132,173 used machines on RESALE, but how to find them? Machine Search
Dimensions (L/W/H): 0x0x0 mm Weight: 57 kg Total power requirement: 0,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 0x0x0 mm Weight: 60 kg Total power requirement: 0,4 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Dimensions (L/W/H): 1920x4685x6300 mm Weight: 2500 kg Total power requirement: bis max. 30 kw The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
NEW !industrial axial fan 910mm Ø 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 NEW !industrial axial fan 910mm dia 29000m3/h Ziehl-Abegg FC091-ADS.7M.V7 /ct2310/ 3PCS IN STOCK Diameter 910mm 400V 29000m³/h 680/520 rpm manufacturer : Ziehl-Abegg FC0910-ADS.7M.V7 VT0141 Power supply: 400V RoHS compliance: Yes Diameter (propeller or turbine): 910mm Flow rate (m³/h): 29000 Air pressure: 70-140pa Frequency: 50/60Hz Protection rating: IP.54 Current consumption (amperes): 3.6/2.3 Mounted on bearings Curved aluminum blades 7pcs "replaceable" Noise level (decibel): 83 Power consumption (watts): 1250W/660W Airflow direction: Propeller towards the mounting points Air temperature range: -25°C to +60°C Connection type: Terminal box Speed (rpm): 680/520 Weight: 55kg Overall dimensions: B1 = 337mm B2 = 20mm, D1 = 1005mm, D3 = 102
Industrial Axial Fan 910 ø 29000m3/h Ziehl-Abegg FN091-MDS.7M.V5P1 Extractor Fan Manufacturer: Ziehl-Abegg, Güntner VT01405 Type: FN091-MDS.7M.V5P1 Condition: NEW!, TESTED Description: Axial, protective grille, 3-phase, 2-speed dahlander fan. 910mm blade diameter. Airflow: 29000m3/h Pressure: 20- 150,- PA Motor: 3~ 400VAC (±10%) Δ/Y 50Hz, Power: 0,50/0,35 kW Power consumption: 1,25/0,71 A Power supply: 400/3/50 V/Ph/Hz Protection: IP54 Rotation speed: 550/450 rpm Fan: 7-blade, toothed blades Blade diameter: 910 mm Blade material: galvanized metal Overall dimensions: 930x270 mm (diameter x thickness) Mounting size (split circle): 940 mm Operating temperature min/max -25°C/+70°C Weight: 47kg
NEW!Ziehl-Abegg FC080-SDS.6K.V7 Axial fan 800mm dia.23500m3/h ventilation fan NEW! Industrial Axial Fan 800mm dia. 23500m3/h 180pa Ziehl-Abegg FC080-SDS.6K.V7 VT0121 5pcs in stock Brand: Ziehl Abegg Type: FC080-SDS.6K.V7 Year of manufacture: 2023 - Flow rate (m³/h): 23,500 - Air pressure 170Pa max The range of applications of this Ziehl-Abegg spiral fan is very wide: air extraction, drying, air recirculation, air supply. 3-phase 2-speed motor 1030W/400W, 870/630rpm 400VAC (±10%) Δ/Y 50Hz, 1.65/1.05A, , IP54 - - Frequency: 50/60 Hz - Power supply: 400 V 50Hz IP54 - Connection type: terminal box - Diameter (impeller or turbine): 800 mm - Degree of protection: IP54 - Air flow direction: impeller towards mounting brackets - Air temperature range: -25°C to +55°C - Speed (RPM): 890/650 - Current (A): 2.7/1.6 - 7-blade impeller made of galvanized sheet ...
FRAMECAD F300i roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is the perfect choice for the efficient production of lightweight steel structures. This is because the FRAMECAD F300i enables the precise forming of C- and U-type cold-formed profiles of various dimensions (89 mm as standard), which are used in, among others, partition walls and bathroom modules. The machining process is fully automatic. The strip with a maximum thickness of 1.2 mm is uncoiled from the coil towards the workspace with a special roll forming system. Each profile is precisely formed, cut, punched, and marked, making them ready for direct assembly with screws. The FRAMECAD F300i roll forming machine is controlled via a touch panel with an intuitive interface. The full integration of advanced design software with the controller ...
Items Dishwashers Manufacturer: Hobart Type: FXS Year of construction between 2009-2013 unchecked / from warehouse resolution Sale only to dealer or export
Items Dishwashers Manufacturer: Hobart Type: FXS Year of construction between 2009-2013 unchecked / from warehouse resolution Sale only to dealer or export
FRAMECAD TF550 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact TF series (Truss and Frame) production line is an excellent choice for the mass production of fabricated solutions for the residential and commercial buildings. This is because the FRAMECAD TF550 enables the production of C- and U-type cold-formed profiles in various sizes (150 mm as standard), used as rafters, trusses and steel structures in a wide range of building projects. The entire production cycle is fully automatic. The strip, with a maximum thickness of 1.6 mm, is uncoiled from the coil towards the workspace, where it is machined by means of a special roll forming system. The profiles are accurately formed, cut, punched, dimpled and marked, making them ready for simple assembly with screws. The machine is operated via a touchscreen panel with an in ...
FRAMECAD FL650 roll forming line was built in 2009 in New Zealand by Framecad Solutions Ltd. This state-of-the-art and compact production line is used in the production of precision C- and U-type cold-formed profiles, used as steel floor joists in a wide range of construction projects. The entire machining process is fully automatic and is performed with the highest accuracy. The strip, with a maximum thickness of 1.95 mm, is uncoiled from the coil towards the workspace with a roll forming system. Each profile is precisely formed, cut, punched and individually marked. Large service holes are also made to facilitate the assembly of electrical, HVAC and plumbing systems. The FRAMECAD roll forming line is operated via a touchscreen panel with an intuitive interface that significantly simplifies the daily work of the operator. The full integration of advanced design software with the cont ...
Technical data: Number of printing units: 8 Maximum printing width: 1270 mm Maximum web width: 1320 mm Minimum web width: 300–570 mm (depending on unwind/rewind specification) Minimum repeat length: 360 mm (ARUN system: from 380 mm) Maximum repeat length: 800 mm Repeat length adjustment: steps of 0.1 mm; correction ±2% Anilox roller internal diameter: 136,989 mm Anilox roller circumference: 500 mm Sleeve length: 1350 mm Maximum mechanical speed: 500 m/min (or 400 m/min for basic unwind/rewind) Operating printing speed depends on substrate, inks, transfer, plate type, image, screen ruling, anilox volume, etc. Corona treatment unit (Ahlbrandt) Drying Gas Non-stop shafted unwind 1000 mm Non-stop shafted rewind 1000 mm Automatic viscosity control (INKSPEC) Additional drying enhancements (ECLIPSE gas burners) Infeed/outfeed extensions Automatic sleeve change systems ...
Number of printing decks 8 Max. print width 820 mm Max. material width 850 mm Min. material width 300 mm Min. print length 260 mm Air core diameter 76,510 mm Repeat steel lock 310 mm Max. print length 600 mm Printing length setting In steps of 0.1 mm; set print length max. correction +/- 2 % Anilox cylinder Inner diameter 105,158 mm Perimeter 400 mm Sleeve length 900 mm Max. mechanical speed of the machine 300 m/min Operational printing speed of the machine It depends on the type and quality of the printed material, printing inks, ink transfer, printing length, printing plates, type of the printed motive: cross lines - picture screen density, capacity of anilox cylinders, reprint of inks, varnish, etc., environment temperature and doctor blade type. OPERATION EFFICIENCY Max. mechanic speed 300 m/min FALCON - automatic setting of print registers and impressions Soph ...
Code: 0266 Brand: ROBOPAC Model: ROTOPLAT 106/FRD - CE Standard Stretch wrapping machine with rotary table for wrapping pallets, boxes, cabinets and various materials various materials, various sectors such as food, beverages, detergents, chemicals, construction, furniture, logistics and various - CE Standard With loading ramp Rotating table diameter mm 1650 Film tension adjustment Load capacity 2000 kg Rotating plate diameter mm 1650 Clutched reel carriage FRG Table rotation speed rpm 5/12 Height mm 2100 Ascent/descent cycle Ascent/descent cycle only Power supply volt 220/50 Total power Kw 1,4 Overall dimensions: mm 1650 x 2600 x2700 h Weight kg 450
Professional strapping machine with internal frame dimensions of approx. width 1050 x height 800 mm from a renowned manufacturer, designed for high speed and trouble-free operation. Equipped with an ergonomic and uncomplicated bobbin changing and threading system. -Belt width from 8 to 19 mm possible according to manufacturer specifications, 12 mm tape roller mounted. -Up to 24 strapping per minute possible. -Strap tension adjustable from 50 to 1200 N. -Manual start via hand button or stable foot switch / Alternatively automatic operation selectable (sensor in the table top). -Equipped with ergonomic casters on the table surface. -Closure type: Welding in the heating wedge method. -Automatic tape threading. machine can be moved via castors. -230 V / 50 Hz. -Documentation consisting of operating instructions, spare parts lists and circuit diagrams. The machine can be demons ...
injection molds set for the production of house facade, a total of 4 pcs of large molds with a total weight of 12 tons
-Vat for lifting kneader Kemper F 150 ASL -Stainless steel boiler -Car overhauled and repainted -2 new roles -Boiler diameter outside: 103,5cm -Boiler height inside: 50cm
Lift system, Megamat FSE 7.1, approx. 6.91m high, min. 331kg / Shelf, Shelf: approx. 3.06m x 81cm – used - : Price ex location: 18.500.-€ (net), dismantled, packed and loaded, plus transport and reassembly! Manufacturer: Megamat Type: FSE 7.1 3060/816-6910 Device number: 500002536 Year of Make: 2008 Permissible total load capacity: 70,000kg Load capacity per tray: at least 331kg (possibly also 414kg or 536kg, depending on which type of tray is installed, unfortunately cannot be clarified in advance). Number of shelves: approx. 50 pieces Shelf size: 3060 x 816mm Device dimensions: Width: approx. must be submitted later (width should be approx. 3,450mm) Depth: approx. must be submitted later (depth should be approx. 3,200mm) Height: approx. 6.91m 3/N/PE 230/400V, nominal operating current 17.8A, fuse supply line: 25A Condition: good Available: from approx. End o ...
Cooking kettle Fessmann Nova 400, 400 liters, gas heated, MC control, stainless steel version,
Workbench drilling machine FLOTT TB 6/I, II, III One-piece spindle - male cone B12 Manual spindle exit: 65 mm Speed: from 450 to 9000 RPM Throat depth: 160 mm Mini height in low position: 60 mm Max height in height position: 180 mm Head rotation around the column Voltage: 380 V Width: 300 mm Depth: 600 mm Total height: 700 mm Weight: approx 70 kg
Falch Trailjet 15 Pressure Washer 500bar , 95 °C Mint condition - Manufacturer: Falch - Type: Trail Jet 15 - Registration date 07/21 - Working pressure: 500bar - Volume flow: 15 l/min - Cold and hot water up to 95 °C - Operating hours: approx. 481 h - German papers Accessories: - Optional Price excluding VAT! Net price: 32.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scater - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in. CLIC Industrial Rental For 20 years, we have specialized in the field of high pressure, trade, stone cleaning, industrial cleaning and much more.
Product number: 2357 Model: Slicer with Franz slice unit Type: AE0148179 Serial number: 044 Year of construction: 2018 Capacity: max 120 strokes/min. Cutting thickness: max 20 mm Strip cutter: Franz MST64/545 OS Air pressure: 6 Bar, 72 Nl/min. Power: 3 x 400V, 50Hz, 5.5kW Weight: 1100 kg
sheet width: 2035 mm plate thickness: 6 mm distance between columns: 2000 mm total power requirement: kW weight of the machine ca.: t dimensions of the machine ca.: m motorized limit stop behind foot switch Technische Daten / technical details: Schnittleistung (Blechdicke) / max. cutting capacity (thickness of sheet) 6 mm Schnittlänge / max. cutting length 2035 mm Hinteranschlag / arrester behind 1000 mm Ständerweite / distance between columns 2000 Mm Antriebsleistung / drive capacity 11 kW Gewicht der Maschine / weight 3500 kg Technische Daten, Zubehör und Beschreibung der Maschine sind unverbindlich - Technical data, accessories and description of the machine are not binding. The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
Falch T3H Pressure Washer 300bar, 98 °C - Manufacturer: Falch - Type: T3 H - Year: 2008 - Working pressure: 300 bar - Volume flow: 21 l/min - Generator: 230 V - Cold and hot water up to 98 °C - Operating hours: approx. 3158 h - New HD pump Accessories: - Optional Price excluding VAT! Net price: 19.900,00€ Additional options (subject to surcharge) - Europe-wide delivery - Falch Scatee - Pistols - Hoses - Nozzles For more data, please refer to the pictures. The item can be viewed and tested before purchasing. Device Location: 3232LN Brielle, Netherlands We are also happy to accept your machine in trade-in.
Punching machine X5 Manufacturer: FINNPOWER YEAR: 2006 Desktop... 2530x1270mm Nominal pressing force... 056 Axis X ... 2584mm Axis Y ... 1317mm thickness of the cut material ... 8mm Magazine slots ... 20 Control Fanuc ... Oi-PC Machine weight ... 10500kg L x W x H ... 7600x6980mm The machine is in good condition, possible to test under power.
FlowCook completely stainless steel suitable for thermo-oil heating Belt length ± 13,000 mm Track width ± 600 mm Executing belt Belt washing system electric lifting device for the cap Total dimensions (L x W x H) : ± 15,000 x 2,200 x 3,000 mm
We still have 2 pieces in stock. Price ex stock and per piece
PLC control, still 1 piece in stock, price from stock pr piece
Central processor unit CPU, also with model number: 170174 recognizable, price ex stock
FINN-POWER SG-6 turret punch press was built in 1999 in Finland by LILLBACKA CORPORATION. The machine has been regularly serviced throughout its service life. The FINN-POWER Shear Genius SG6 was created as an answer to the daily challenges of modern business. This system is designed for precision punching, stamping and cutting of sheet metal with a maximum length of 3061 mm and a width of 1528 mm. The integration of all the necessary equipment in a single place enables significant reductions in production costs as well as overall working time. All machining processes are performed fully automatically, in a single work cycle. The loading system separates a single sheet from the stack and fixes it in pneumatic clamps. The holes are punched by means of reliable tools taken from the 20-station turret. Parameters such as stroke depth, stroke length and stroke speed can be fully adapted ...
This mixer is used but has been cleaned and tested This HL662-1STD is ideal for commercial kitchens thanks to its 60 qt. bowl, stainless steel bowl guard, and dough hook. With an ergonomic design and superior functionality, you can make repeat recipes consistently and create new ones with ease and efficiency. This unit requires a 200/240V electrical connection for operation. Ergonomic Swing-Out Bowl Featuring an ergonomic swing-out bowl, this mixer makes it easy to load and unload ingredients. With a single point bowl installation, you can easy mount or remove the bowl as needed. Plus, the bowl interlock ensures that the mixer bowl is properly in place before the mixer will operate for added safety. Dough Hook This mixer comes with a (1) "ED" dough hook so you can mix up to 90 lb. of dough at once. The 2.7hp motor, gear transmission, and safety mechanism system provide plenty ...
- 2 saeulen-execution - Working area Durchm. u. Square 420 mm - Material feed length 3 - 600 mm single feed , - Cutting speed infinitely variable 12-100 m/min. - Heegeband dimensions 6050 X 40 X 1.3 mm - Drive 9.5 kW - Dimensions L/BH 2050 x 2725 x 2080/ 2530 mm - Weight: 4000 kg - Machine dimensions: L x W 1500 x1900 mm - Weight: approx. 1700 kg
Thermopöl Pump Magnetic Pump for Daub Heuft Thermal Oil Furnaces
I sell a bottom grinding machine Butfering FBS2 1100, built in 1977. Konfigurazion Shoe - Shoe. Working width 1100mm. Total weight 4000kg. Suitable for line. Construction with fixed work table height.
used
Qty. 1 Second-hand 8 Colour Gear Machine Mfc.: Comiflex Vale 1208 Type: 8 Colour Gear Machine Built: 2011 The Printer is in immaculate showroom condition and has been serviced only by the manufacturer. Fully Automatic (Gearless), with the following technology: Ink Pump – Phonematic with Autowash Camera System – FIFE Kindly refer to the machine specifications below: Material width – 1280 mm Print width – 1200 mm Minimum repeat length – 380 mm Maximum repeat length – 840 mm Machine speed – 300 m/min. 8 Aniloxes: Face Length – 1260 mm Engrave Length – 1240 mm OD – 171.88 mm ID – 149.722 mm 8 sleeves: ID – 114.708 mm Face Length – 1210 mm
number of controlled axis: - workpiece weight: - kg throat: - mm total power requirement: - kW weight of the machine ca.: t dimensions of the machine ca.: m The data for this ad was created with ModulMWS - the software solution of LogoTech oHG.
I sell a 4-side brush machine suitable for windows, turrets, tables, etc. Futura MS120 Y1 X2, built in 2005 Working width 1200mm Working height 200mm Total weight 2500kg Configuration: Side grinding heads left - right H.170mm 2 underheads left - right nylon B.140mm Oscillating top head B.260mm Large grinding heads top - bottom B.1150mm Machine together with all the heads on the picture. Available the same.
A Complete Turnkey Solution: ‘FIVES DMS Montbard & SMS MANNESMANN MEER’ 8" Seamless Tube Plant Once known as Vallourec Bearing Tubes Montbard, this facility can produce hot and cold rolled seamless high precision tubes up to 203 mm OD and 2 to 55 mm wall thickness based on a long-established state-of-the-art manufacturing process. Make (main): · FIVES DMS MONTBARD · SMS MANNESMANN MEER Mothballed since: 2025 Capacity: 80,000 tons per year Processed material: CrMo, CrMn alloyed steels Starting material: 80 – 240 mm round billets End products: o Hot Rolled Tubes up to 203 mm OD; 8.0 - 53 mm WT o Cold Rolled Tubes 25 - 102 mm OD; 2.0 - 20 mm WT Consists of: Billet Yard Hot Rolling Mill incl. Furnaces, Piercer, Elongation, Calibration, Sizing mill, Cooling bed (7) Cold Pilger Mills Heat Treatment Furnaces incl. Quenching ...
Film Wrapper Machine – TFW67 General Information: - Manufacturer: Tetra Pak - Model: TFW67 - Year of Manufacturing: 2004 - Condition: Used - Machine Type: Film Wrapper / Secondary Packaging Machine System Overview: The Tetra Pak TFW67 Film Wrapper is a high-performance secondary packaging machine designed for automatic film wrapping of carton packs in demanding industrial environments. Built for continuous operation, the TFW67 ensures reliable pack collation, precise film application, and consistent sealing quality, making it a proven solution in dairy and beverage production lines. This model is widely recognized for its robust construction, stable high-speed performance, and seamless integration into existing Tetra Pak packaging systems. Technical Specifications: - Packaging Formats - 4 × 1 - 4 × 2 Output Capacity: - Up to 9,000 packs per hour Ope ...
maximum number of results exceeded
please refine your search
