natural used for sale

Make and Model: MAN E3268L E212 Fuel: Biogas/Natural Gas Year: 2017 Hours: 0 Capacity kW: 370 HZ: 50 Voltage: 400V Scope of supply: Engine, Alternator, Base Frame, Gas Line, ComAp Control System, Motortech Ignition boxes, Heat Exchanger and all the associated equipment. More details below . 1 x IV 8 control screen 1x AIO-NTC-BB - Base Box with AFR dongle 1 x InteliDrive Mobile MAN logger unit 2 x I-IO8/8 Binary input/output cards 2 x I-AIN8 analogue input cards 1 x I- AIN8TC thermocouple input card 1 x DN 100 throttle body with stepper motor and wiring harness 3 x Varistep 3 controllers - the system only needs 2 1 x Varifuel 2 gas mixer and all the adapters, bolts and gaskets 1 x Detcon 20 Knocking controller with 8 knock sensors and cables 1 x MIC 4 ignition controller with output harness 1 x Cam pick up with harness 1 x speed pickup with harness 1 x Set o ...

filling monoblock FIMER | 9V Year: 1995 Speed: 1.200 bph Direction: Clockwise 9 Filling valves Single capping head Natural straight cork Vacuum system before capping Safety protections.

Filling monoblock ALFATEK 24.4 Year: 2003 Speed: 4.000 bph Direction: Clockwise Filler 24 valves Corker 4 heads – Natural straight cork Safety protections

Filling monoblock FIMER 12.16.1.1S/VA – 2008 Year: 2008 Speed: 3.000 bph Direction: Clockwise Rinser 12 clamps Single treatment Fixed nozzle Filler 16 valves Single head corker for natural straight cork Predisposition for a second capping turret Safety protections

Filling monoblock FIMER 9.1 Year: 1984 Speed: 1.000 bph Direction: Clockwise. Model: RT9/1. Filler 9 valves. Single head corker – Natural straight cork. Bottle accumulation table.

filling monoblock BERTOLASO 48.60.12 Year: 1997 Speed: 13.000 bph Direction: Clockwise Rinser 48 clamps Fixed nozzle Double treatment Filler 60 valves Corker 12 heads. Natural straight cork. Safety protections

Filling monoblock ALFATEK 15.1 Year: 1990. Speed: 2.000 bph. Direction: Clockwise. Filler 15 valves – gravity filling. Single head corker – natural straight cork Safety protections.

filling monoblock BERTOLASO 45.60.9 Year: 2001 Speed: 13.000 bph Direction: Counterclockwise Rinser 45 clamps Mobile nozzle Double treatment Filler 60 valves Corker 9 heads Natural straight cork Safety protections

Waffle baking machine consisting of: - Leaf removal station -Control panel - Dough infusion station - Baking chamber - Burner equipment - Exhaust system with exhaust pipes - Service door - Waste scraper - Inlet conveyor -Switchboard - Waffle leaf relaxation The machine configuration is based on a wafer bread production concept. That is, wafer sheets are made and sliced. Optionally, we can add a cutting machine and a packaging machine to complete the line. The product looks and is used like a WASA crispbread, but is a waffle and much softer. Waffle bread is an interesting alternative to regular bread and not just a snack, but a real foodstuff. Height: 2450 mm Length: 16450 mm Depth: 1900 mm Baking plate format: 470 x 290 mm Pattern: Pimples Waffle sheet thickness: 4.8mm Electrical connection: 400 V/ 50 Hz Control: Siemens S 7 Baking plate heating: natural  ...

Filling monoblock CUSTOM 9.12.1 Year: 1999 Speed: 1.500 bph Direction: Clockwise Model: FAMILY LD - 09.12.1 Rinser 9 clamps -Single treatment -Fixed nozzle Filler 12 valves – gravity Single head corker – natural straight cork Safety protections

Golden roaster 15kg Automatic manufactured in 2019 with less than 10 tons roasted. Including green coffee lift with scale and destoner All parameters are electronically adjustable on the monitor: - burner power - drum rotation speed - air flow - cooling power - cooling arm rotation speed - green coffee lift airflow - destoner airflow Recipes can be saved and reproduced automatically with the HMI Compatibility with Artisan and Cropster softwares Low consumption premix burner compatible with natural gas and LPG Single phase 220V 50-60Hz electricity Good quality components (Italian motors and gearbox, Beijer HMI and variable frequency drive, Combhex burner, Schneider and Siemens electrical parts, etc.) Help for the installation and training possible with extra cost depending on the location Inspection possible in production

Filling monoblock MBF 18.18.1.1 Year: 2006 Speed: 3.000 bph Direction: Clockwise Rinser: 18 clamps Single treatment Fixed nozzle Filler 18 valves – low vacuum Injection of bottled gas Corker single head – natural straight cork Vacuum and gas before closing the cap. Capper single head – stelvin cap Injection of gas on the cap before closing Safety protections.

Key data: 999 , 400

4 x MTU 8V4000 GS MIP + MMC for sale. Series 4000 four-stroke turbocharged gas engine with mixture cooling - compact, high performance, reliable, maintenance-friendly and extremely economical. Lean mixture technology, state-of-the-art electronic ignition system with individual ignition timing and automatic ignition power control, anti-knock control as well as highly responsive mixture and load control ensure economical and safe genset operation with optimum use of the energy input. Island operation capability. Make and Model: MTU 8V4000 GS MIP Capacity: 999kW Hours: 0 Year: 2023 Fuel: Natural Gas V: 400 HZ: 50 Scope of supply: Engine, Alternator (Stamford), Base frame, MIP (MTU Interface Panel), MMC (MTU Module Control - The MMC contains the cogeneration control system including mains monitoring, visualization and user interface). Price: €285,000 each Plea ...

Bergen Rolls Royce B35:40V20AG complete gas power plant Year of Make 2011 running hours: 16.380 Hours 8415 Kw 11kV 50 Hz at 750 RPM with AVK DIG 167 f/8 alternator 9100 kvA Complete power plant with all auxilaries: Control Air Compressor ,Self Demand Transformer, LT cooling water system, cooling tower, HT cooling water system, cooling tower, cooling fans, Start Air Compressors and Air tank, Natural Gas Regulator Unit, Emergency Diesel Generator 220 kVA, piping systems oil filter and heater exchangers, Neutral Earthing Resistor Unit, Generator Cooling Fans, Steam Boiler: Nooter/Eriksen Capacity: 5.5 T/h, Switchgear Units, engine tools, instruction manual and more... Please contact for more info and complete scope / offer

Filling monoblock GAI 12.12.1 – still wine Year: 1996 Speed: 2.500 bph Direction: Clockwise Rinser 12 clamps Filler 12 valves Corker single head – Natural straight cork Safety protections

Used cooking kettle, 570 liters -as new- - only 1 year in operation - heavy industrial version - Boiler made of chrome-nickel steel - Low energy due to full insulation - self-supporting, no iron frame - insulated double lid with chrome-plated Echtermann hinge - Lid opening possible in any position - Safety outlet tap 1 1/2 - automatic control - Preselection and operating time clock - Core temperature control - separate control cabinet - Natural gas, via fan burner (HERMANN, type: HG75) - Condition: as new, checked and prepared - Original price: EUR 14.600,- - Delivery, assembly and instruction EUR 890,- - Conversion to oil heating possible (on request) Specifications: - Boiler capacity: approx. 570 L. - Internal dimensions: W 1,000 x H 910 mm - External dimensions: W 1,300 x D 1,250 x H 910 mm Free from March 2023 The cooking kettle is in mint condition and ...

Filling monoblock BERTOLASO 54.75.12.12 Speed: 15.000 bph. Direction: Clockwise. Rinser 54 clamps JETMATIC. Single treatment. Fixed nozzle. Filler 75 valves BERTOLASO – gravity. Capper 12 teste – stelvin cap. Corker 12 teste BERTOLASO – Natural straight cork. Safety protections.

Natural gas CHP with 20 kW electrical power of the company KW Energie. Koplett with acoustic hood and external sound absorber

Flake ice machine + storage silo Manufacturer: MAJA Type: RVH 1500 CO2 The flake ice machines of the MAJA RVH-CO2 series can be integrated into refrigeration concepts that are designed for environmental compatibility and sustainability. This is because CO2 / R744 is one of the natural refrigerants, without any influence on the depletion of the ozone layer or the greenhouse effect. Specifications: Year of construction: 2019 Ice capacity approx. 1500 kg / 24h Water consumption 1.50 m³ /24h Required cooling capacity to - 20.0°C / 1.8 kW Refrigerant CO2 / R744 Width 1695 mm / Depth 512 mm / Height 525 mm Weight 175 kg Electrical connection 3AC/50Hz/400V/PE0.28 kW Control: Maja Touch Panel (optional) Overall dimensions of the system: H223 x W180 x D125 cm Machine design Ice generator unit (rotary evaporator) without refrigeration unit for direct ...

CHP Power Plant 800 kWe with 2xMWM TCG 2016V08 Gas Gensets Good condition and low operating hour 800 kWe / 400 V / 50 Hz combined heat and power (CHP) plant running on natural gas or biogas. The plant was delivered by MWM in 2011 and it operation was closed in 2021. Thermal energy is in form of hot water at 90°C and currently used for district heating purpose. Due to the low amount of biogas, cogeneration plant worked at low capacity (30-40%), and not around the clock. It has a complete gas treatment and mixing system to utilize biogas from landfilling which has 40 – 55 % of CH4. Power generators are installed in two soundproof containers, TEAM Evo WMW power plant control system and all electric switches and control cabinets are installed in separate control room. Heat recovery system is built next to genset containers. Both units have separate cooling radiators for engine cooling ...

Filling monoblock MBF 50.70.12.10 Year: 2003 Speed: 16.000 bph Direction: Counterclockwise Model: 50.70.12.10 – gravity filling Rinser 50 clamps Fixed nozzle Double treatment Electropneumatic valves System to aspire water’s drops by vacuum pump Filler 70 valves Electropneumatic filling valves Adjustment levels by electric panel Corker 12 heads – Natural straight cork Capper 10 heads – Crown cap 26mm CIP washing Dust’ aspire system Universal cochlea Touch screen Hour been used: 4.000 Safety protections.

Filling monoblock MBF 25.30.6.3 Year: 2004. Speed: 6.000 bph. Direction: Clockwise. Model: 25.30.6.3. Rinser 25 clamps: Fixed nozzle Single treatment. Filler 30 valves – low vacuum Pre-evacuation system Corker 6 heads – natural straight cork. Capper 3 heads – screw cap 31.5x20. Safety protections.

working table size: 3000 mm x 1300 mm; emergency stop switch: no; operational vacuum: -0,85 bar; vacuum pump output: 25 m³/h; pump capacity: 0,75 kW; noise level: 70 Db; heating system temperature: max. 60 °C; heating system: 4,5 kW; machine length: 3100 mm; machine width: 1450 mm ; machine height: 1650 mm; weight: 450 kg; The membrane presses of VP series are optimal solution for woodworking and a furniture production from all types of wood. The vacuum presses are equipped with heating system which allows reduce the time of drying glue and increase productivity of production. The heating temperature monitored and maintained automatically. The membrane presses of VP series can be used for small capacities but also for professional using. Construction The sturdy welded construction with a removable feet’s. Work table from 12mm HPL board.   Heating Heating system ...

Filling monoblock 32.4 CUSTOM 32.4 – ISOBARIC Year: 1997 Speed: 4.000 bph on still wine 2.700 bph sprkling wine 2.000 bph on champagne. Filler 32 valves isobaric: Pre-evacuation Self-leveling Degassing. Corker AROL 4 heads: Natural straight cork Mushroom cork. Safety protections.

Engine Make Jenbacher Engine Type 620 Power KW/RPM 2801/1500 Fuel Natural-Gas Generator Model 400 Volts Hz 50 Year of Manufacturing 2001 Running Hours 75.000 GAS POWER HOLLAND 00316 38 63 90 71

Weishaupt Dual Fuel Burner -mu Type WM-GL20/4-A with digital combustion manager WFM Version ZM-R-3LN (SuperLowNox) Power range (N-gas) 300 - 2450 kW Power range (EL) 350 - 2450 kW Fully automatic on the oil side and gas side in a sliding step or modulating depending on the type of power control. Control range on the gas side up to 1:8 possible. Control range on the oil side up to 1:5 possible. for the combustion of heating oil EL according to DIN 51603 and natural gas according to DIN DVGW worksheet with the following components: Burner housing Blower with three-phase motor Integrated speed module for controlling Frequency converter (included) Combustion air control with drive Fuel system best. made of high-pressure gear pump with Pressure regulating valve, electrosolenoid valves as Quick-closing device nozzle stock and nozzle Magnetic coupling for shutting off the oil ...

Filling monoblock CERMA 20.20.1 Year: 2000 Speed: 2.000 bph on sparkling wine 3.000 bph on still wine. Direction: Anticlockwise. Rinser 20 clamps Single treatment. Fixed nozzle Filler 20 valves – isobaric Pre-evacuation Degassing Corker single head AROL: Natural straight cork Mushroom cork. Safety protections. Totally reconditioned (2016)

KÄRCHER ROBO 30 pipe boring machine for pipes, flat material and profiles With this machine, tubes, flat material or profiles can be cut very quickly and accurately in a single pass. can be drilled or milled at an angle or at an angle up to  50° in such a way that filling rods or filling tubes up to 1" can be drilled or milled can be plugged through. With the standard additional clamp for the jaw chuck, you can not only cut pipes, but also transport flat material or other profiles with the feed and at the desired angle up to over Make 50° single-sided holes or through holes. The clamping jaws in the self-centering vice have a recess at the top for flat material. We are unrivalled when it comes to converting to another material! The feed is positioned at 0.1 mm with the counter with absolute or chain gauge. With the ROBO 30, you don't need to set limit switches or cams for ...

Filling monoblock ALFATEK 15.1 Year: 1993. Speed: 2.000 bph. Direction: Clockwise. Filler 15 valves – gravity filling. Single head corker – natural straight cork. Safety protections.

Engine Make MWM Engine Type TCG 2020 V16 K Power KW 1500 KW RPM 1500 Fuel Natural Gas Volts 400 Hz 50 Year of Manufacturing 2011 Running Hours 0 NEW GENERATOR SET GAS POWER HOLLAND 0031 6 38 63 90 71 WHATSAPP

Monoblock MBF model SYNCHROFILL Year: 1999 Speed: 3.000 BPH Clockwise direction Monoblock composed of: Rinser 16 clamps with mobile nozzle, single treatment Filler 18 valves with pre-evacuation and injection of nitrogen. Capping 3 heads for natural and plastic straight corks with nitrogen PLC SIEMENS S7 200. Bottles equipments: bordolese, 1Lt, 0.375 Lt

Monobloc FIMER model: SDRT 12.2.16.1S - light vacuum Year: 2004 Speed: 3.000 bph Direction of travel: anticlockwise Rinsing machine with 12 clamps single treatment fixed nozzle Vacuum and injection system before filling 16-valve light vacuum filler Single head straight natural corker Vacuum and injection system before capping Available formats: Bordolese Borgognotta Double Bordolese

TRIBLOCK GAI: Year 1995 Clockwise direction 1) Rinser 12 clamps, single treatment with air breath Manual height adjustment 2) Vacuum station with nitrogen before filler 3) Filler 16 valves with light vacuum in the tank Manual adjustment of the tank height 4) Capper single head for natural straight corks with vacuum before capper Manual height adjustment Safety protections

FLOUR MILL Komo KOMOMIOWe have blue, yellow, red and black in stockThe most important facts at a glance:360 watts, grinds 100 g of fine flour per minute, with coarser settings even several times the amountHopper capacity: approx. 1200 g (wheat)Grinder: corundum/ceramic infinitely adjustableGrinding fineness

KOMO MAGIC FLOUR MILL By the way, the grinder (grinding chamber and grinding stones) of the Magic flour mill is interchangeable. With the interchangeable grinder, which is available as an accessory, you can turn the flour mill into a spice mill.The most important facts at a glance:250 watts, grinds 100 grams of wheat per minute at a coarser setting several times the amountHopper capacity: 850 gGrinder: Corundum/ceramic infinitely adjustableGrinding fineness , solid beech, treated with natural vegetable oils and stainless steel>, hopper and flour spout made of stainless steel>, hopper lid: solid beechVolume at ? Fine?: approx. 70 dbCable length: 1.5 mWeight: 6.6 kgHeight/width/depth: 25 cm/ 16.3 cm/ 20.3 cmStorage height for bowl: 13.8 cmGluten-free ground on requestOn request with 110V motorPerfect for a household size of 1-2 peopleThe high quality of our industrial motors is additionall ...

Engine Make MWM Engine Type TCG 2020 V20 Power KW 2000 KW Power Output 1983 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MJH 630 LA4 Volts 10000 Hz 50 Year of Manufacturing 2018 Total Running Hours 0 brand new, directly available

Engine Make CATERPILLAR Engine Type CG 170-20 Power KW 2062 KW RPM 1500 Fuel Natural Gas Generator Model Marelli MUH 630 LA4 E20 Volts 11000 Hz 50 Year of Manufacturing 2018 Total Running Hours 0 BRAND NEW DIRECTLY AVAILABLE 3 PIECES

2430 KVA Stamford LVSI 814C2 generator for sale 13.800 € without VAT FCA free loaded in our warehouse. Samford LVSi 814C2 alternator 2430 KVA 400 volts RPM: 1500 r/min manufactured: 1996 weight: 6 T The generator end is in a good running condition and was driven by a 1.7 MW Jenbacher J616 natural gas generator.

5.75 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : ca. 5,76 m Shelf offer consisting of: 04 x frame approx. 200 x 60 cm, disassembled. 24 x truss approx. 185 cm. 12 x support base approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 620,00 € Net plus statutory VAT. You will receive an invoice with VAT.

Brand Deutz Model: Gas generator set 1460 kVa Year of construction: 2001 Serial number: 69886750152 Capacity (KvA) 1460 Capacity (Kw) 1168 Engine brand Deutz Engine model TBG620V12 Motor capacity (Kw) 1050 Fuel Natural gas Alternator Brand Stamford Alternator Model HCI734F2-CG Voltage 400 - 231 Frequency (Hz) 50 RPM 1500 Amperes (A) 2107 Dimensions LxWxH (mm) 4700 x 1600 x 2600 Weight (kg) ca 10500 Number of stucco in stock 1 Made in Germany Comments Low hours builded out, no electric panel, no cooler, will be sold in present condition

Compact bridge sawing machine with five CNC controlled axes - sawing / drilling / milling / grinding and polishing with a single machine. A universal machining centre for the processing of natural stone, e.g. granite, marble, travertine and basalt – artificial stone – ceramic slabs CNC control with 15" touch screen and color screen, the five interpolating axes allow for complex machining. Many software tools are included in the scope of delivery, for quick and easy programming (so-called "macros", i.e. pre-programmed editing programs) of – longitudinal and cross-sections – 45° oblique cuts – circular cuts – ellipse cuts – arc cuts – software for drilling – special software for machining kitchen worktops – special software for ceramic processing (tiles + slabs) – special software for engraving work. Remote control console for the control of manual movements, f ...

Brand Deutz Model: Gas generator set 1460 kVa Year of construction: 2001 Serial number: 69886750151 Capacity (KvA) 1460 Capacity (Kw) 1168 Engine brand Deutz Engine model TBG620V12 Motor capacity (Kw) 1050 Fuel Natural gas Alternator Brand Stamford Alternator Model HCI734F2-CG Voltage 400 - 231 Frequency (Hz) 50 RPM 1500 Amperes (A) 2107 Dimensions LxWxH (mm) 4700 x 1600 x 2600 Weight (kg) ca 10500 Number of stucco in stock 1 Made in Germany Comments Low hours builded out, no electric panel, no cooler, will be sold in present condition

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 7 dm3 x 4 hoppers hopper 1 regenerated hopper 2 natural hopper 3 -4 masterbatch/additive with microdosing

Filling monoblock BERTOLASO – 14.000 bph Year: 2002. Speed: 14.000 bph. Direction: Clockwise. Model: ENOICA 72/9 Filler 72 valves. Pre-evacuation. Automatic false bottles. Corker 9 heads – natural straight cork. Vacuum and gas injection Corker BERTOLASO mod. SIGMA 508 – 2008 Cap: 30x60 stelvin Gas injection into the bottle and cap. Safety protections.

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 7 dm3 x 4 hoppers hopper 1 natural hopper 2 regenerated hopper 3 -4 masterbatch/additive with microdosing

Description gravimetric dispenser production: 30 Kg/h hopper capacity: 7 dm3 x 4 hoppers hopper 1 regenerated hopper 2 natural/virgin hopper 3 -4 masterbatch/additive with microdosing

82 MW Rolls Royce Trent 60 - NATURAL GAS COMBINED CYCLE POWER PLANT -Rolls Royce USA, manufactured Trent 60 (SGT-A65) Gas Turbine Generator Set; Manufactured in 2016, delivered in August 2017 65.9 MW(e) ISO 43.8% Gross efficiency / 8,228 kJ/kWh Heat Rate DLE Dry Low Emissions with ≤ 25 ppmvd at 15% O2 on fuel gas Cold start to full power in under 10minutes 50Hz, but easily convertible to 60Hz Engine still preserved in original shipping container An aero derivative gas turbine -Siemens Steam Turbine Generator SST-300 C2S/C160; Manufactured in 2016 Output 15.75MW ISO Speed 7059 RPM Admission Steam Temperature 400 Degrees C Admission Steam Pressure 30 bara Exhaust Pressure 0.07 bara Rotation- Right

Sell a used natural gas / biomethane CHP 500kw, Year of construction 2016 Operating hours: 4500 engine: Liebherr G9512 Generator: Stamford HCI 634 Container: l. 12,20, b. 3,20m, h. 3,30m Control: Motortech Aprovis exhaust gas heat exchanger, GEA intercooler, supply & exhaust air backdrops... + EEG contract 2006 Biomethane very good condition

7.65 M LONG-SPAN RACKS 60CM DEEP, WORKSHOP RACKS, STORAGE RACKS, LARGE SHELVING, HAND STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 7.66 m Shelf offer consisting of: 05 x frame approx. 200 x 60 cm, disassembled. 32 x truss approx. 185 cm. 16 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 815,00 € Net plus statutory VAT. You will receive an invoice with VAT.

9.56 M LONG-SPAN SHELVING 60CM DEEP, WORKSHOP SHELVING, STORAGE SHELVING, LARGE SHELVING, MANUAL STORAGE, SHELVING RACKS, Data: H : approx. 200 cm D : approx. 60 cm L : approx. 9.56 m Shelf offer consisting of: 06 x frame approx. 200 x 60 cm, disassembled. 40 x truss approx. 185 cm. 20 x support shelf approx. 184.5 x 59.5 cm. Incl. locking pins Model : BLT , Type WR20/60 Load: 400 kg shelf load, with evenly distributed load. Levels: 4 x storage levels. Chipboard, natural. Stand blue. New goods from stock. other quantities available! The pre-assembly of the frames can be done by us for a small surcharge of 6€/net per piece. Delivery on request by us is possible at a reasonable price. -- IMMEDIATELY AVAILABLE SEVERAL TIMES-- Price: 1010,00 € Net plus statutory VAT. You will receive an invoice with VAT.