natural gas used for sale

Schräder AWT-BP Exhaust Gas Heat Exchanger Year: 2015 Schräder AWT-BP Exhaust Gas Heat Exchanger with Internal Bypass Type: AWT - BP 20-650 8 S 10 R303 R Year of construction: 2015

Key data: 1067 KW

we are looking for a Jenbacher 3 1067 kw we have a biogas plant

Key data: 5 KW, 5 kVA, 400 V

SenerTec (Badger) CHP HKA-G S1 Electricity and heat generators from 2007, not operational, complete (closed module) 1 available 5.5 KWel, 400 V/50 Hz Manufacturer: SenerTec / Dachs Model: HKA-G S1 Type: Gas CHP Serial Number: 2240777221 Fuel: Propane II Power [KWel]: 5.5 Voltage [V]: 400 Frequency [Hz]: 50 Power [KWth] 12,5 Power [KWges] 21,3 Year of construction: 2007

The heating system includes: - Boiler Buderus Logano GE515- gas boiler 350-400 KW - Gas burner Weishaupot WG40N/1-A ZM-LN, probably built in 2010. - Diaphragm pressure expansion vessel 800 liters, manufacturer Reflex. - Storage water heater 390 litres, Buderus. - Complete control

Key data: 1950 , 2437 , 11000

Cat 3520C Gas gensets Power 1950 Kw / 2437 kVA Frequency: 50 Hz Year: 2007 20 pcs available 55.000 Working hours average

Complete CHP power plant, overhaul is done at 64.000 running hours. - Generator set - Soundproof housing - Heat recovery - Exhaust system - Exhaust cleaning (COditheen) - Silincer - Oil tanks - Control system (Diane xt) - Pumps and pipes In perfect running condition. GAS POWER HOLLAND infogaspowerholland

Gasket kit, Seal Kit CAT PUMPS 31039 for models 3520, 3521, 3527 34-piece New ! Dimensions (packaging): 270 x 130 x 45 mm

Complete Genset, 0 hours after M6 maintenace, damaged crancksahft. (new bearings, liners, renewed turbochargers, renewed cylinder head, new main, pilot gas valves. Lot of spare parts available.

Cutting size 6mt x 2mt Hiperterm HD 30/70 generator Thickness from 1mm to 15mm stainless steel up to 12mm New control updated in 2020 with € 15,000 of expenditure

Plasma cutting table Brand: SAF / Airliquide / Oerlikon Model: Plasmatome 20 Useful cutting capacity: 2000x6mm It has rails to expand the cutting length from 6000mm to 8000mm AZURMATIC Aspiration Table of 2000x6000mm (2 modules of 2000x3000mm) CNC: BURNY 3.5 DIGISAF Complete CNC manual available. Includes computer with the Lantek CadCam and the license backpack. Plasma generator: - Brand: Nertajet - Model: HP120 - Torch: OCP 150 - Cutting capacity:  Carbon Steel: 15mm  Stainless Steel: 15mm  Aluminum: 20mm Equipment description: - It has height control - Double motorization in the portico - Movement speed: 10m / min

Cutting table / Plasma cutting gantry Brand: SATO Model: SATRONIK HD 8000 Year 2002 Number of heads: 2 - 1 Kjellberg FineFocus 800 cutting head - 1 Kjellberg FineMaker marking head with PB-M25 W torch Maximum wide cutting capacity: 6,000mm Maximum length wide cut: 24,000mm Controller: SATOCNC 3000 Cutting equipment information: Brand: Kjellberg Model: FineFocus 800 Maximum cutting capacity: 80mm Cutting quality up to: 60mm Maximum drilling capacity: 40mm Maximum current at 100%: 300A Automatic gas console

Wartsila 34 SG V18 charge air cooler, intercooler, combustion air cooler. Overhauled cleaned, pressurtested for sale. Excellent condition.

Gas Flare Brand: C-Deg Model: LTC 1,7 VE Year: 2020 Fuel: Biogas Additional info: DN 80 normal volume: 300m2/h max combustion power: 1,7MW Gas composition: CH4 : 55 Vol.-% (min 40 to max 60), CO2: 45 Vol.-% (min 55 to max 40), H2S max 1000pm .

CVP A200 bulk gas flush machine Power: 3 Phase

Suprarex 3500 (width 3500mm) with plasma M3 of the second generation (G2) and with WIC (water clearance for the possibility of cutting under water). The machine was bought mainly for cutting stainless steel. Of course, it can also cut carbon steel or aluminum (it can only be cut separately). Basic consumable parts for the burner are also included. The machine was practically never used and cut for a total of 1 hour (started up and tested).

Year of Manufacture: 2015 Location: Czech Republic Description: Machine in good technical condition, possibility of testing after agreement. Technical parameters: cutting range - steel 12mm, Al 6mm gas - O2, N2, air laser power - 2kW max. sheet size - 1500 x 3000mm ejection of material and blanks - manually, 1 table online monitoring of cutting Wrykrys software for creating firing plans . Accessories: compressor and filter. unit.

The machine is in good technical condition, it is possible to test it by agreement. Type P 2000 adapted to a removable grate and waste tub. The original machine had an inadequate water bath. The removal of flue gas is therefore via additional extraction. A simple and functional machine for locksmiths. The machine including the Alfa In Pegas 101 CNC aggregate, the control PC (where there is a sheetcam program for creating tool paths), a set of consumables for the machine torch. The PC has a monitor, keyboard and mouse. Tables for burning different material thicknesses have been tested on the PC. It is possible to burn steel, aluminum and stainless steel from a thickness of 0.5-20 mm. Working area: 1000x2000mm Active wasps Z Control software: Mach3 X/Y/Z guide: HIWIN HGR20 Drive: Nema23 stepper motors - 2.8Nm Maximum speed: 12000mm/min Construction: Solid welded Dimensions: 1600x2400x1000m ...

The machine is in good technical condition, after agreement the possibility of testing. ALFATEC CNC compact plasma 2m x 1 m, PEGAS 100 PLASMA CNC, Torch S 125 10m PEGAS 100 Plasma machine, WRYKRYS - technological program. Dimensions: length 270 cm, width 200 cm, table height 80 cm, height including control panel 170 cm, weight 940 kg.

Machine Type: Electrode Inverter Welding Rectifier Brand: Merkle Type LiteARC 160 Connection voltage 1 x 230 Volt Serial No. 127.931 Adjustment range 15 – 160 amps Duty cycle 25% ED at 150 amps 60% ED at 90 amps 100% ED at 80 amps Infinitely variable current adjustment max. weldable material thickness 4 mm Cooling inverter by built-in fan Design of portable assembly system Fuse protection 16 amps Dimensions L x W x H 360 x 150 x 240 mm Weight 6 kg Age 3 years Optional Accessories Carrying Strap Condition workshop-tested, like new, incl. UVV test report Scope of delivery welding system with the following accessories: 1 piece of ground cable 1 piece of electrode cable 1 piece of slag hammer, heavy-duty version 1 piece steel wire brush, 2 rows 1 piece mains plug 230 V, solid rubber 20 rod electrodes in 2.0 x 250 mm  ...

BIO GAS GENERATOR BRAND : GE JENBACHER MODEL : 620 YEAR : 2009 CONDITION: IN EXCELLENT CONDITION ONLY 500 HOURS OF OPERATION 1500 KW

serial number: 0493373 ampere: 420 A water cooling unit: kW total power requirement: kW The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: Firesafe Shaft seal: graphite New ! Dimensions (packaging): 120 x 120 x 20 mm

weight max. in kg: 6000 kg fork length: 1900 mm : 89% serial number: GEF 2240 height of stroke: 3300 mm weight of the machine ca.: 9650 t The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.

gasket kit damper / KPL XOMOX CRANE 080/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 80 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! Dimensions (packaging): 120 x 120 x 20 mm

gasket kit damper / KPL XOMOX CRANE 100/16 ISO - 81 for high-performance butterfly valve 800ISO Nominal diameter: DN 100 pressure rating: PN 16 seat material: Firesafe shaft seal: graphite New ! Dimensions (packaging): 160 x 145 x 20 mm

gasket kit damper / KPL XOMOX CRANE 150/16 ISO - 00 for high-performance butterfly valve 800ISO Nominal diameter: DN 150 pressure rating: PN 16 seat material: PTFE shaft seal: PTFE New ! dimensions (packaging): 200 x 200 x 20 mm

For sale is a Stamford PE 734 F2 generator with serial number A07E797662. This generator was coupled to a Jenbacher 612 engine with the design number D851. The generator delivers an output of 2080 kVA at a frequency of 50 Hz and a voltage of 400/231 V. It was manufactured in 2007 and has since clocked up 30,000 hours of operation. Please note that the 30,000-hour service has not yet been performed. Please do not hesitate to contact us for more information or to arrange a viewing.

We are pleased to offer for sale a Stamford HVSI 804 S2 generator bearing serial number 0855537/01. This model was originally paired with a Jenbacher 616 engine with the design number G311. The generator is characterized by its high power of 2515 kVA, which is generated at an output voltage of 11,000 V. This model has already completed 64,000 hours of operation. An important aspect to keep in mind is that the bearings of this generator have been changed every 20,000 hours of operation. The price of this generator is 12,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.

For sale is a Stamford LVSI 804 W2 generator, which bears the serial number 0854702/01. This model was originally paired with a Jenbacher 616 engine with the design number B503. The generator has a power of 3555 kVA, which is generated at an output voltage of 690 V. The price of this generator is 15,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.

For sale is a Stamford LVSI 804 S2 generator with serial number 0853928/01. This model was originally paired with a Jenbacher 616 engine with the design number B783. The generator delivers an output of 2790 kVA at an output voltage of 400 V. It has already completed 40,000 operating hours. We would also have the associated engine in stock. The price of this generator is 16,500 euros. For more information or to arrange a viewing, please do not hesitate to contact us.

For sale is a Stamford LVSI 804 W2 generator, with the serial number 0854818/01. This model was originally paired with a Jenbacher 616 engine with the design number E844. The generator delivers an impressive output of 3555 kVA at an output voltage of 690 V. This model, which was manufactured in 2008, has only completed 15,000 operating hours. The price of this generator is 30,000 euros. For more information or to arrange a viewing, please do not hesitate to contact us.

For sale is a Stamford LVSI 804 W2 generator with the serial number 0854896/01. This generator was coupled to a Jenbacher 616 engine with the design number E844. The generator delivers an output of 3555 kVA at an output voltage of 690 V. It was manufactured in 2008 and has since clocked up 15,000 hours of operation. Please note that this generator has been overhauled and has no operating hours since the overhaul. The price of this powerful generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a LEROY-SOMER LSA L95/4P generator with the serial number 607788/1. This generator was coupled with a Jenbacher 620 engine with the design number U320. The generator delivers an output of 2530 kVA at an output voltage of 400 V. It was manufactured in 2016 and has only 500 hours of operation since then. The price of this powerful and hardly used generator is 30,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a LEROY-SOMER LSA 54 XL 95-4P generator with serial number 169463-1. This generator was coupled to a Jenbacher 620 engine with the design number B056. The generator delivers an output of 3391 kVA at an output voltage of 10,500 V. It was manufactured in 2003. The price of this powerful and unused generator is 20,000 euros. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a Stamford HCI 734 F2 generator with serial number 96404594. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a Stamford HCI 734 F2 generator with serial number 96415300. This generator was coupled to a Jenbacher 320 engine with the design number 5727. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 1996. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a Stamford HCI 734 FCG generator with the serial number A03C027807. This generator was coupled to a Jenbacher 320 engine with the design number B212. The generator delivers an output of 1460 kVA at an output voltage of 400/231 V. It was manufactured in 2003. An important aspect to keep in mind is that a Megger test has been done on this generator. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a Stamford LVSI 804 S2 generator with serial number 0853928/01. This generator was coupled to a Jenbacher 612 engine with the design number D965. The generator delivers an output of 2700 kVA at an output voltage of 400 V. It was manufactured in 2007 and has since clocked up 64,000 hours of operation. Please do not hesitate to contact us for more information or to arrange a viewing.

For sale is a LEROY-SOMER 54 XL10/4P generator with serial number 600428-6. This generator was coupled with a Jenbacher 620 engine with the design number B321. The generator provides an output voltage of 11,000 V. It was manufactured in 2003 and has since clocked up 82,346 hours. Please do not hesitate to contact us for more information or to arrange a viewing.

GE Model : LM6000PA Power Output : 42 MWe ISO condition Voltage : 11KV Frequency : 50Hz

Key data: 635 , 400

Jenbacher 312 Complete Biogas Unit for Sale. Condition: New from cancelled project. Make and Model: JENBACHER 312 Fuel: Biogas Year: 2023 Hours: 0 Capacity: 635kW HZ: 50 Voltage: 400 V Scope of supply: Complete generator set including Engine, Alternator, Control panel (DIA.NE XT4), Base frame, Gas line. Price: Please Apply

Achievement: 260A at 60% 100A at 100% Equipped with: - Separate feed box - Air-cooled burners -Protective Country of origin: Netherlands Machine LxWxH: 120 x 45 x 105 cm

Key data: 50 KW, 1500 1/min

MAN gas engine with ignition used

Jenbacher gas generator ( UNUSED ) , Model : J620GS-F75 Power Output : 3431 KWm / 4767 KVA Voltage : 10500V Frequency : 50 Hz Qty : 8 sets Unused gas generator, only installed and tested.

This industrial plant was built in 2007 as a pilot project and is only used temporarily. The complete package includes numerous pumps, pneumatic and manual gate valves of various sizes, as well as ball check valves, flow meters as well as the entire pipeline construction and a control cabinet. Preferably, this system is sold as a package including self-dismantling. Details on request.

From insolvency: ESS Synmag 4000 Year of construction 2007 with feed case DVK 5000 with 5meter intermediate package 4 Roller drive Water cooling 2/4 stroke Welding range 40-400Ampere Duty cycle at 100% 240Ampere at 60% 300Ampere with 4meter burner, ground cable --without pressure reducer--

Migatronic Flex MPS 330S Year of construction 2003 330 Amps 380 volts Pulse Synergistic 2/4 time 4 rollers drive suitable for aluminium, stainless steel and steel gas-cooled --without gas cylinder-- --Sales on behalf of customers--

From operating resolution: MIgatronic PI 250 DC Year of construction 2014 Pulse function HF Ignition Water cooling without function Welding Range: 5-250Amp 250Amps at 30% ED 180A at 60% 150A at 100% 220 volts with 8meter burner (sheathing partially damaged), ground cable and pressure reducer Dimensions in mm approx. 1100x630x720 --Very neat device-

From operating resolution: ESS Squarearc 356 C Year of construction 2011 AC/DC Welding range 5-350 amps Pulse function HF Ignition Water cooling 350Amps at 60% ED complete, with 6meter burner, ground cable and pressure reducer Dimensions in mm approx. 980x450x930 --Very neat device-

From the stock of authorities: Pulse system little used Elmatech Hybrid 4002 Year of construction 2005 Welding capacity 400Ampere at 60% ED 320Amps at 100% Water cooling 4-Roll Wire Feeder Wire feeder case DV 39 with 5meter intermediate hose package 4meter burner with regulator Wire rolls 1.0-1.2mm + rolls for aluminum wire Dimensions in mm without case 1000x450x930 with operating instructions, pressure reducer and ground cable