128,858 used machines on RESALE, but how to find them? Machine Search
TGW alignment conveyor inclined roller conveyor 1750-475-420 RA2406 Make: TGW Year of manufacture: 2012 Roller width (RB): 420 mm Nominal/outer width (NB): 475 mm Length: 1750 mm Diameter rollers: 50 mm Distance between rollers: 60 mm Roller conveyor motor: SEW drive motor frame height: 130 mm Conveyor speed: contact us Angle rollers: ca. 5° Optional: supports Side guide adapted conveyor speed range with frequency converter Price plus VAT ex central warehouse Dr. Sonntag GmbH & Co. KG 97076 Würzburg Features: Construction year: 2012 condition: gut nominal voltage: 380-500V angle: ca.5° Conveying length in mm: 1750 Nominal / outside width in mm: 475 Roll width in mm: 420 Roll division in mm: 60 Driven: YES Engine type: SEW Eurodrive Conveyor speed m / s: bitte Kontaktieren scope of delivery: ohne Frequenzumrichter, without supports and side guides For individual, expert advice, simpl ...
Offered is a WrapAroundPacker 420 / Combiline. Application area: Packaging of individual containers, Cycle rate max: 50cycles/minute, Format flexibility: 0.33l, 0.5l, Preserving jars, Adhesive system: Spot or line hot melt application system, Inspection by appointment possible.
Electric convection oven, make KellerIhne Max. temperature: 420°C Internal dimensions (W x D x H): 400 x 500 x 400 mm Connected value: 4,5 kW
Engine Brand: VOLVO, Conditie: USED, Nominal Power @ Nominal Rpm: 309 Kw, Bore: 131 mm, Qty Cylinders: 6 Qty, Engine Cooling Type: Radiator Cooled (std) , Engine Color: Green , Flywheel Housing SAE: SAE 1 , Flywheel SAE: Unknown , Turbo Type: Dry , Exhaust System: Dry , ECU Present?: yes , Starter Voltage: No Starter Present , Rated Power: 309 Kw, Rated Speed: 1800 Rpm, Injection Type: ECU (Electronic Control Unit) , , https://www.hamofa.com/stock/diesel-engines/volvo-d12a-420-used/317, , = More information =, , Type: Engine, Type number: D12A 420; Transport weight [kg]: 1140
A Zionair sandblasting cabin is available. Cabin volume: 420l, internal dimensions X/Y/Z: 1200mm/600mm/580mm, max. workpiece weight: 40kg. Machine dimensions X/Y/Z: approx. 1300mm/950mm/1700mm, weight: approx. 125kg. An on site inspection is possible.
Two induction sealing machines are available. 1) Shandong Better Onward Machinery LGYF-2200, foil material: aluminum, container material: nonmetallic bottles, sealing diameter range: 20mm-150mm, bottle height range: 20mm-600mm, sealing capacity: 120-300bottles/min, machine dimensions X/Y/Z: approx. 750mm/650mm/1600mm, weight: approx. 50kg. 2) Guangzhou Dingwei Machinery DW-4200, sealing diameter range: 15mm-130mm, bottle height range: 50mm-350mm, machine dimensions X/Y/Z: approx. 700mm/750mm/1400mm, weight: approx. 40kg. Documentation available. On-site inspection is possible. The images are samples.
Key data: 4200 kN, 2 g/PS, 80 mm
1.0 St. gebr. Injection Molding Machine Manufacturer: KRAUSS MAFFEI Type: KM420-4300CX Year of Make: 2012 Clamping force: 420 tons Spar spacing 800 x 800 mm Screws DN: 80 mm Max. displacement: 1,810 cm³ Moulded part weight: 1,647 g/hp Control: MC6 Equipment: 2 pcs core train Interface Robot 12-way hot zone channel control Interface temperature control unit
roll diameter: 420 mm throat: 410 mm saw band length: 3150 - 3260 mm saw band width: 3-16 weight: ca. 600 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
An Arburg injection molding machine with a rotary unit on the moving mold half is available. Column spacing: 420mm, clamping force: 1000kN, opening force: 250kN, opening stroke: 500mm, min. mold installation height: 250mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Injection unit 350, screw diameter: 35mm/40mm/45mm, max. shot volume: 230cm³, max. injection pressure: 2500bar. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2750mm, weight: approx. 4500kg, operating hours: approx. 75443h. Documentation available. On-site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen spacing: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1700mm/2100mm, weight: approx. 3500kg. Documentation available. On site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 1300kN, opening stroke: 500mm, min. mold installation height: 250mm, mounting plate distance: 750mm, tie bar spacing X/Y: 420mm/420mm, platen dimensions X/Y: 605mm/605mm, max. mold weight: 650kg, ejector stroke: 175mm. Machine dimensions X/Y/Z: approx. 4350mm/1650mm/2100mm, weight: approx. 4300kg, operating hours: approx. 80131h. Documentation available. On-site inspection is possible.
A vertical injection molding machine Arburg with a horizontal injection unit is available. Clamping force: 800kN, opening stroke: 500mm, min. mold installation height: 250mm, platen distance: 750mm, platen dimensions X/Y: 570mm/570mm, max. mold weight: 600kg. Machine dimensions X/Y/Z: approx. 4300mm/1700mm/2100mm, weight: approx. 3500kg, operating hours: 44117h. Documentation available. On-site inspection is possible.
used
Recon Part Number: 350516 Cylinders 1-10 J 420 A-Version Attention: We also have various other RECON parts from different manufacturers / types available. We will be happy to send you our current stock list. ---------------------------------------------------------------------- ----------- Sale only to commercial customers! ---------------------------------------------------------------------- ------------ If you have any further questions, please do not hesitate to contact us!
This 4-axis DMG CTX 420 Linear V6 was manufactured in 2002. It features a Siemens 840D Powerline control, VDI 40 tool holder, Y-axis, chip conveyor, and a counter spindle. The machine has been fully overhauled by Eichten Werkzeugmaschinen GmbH, ensuring it is in perfect condition. If you are looking to get high-quality turn-mill capabilities, consider the DMG CTX 420 Linear V6 machine we have for sale. Contact us for more information.
This Behringer HBP 420-723 G Metal Band Saw was manufactured in 2004. It features a Silberland B 660 / 15 m powered roller conveyor from 2010 and has operated for approximately 15,800 hours. The saw offers a cutting speed of 10-120 m/min and is powered by a 5.5 kW saw drive motor. Ideal for handling a variety of cutting sizes and angles. Contact us for more information about this machine.
This 3-axis Correa XB-420 Bed Type Milling Machine was manufactured in 1990. Ideal for precision milling, it offers robust construction and reliable performance. Consider the opportunity to buy this Correa XB-420 Bed Type Milling Machine. Contact us for more information.
This 4-axis Lorenz LS 420 was manufactured in 2008. It features a NUM control system, capable of handling external and internal splines, single points, and segment splines. It can manage spline jointing up to B = 25 mm and spline hub profiles. The stroke length is 140 mm. Consider the opportunity to buy this Lorenz LS 420. Contact us for more information.
saw blade diameter: 420 mm capacity 90 degrees: round: 130 mm capacity 90 degrees: flat: 160 x 100 mm capacity 45 degrees: round: 110 mm capacity 45 degrees: square: 130 x 80 mm turning speeds: 3000 U/min engine output: 2,0 kW total power requirement: 2,0 kW weight of the machine ca.: 190 Kg dimensions: 3,0 x 1,0 x 1,3 m Underfloor aluminum circular saw - Hydropneumatic semi-automatic - pneum. Workpiece clamping device The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
This DEMAG Ergotech System 420-1450 was manufactured in 2004. It is a hydraulic injection moulding machine, ideal for precision plastic processing. Consider the opportunity to buy this DEMAG Ergotech System 420-1450 hydraulic injection moulding machine. Contact us for more information.
Key data: 1497 KW, 1870 kVA, 10500 V
Brand new Jenbacher generators straight from the factory. Fast delivery, warranty, and a warm welcome. write +38 0503239922 WhatsApp smartnrggroup@gmail
This DEMAG Concept 420/810-2300 Injection moulding machine was manufactured in the year 2006 in Germany. It is equipped with a Ergo control unit. The machine has a screw diameter of 60 mm, a stroke volume of 891 cm³, a injection pressure of 2420 bar, a shot weight of 800 g/PS and clamping force of 4200 kN. The distance between bars are 800x710 mm and the size of mould platens 1200x1100 mm.
This Arburg 420A 1000-400 was manufactured in 2007. It features electromechanical main movements by servo drives, a modular plasticizing unit with adaptive temperature control, and a five-point double toggle clamping system with servo-electric adjustment. The Selogica control system enhances operational efficiency. If you are looking to get high-quality injection molding capabilities, consider the Arburg 420A 1000-400 machine we have for sale. Contact us for more information about this machine.
This 3-axis Gildemeister CTX 420 linear was manufactured in 2003. It features a max turning diameter over bed of 680 mm and a chuck diameter of 250 mm, suitable for diverse turning tasks. Equipped with a bar feeder and driven tools, it enhances productivity and precision. If you are looking to get high-quality turning capabilities, consider the Gildemeister CTX 420 linear machine we have for sale. Contact us for more information about this machine.
Feed motor: 5,5 kW total power requirement: 58,3 kw weight of the machine ca.: 4000 kg The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Injection moulding machine Arburg 420C 1000-290 BJ 2007
This Arburg Allrounder 420C 1000-290 was manufactured in 2014. It features a clamping force of 1000 kN, an opening stroke of 500 mm, and a platen size of 570x570 mm. Max shot weight is 132 g. Consider the opportunity to buy this Arburg Allrounder 420C 1000-290 hydraulic injection moulding machine. Contact us for more information.
Key data: 800 kN
Demag Ergotech System 80/420-430 Year of Make: 2006 Injection unit: Screw diameter: 40 mm Injection weight: 205 g Spray pressure: 2020 bar Dosing volume: 231 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 580x590 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC4 Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 3 Control with hot runners Hardened injection unit - Bimetal Built-in printer It is possible to change the screw diameter Dimensions: Weight: 4100 kg Length/Width/Height: 4.10x1.40x1.90 m All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
This Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine was manufactured in 2012. It features a clamping force of 4200 kN and a platen size of 1200 mm x 1200 mm. The machine includes an injection unit with a screw diameter of 80 mm and an injection pressure of 2205 bar. Consider the opportunity to buy this Krauss Maffei 420 - 4300 CX hydraulic injection moulding machine. Contact us for further details.
Key data: 1000 kN
Sumitomo Demag Systec 100/420-310 with the Sepro SR SDR11 S3 TRANS robot / hybrid machine Year of Make: 2013 Injection unit: Screw diameter: 35 mm Injection weight: 149 g Spray pressure: 2024 bar Dosing volume: 168 ccm Clamping unit: Clamping force: 100 t Spar spacing: 420x420 mm Size of the clamping plates: 600x600 mm Ejector: hydraulic Clamping unit: hydraulic Control: NC5 Additional equipment: Hybrid machine: high-speed, energy-saving and very quiet Operating hours: approx. 38,000 h in automatic mode Robot interface Air Valve x 2 Hydraulic core pull x 1 Hardened injection unit - Bimetal Main motor of the machine - Servo motor driven by inverter - Energy saving Built-in printer Machine has been regularly serviced by the authorized service Sumitomo Demag Robot Sepro SR SDR11 S3 TRANS Year of Make: 2013 5-axis robot: 3 axes are driven by servo motors (el ...
Key data: 800 kN
Arburg 420C 800-250 Year of Make: 1999 Injection unit: Screw diameter: 35mm Injection weight: 121 g Spray pressure: 1820 bar Dosing volume: 144 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Very good technical condition Machine has produced injection molded parts for the medical industry - pure production conditions Euromap 12 Robot interface Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participa ...
Arburg 420C 800-250 with the Wittmann W721 robot Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Air Valve x 2 Hydraulic core pull x 2 Control with hot runners Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Built-in system for printing quality control from the Kistler brand sensor - measurement of tool pressure Original Tool Crane Robot Wittmann W721 Year of Make: 2007 4-axis robot: 3 axes are driven by servo motors (electric); Axis C Travel in axes: X-550, Y-1200, Z-1250 Touch control panel Robot with adapter Pu ...
This Krauss Maffei 420-3000 CX was manufactured in 2011. A robust hydraulic injection molding machine from Germany, it features a clamping force of 4200 kN and a screw diameter of 80 mm. It supports a shot weight for PS of 1464 g and an injection rate of 478 cm³/s. Ideal for high-volume production with its 1200 cycles/h dry cycle rate. Contact us for more information about this machine.
used
Key data: 800 kN
Arburg 420C 800-250 with the Anvil+Langbein sprue picker Year of Make: 1999 Injection unit: Screw diameter: 40 mm Injection weight: 158 g Spray pressure: 1390 bar Dosing volume: 188 ccm Clamping unit : Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Control with air valve Core train control Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On ...
Key data: 800 kN
Arburg 420S 800-350 Year of Make: 2003 Injection unit: Screw diameter: 50 mm Injection weight: 250 g Spray pressure: approx. 1300 bar Dosing volume: 288 cc Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 1 Core train control Hardened injection unit - Bimetal Proportional valve on the injection unit – precise injection Integrated original Arburg sprue picker on the side Dimensions: Weight: 3800 kg Length/Width/Height: 4.06x1.39x2.12 m Drive: Pumps/motor: 18.5 kW Heating capacity: 10.2 kW Total power: 28.7 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or ...
Arburg 420C 800-250 Year of Make: 2004 Injection unit: Screw diameter: 30 mm Injection weight: 89 g Spray pressure: 2470 bar Dosing volume: 106 ccm Clamping unit: Clamping force: 80 t Spar spacing: 420x420 mm Size of the clamping plates: 570x570 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 67 Robot interface Hydraulic core pull x 1 Hardened injection unit - Bimetal Dimensions: Weight: 3180 kg Length/Width/Height: 4.30x1.64x2.08 m Drive: Pumps/motor: 15 kW Heating capacity: 6.5 kW Total power: 21.5 kW All offered machines are started by our service technicians before they are sold. It is possible to receive a video of the technical tests of the selected machine or to participate in live technical tests at our company in Łódź. Price: On request
Arburg 420C 1300-675 with the Star Sprue Picker Year of Make: 2002 Injection unit: Screw diameter: 50 mm Injection weight: 297 g Spray pressure: 2080 bar Dosing volume: 353 ccm Clamping unit: Clamping force: 130 t Spar spacing: 420x420 mm Size of the clamping plates: 605x605 mm Ejector: hydraulic Clamping unit: hydraulic Control: SELOGICA Additional equipment: Euromap 12 Robot interface Air Valve x 2 Hydraulic core pull x 2 Hardened injection unit - Bimetal Type of injection unit: Vario - This offers the possibility of using the injection unit, e.g. for side spraying Covers from the operator's side open automatically Dimensions: Weight: 4330 kg Length/Width/Height: 4.80x1.64x2.08 m Drive: Pumps/motor: 30 kW Heating capacity: 14.9 kW Total power: 44.9 kW All offered machines are started by our service technicians before they are sold. It is poss ...
Inc. software, PC and monitor! • Up to 305 mm/s at 1600x800 dpi • Up to 152 mm/s at 1600x1600 dpi • Max. print width 1067 mm • Max. print length 15 m • Prints on thick media up to 16 mm Specifications per manufacturer!
bed width: 350 mm turning length: 1.000 mm control: Manual plus 620 Heidenhain greates pass round over bed: 430 mm Swing dia. over traverse guideway: 220 mm Main spindle:: turning speed range - main spindle: 1 - 3.600 min/-1 power capacity - main spindel: 9 / 11 kW max. Torque: ca. 200 Nm spindle head: DIN 55027 / 6 spindle diameter in front bearing: 110 mm spindle bore: 80 mm usable bar diameter: max. 80 mm Tool Mount:: System: MultiFix Shank diameter: 20 x 20 mm axis stroke:: x-axis: 230 mm z-axis: ca. 1.000 mm Tailstock:: diameter of quill: 70 mm quill stroke: 150 mm taper of center: MK 5 steady: hollow: fix: 12 -150 mm hollow: var: 12 -125 mm feeds:: rapid traverse: X: 10 / Z: 7 m/min feed power: X: 4 / Z: 5 kN total power requirement: - kW weight of the machine ca.: 3,2 t dimensions of the machine ca.: 2,8 x 2,1 x 1,9 m Documents: Tailstock: steady rest: 1x Coolantsystem: M ...
Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Carl Wezel Cold Rolling Mill BW500/420 Strip Rolling Mill Overhauled Manufacturer: Carl Wezel Maschinen- u. Werkzeugfabrik Type: BW500/420 Year of Make: 1975 Machine Type: Cold Rolling Mill / Strip Rolling Mill Modernization: Bühler-Würz Kaltwalztechnik GmbH Type: Wezel Rolling Mill Year of Make: 2015 Operating Voltage: 3AC 400V Frequency: 50 Hz Total connected load: 25 kVA Total current: 36 A Control voltage: DC 24V Location: Pforzheim
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.08.2003 Category: Truck Body name: semi-trailer Exterior color: blue Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Drive: 6 x 2 Certificate of Registration: EM250897
In good condition, the price is negotiable. It is located in Jõhvi. First registration: 12.04.2006 Category: Truck Body name: semi-trailer Exterior color: green Engine: 11705 cm³ Motor power: 309 kW Fuel: diesel Transmission: Manual Drive: Rear Certificate of Registration: EN403451
Working width 180 - 3200 mm, electronic setting Sieb & Meyer Fixed side at the left Chain transport, 80 mm wide Infeed for panels of about 1 m. Top pressure by driven belts Max. workpiece thickness: 80 mm Feedspeed 7 - 35 m/min, motor 2,2 kW Pop-up dogs every 1m10 Equipment left / right: 1 st post Front: 1+1 Jump scorer, motor 1,5 kW, 100 Hz, joined to 1+1 Hogger, motor 3 / 4,4 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz 2nd post Front: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz Rear: 1+1 Fixed milling, tilting, motor 2,2/3,3 kW, 50/100 Hz 3th post Front: 1+0 Jump milling, tilting, motor 2,2/3,3 kW, 50/100 Hz Rear: 1+1 Jump milling, tilting, motor 1,5 kW, 100 Hz All units with horizontal/vertical adjustment and Siko read-out Outfeed chain approx. 80 cm length Sound and safety enclosures
Puller Cloths 4200x570mm NEWProductor Dimensions : W: 4200mm D: 570mm6 EyeletsWe have different large puller wipes in stockDetails see picture Please measure your wipes from one side to the other after purchase, an exchange or return is excluded, it is only for tradespeople.
Bread Slicer Machine Gate JAC Tabletop Device Manufacturer : JAC Model : MCO 420/11 mobile 240 Volt Details see picture
Nilpeter FB 4200 S UV dryers (GEW) all stations Corona Treater 2 Die Stations Sheeting Station Roll Lift 1 Waste Rewind 1 Product Rewind with Roll lift Magnetic Dies
A nearly new and high-precision CNC centerless grinding machine Monzesi is available. Grinding wheel outer diameter min./max.: 406mm/280mm, inner diameter: 152mm, max. width: 200mm, speed: 2100rpm, power: 11kW. Regulating wheel outer diameter min./max.: 160mm/254mm, inner diameter: 115mm, max. width: 200mm, speed: 285rpm. Workpiece diameter: 100mm, workpiece length: 200mm, regulating wheel axial adjustment: +/-10mm, taper setting: -2°/6°, tilt adjustment: +/-5°, accuracy: 0.0001mm. Machine dimensions X/Y/Z: approx. 3800mm/2000mm/21500mm, weight: approx. 4500kg, control: CNC Fanuc 35i-B Digital. Documentation available. An on-site inspection is possible.
Frequency converter, frequency converter, drive converter, controller, variable speed drive -Type: Micromaster 420 6SE6420-2UD17-5AA1 -max. power: 0.75 kW -Input: 380 - 480 V 10% -10% 3ØAC 3.7 A 47 - 63 Hz -Output: 0-Input V 3ØAC 2.1A 0-650Hz -Protection class: IP 20 -Quantity: 1 piece available -Dimensions: 73/150/H173 mm -Weight: 1 kg
maximum number of results exceeded
please refine your search
