kg
4 different sizes, from stock. Details on the photos. Manufacturer: INTERNOVI Type: PB350 Year of manufacture: 2014 Capacity: 12 m3 Goblet: 350mm - 7.4 liters One with discharge. Explosion-proof, stainless, low noise level. The price refers to 1 complete equipment. Current status: ready for delivery. The equipment is modular. It can also be used and assembled in other ways. Its dimensions can be changed, tailored to the task.
three-phase motor, electric motor -Engine: unused -Power: 75 kW -Speed: 2955 rpm -Protection class: IP 23 -Type: B3-B5 -Shaft: Ø 60 mm -Number: 3x engines available -Price: per piece -Dimensions 900/560/H500 mm -Weight: 396 kg
Three-phase motor, electric motor -Power: 160 kW -Speed: 2960 rpm -Voltage: 500 V (delta) -Protection class: IP 23 -Design: B3-B5 -Shaft: Ø 70 mm -see photo nameplate for further details -Weight: 830 kg
Three-phase motor, electric motor -Power: 7.8 kW -Speed: 2910 rpm -Shaft: Ø 38 mm -Voltage: 500 V -Design: B3/B5 -Protection class: IP 54 -Dimensions: 450/330/H310 mm -Weight: 55 kg
OMEGA CM43 Submerged EDM The OMEGA CM43 submerged EDM is still connected and working perfectly. This machine achieves the highest precision and is an ideal choice for smaller workshops. Working area (mm) 500 x 350 x 300 Electrode size (mm) 100 x 100 x 100 Capacity (kg) 70 Electrode mass (kg) 10 Axis travel: X430, Y320 mm dieletric tank: T4 model power supply: 50A Omega Pulse
electric motor, three-phase motor -Engine: unused -Power: 18.5 kW -Speed: 2930 rpm -Shaft: Ø 42 mm -Design: B3/B5 -Protection class: IP 55 -Quantity: 6 pieces available -Price: per piece -Weight: 110 kg/piece
three-phase motor, electric motor -Condition: unused -Engine data: -Power: 75 kW -Speed: 2970 rpm -Voltage: 380-420 V (delta-star) -Protection class: IP54 -Type: B3-B5 -Shaft: Ø 65 mm -further data see photo type plate -Dimensions: 1030/770/H600 mm -Weight: 610 kg
electric motor, three-phase motor -Input: 415 volts -Power: 55 kW -Speed: 2950 rpm -Shaft diameter: 60 mm -Design: B5 -Protection class: IP 54 -Dimensions: 930/600/H610 mm -Weight: 380 kg
The Apollo Spiral Conveyor Elevator is a specialized piece of equipment used in material handling and packaging processes. Here are some of its key features and functions:, - Space-Saving Design: The spiral design allows for vertical movement of products within a compact footprint, making it ideal for facilities with limited space., - Continuous Flow: It provides a smooth and continuous flow of products, ensuring efficient transportation between different elevation levels (e.g., moving items from a lower level to a higher one)., - Versatile Applications: This conveyor can handle various types of products, including packed bags, boxes, and other materials, making it suitable for a variety of industries such as food, beverage, and logistics., - Gentle Handling: The conveyor design minimizes product damage during transport, which is crucial for fragile items or those that require careful ha ...
A total of explosion-proof 6 low-lift and high-lift trucks as well as 6 manual pallet trucks from the manufacturers Jungheinrich, Still, and Hawker are available.
30 pcs generators with diesel engine Engine Type: Perkins 2506C-E15 TAG2 Power PRP: 500 kVA Power LTP: 550 kVA Year: 2012 Hours: Less than 300 Speed: 1500 1/min Generator: Leroy Somer LL6114F Voltage. 400/231 V, 50 Hz Type: Container Was used as an emergency power system, only ran for test runs and inspections. Subject to prior sale - errors possible! Internal reference number: E-1004-102
including charger 380V-48V-125A Auction-ID: A1-44832-5004
The machine is in very good condition and ready for operation. An on-site inspection is possible.
headroom: 2100 mm Auction-ID: A1-44832-1499
Capacity up to 25 kg per batch Auction-ID: A7-45702-10
Wheelchair-accessible silo system from Hedemann in a stable design. The facility was purchased new in 2016 for 100k and is in very good condition. Filling from below is carried out by an elevator. At the top, the distribution to the two silos is controlled via a folding box. The smooth silo inner walls make the silos easy to clean, which is positive for product changeovers. 2x 25 t (bulk density pellet 800 kg/m³), built in 2016 If you are interested, please write to us and you will receive further detailed information.
turning length: 1000 mm turning diameter: 350 mm turning dia. in gap: 450 mm spindle bore: 40,0 mm turning speeds: 70 - 2000 U/min bed width: 180 mm spindle taper: 55029 D 1-4 taper in tailstock: 3 MK quill travel: 110 mm total power requirement: 1,5 kW weight of the machine ca.: 529 kg. range L-W-H: 1730x700x1340 mm Scope of delivery: - 3-axis digital display i200 with LCD display - 3-jaw chuck DK11-160 mm / D4 - Face plate 200 mm / D4, according to DIN 55029 - Fixed steady rest - passage diameter max. 60 mm - Follow-on steady rest - passage diameter max. 60 mm - Clamping plate 250 mm - Quadruple tool holder - Shaft fixing device - Protection device for tool holder - Slip clutch - Micrometer longitudinal stop - Coolant device - Extendable chip tray - Frequency converter - Foot pedal with brake function according to CE - Splash guard - Thread gauge - LED machine light - Digital speed dis ...
turning length: 850 mm turning diameter: 400 mm swing diameter over bed slide: 245 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 260 mm spindle taper: DIN 55029 D 1-5 taper in tailstock: 3 MK quill travel: 120 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1255 kg range L-W-H: 1900 x 1000 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-200 mm / D5 - Clamping disk 320 mm - Fixed steady rest - passage diameter max. 130 mm - Follow-on steady rest - passage diameter max. 100 mm - Coolant system - Quick-change tool holder with 4 inserts - Protective device for quick-change tool holder - Micrometer longitudinal stop - Slip clutch - Motor with magnetic brake in accordance with CE standard - Initial filling with Shell Tellus 46 - Extendable chip tray - LED machine light - Change gears - Reduction sleeve - 2 cente ...
turning length: 1500 mm turning diameter: 420 mm swing diameter over bed slide: 255 mm turning dia. in gap: 580 mm spindle bore: 52.0 mm turning speeds: 45 - 1800 U/min bed width: 250 mm spindle taper: DIN 55029 D 1-6 taper in tailstock: 4 MK quill travel: 140 mm total power requirement: 3.0 / 4.5 kW weight of the machine ca.: 1400 kg range L-W-H: 2570 x 900 x 1600 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck DK11-200 mm / D6 - Clamping disk 350 mm - Fixed steady rest - passage diameter max. 135 mm - Follow-on steady rest - passage diameter max. 65 mm - Coolant system - Quadruple tool holder - Protective device for quadruple tool holder - Micrometer longitudinal stop - Slip clutch - Turret stop with fine adjustment - Thread gauge - Motor with magnetic brake according to CE standard - Foot pedal with brake function according to CE - Initial filling with Sh ...
turning length: 1500 mm turning diameter: 560 mm turning diameter over slide: 350 mm turning speeds: 25-220/220-1500 U/min swing diameter over bed slide: 350 mm turning dia. in gap: 785 mm quill travel: 185 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 quill:: 5 MK weight of the machine ca.: 2420 kg. range L-W-H: 2840 x 1150 x 1610 mm Equipment: - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Fixed steady rest - passage diameter max. 180 mm - Follow-on steady rest - passage diameter max. 120 mm - Foot pedal with brake function according to CE - Protective device for quick-change tool holder - LED machine light - Initial filling with Shell Tellus 46 - Clamping disk 450 mm - 2 centering points - Frequency converter - Digital speed display - Slip clutch - Rapid traverse longitudinal and planar - Coolant system - Quick-change ...
turning length: 3000 mm turning diameter: 660 mm turning dia. in gap: 870 mm turning diameter over slide: 420 mm turning speeds: 36 - 1600 U/min quill:: 5 MK quill travel: 150 mm spindle bore: 105,0 mm engine output: 7,5 kW spindle taper: DIN 55029 D 1-8 weight of the machine ca.: 3990 kg. dimensions: 4500 x 1280 x 1650 mm Scope of delivery - Slip clutch - Rapid traverse longitudinal and planar - LED machine light - 3-axis digital display ES-12 V with LCD display - 3-jaw chuck PS3-315 mm / D8 - Clamping disk 630 mm - Fixed steady rest - passage diameter max. 250 mm - Follow-on steady rest - passage diameter max. 110 mm - 1 centering point / 1 follow-on punch point - Motor with magnetic brake in accordance with CE standard - Foot pedal with brake function in accordance with CE - Initial filling with Shell Tellus 46 - Coolant system - Quick-change tool holder with 4 inserts - Protective de ...
maximum number of results exceeded
please refine your search
50 € 
