136,830 used machines on RESALE, but how to find them? Machine Search
Please try with a different search term.
On offer is a used, functional 40-foot refrigerated container from the manufacturer NARU. Technical data Manufacturer: NARU Model No.: 45R1 Type: IAAA-S-010 Year of Make: 2008 Dimensions: length 12.3 meters, width 2.44 meters, height 2.90 meters Volume: 67.36 m3 The container is currently at our customer's site near Magdeburg and is being sold due to restructuring. Only the offered assets are expressly sold, any items that can be seen in the photos are expressly not part of the scope of the offer. We sell the assets on behalf of our customers. The offer prices are net prices in EURO ex works. Likewise, any professional dismantling and loading of the asset would be the responsibility of the buyer. Since these are used assets, we sell them without guarantee or warranty as well as the right to take them back. The buyer must also dismantle the assets professionally. ...
Code: 0177 Brand: NARDELLO - ITALY Model: SOTOS - CE Standard Cross cutting panel saw for postforming tops, edged and non-edged panels. Suitable for companies producing furniture, kitchens, bathroom furniture, furnishings, panels, and various - CE Standard Blade carriage unit: The blade carriage slides on linear guides with spheres blow-by and it is controlled by a brushless motor. Scoring unit group, whih is controlled by a brushless motor, allows to cut postformed edges and also special workings, which increase productivity of the machine. Pliers group and/or rear positioner are controlled by brushless motor and slide on linear guides with spheres blow-by. Cycles check-out is made by Numerical Control. Technical characteristics: Cutting width 1500 mm Cutting height 100 mm Main blade motor 7,5 Hp (5,5 Kw) Rotating speed 4000 Main blade diameter 300-400 mm Scorin ...
Face and boring head NAREX Vhu 80 ( Vhu80 ) holder: SK50 in wooden case used, tested ! Dimensions: 420 x 410 x 155 mm
Magnetic plate, clamping plate, permanent magnet, magnetic chuck, magnetic chucking plate, permanent magnetic lathe chuck -Manufacturer: narex, magnetic clamping plate, permanent magnet chuck with chuck flange -Type: PERMAG K 250 -Clamping surface: Ø 250 mm -Recording dimensions: see photos -Dimensions: Ø 275 x 115 mm Total weight: 30 kg
Electrical magnet size 1000 x 300m 110 volt supply IP 66
New lathe. Distance between centers: 800mm. Swing: 350mm. Swing over carriage: 200mm. Spindle hole: 46mm. Speeds: 18. (31,5-2500rpm). Power: 4hp. Dimensions: 2050x1000mm. Weight: 1100Kgs. Equipped with chuck and steady rest.
New lathe. Distance between centers: 2200mm. Swing: 500mm. Swing over carriage: 330mm. Swing in gap: 690mm. Spindle hole: 52mm. Speeds: 18. (25-2000rpm). Dimensions: 3700x1000mm. Weight: 1750Kgs. Equipped with chuck and steady rest.
New lathe. Distance between centers: 1000mm. Swing: 500mm. Swing over carriage: 305mm. Spindle hole: 80mm. Speeds: 18. (19-1500rpm). Weight: 1680Kgs. Equipped with chuck and steady rest.
turning diameter: 430 mm turning length: 1500 mm swing diameter over bed slide: mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 350 mm turning diameter over slide rest: 310 mm turning length: 700 mm total power requirement: 4,6 kW weight of the machine ca.: 1,0 t Dimensions (HxWxD): 2.200 x 1.300 x 1.175 mm --> Technical data Centre height: 175 mm --> Centre width: 800 mm --> Swing diameter over bed: 350 mm --> Swing diameter over support: 310 mm --> Gap length in front of the faceplate: 145 mm --> Cross slide travel: 205 mm --> Top slide travel: 100 mm --> Tool cross-section: 20x20 mm --> Bed Width: 220 mm --> Height: 300 mm --> Headstock Spindle bore: 46 mm --> Spindle nose: DIN 55027-5 --> Spindle inner taper: 1:20 --> Tool holder: MK-3 --> Spindle speeds: 18 --> Speed range: 25 - 2000 rpm --> Tailstock Quill diameter: 50 mm --> Quill inner taper: MK-3 --> Quill travel: 140 mm --> Lateral adjustment: 10 mm --> Feed range Number of feeds: 256 --> Longitudinal feeds (128): 0.042 - ...
Specifications: - Center height 220 mm - Turning diameter over bed 440 mm - Center height over bridge 330 mm - Turning diameter in the offset 630 mm - Center height / turning diameter via support 135 / 270 mm - Center width 1000 mm - Spindle bore 52 mm - Mounting cone of the tailstock quill MK 4 - Travel of the tailstock quill 310 mm - 18 spindle speeds 25 - 2000 rpm - Feeds longitudinal + flat - Metric Threads / Withworth Threads / Module Threads / DP Threads - Drive 400 V / 6 kW - 4-jaw chuck with interchangeable jaws and center punch, new Multifix size B with 3 inserts
Tip height: 175 mm Center width: 800 mm Circumferential diameter over bed: 350 mm Circumferential diameter over support: 310 mm Spindle bore: 46 mm Speed range: 25 - 2000 rpm With digital display
Magnetic plate, clamping plate, permanent magnet, magnetic clamping plate, magnetic clamping plate, permanent magnetic lathe chuck, magnetic round chuck -Magnetic clamping plate: permanent magnetic lathe chuck with chuck flange -Recording: MK4 -Clamping surface: Ø 160 mm -Dimensions: Ø 160 x 205 mm -Weight: 9.8 kg
greates pass round over bed: 350 mm swing diameter over face slide: 200 mm centre distance: 800 mm centre height: 175 mm turning length: 700 mm 3-jaw chuck: Röhm Ø 160 spindle bore: 46 mm spindle head: Gr. 5, DIN55027 number of spindle speeds: 18 spindle turning speed range: 31,5-2500 U/min tailstock quill taper MT: 3 weight of the machine ca.: 1000 kg 3-axis digital readout manual included The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
turning diameter over bed: 340 mm turning diameter over slide rest: 260 mm turning length: 700 mm spindle bore: 48 mm spindle turning speed range: 25 - 2000 U/min spindle nose: DIN 55027 KK 5 voltage: 380 Volt total power requirement: 2,2/4,4 kW weight of the machine ca.: 1000 kg. dimensions of the machine ca.: 1.800 x 700 x 1.500 mm The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Complete line for twist off caps manufacturing. Air compressor included. Press, scissors, oven, PVC stabilizer, front and side vew cap forming machines
ungheinrich EFX125 Narrow Aisle Forklift | 1,250 kg | 48V | 5 m lifting height | Duplex | Used For sale is a narrow-aisle forklift from the manufacturer Jungheinrich, model EFX125 SX120/500ZT-SF. The device comes from a site closure of a freight forwarder and has been regularly maintained. Technical data: • Manufacturer: Jungheinrich • Model: EFX125 SX120/500ZT-SF • Year of manufacture: approx. 2005 – 2012 (series produced during this period) • Operating voltage: 48 V • Battery: 660 Ah • Nominal load capacity: 1,250 kg • Lifting height: approx. 5,000 mm (duplex mast) • Battery weight: approx. 800 – 1,200 kg (typical for this device class) • Hours: 4776.6 Dimensions: • Width: approx. 170 cm (incl. wheels) • Length: approx. 310 cm • Height (mast retracted): approx. 312.5 cm Condition: • Used, good condition • Fully functional • N ...
Nardeux SMIX E 749 – Radio Decontaminameter Manufacturer: Nardeux Model: SMIX E 749 Item No.: 077 Condition: good working condition, functionally tested Auction-ID: A1-51275-63
1 BREITENBACH type Benjamin 3, 5-D high-performance continuous dyeing and finishing machine for elastic and rigid narrow fabrics (and bands, ribbons or tapes) made of polyamide, cotton or viscose year 1999 composed of: foulard dyeing padder roller width 300 mm with electrically heated vat, steamer capacity 34 m, 5 washing boxes each with squeezing padder and indirect steam heating, chemical finishing padder, hot air dryer capacity 50 m gas heated, exit for 4 tapes
Vintage: 2018 Appellation: Francs Côtes de Bordeaux Region: Bordeaux Quantity: 6 bottles Capacity: 1.5 L (magnum) Classification: Magnum 1.5 L - Côtes de Francs 2018 - Chateau Guillon Nardou - Bordeaux Packaging: case of origin Auction-ID: A1-51167-517
Vintage: 2016 Appellation: Francs Côtes de Bordeaux Region: Bordeaux Quantity: 72 bottles Capacity: 75 cl Classification: Côtes de Francs 2016 - Chateau Guillon Nardou - Bordeaux Packaging: case of origin Auction-ID: A1-51167-516
Vintage: 2018 Appellation: Francs Côtes de Bordeaux Region: Bordeaux Quantity: 12 bottles Capacity: 1.5 L (magnum) Classification: Magnum 1.5 L - Côtes de Francs 2018 - Chateau Guillon Nardou - Bordeaux Packaging: case of origin Auction-ID: A1-51167-518
Vintage: 2016 Appellation: Francs Côtes de Bordeaux Region: Bordeaux Quantity: 36 bottles Capacity: 75 cl Classification: Côtes de Francs 2016 - Chateau Guillon Nardou - Bordeaux Packaging: case of origin Auction-ID: A1-51167-514
Material: mild steel Reel in stainless steel;
Unused set of 2 tires on rim. Auction-ID: A3-46111-17534
THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-147
The PC-100 allows you to pull different types of pipettes with all these settings for output voltage, one-step and two-step draw mode, and draw THE LIST OF LOTS IS NOT DEFINITIVE, IMPORTANT LOTS WILL BE ADDED LATER, PLEASE CHECK THE ADDED LOTS. The sale includes only what appears in the photos. The buyer, by purchasing the equipment, agrees that the device must be used according to the standards and legislation in force in his country. The seller will not be held responsible in any way for misuse that does not comply with the safety conditions and the standards and legislation in force Auction-ID: A1-51527-202
CLIMAVENETA BRAT2 0021M-NARV Brand:CLIMAVENETA Type:BRAT2 0021M-NARV Stock number:M23-4627 Cooling capacity:5.74 kW Application:Cooling Number of fans:2 Refrigerant:R410A Refrigerant Content:1,57 kg Voltage:220 Volts Power consumption:3,1 kW Dimensions:900 x 370 x 640 mm Weight:100 kg Year: New/unused Number in stock:2 piece(s) Price:Quotation request Description: New unused air-cooled Climaveneta water chiller with a scroll compressor, without pump. Mentioned capacity at a water temperature of +12/7°C and an ambient temperature of +35°C. Visit our website: used-refrigeration
Key data: 12 mm
Stohm 125 NAR, # 10594, without rod feed pipe
BOSCHERT GIZELIS G-CUT 3013 CNC hydraulic guillotine shears were built in 2021 in Greece by BOSCHERT GIZELIS.CO. The machine is used for precision cutting of sheet metal made of, among others, ST42 steel and stainless steel with a maximum thickness of 13 mm. It is also possible to cut thicker materials if these have a lower tensile strength. The machining process is performed by means of precise, hardened cutting knives with automatic adjustment of the gap between blades. The positioning of the material is facilitated by a work table with integrated balls on which the workpiece goes directly under the cutting line. Along the cutting line, in turn, hydraulic material hold-downs are used to ensure that the sheet is held firmly in place during machining. The G-CUT 3013 is offered with a number of state-of-the-art systems that expand the machining possibilities and make daily work easi ...
For sale is a modern narrow-aisle forklift/system forklift with a elevating cab, which has been specially designed for the storage and retrieval of loads as well as picking in very narrow storage aisles. The device is in very good condition and is ideal for high-bay warehouses with high handling capacity. Technical data Type: Order picking stacker for high-bay warehouses Guide system: Rails Year of manufacture: 2023 Serial Number: 6973125 Condition: used / as good as new Nominal load capacity: 1,500 kg Load center of gravity: 600 mm Lifting height: 9,050 mm Platform lifting height: 8,600 mm Mast Type: Triplex Overall height (mast retracted): 4,460 mm Mast height (extended): 11,040 mm Overall length (head retracted): 3,846 mm Vehicle width: 1,270 / 1,520 mm Ground clearance: 60 mm Net weight (without battery): 6,790 kg Battery weight: 1,760 kg Turning radius: 1,698 ...
For sale is a modern narrow-aisle forklift/system forklift with a elevating cab, which has been specially designed for the storage and retrieval of loads as well as picking in very narrow storage aisles. The device is in very good condition and is ideal for high-bay warehouses with high handling capacity. Technical data Type: Order picking stacker for high-bay warehouses Guide System: Induction Loop Year of manufacture: 2023 Serial Number: 6959414 Nominal load capacity: 1,500 kg Load center of gravity: 600 mm Lifting height: 10,250 mm Platform lifting height: 8,600 mm Picking height: 10,200 mm Mast Type: Triplex Overall height (mast retracted): 4,460 mm Mast height (extended): 11,040 mm Overall length (head retracted): 3,846 mm Vehicle width: 1,270 / 1,520 mm Ground clearance: 60 mm Net weight (without battery): 6,790 kg Battery weight: 1,760 kg Turning radius: 1,698 ...
Vertical panel-sizing saw Brand: Putsch Type: SVP 145 M New machine Description: The SVP 145 M is a vertical panel saw for cutting panels in vertical and horizontal direction. The frame of the saw is completely welded and has a support grid for the workpieces to be processed, consisting of aluminium strips and plastic inserts. The automatic grid displacement ensures that the saw blade does not hit the support bars during horizontal cuts. The lower workpiece supports consist of aluminium soles and plastic inserts. For the easy movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and the saw carriage can be moved and adjusted by hand, the saw beam can be fixed in 5 vertical sawing positions for this purpose. The comfortable insertion and removal of the saw head is ensured by an ergonomically shaped handle. Standard equipment: - El ...
GP Equipment BBS30-300-CW10P banana bucket – 300 mm – CW10 – 2017 Specifications: Brand: GP Equipment Type: BBS30-300-CW10P Year of construction: 2017 Serial Number: 171294001 Type of attachment: banana tray / cable tray Working width: approx. 300 mm Content according to type plate: approx. 92 litres SAE Own weight: approx. 89 kg Quick change connection: CW10 CE marking available Features: Heavy duty welded steel version Narrow and deep body construction Wear parts on the underside and sides Suitable for digging narrow and deep trenches Suitable for cable, pipe, drainage and earthworks , among other things Due to the narrow design, it is suitable for work where a limited slot width is required Particularities: Used condition Provided with normal signs of wear, wear and surface rust See photos for further condition and execution Auction-ID: A1-47396-2 ...
The CE20 belongs to the series of our electrically operated high-pressure machines with a pressure of 200 to 500 bar and a volume flow of 16 to 45 l/min. The standard version has hard rubber tyres with a parking brake at the rear and swivel castors at the front. The "Slim version" has a narrower design and also has narrower rear wheels with a parking brake. The frame consists of hot-dip galvanized and powder-coated sheet metal molded parts with circumferential stainless steel side frames. The standard model has a dimension of 1060 x 760 mm. The "Slim" version has a very compact dimension of 1060 x 500 mm. Both versions are 850 mm high. The standard and slim versions are identical in all other specifications. Similar but no Dynajet, Falch, Hammelmann, Kamat, Kärcher, Oertzen, Uraca, Woma, etc. Available models: ----- CE20-200 50Hz 200 bar 38 l/min. CE20-200 60Hz 170 bar 45 l/min. ...
working length: mm Working width: mm Working height: mm TGT Robby 420 universal, the glass mounting device for working without Effort The TGT Robby 420 420 universal is battery powered and its Telescoping movements, crane arm forward (work 1,25 m in front of the wheels), adjust large discs sideways exactly (100 mm to the right 100 mm to the left), and the lift head to Tilt 60 ° and turn 180 ° upwards, are using a Cable remote control made. Equipped with an Accusauganlage carrying capacity approximately 500 kg the TGT Robby 420 universal is the safe response aid. Of course, the lift head can also be rotated 360 ° manually. moreover The lift head can be equipped with an articulated joint (Turn the disc completely sideways) to drive through narrow doors to be able to. The TGT Robby 420 universal is also with a strong front-wheel drive equipped, so the effor ...
Jungheinrich EKX 513 High Rack Stacker / Three-Way Stacker For sale is a used Jungheinrich EKX 513 high-rack forklift or electric picking/three-way forklifts for high-bay warehouses. The device comes from ongoing operation and is currently still in use. The truck is expected to be available from July. Viewing possible at any time by arrangement. Particularly noteworthy is the new Jungheinrich battery from 12/2025 with 80V and 465 Ah. In addition, an MPSA 3000 mobile personal protection system from Lagertechnik Müller und Partner is installed. Technical data Manufacturer: Jungheinrich Model No.: EKX 513 Type: Electric order picking/three-way stacker Year of Make: 2007 Operating hours: approx. 4,100 h Net weight: approx. 7.5 tons Battery voltage: 80 V Battery capacity: 465 Ah Battery Year/Week: 12/2025 (NEW) Battery weight: approx. 1,238 kg Main stroke: 5,500 ...
range L-W-H: 1250 x 460 x 940 mm weight: 88 kg : 9 St. Mobile tool trolley, scope of delivery: Workbench with wooden worktop 2 x 125 mm. Heavy duty castors with brakes. 2 x 125 mm. Heavy fixed roles. 1 x sturdy handle made of solid steel. 1 x central locking for all drawers. 1 x 2 buttons. Very nice solid wood panel. Solid ball-bearing guides. (Double bearing) All drawers can be opened 100%. Internal dimensions of the upper wide drawer 105 x 40 x 10 cm. Inner dimensions of the upper 6 narrow drawers 49 x 40 x 7 cm. Inner dimensions of the lower 2 narrow drawers 49 x 40 x 23.5 cm. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Electric narrow-aisle forklift for warehouse operation with large lifting heights. Designed with lift mast, fork carriage, driver's seat with seat and canopy as well as control console. The original area of application is storage and retrieval in high-bay warehouses, narrow-aisle racking systems and order picking. Important note on the condition: The vehicle is neither roadworthy nor operational. The gearbox is defective. Prior to the auction, several components were removed and are not part of the lot. Removed or missing components: Battery Control panel Scanner further components were taken from the machine The extent of the missing parts is not fully documented. A viewing before submitting a bid is expressly recommended. The vehicle is suitable for repair or as a spare parts donor. Technical data according to the nameplate: Nominal drive power: 7.0 kW Battery v ...
Sliding table saw Brand: Panhans Type: 680 100 New machine Technical data: Trolley length 3200 mm Cutting length 3400 mm Cutting height max. 155 mm at 90 ° 105 mm at 46 ° Cut width Width stop 1030 mm Saw blade max. Ø 450 mm Saw blade under table retractable Ø 400 mm Table size cast table top 1200 x 655 mm Table extension plus. 750 x 655 mm Table extension 1200 x 655 mm Table height +/- 20 mm 900 mm Main saw blade speed 3000/4000/5000/6000 rpm Net weight approx. 1051 kg Technical description: Solid German mechanical engineering For trimming, cutting to length, formatting, miter cutting, etc. Dimensionally stable and self-supporting machine body manufactured as a stable frame welded construction from thick-walled steel profiles, laser-processed sheet steel parts and mechanically processed The torsion-resistant and finely planed cast table top is built on the ...
Panel sizing saw, vertical Brand: Putsch Type: SVP 420 M New machine Description: The SVP 420 M is a vertical panel saw practical for cutting panels vertically and horizontally. The saw frame is completely welded and has an attachment grate for the workpieces, consisting of aluminum strips and plastic inserts. The automatic grate movement ensures that the saw blade does not hit the contact strips in the case of horizontal cuts. The lower workpiece supports consist of aluminum soles and plastic supports. For simple movement of the workpieces, the machine is equipped with retractable transport rollers. The saw beam and saw carriage can be moved and adjusted by hand, the saw beam can be fixed at 5 vertical sawing positions. The comfortable entry and exit of the saw head is ensured by an ergonomically shaped handle. Standard features: - electrically driven, automatic shift gate ...
Tenoning spindle: 2 Stk. Number of milling agregates: 5 St. Spindle diameter: 50 mm Control: Weinig, PC-Nexus Weinig Unicontrol 10 NC Window System — Optional: Extensive Tooling Set ----------------------------------------- Optionally available (at an additional cost): IV 68 Wood, Wood/Aluminum IV 78 Wood, Wood/Aluminum IV 68 Entrance Doors Manufacturers Technical Description: ----------------------------------------- Item 1: Weinig Unicontrol 10 NC Window System ----------------------------------------- Cross-cut Saw -------------------------------------------------------------- with laser alignment light, motor power: 3 kW, spindle diameter: 40 mm, spindle speed: electronically variable (with brake) from 3,000 to 6,000 rpm. Max. tool cutting circle: 400 mm Axial adjustment: 150 mm via NC axis Radial adjustment: pneumatic, to 8 positions for top edge rounding Horizontal bottom roundin ...
weight max.: 3000 kg speed: max. 10.0 km/h Number of working hours: 10.015 h weight of the machine ca.: ca. 1000 kg Tugs were used by BOSCH (DE) Battery was boosted” in 04/2024 Maneuver and transport agilely and safely in narrow aisles The P30 electric tractor and platform truck from Linde Material Handling is suitable for flexible and safe transport processes on small and medium-sized businesses Distances – even and especially when there is little space available. The Vehicle has precise and self-centering power steering that the driver safely controlled with an ergonomic two-handed handle. Also relieved The compact design of the P30 allows you to maneuver in narrow aisles. The powerful three-phase motor accelerates quickly to the maximum Speed. Ensure a comfortable and secure stand while driving the adjustable backrest and the fully suspended standing platform non-slip floor cove ...
Consisting of: - 54x CONTINENTAL Mantel RIDE Tour - 50x TR03 Universal Tail Narrow with Teardrop RAL 7003 - 25x BP03 Universal End Piece Narrow Zinc Plated Auction-ID: A1-51241-8
HIGHTOP HH12 Mini Excavator – New – 1200 kg – 3 Buckets – Joysticks HIGHTOP compact mini excavator model HH12, in new condition, ideal for earthworks, foundations, outdoor landscaping and narrow accesses. ⚙️ Features: Operating weight: 1200 kg Width: 100 cm Engine: KOOP Diesel Power: 10 HP (7 kW) Starting: Electric Controls: Side Sticks Deflection: Yes Inverted cylinder: Yes Digging depth: ± 185 cm Translation: Rubber tracks Grading Blade: Yes Equipment: Mechanical quick coupler Double-acting hydraulic outputs Work light Side Sticks 3 buckets: 20 cm 40 cm 100 cm Extra bucket included (see photos) Status: New machine, never used or very little. No visible damage. Hydraulics, structure and accessories in excellent condition. i️ Additional information: Compact machine, ideal for narrow passages Simple and ergonomic operation Ready to use Auction-ID: A3-46111-33122
maximum number of results exceeded
please refine your search
110 € 
