136,418 used machines on RESALE, but how to find them? Machine Search
4-cylinder diesel engine for industrial applications and use as a drive or replacement engine. Compact, robust design with direct injection and liquid cooling. The TNV series is considered a proven standard drive and is widely used in numerous construction machines. Typical applications include mini excavators, wheel loaders, telehandlers and sweepers, as well as generator sets, compressors and pumps. Technical data according to the nameplate: Yanmar Power Technology Co., Ltd. Made in Japan Exhaust gas marking: EM-EXP Conformity Notice: EU Regulation 2016/1628 Other technical data: Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: approx. 88 x 90 mm Injection: Direct injection Charging: Naturally aspirated engine Cooling: Liquid cooling Max. rated speed: approx. 2,500 1/min Power depending on tuning: approx. 29 to 36 kW Oil content: approx. 7 l Flywheel housi ...
4-cylinder diesel engine of the KDI series in apparently new or unused version. Compact, powerful industrial engine with common-rail direct injection, turbocharging and advanced exhaust gas aftertreatment. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical areas of application are wheel loaders, excavators, telehandlers, sweepers as well as power generators, compressors and pumps. Technical data: Engine Family ID: SKHXL02.5TCR Fuel: Diesel / Ultra Low Sulfur Fuel Type: 4-cylinder in-line engine, 4-stroke Displacement: 2,482 cc / 2,482 l Bore x stroke: approx. 88 x 102 mm Valves: 4 per cylinder Valve timing: gear-driven camshaft Power category according to the nameplate: 37-56 kW Max. rated speed: approx. 2,600 1/min Max. torque: approx. 300 Nm Charging: Turbocharger In ...
4-cylinder diesel engine of the KDI series in version D23A. Compact, powerful industrial engine with common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and sweepers as well as generator sets, compressors and pumps. Technical data: Power: 55.4 kW at 2,300 rpm Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 88 x 102 mm Displacement: 2,482 cm³ Valves: 4 per cylinder Max. torque: approx. 300 Nm at 1,500 rpm Injection system: Common rail direct injection Max. injection pressure: approx. 2,000 bar Charging: Wastegate Turbocharger Intercooling: available Cooling: Liquid cooling Valve train: camshaft in the crankcase, gear drive Pushrods and roc ...
4-cylinder diesel engine of the 904 series in the ES5/T4F LK version. Compact industrial engine with high power density, common rail injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and tractors, as well as generator sets, compressors and pumps. Technical data of the series: Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 98 x 120 mm Displacement: approx. 3.6 l Power range according to the designation: 74 to 100 kW Max. power: approx. 100 kW / 134 hp Max. torque: approx. 530 to 550 Nm at 1,500 rpm Injection system: Common rail direct injection Charging: Turbocharger with intercooling Cooling: Liquid cooling Engine management: electronic Data interface: CANb ...
Key data: 2000 KW, 750 1/min
Make: MaK Four-stroke marine main diesel engine, to drive a propeller (2 CPP-rudder propeller) Model: 6M25C Built year: 2015 Condition: New / Unused Rated Output: 2000 kW at 750 rpm Design: 6 cylinders in line, IMO II 2 counter-clockwise rotation non-reversible. Compressed - air starting suitable for operation with gas oil max viscosity: 7 cST/40 c
Motor dimensions 880x640x740 mm Auction-ID: A1-50849-295
4-cylinder diesel engine of the KDI series in version D23A. Compact, powerful industrial engine with common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and sweepers as well as generator sets, compressors and pumps. Technical data: Power: 55.4 kW at 2,300 rpm Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 88 x 102 mm Displacement: 2,482 cm³ Valves: 4 per cylinder Max. torque: approx. 300 Nm at 1,500 rpm Injection system: Common rail direct injection Max. injection pressure: approx. 2,000 bar Charging: Wastegate Turbocharger Intercooling: available Cooling: Liquid cooling Valve train: camshaft in the crankcase, gear drive Pushrods and roc ...
4-cylinder diesel engine of the KDI series in version D23A. Compact, powerful industrial engine with common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and sweepers as well as generator sets, compressors and pumps. Technical data: Power: 55.4 kW at 2,300 rpm Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 88 x 102 mm Displacement: 2,482 cm³ Valves: 4 per cylinder Max. torque: approx. 300 Nm at 1,500 rpm Injection system: Common rail direct injection Max. injection pressure: approx. 2,000 bar Charging: Wastegate Turbocharger Intercooling: available Cooling: Liquid cooling Valve train: camshaft in the crankcase, gear drive Pushrods and roc ...
4-cylinder diesel engine of the KDI series in the NA V-Belt LRC version. Compact, powerful industrial engine with common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and sweepers as well as generator sets, compressors and pumps. Technical data of the series: Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 88 x 102 mm Displacement: 2,482 cm³ Valves: 4 per cylinder Power: approx. 55.4 kW / 74.3 hp at 2,600 rpm Max. torque: approx. 300 Nm at 1,500 rpm Injection system: Common rail direct injection Max. injection pressure: approx. 2,000 bar Charging: Wastegate Turbocharger Intercooling: available Cooling: Liquid cooling Power take-off: V-belt ...
4-cylinder diesel engine of the TCD series in apparently new or unused version. Robust industrial motor with high power density and compact external dimensions. Common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical areas of application are wheel loaders, excavators, telehandlers, sweepers as well as power generators, compressors and pumps. Technical data according to the nameplate: Code: C3CI100 Displacement: 3,621 l Power: 100.0 kW / 134 HP Rated speed: 2,300 1/min Spec: 25017141 CSpec: 1000478936 Permits: E1 96R 020091, E1 120R 020203 Made in Germany Marking: EM-EXP, for export only Exempt from U.S. emissions regulations under 40CFR1068.230 Not intended for use in EU Non-Road Mobile Machinery Other technical ...
Key data: 919 KW, 1800 1/min
This marine propulsion engine is rotating, removed due to re-motorization and has 15,580 turning hours turned after complete overhaul
4-cylinder diesel engine of the KDI series in version D23A. Compact, powerful industrial engine with common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and sweepers as well as generator sets, compressors and pumps. Technical data: Power: 55.4 kW at 2,300 rpm Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 88 x 102 mm Displacement: 2,482 cm³ Valves: 4 per cylinder Max. torque: approx. 300 Nm at 1,500 rpm Injection system: Common rail direct injection Max. injection pressure: approx. 2,000 bar Charging: Wastegate Turbocharger Intercooling: available Cooling: Liquid cooling Valve train: camshaft in the crankcase, gear drive Pushrods and roc ...
Key data: 750 KW, 1500 1/min
MWM Engine TBD602-V16 Diesel engine from 1980, 1 available 750 KW x 1,500 rpm Manufacturer: MWM Model No.: TBD602-V16 Type: Diesel Engine Serial Number: 80 79 53 Power [KW]: 750 Year of Make: 1980 Operating hours: unknown Total weight [kg]: 10,000
Workspace Center width 1000 mm Turning diameter over bed 356 mm Circulating Ø over support 220 mm Bed width 206 mm Travel X-axis travel 178 mm Travel Z1 axis 92 mm Bsncqtycvju Swivel range upper slide ± 50° Main spindle Speed range, High 550 1/min - 3000 1/min Speed range, Low 30 1/min - 550 1/min Spindle mount Camlock D1-4 Spindle bore 38 mm Spindle Taper 5 MK Feed Feed X-axis 0.014 mm/rev - 0.206 mm/rev Feed Z-axis 0.043 mm/rev - 0.653 mm/rev Tapping Tapping, Metric (37) 0.4-7 mm Tapping Whitworth (28) 4-56 TPI Tailstock Tailstock quill diameter 45 mm Tailstock cone 3 MK Tailstock quill stroke 120 mm Tailstock transverse adjustment ± 10 mm Drive power Motor power main drive 4 kW Dimensions and weights Dimensions (length x width x height) 1.95 m x 0.75 m x 1.55 m Weight 880 kg
4-cylinder diesel engine of the KDI series in version D23A. Compact, powerful industrial engine with common rail direct injection, turbocharging and intercooling. Suitable as a drive or replacement motor for construction, municipal, agricultural and industrial machinery as well as other mobile applications. Typical applications include wheel loaders, excavators, telehandlers and sweepers as well as generator sets, compressors and pumps. Technical data: Power: 55.4 kW at 2,300 rpm Type: 4-cylinder in-line engine, 4-stroke Bore x stroke: 88 x 102 mm Displacement: 2,482 cm³ Valves: 4 per cylinder Max. torque: approx. 300 Nm at 1,500 rpm Injection system: Common rail direct injection Max. injection pressure: approx. 2,000 bar Charging: Wastegate Turbocharger Intercooling: available Cooling: Liquid cooling Valve train: camshaft in the crankcase, gear drive Pushrods and roc ...
Key data: 243 KW, 2200 1/min
We offer completely overhauled Scania DC/DI12-54/56A industrial engines in exchange. These engines have been certified by the Scania Service Partner overhauled with test bench certificate.We sell all engines in exchange.We sell for a surcharge even without returning old parts from the factory zeven/Germany. If you have any questions, please contact: MIW GmbH Engine Repair Plant Nord-West-Ring 8 27404 Zeven Geramny Phone:0049(0) 4281-950583 Mail: infoatmiw-zeven.de
Tip height: 265 mm Center width: 1500 mm Circumferential Ø: over bed 540 mm Spindle bore: 65 mm Spindle mount: size 8 Pick-up cone tailstock: 5 MK Spindle speeds: 9 - 1800 rpm Feeds: longitudinal/flat 0.063-2.24/0.032-1.12 mm/rev Thread pitches: 0.35 - 560 mm Electrical connection: 380 V, 11 kW Space requirement: 4580 x 1250 x 1330 mm Weight: 3200 kg
Tip height: 250 mm Center width: 1500 mm Circumferential Ø: over bed 500 mm Spindle bore: 56 mm Spindle mount: size 8 Pick-up cone tailstock: 6 MK Spindle speeds: 11.2 - 1400 rpm Feeds: longitudinal/flat 0.027-3.8/0.013-1.9 mm/rev Thread pitches: 0.5 - 36 mm Electrical connection: 380 V, 2 x 5.5 kW Space requirement: 3600 x 1250 x 1300/1600 mm Weight: 3000 kg
Key data: 400 mm, 800 mm
For sale TOS lahe SU80/8000 y.m. 1963/2008 Diameter above the bed: 800 mm Circulating diameter above the slide: 495 mm Distance between centers: 8000 mm Machine dimensions (wxd): 1845x11175 mm Machine cca weight: 10000 kg The lathe has a lot steady rest and DRO ESSA
Offer 24178 Specifications: - Center height 250 mm - Center width 2000 mm - larger circulation – Ø over bed 490 mm - via flat sleds approx. 300 mm - Spindle bore 72 mm - Pick-up cone of the tailstock quill MK 5 - Travel of the tailstock quill 260 mm - Spindle speeds 25 - 1160 rpm -Feeds - Travel of the cross slide 200 mm - Travel of the upper slide 115 mm - Drive 380 V / 5.5 kW - with: - Tailstock, 3-jaw lining, bezel - Steel holder, moving center punch, - Chip tray - Space requirement approx. W 3500 x H 1500 x D 1300 mm - Weight approx. 3000 kg
Key data: 7 KW, 1500 1/min
used, comes from a fully functional plant Model: aiI 12/7000 Type: A06B-1408-B103 Year of manufacture: 03/2006 S1 11 kW / 1500 - 6000 rpm / max. 54 A 7.5 kW / 7000 rpm S2 30min S3 60 15 kW / 1500 - 6000 rpm / max. 64 A 11 kW / 7000 rpm Space requirement LxWxH: 620 x 350 x 300 m
Specifications: Year of construction approx. 1988 Center height 120 mm Center width 430 mm Speed: 60 - 3000 rpm in 18 gear stages Spindle Passage 23 mm Short taper spindle head DIN 55027 Tailstock MK 2 Feeds from 0.03 to 0.15 mm /rev Possible Threads Metric, Inch, Module and Diametrical Pitch Metric thread pitches from 0.25 to 2.5 mm Length 1.2 m, height 1.3 m, depth 0.65 m
Key data: 95 KW, 1500 1/min
DEUTZ BF6M-1013 Engine, 7.2 L Diesel, 95 KW, 1500 rpm engine, 6 cylinder diesel, German Machine, Year 2003 - Engine was built into generator. Since the generator is defective the engine is sold. Engine runs very well, - Video available
Motor Control, Servo Control GOULD, GETTYS N360 N360-10041 Spare part for Toyoda HES52 ! used ! Dimensions: 240 x 130 x 265 mm
maximum number of results exceeded
please refine your search
1.400 € 
